VHP5904LT

Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

GE Power & Water

Waukesha* gas engines


VHP Series Four * * Image is representative of engine model

Enginator* generating system


VHP5904LT
860 - 1025 kW

GE’s Waukesha VHP generator sets are built for efficiency, Reliable 12 cylinder VHP generator sets, rated at 500-1100
durability and longevity providing reliable power for kWe at 50 Hz (1000 rpm) continuous duty to 1200 kWe at
continuous and intermittent power applications. 60 Hz (1200 rpm) intermittent duty, are ideal for remote
sites.

technical data
Waukesha engine L5794LT, four cycle, overhead valve Dimensions l x w x h inch (mm)
Cylinders V12 Heat exchanger 235 (5970) x 85 (2160) x 103 (2620)
Piston displacement 5788 cu. in. (95 L) Water connection 205 (5208) x 85 (2160) x 103 (2620)
Radiator 260 (6600) x 124 (3150) x 160 (4060)
Compression ratio 10.2:1
Bore & stroke 8.5” x 8.5” (216 mm x 216 mm) Weights lb (kg)
Jacket water system capacity 107 gal. (405 L) Heat exchanger 40000 (18140)
Lube oil capacity 190 gal. (719 L) Water connection 38000 (17230)
Starting system 24V electric Radiator 46,000 (20860)

*Trademark of General Electric Company


performance data
Continuous Power
60 Hz 50 Hz
Intercooler Water Temperature 130°F (54°C)
1200 RPM 1000 RPM
Power kW (heat exchanger/water connection cooling) 1025 900
Power kW (radiator cooling) 990 860
BSFC (LHV) Btu/bhp-hr (kJ/kWh) 7535 (10658) 7203 (10191)
Fuel Consumption Btu/hr x 1000 (kW) 10926 (3202) 9148 (2681)
NOx g/bhp-hr (mg/Nm3 @ 5% O2) 1.90 (762) 3.30 (1351)
Emissions

CO g/bhp-hr (mg/Nm @ 5% O2)


3
1.80 (730) 1.70 (684)
NMHC g/bhp-hr (mg/Nm3 @ 5% 02) 0.34 (140) 0.32 (128)
THC g/bhp-hr (mg/Nm3 @ 5% O2) 2.30 (931) 2.10 (853)
Heat to Jacket Water Btu/hr x 1000 (kW) 2696 (790) 2254 (661)
Heat to Lube Oil Btu/hr x 1000 (kW) 472 (138) 375 (110)
Balance
Heat

Heat to Intercooler Btu/hr x 1000 (kW) 518 (152) 362 (106)


Heat to Radiation Btu/hr x 1000 (kW) 451 (132) 437 (128)
Total Exhaust Heat Btu/hr x 1000 (kW) 3311 (970) 2665 (781)
Induction Air Flow scfm (Nm /hr)
3
3169 (4771) 2583 (3890)
Intake/Exhaust

Exhaust Flow lb/hr (kg/hr) 14229 (6453) 11600 (5262)


System

Exhaust Temperature °F (°C) 895 (479) 884 (473)


Radiator Air Flow scfm (m3/min) (radiator cooling) 100000 (2832) 85000 (2407)

Rating Standard: The Waukesha Enginator ratings are based on ISO 3046/1-1995 with an engine mechanical efficiency of 90% and auxiliary water temperature Tcra as
specified limited to ±10°F (±5°C). Ratings also valid for ISO 8528 and DIN 6271, BS 5514 standard atmospheric conditions.
Continuous Power Rating: The highest electrical power output of the Enginator available for an unlimited number of hours per year, less maintenance. It is permissable to
operate the Enginator with up to 10% overload for two hours in each 24 hour period.
All data according to full load and subject to technical development and modification.
Consult your local GE Power & Water’s representative for system application assistance. The manufacturer reserves the right to change or modify without notice, the design
or equipment specifications as herein set forth without incurring any obligation either with respect to equipment previously sold or in the process of construction except
where otherwise specifically guaranteed by the manufacturer.

GE Power & Water Visit us online at:


1101 West Saint Paul Ave. www.ge-waukesha.com
Waukesha, WI 53188-4999
P: 1.262.547.3311 ©2013 General Electric Company
F: 1.262.549.2759 All Rights Reserved

7017 0513 GEA-18920

You might also like