Design of Slab As Per IS:456-2000: Input Data

Download as pdf or txt
Download as pdf or txt
You are on page 1of 6

Sheet1

Design of Slab as per IS:456-2000:

Input Data:

Material :
Concrete Grade M 20
Reinforcement Steel Grade Fe 500

Dimensions:
Short Span : Lx: 4.13 m
Long Span : Ly: 4.63 m

Effective Cover: 20 mm (Cover should comply clause 26.4


of IS:456)
Boundary Condition: 4 * For Two way slab,refer the sketch
on the right side.Dark line shows
the continuity.
* For one way continuous slab,
5 for Intermediate Panel,7 for end Panel,
* For one way discontinuous slab, 9.
* For cantilever slab, 10.

Load : 1 2
Floor Finish Load wf: 1 kN/m2
Live Load wL: 2 kN/m2
Load Factor for BM: 1.5 3 4
Load Factor for SF: 1.5
Calculations:
Aspect ratio=Ly/Lx= 1.1210654
Slab designed as: Two Way Slab 5 6

Bending Moment Coefficients:


ax support = 0.0545 For short span support moment. 7 8
ax span = 0.0411 For short span span moment.
ay support = 0.047 For Long span support moment.
ay span = 0.035 For Long span span moment. 9

Depth assumed D = 125 mm OK


2
Selfweight wself =25xD/1000= 3.125 kN/m ( Density of concrete assumed 25 kN/m3)
2
Load intensity = w = wself+wf+wL= 6.125 kN/m
Effective depth d= D - Eff. Cover= 105 mm
Factored Bending Moments=Factor x w x Coefficient x Lx 2

Mu/bd2 pt req Ast req


% mm2/ m Explanation:
2 6 2
Mux support= 8.537 kN m 0.774 0.187 196.16 Mu/bd =Mux10 /(1000xd )
Mux span= 6.433 kN m 0.584 0.139 146.00 pt req is from charts of SP-16.
Muy support= 7.365 kN m 0.668 0.160 168.06 Ast= ptx1000xd/100
Muy span= 5.485 kN m 0.497 0.118 123.79

Page 1
Sheet1

2
Minimum Ast req=0.12xD/1000= 150 mm per meter

Reinforcement Provided:
Short Span Support: 8 Dia at 150 c/c Ast= 334.9 OK
Short Span Span: 8 Dia at 150 c/c Ast= 334.9 OK
Long Span Support: 8 Dia at 150 c/c Ast= 334.9 OK
Long Span Span: 8 Dia at 150 c/c Ast= 334.9 OK

Check for Deflection:


Basic L/d = 26 (Clause 23.2.1 of IS 456-2000)
Modification factor= 2 ( Figure 4 of IS 456-2000)
d req as per deflection control=Lx/(Basic L/d x Modification factor )= 79.42 mm
d required < d provided so, OK

Check for Shear:


Shear Force Vu= Factor x w x Lx/2= 18.972188 kN
Nominal Shear Stress=Vu/bd= 0.181 N/mm2
%reinforcement= 0.319 %
Beta= 7.279
tc= 0.398 N/mm2
k= 1.3 As per Clause 40.2.1.1 IS:456:2000
kxtc= 0.518 N/mm2 so, OK

Page 2
Sheet1

Page 3
Sheet1

Explanation:
ux106/(1000xd2)
m charts of SP-16.

Page 4
Sheet1

Page 5
Sheet1

Page 6

You might also like