Scribd
Upload
17 views

To Drill A 10 MM Hole in Center of 100 MM X 120mm X 10 MM Mild Steel Plate

To drill a 10 mm hole in the center of a 100 mm x 120 mm x 10 mm mild steel plate using Solidworks 2016 software. The objective is to create a 3D model and drawings of the plate with a centered hole to specify dimensions for machining. Solidworks will be used to design the plate and hole placement to achieve the objective.

Uploaded by

Vikas Mani Tripathi
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
17 views

To Drill A 10 MM Hole in Center of 100 MM X 120mm X 10 MM Mild Steel Plate

To drill a 10 mm hole in the center of a 100 mm x 120 mm x 10 mm mild steel plate using Solidworks 2016 software. The objective is to create a 3D model and drawings of the plate with a centered hole to specify dimensions for machining. Solidworks will be used to design the plate and hole placement to achieve the objective.

Uploaded by

Vikas Mani Tripathi
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 1

PRACTICAL 1

OBJECTIVE:- To drill a 10 mm hole in center of 100 mm X 120mm X 10 mm mild steel plate.

SOFTWARE USED :- SOLIDWORKS 2016

You might also like