Scribd Logo
Upload

Welcome to Scribd!

  • 1K views

    Retarder - Oil Change - pdf2

    Uploaded by

    Hariyanto oknes
    Retarder

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Retarder - Oil Change - pdf2

    Uploaded by

    Hariyanto oknes
    1K views3 pages
    Retarder

    Original Title

    Retarder - Oil Change.pdf2

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Retarder

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    1K views3 pages

    Retarder - Oil Change - pdf2

    Uploaded by

    Hariyanto oknes
    Retarder

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 3

    AP43.30-W-4301B Retarder - oil change 14.1.

    08
    MODEL 375.4 with CODE (BA1) Performance-optimized Voith retarder
    MODEL 930, 932, 933, 934 with CODE (BA1) Performance-optimized Voith retarder
    MODEL 940, 942, 943, 944 with CODE (BA1) Performance-optimized Voith retarder
    MODEL 950.5 /6, 952.5 /6, 953.6, 954.5 with CODE (BA1) Performance-optimized Voith retarder
    MODEL 958.2 /4 with CODE (BA1) Performance-optimized Voith retarder

    1 Oil drain screw


    2 Screw plug
    3 Oil filler plug
    4 Adapter
    5 Tire filler

    N43.30-2045-06

    Danger! Risk of injurycaused by touching hot Do not carry out any work unless retarder is AS43.30-Z-0001-01A
    retarder and by scalding from hot retarder switched off. Wear suitable protective
    oil. clothing when working on hot retarder.
    Risk of injuryto skin or eyes due to
    retarder oil spraying out under high
    pressure.
    Carry out oil change when the vehicle is
    horizontal and at a retarder oil temperature >
    60 °C
    1 Set engine control/permanent brake
    operating lever to "0" position and switch-off
    ignition
    2 Clean area surrounding oil drain screw (1),
    the screw plug (2) and oil filler screw (3)
    3 Unscrew oil drain screw (1) Collect drained oil in a clean container.
    4 Remove screw plug (2) carefully
    Checking
    5 Screw in adapter (4) with new sealing ring *BA43.30-N-1011-01E
    *715589176300
    6 Connect tire filler (5) to adapter (4) *715589176300
    7 Give brief air pulses to the retarder with the Repeat the process until only an oil mist
    tire filler (5) escapes at the oil drain screw (1).
    Measure volume of drained oil and
    determine oil quantity.
    The oil quantity drained must be 5.4 to 5.6 l
    If this is not the case, proceed as follows:
    If the oil quantity is too small the
    transmission oil level and retarder must be
    checked for any leakage (outwards) or the
    seal between the transmission and retarder
    must be checked.
    If the oil quantity is larger the transmission
    oil level and the seal between the
    transmission and retarder must be checked.
    8 Detach tire filler (5) and adapter (4)
    9 Remove oil filler screw (3)
    10 Screw in oil drain screw (1) Replace sealing ring.
    © Daimler AG, 7/9/09, G/06/09 / ap43.30-w-4301b / Retarder - oil change Page 1/3
    MODEL 375.4 with CODE (BA1) Performance-optimized Voith retarder MODEL 930, 932, 933, 934 with CODE (BA1) Performance-optimized Voith retarder MODEL 940, 942, 943, 944 with CODE ...
    *BA43.30-N-1014-01E
    11 Screw in screw plug (2) Replace sealing ring.
    *BA43.30-N-1010-01E
    12 Slowly pour in specified quantity To bleed the retarder system correctly
    the oil should be poured in slowly over a
    period of > 3 minutes.
    *BF43.30-N-1001-01C
    *112589007200
    13 Screw in oil filler plug (3) Replace sealing ring.
    *BA43.30-N-1005-01E

    Retarder

    Number Designation Models


    374, 375, 930,
    932, 933, 934,
    940, 942, 943,
    944, 950, 952,
    953, 954, 958
    with Code BA1

    BA43.30-N-1005-01E Oil filler screw to retarder housing Nm 100

    BA43.30-N-1010-01E Screw plug, pump pressure measuring point to Nm 30


    retarder housing

    BA43.30-N-1011-01E Adapter for oil change to retarder housing Nm 30

    BA43.30-N-1014-01E Retarder oil drain screw to heat exchanger Nm 25

    Retarder

    Number Designation Model


    374, 375, 930,
    932, 933, 934,
    940, 942, 943,
    944, 950, 952,
    953, 954, 958
    with Code BA1

    BF43.30-N-1001-01C Single-grade Filling capacity, service Liters 5.6


    engine oil
    SAE 10W
    SAE 20W20
    SAE 30

    Filling capacity after changing Liters 7.0


    heat exchanger or in
    reconditioned assembly

    Specifications for Operating Sheet BB00.40-P-0235-27A


    Fluids

    © Daimler AG, 7/9/09, G/06/09 / ap43.30-w-4301b / Retarder - oil change Page 2/3
    MODEL 375.4 with CODE (BA1) Performance-optimized Voith retarder MODEL 930, 932, 933, 934 with CODE (BA1) Performance-optimized Voith retarder MODEL 940, 942, 943, 944 with CODE ...
    112 589 00 72 00 715 589 17 63 00
    Hand pump Adapter

    © Daimler AG, 7/9/09, G/06/09 / ap43.30-w-4301b / Retarder - oil change Page 3/3
    MODEL 375.4 with CODE (BA1) Performance-optimized Voith retarder MODEL 930, 932, 933, 934 with CODE (BA1) Performance-optimized Voith retarder MODEL 940, 942, 943, 944 with CODE ...

    You might also like