Scribd Logo
Upload

Welcome to Scribd!

  • 209 views

    TDC 004 CS Fittings r0

    Uploaded by

    samkarthik47
    This document provides the technical delivery conditions for carbon steel pipe fittings to be used on the NASR FFD project. It specifies that the material will be carbon steel fittings conforming to ASME B16.9 and SA-234M Gr WPB standards. Testing will include product analysis, hardness testing, and magnetic particle and liquid penetrant examinations. The carbon content must not exceed 0.23% and the carbon equivalent must not exceed 0.43%. Material certification will be provided in accordance with EN 10204-3.1 or 3.2 standards. Dimensional tolerances must meet ASME B16.9 specifications.

    Copyright:

    © All Rights Reserved
    Download as DOC, PDF, TXT or read online from Scribd

    TDC 004 CS Fittings r0

    Uploaded by

    samkarthik47
    209 views1 page
    This document provides the technical delivery conditions for carbon steel pipe fittings to be used on the NASR FFD project. It specifies that the material will be carbon steel fittings conforming to ASME B16.9 and SA-234M Gr WPB standards. Testing will include product analysis, hardness testing, and magnetic particle and liquid penetrant examinations. The carbon content must not exceed 0.23% and the carbon equivalent must not exceed 0.43%. Material certification will be provided in accordance with EN 10204-3.1 or 3.2 standards. Dimensional tolerances must meet ASME B16.9 specifications.

    Original Description:

    TDC CS fittings

    Copyright

    © © All Rights Reserved

    Available Formats

    DOC, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides the technical delivery conditions for carbon steel pipe fittings to be used on the NASR FFD project. It specifies that the material will be carbon steel fittings conforming to ASME B16.9 and SA-234M Gr WPB standards. Testing will include product analysis, hardness testing, and magnetic particle and liquid penetrant examinations. The carbon content must not exceed 0.23% and the carbon equivalent must not exceed 0.43%. Material certification will be provided in accordance with EN 10204-3.1 or 3.2 standards. Dimensional tolerances must meet ASME B16.9 specifications.

    Copyright:

    © All Rights Reserved
    Download as DOC, PDF, TXT or read online from Scribd
    Download as doc, pdf, or txt
    209 views1 page

    TDC 004 CS Fittings r0

    Uploaded by

    samkarthik47
    This document provides the technical delivery conditions for carbon steel pipe fittings to be used on the NASR FFD project. It specifies that the material will be carbon steel fittings conforming to ASME B16.9 and SA-234M Gr WPB standards. Testing will include product analysis, hardness testing, and magnetic particle and liquid penetrant examinations. The carbon content must not exceed 0.23% and the carbon equivalent must not exceed 0.43%. Material certification will be provided in accordance with EN 10204-3.1 or 3.2 standards. Dimensional tolerances must meet ASME B16.9 specifications.

    Copyright:

    © All Rights Reserved
    Download as DOC, PDF, TXT or read online from Scribd
    Download as doc, pdf, or txt
    of 1

    CONSOLIDATED CONTRACTORS GROUP

    S.A.L
    TECHNICAL DELIVERY CONDITION (PIPE FITTINGS-CS)
    TDC No: 004 Rev No : 0 Date : 27/07/2017 Page 1 of 1

    JOB No E14009 - NASR FFD PROJECT


    MFGR’S SR NO / ITEM DESCRIPTION CARBON STEEL STANDARD FITTINGS

    CARBON STEEL STANDARD FITTINGS-ELBOWS-45°/90°,


    1 Description Of Material : ECC. REDUCER/CONC. REDUCER, EQUAL TEE, RED. TEE
    & CAPS
    2 Code / Standard : ASME SECTION II Part A ED2015
    3 Material Specification SA-234M Gr WPB, ED2015
    4 Product Standard ASME B16.9 ,Year 2001
    5 Acceptable ASTM Designation None
    6 Quantity As per Material Requisition
    7 Size / Dimensions/Pressure Class As per Material Requisition
    Required Not Required
    8 Impact Test
    N.A
    9 Weld Repair Permitted Not Permitted
    As per Specification & Product Standard
    10 Markings / Identification
    Additional Markings as specified below
    11 Material Test Report As per Specification
    12 Supplementary Requirements :

    S2: Product Analysis.


    S3: Hardness.
    S5 : Magnetic Particle Examination
    S6: Liquid Penetrant Examination.
    S11 : Carbon equivalent

    13 Additional Requirements:

    Carbon content Maximum 0.23% & Carbon Equivalent Maximum 0.43%.


    NACE MR-0175,2003
    Fine Grain steel as defined in Para 8 of SA-20M. If aluminum is used as grain refiner it should be
    reported in the Material Test Report
    Material Test Certificate required as per EN 10204-3.1 EN 10204-3.2
    Others

    14
    Notes:
    1. Product Marking : As per clause 4 of ASME B16.9 & Clause 18 of SA 234M Gr WPB
    2. Dimensional Tolerances: As per ASME B16.9 Ed 2001

    PREPARED BY
    APPROVED BY
    Mehtab Shaikh
    Ahmed Youssef

    Design Engineer Project Engineer

    You might also like