Scribd Logo
Upload

Welcome to Scribd!

  • 157 views

    SEMINAR On Ceramic Brakes

    Uploaded by

    Amar Keni
    Ceramic brake discs offer several advantages over traditional cast iron discs. They are over 61% lighter, reducing vehicle weight by up to 20kg. This improves acceleration, lowers emissions, and enhances shock absorber response. Ceramic discs maintain consistent frictional values in both dry and wet conditions. Porsche developed PCCB ceramic brake discs that stop a car from 100km/h to 0 in under 3 seconds, demonstrating their braking power. Ceramic materials provide strength and abrasion resistance through the use of silicon carbide in an aluminum matrix composite coated with a special ceramic layer.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd

    SEMINAR On Ceramic Brakes

    Uploaded by

    Amar Keni
    157 views4 pages
    Ceramic brake discs offer several advantages over traditional cast iron discs. They are over 61% lighter, reducing vehicle weight by up to 20kg. This improves acceleration, lowers emissions, and enhances shock absorber response. Ceramic discs maintain consistent frictional values in both dry and wet conditions. Porsche developed PCCB ceramic brake discs that stop a car from 100km/h to 0 in under 3 seconds, demonstrating their braking power. Ceramic materials provide strength and abrasion resistance through the use of silicon carbide in an aluminum matrix composite coated with a special ceramic layer.

    Original Description:

    semi

    Original Title

    SEMINAR on Ceramic Brakes

    Copyright

    © © All Rights Reserved

    Available Formats

    DOCX, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Ceramic brake discs offer several advantages over traditional cast iron discs. They are over 61% lighter, reducing vehicle weight by up to 20kg. This improves acceleration, lowers emissions, and enhances shock absorber response. Ceramic discs maintain consistent frictional values in both dry and wet conditions. Porsche developed PCCB ceramic brake discs that stop a car from 100km/h to 0 in under 3 seconds, demonstrating their braking power. Ceramic materials provide strength and abrasion resistance through the use of silicon carbide in an aluminum matrix composite coated with a special ceramic layer.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    157 views4 pages

    SEMINAR On Ceramic Brakes

    Uploaded by

    Amar Keni
    Ceramic brake discs offer several advantages over traditional cast iron discs. They are over 61% lighter, reducing vehicle weight by up to 20kg. This improves acceleration, lowers emissions, and enhances shock absorber response. Ceramic discs maintain consistent frictional values in both dry and wet conditions. Porsche developed PCCB ceramic brake discs that stop a car from 100km/h to 0 in under 3 seconds, demonstrating their braking power. Ceramic materials provide strength and abrasion resistance through the use of silicon carbide in an aluminum matrix composite coated with a special ceramic layer.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    of 4

    SEMINAR ON

    CERAMIC DISK BRAKES

    Abstract
    Until now brake discs have been made up of grey cast iron, but these are heavy which
    reduces acceleration, uses more fuel and has a high gyroscopic effect.
    Ceramic disc brake weigh less than carbon/carbon discs but have the same frictional values with
    more initial bite and cost a fraction of price. Carbon /carbon discs are used only in Formula 1
    racing cars etc, because it is so expensive. More over ceramic brake discs are good even in wet
    conditions which carbon / carbon disc notoriously fails to do.
    But comparing their weight, you will see right away that we are looking at two different worlds,
    with ceramic brake discs more than 61 per cent lighter than conventional cast iron discs. In
    practice this reduces the weight of the car, depending on the size of the brake discs, by up to 20
    kg. And apart from saving fuel, resulting in better and lower emission for the same mileage, this
    also means a reduction in unspring masses with a further improvement of shock absorber
    response and behaviour. Another is the manufacturer can add more safety features without
    adding to current weight.
    The ceramic material is created when the matrix carbon combines with liquid silicon. This fiber
    reinforced ceramic material cools overnight and the gleaming dark grey break disk is ready.
    Resin is a binder, which holds the different constituents together.
    Resins are of two types:
    1.Thermosetting resins
    2. Thermoplastic resins

    Thermoplastic resins are those, which can be softened on heating harden on cooling. Repeated
    heating and cooling does not affect their chemical nature of materials. These are formed by
    addition polymerization and have long chain molecular structure.
    Thermosetting resins are those resins which, during moulding process (by heating) get hardened
    and once they have solidified, they cannot be softened i.e. they are permanent setting resins.
    Such resins during mouldings, acquire three dimensional cross linked structure with
    predominantly strong covalent bonds. They are formed by condensation polymerization and are
    stronger and harder than thermoplastic resins. They are hard, rigid, water resistant and scratch
    resistant.
    Earlier brake disc have been made of grey cast iron, but these are heavy which reduces
    acceleration, uses more fuel, etc. The new technology developed by Freno Ltd uses metal matrix
    composite for the disk, basically an alloy of aluminum for lightness and silicon carbide for
    strength. However it was found that, the ceramic additive made the disk highly abrasive and
    gave a low and unstable coefficient of friction. So it was realized that the surface had to be
    engineered in some way to overcome this problem. After experiments, Sulzer Metco Ltd found
    an answer in the form of a special ceramic coating. They developed thermal spray technology as
    well as manufacturing plasma surface engineering machinery used for the task and coating
    materials.
    In use, the ceramic face requires a special carbon metallic friction pad, which deposits a layer of
    material on the brake disc. This coupling provides the required conditions of exceptional wear
    resistance, high and stable coefficient of friction.
    The coated matrix composite discs were first used on high performance motor cycles, where the
    reduced gyroscopic effect had the additional advantage of making the cycles easier to turn.
    Another company named Lanxide used aluminium as the disc material. To provide necessary
    abrasion resistance, aluminium discs have to be reinforced with a ceramic material, hence metal
    composite. They used silicon carbide also to increase the strength.
    Porsche Ceramic Disc Brakes (PCCB):
    After a long period of research and tests Porsche has developed new high performance disc
    brakes, P C C B (Porsche Ceramic Composite Brakes). Porsche has succeeded as the first car
    manufacturer in the world to develop ceramic brake discs with involute cooling ducts for an
    efficient cooling. The new brake system offers a substantial improvement in the car braking
    technology and sets entirely new standards in terms of decisive criteria such as braking response,
    fading stability, and weight and service life.

    PORSCHE CERAMIC COMPOSITE BRAKE


    Porsche's new brake system also offers obvious advantages in emergencies at low speeds: In such
    a case emergency application of the brakes with PCCB technology does not require substantial
    pedal forces or any technical assistance serving to build up maximum brake forces within
    fractions of a second. Instead, the Porsche Ceramic Composite Brake ensures maximum
    deceleration from the start without requiring any particular pressure on the brake pedal. And the
    new brake system is just as superior in its response under wet conditions, since the new brake
    linings cannot absorb water in the same way as conventional linings. The final point, of course, is
    that the cross-drilled brake discs help to optimize the response of the brakes also in wet
    weather.The process involves heating carbon powder, resin and carbon fibers in a furnace to
    about 1700 degree Celsius and is a high vaccum process.
    1. Ceramic brake discs are 50% lighter than metal brake discs. As a result, they can reduce the
    weight of car by up to 20kg. In case of a high speed ICE like train with 36 brake discs, these
    savings amount to 6 tons. And apart from saving fuel, this also means a reduction in unsprung
    masses with a further improvement of shock absorber response and behavior.
    2. The ceramic brake disc ensures very high and, in particular, consistent frictional values
    Porsche ceramic brake discs, a car was able to decelerate from 100Km to 0Km in less than 3
    seconds. In the case of Daewoo’s Nexia, it takes about 4 seconds to stop the vehicle.

    You might also like