Scribd
Upload
72 views4 pages

Transient and Steady-State Response Analyses: TR Ss

The document discusses transient and steady-state responses in control systems. It defines transient response as the behavior from the initial to final state, and steady-state response as the behavior as time approaches infinity. For a first-order system represented by an RC circuit, the output in response to a unit step input is an exponential curve that reaches 63.2% of its final value in one time constant. In response to a unit ramp input, the steady-state error equals the time constant T. The unit impulse response is an exponential curve that decays to zero.

Uploaded by

morny
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
72 views4 pages

Transient and Steady-State Response Analyses: TR Ss

The document discusses transient and steady-state responses in control systems. It defines transient response as the behavior from the initial to final state, and steady-state response as the behavior as time approaches infinity. For a first-order system represented by an RC circuit, the output in response to a unit step input is an exponential curve that reaches 63.2% of its final value in one time constant. In response to a unit ramp input, the steady-state error equals the time constant T. The unit impulse response is an exponential curve that decays to zero.

Uploaded by

morny
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 4

Transient and Steady-State Response Analyses

Transient Response and Steady-State Response: The time response of


a control system consists of two parts: the transient response and the
steady-state response. By transient response, we mean that which goes
from the initial state to the final state. By steady-state response, we mean
the manner in which the system output behaves as t approaches infinity.
Thus the system response c(t) may be written as
c(t) = ctr(t) + css(t)
Where the first term on the right-hand side of the equation is the transient
response and the second term is the steady-state response.
Absolute Stability and Steady-State Error: In designing a control
system, we must be able to predict the dynamic behavior of the system
from knowledge of the components. The most important characteristic of
the dynamic behavior of a control system is absolute stability—that is,
whether the system is stable or unstable.
Important system behavior (other than absolute stability) to which we
must give careful consideration includes steady-state error. Since a
physical control system involves energy storage, the output of the system,
when subjected to an input, cannot follow the input immediately but
exhibits a transient response before a steady state can be reached. The
transient response of a practical control system often exhibits damped
oscillations before reaching a steady state. If the output of a system at
steady state does not exactly agree with the input, the system is said to
have steady state error. This error is indicative of the accuracy of the
system. In analyzing a control system, we must examine transient-
response behavior and steady-state behavior.
First-order systems:
Consider the first-order system shown in Figure (2.1 (a)). Physically, this
system may represent an RC circuit, thermal system, or the like. A
simplified block diagram is shown in Figure (2.1 (b)). The input-output
relationship is given by

In the following, we shall analyze the system responses to such inputs as


the unit-step, unit-ramp, and unit-impulse functions. The initial
conditions are assumed to be zero.
Unit-Step Response of First-Order Systems: Since the Laplace
transform of the unit-step function is 1/s, substituting R(s)=1/s into
Equation above, we obtain

Lecture two Page 1


Instructor: ALTRMEZY MOHAMMED SALIH
Expanding C(s) into partial fractions gives

Taking the inverse Laplace transform, we obtain

Final equation states that initially the output c(t) is zero and finally it
becomes unity. One important characteristic of such an exponential
response curve c(t) is that at t=T the value of c(t) is 0.632, or the response
c(t) has reached 63.2% of its total change. This may be easily seen by
substituting t=T in c(t).That is,

Figure (2.1): (a) Block diagram of a first-order system; (b) simplified block diagram.
Note that the smaller the time constant T, the faster the system response.
Another important characteristic of the exponential response curve is that
the slope of the tangent line at t=0 is 1/T, since

The output would reach the final value at t=T if it maintained its initial
speed of response. From Equation above we see that the slope of the
response curve c(t) decreases monotonically from 1/T at t=0 to zero at
t=∞.

Figure (2.2): Exponential response curve.

Lecture two Page 2


Instructor: ALTRMEZY MOHAMMED SALIH
The exponential response curve c(t) shown in Figure (2.2). In one time
constant, the exponential response curve has gone from 0 to 63.2% of the
final value. In two time constants, the response reaches 86.5%of the final
value. At t=3T, 4T, and 5T, the response reaches 95%, 98.2%, and 99.3%,
respectively, of the final value.
Unit-Ramp Response of First-Order Systems: Since the Laplace
transform of the unit-ramp function is 1/s2, we obtain the output of the
system of figure (2.1 (a)) as

Expanding C(s) into partial fractions gives

Taking the inverse Laplace transform, we obtain

The error signal e(t) is then

Figure (2.3): Unit-ramp response of the system


As t approaches infinity, e–t/T approaches zero, and thus the error signal
e(t) approaches T or
e(∞) = T
The unit-ramp input and the system output are shown in Figure (2.3). The
error in following the unit-ramp input is equal to T for sufficiently large t.
The smaller the time constant T, the smaller the steady-state error in
following the ramp input.

Lecture two Page 3


Instructor: ALTRMEZY MOHAMMED SALIH
Unit-Impulse Response of First-Order Systems: For the unit-impulse
input, R(s) =1 and the output of the system of Figure (2.1 (a)) can be
obtained as

The inverse Laplace transform gives

The response curve given by Equation above is shown in figure (


2.4).

Figure (2.4): Unit-impulse response of the system

Lecture two Page 4


Instructor: ALTRMEZY MOHAMMED SALIH

You might also like