Ashly Audio, Inc.

| 847 Holt Road | Webster, NY 14580-9103 USA | US toll free: +1-800-828-6308 | tel: +1-585-872-0010 | fax: +1-585-872-0739 | [email protected] | www.ashly.com | Ashly is a division of Jam Industries, Ltd.

5-Year Warranty

GQX−3102 2-Channel, 31-Band Graphic Equalizer

Ashly EQs are well known as the go-to brand for analog GQX-3102 Features: Specifications Note: 0dBu = 0.775 VRMS
processors for any concert application or commercial
pro install. The GQX-3102 features 2-channels of 31-band • Ashly Differentiator: Tunable Hi-Pass Filter (HPF) Frequency Response 20Hz–20kHz, ±0.25dB
1/3-octave EQ, tunable hi-pass filter circuit, switch-select- • 45mm, detented metal shaft faders THD <.01% @ +20dBu
able cut or boost of either 6dB or 15dB and 10-segment, • 12dB/octave, tunable hi-pass filter IM Distortion (SMPTE) <.01% @ +20dBu
2-color LED meter displays, and clip LEDs. The full-throw • True Constant “Q” design Output Hum & Noise -90dBu, Unweighted
45mm faders have a metal-shaft with the center detented • Tight tolerance components for precise ≤3% Channel Separation >95dB @ 1kHz
position utilized as an “on/off” switch for that filter to filter accuracy
minimize noise levels when the filter is not in use. • Precision Wein-Bridge filters Gain Control -∞ to +6dB
• Switchable boost/cut range of ±6 or ±15dB Input
Our graphic EQs utilize Wein-Bridge filters using precision • 10-position, 2-color LED level meter Type Active-Balanced
components and our specially designed summing • Peak LED indicators Impedance 20k Ohms
amplifiers provide extremely accurate response, low • Balanced inputs, Servo-balanced outputs
noise, negligible distortion, and excellent immunity • XLR, TRS and Euroblock connections Max Level +23dBu
to magnetic fields. • Universal 100–240VAC internal power supply Connectors 1/4” (TRS), XLR, Euroblock
• Rider-friendly Output
• Safety/Compliance: cTUVus, CE, FCC, RoHS Type Servo-Balanced
Source Impedance 200 Ohms
Min Load Impedance 600 Ohms
Max Level +23dBu
Connectors 1/4” (TRS), XLR, Euroblock
Filters
Type Constant Q / Wein-Bridge
Number 2 x 31
Bandwidth 1/3 Octave
Tolerance ±3%
Range ±6dB, ±15dB (Switchable)
Subsonic Filter 12dB/Octave @ 14–280Hz
Weights & Dimensions
19”L x 5.25”H x 8”D
Dimensions (483mm x 133mm x 203mm)
Unit Weight 12.7lbs (5.8kg)
Shipping Weight 16lbs (8kg)
Power Requirements
Nominal Voltage 100–240VAC (50–60Hz)
Minimal Voltage 85VAC, 30W

©2014 All features, specifications and graphical representations are subject to change without notice. DS-0714
 Ashly Audio, Inc. | 847 Holt Road | Webster, NY 14580-9103 USA | US toll free: +1-800-828-6308 | tel: +1-585-872-0010 | fax: +1-585-872-0739 | [email protected] | www.ashly.com | Ashly is a division of Jam Industries, Ltd.

GQX−3102 Architect & Engineering Specs

The graphic equalizer shall be stereo (2 channels). Each channel shall consist of 31 bands centered on standard ISO frequencies at intervals of 1/3 octave and covering a frequency range of 20Hz to 20kHz. Individual
bands shall be activated by linear slide faders with a 45mm travel, metal actuator shafts and a tactile center detent. The range of equalization per band shall be either ±6dB or ±15dB selected via a 2-position switch.
The equalizer shall have a gain of unity with all sliders centered, and shall have a maximum in/out level of +23dBu. Frequency response shall be ±.25dB 20Hz to20kHz. Hum and noise shall be less than -95dBu and
SMPTE intermodulation distortion or THD shall be less than .01% at full output. Input impedance shall be 20k ohm balanced, 10k ohm unbalanced. Output impedance shall be 200 ohm servo-balanced. Inputs and
outputs shall be active (transformerless) balanced type on XLR, 1/4” phone jacks, and Euroblock connectors. Individual filters shall be Wein-bridge type and connected in a summing circuit optimized for minimum
filter interaction and constant bandwidth at any slider setting. Boost and cut characteristics shall be fully symmetrical, with the filter being electrically removed from the circuit in the center (flat) position. Individual
filters shall be accurate to within 3% of indicated center frequency and shall be non-adjustable to insure long term accuracy. The equalizer shall also include an 18dB per octave high pass filter tunable from 14Hz to
280Hz, equipped with a bypass switch. A 10-position, 2-color LED level meter shall be employed to show overall output level and LED indicators shall show overload conditions. Input gain shall be adjustable from
-infinity to +6dB, and an overall EQ bypass switch shall be included. The equalizer shall weigh 13lbs net and mount in a standard 19” rack using 3 spaces (5.25” high). The power requirement shall be 100-240VAC,
50-60Hz, 24W.

The unit shall be an Ashly Audio GQX-3102.