In the age of Google maps, GPS and AIS, there is

something in the wheelhouse that looks so outdated.

I am talking about sextant and getting the position of

the ship by sextant.

Now before you yawn and find some more sexy

navigation topic to jam on, hear me out.

Sextant has something unique that all the advanced

technologies cannot match.

It can give you your accurate position without relying on

any electronic aid or satellite.

That is the reason sextant has been there and as far as

we can tell, it always will be.

But there is also a drawback. To get a position from the

sextant requires some calculations and expertise in

handling the sextant.

Also, the position is not instant read out like in modern

equipments.
But more you use the sextant, more these drawbacks

are marginalized.

Now you may know all the calculations of the sextant.

You may know about long by chron, Mer-pass and all

other calculations to get the ship’s position.

But if you don’t know how the hell an equipment like

sextant can get us our position, you are missing

everything.

And anyone who wants to learn just that, they need to

start with something very basic. Position lines.

Position Lines

I am going to assume that you know nothing about

“position lines”.

That is totally OK. I will spell it out for you.

A position line is a line on which lies a point where ship’s

position will be.

Let us say you take a bearing of a lighthouse and the

bearing is 310 Degrees. Now draw a line with bearing

310 meeting the island. In other words, draw a line in a

direction of 130 degrees from the lighthouse.

This line is a position line as your position ought to be

somewhere on this line.

But you see, if I randomly choose 5 points on this line,

one of which is your position, Can you tell be which one

is your position?

No, right?
For this reason, we need two position lines separated by

some angle to know our position. The point where two

position lines would intersect will be your position.

So in our case, let us say we take the bearing of

another lighthouse and it is 240 Degrees. We draw this

position line.

The position where these two positions line would

intersect is your position.

On board ships, whichever way you get the ship’s

position, it always involves at least two position lines.

 GPS gives us two position lines separated by 90

degrees angle. These position lines are

 Latitude

 Longitude

Position by celestial observations

The principles of plotting position by celestial

observations is no different than usual terrestrial

observations.

In celestial observations too, we need at least two

position lines to get the ship’s position.

But to get a celestial position lines is not as simple as

getting terrestrial position lines.

Now why I say it is different ?

When we take a bearing of an object (like a lighthouse),

we have the lighthouse on the chart. We just plot the

position line or position circle from that object.

 But if we get the distance or bearing of the celestial

object (like sun), we have two issues

 We do not have that celestial object on our chart from

where we can just draw the position line, and

 The object is too far away

So what do we do? We have to do two things

 We have to shift our position to space (Zenith) so that

we can measure our distance from the celestial object

(Zenith distance).

 We have to bring the celestial object (for example sun)

to the earth (Geographical position of the object) so

that we can plot the measured distance on the earth’s

surface.

Don’t worry. We don’t need to rent a rocket to go to

space to measure that distance.

But I mentioned here few words.

 Zenith

 Zenith Distance

 Geographical position of the object

Let us see what are these.

Zenith

Zenith is the point on the celestial sphere directly above

the observer. That is, it is the point that meets the

celestial sphere when a line is drawn from the center of

the earth through the observer.

Zenith Distance

In simple words, zenith distance is the distance between

Zenith and center of the celestial body.

Geographical position of the celestial body

The geographical position of the celestial object is the

position on earth’s surface that is obtained by joining a

line from that object to the center of the earth.

 The geographical position of any celestial object is given

in term of GHA and Declination.

If we have to compare this with Latitude and longitude

then

 Declination is the latitude of the celestial body and

 GHA is the longitude of the celestial body

To understand these terms, let us take the earth

surrounded by the celestial sphere.

The celestial sphere is the imaginary sphere of infinite

radius with its center at the center of the earth.

Let us say our position is at O.

Now join the center of the earth to our position and

extend it to meet the celestial sphere. The point where

it meets the celestial sphere is our (observer’s) zenith.

We denote it by Letter “Z”.

Now let us assume the celestial body (we will take the

example of Sun) is at position “X”

The distance of arc ZX is the zenith distance. It is

measured as the angle at the center of the earth.

For example if the zenith distance was 40 Degrees, on

the surface of the earth this would mean a distance of

2400 miles. One degree at the center

of earth approximately equals to 60 Miles.

If we need to draw this position circle, we need to draw

this from the geographical position of the celestial body.

So if we draw a circle of 2400 Miles (40 deg x 60 miles),

from sun’s geographical position, our position will be

somewhere on that circle.

Ideally, we would have got the position circle with this

distance. Zenith distance should be all that we need to

get one position line.

If we compare it to the terrestrial position lines, zenith

distance can be compared to the range.

But only problem is it would be difficult to draw this big

position circle on the chart.

Not only that. This big position circle would cover half

the world. So it would be like saying that the ship’s

position is anywhere on this earth.

So even though we have one position circle, it is of no

use to us as this cannot be plotted.

Then how do we make use of it to get ship’s position?

Well, first we can shorten this position circle and

concentrate only on that portion of it which is near to

our DR position.
This part of the position circle can considered to be a

straight line and thus a position line.

This is because for a circle of as large radius as

hundreds of miles, a small arc will look like a straight

line.

The direction of this straight line near the DR position of

the ship can be taken as the direction of the Position

line.

But to get the direction of this Position line, we still need

to draw the arc of 2400 miles and measure the angle of

the position line. Isn’t it? Which we earlier agreed is

difficult.

We can find the direction of the position line in a

different way.

We know that tangent to a circle is at 90 degrees to the

radius of the circle.

So if we take the azimuth of the celestial body, it will

pass through the radius of this position circle. And the a

line 90 degrees to the azimuth will be the position line

we need.
So we calculate the azimuth of the celestial body and

our position line will be 90 degrees from the azimuth.

Let us say, we calculate the azimuth of the sun and

found it to be 060 Degrees. The position line will be 150

deg – 330 Deg.

Now there are two questions that should be troubling

our mind.

We said that we will have

 Distance from our position to the geographical position

of the celestial body, and

 Azimuth of the celestial body

If we compare this with terrestrial objects, this is kind of

saying that we have range and bearing of a lighthouse.

If this is so then,

Wouldn’t the intersection of azimuth and

zenith distance of the celestial body be
the ship’s position?

Well, actually the answer is that it certainly should be

the ship’s position. But provided all the data is correct.

If there is slightest of the difference between the actual

azimuth and the azimuth we calculate, the position will

be offset by miles.
For example with the 1-degree error in azimuth for

position circle of 2400 miles, the position will be offset

by approx 40 miles. I leave the math up to you.

There is another reason for this.

For calculating the azimuth of the celestial body, we

have used the observed position of the ship. This is not

our actual position (which of course we intend to

calculate with all this exercise).

Which means that the azimuth is for observed position

and not at the ship’s actual position.

Where does sextant fit in all this?

If we need to get our basics of sight calculation right,

there is one final question we must answer.

Where does sextant fit in all this?

As I explained little while earlier that to get a

celestial position line, we need two values

 Zenith distance of the celestial body

 Azimuth of the celestial body

Getting the azimuth of the celestial body is a simple

calculation. We calculate the azimuth with A,B,C tables

(or by solving PZX triangle) all the time for compass

error calculations.

But how can we get the

zenith distance of the celestial body ?

Well, there is a relation between zenith distance and the

altitude of the celestial body.

The sum of altitude and zenith distance is always 90

degrees.
So if we know the altitude of the celestial body, we

would know the zenith distance.

The sextant measures the altitude and that is where it

fits in the sight calculation process.

There are few corrections that need to be applied to the

altitude measured with the sextant to get the true

altitude of the body.

So in all the sight calculations, all we are aiming for is

 To get a position line which we can calculate by

calculating the azimuth of the celestial body

 To get the position from where we need to draw this

position line. This we get by calculating the zenith

distance of the celestial body

Conclusion

To fix the position of ship by celestial sight requires two

things

 A position line

 A position through which to draw the position line

We get the position line by calculating the azimuth of

the celestial body. The position line is 90 degrees from

the azimuth.

We also need the position from which to draw this

position line. This is calculated by using the Zenith

distance of the body, which we can get from the altitude

of the body.

The intersection of two such position lines brought to

same time will give the ship’s position.

Whole this process of may look boring but more you

practice it, more interesting it becomes.

And when you have mastered the art of fixing ship’s

position by sextant, you can proudly own this quote.

All I need a ship and a star to steer her by.