Data sheet 3RW40 24-1BB04

SIRIUS soft starter S0 12.5 A, 5.5 kW/400 V, 40 °C 200-

480 V AC, 24 V AC/DC Screw terminals

General technical data

product brandname SIRIUS
● Product equipment Integrated bypass contact Yes
system
● Product feature Thyristors Yes
Product function
● Intrinsic device protection Yes
● motor overload protection Yes
● Evaluation of thermistor motor protection No
● External reset Yes
● Adjustable current limitation Yes
● Inside-delta circuit No
Product component Motor brake output No
Equipment marking acc. to DIN EN 61346-2 Q
Equipment marking acc. to DIN 40719 extended G
according to IEC 204-2 acc. to IEC 750

Power Electronics
Product designation Soft starter

3RW40 24-1BB04 Subject to change without notice

Page 1/6 12/24/2017 © Copyright Siemens
 Operating current
● at 40 °C rated value A 12.5
● at 50 °C rated value A 11
● at 60 °C rated value A 10
Mechanical power output for three-phase motors
● at 230 V
— at standard circuit at 40 °C rated value W 3 000
● at 400 V
— at standard circuit at 40 °C rated value W 5 500
Yielded mechanical performance [hp] for three-phase hp 3
AC motor at 200/208 V at standard circuit at 50 °C
rated value
Operating frequency rated value Hz 50 ... 60
Relative negative tolerance of the operating % -10
frequency
Relative positive tolerance of the operating frequency % 10
Operating voltage at standard circuit rated value V 200 ... 480
Relative negative tolerance of the operating voltage % -15
at standard circuit
Relative positive tolerance of the operating voltage at % 10
standard circuit
Minimum load [% of IM] % 20
Adjustable motor current for motor overload A 5
protection minimum rated value
Continuous operating current [% of Ie] at 40 °C % 115
Power loss [W] at operating current at 40 °C during W 2
operation typical

Control electronics
Type of voltage of the control supply voltage AC/DC
Control supply voltage frequency 1 rated value Hz 50
Control supply voltage frequency 2 rated value Hz 60
Relative negative tolerance of the control supply % -10
voltage frequency
Relative positive tolerance of the control supply % 10
voltage frequency
Control supply voltage 1 at AC
● at 50 Hz rated value V 24
● at 60 Hz rated value V 24
Relative negative tolerance of the control supply % -20
voltage at AC at 60 Hz
Relative positive tolerance of the control supply % 20
voltage at AC at 60 Hz
Control supply voltage 1 at DC rated value V 24

3RW40 24-1BB04 Subject to change without notice

Page 2/6 12/24/2017 © Copyright Siemens
 Relative negative tolerance of the control supply % -20
voltage at DC
Relative positive tolerance of the control supply % 20
voltage at DC
Display version for fault signal red

Mechanical data
Size of engine control device S0
Width mm 45
Height mm 125
Depth mm 155
Mounting type screw and snap-on mounting
Mounting position With additional fan: With vertical mounting surface +/-
90° rotatable, with vertical mounting surface +/- 22.5°
tiltable to the front and back Without additional fan:
With vertical mounting surface +/-10° rotatable, with
vertical mounting surface +/- 10° t
Required spacing with side-by-side mounting
● upwards mm 60
● at the side mm 15
● downwards mm 40
Wire length maximum m 300
Number of poles for main current circuit 3

Connections/Terminals
Type of electrical connection
● for main current circuit screw-type terminals
● for auxiliary and control current circuit screw-type terminals
Number of NC contacts for auxiliary contacts 0
Number of NO contacts for auxiliary contacts 2
Number of CO contacts for auxiliary contacts 1
Type of connectable conductor cross-sections for
main contacts for box terminal using the front
clamping point
● solid 2x (1 ... 2.5 mm²), 2x (2.5 ... 6 mm²), max. 1x 10 mm²
● finely stranded with core end processing 2x (1 ... 2.5 mm²), 2x (2.5 ... 6 mm²)
Type of connectable conductor cross-sections at
AWG conductors for main contacts for box terminal
● using the front clamping point 1x 8, 2x (16 ... 10)
Type of connectable conductor cross-sections for
auxiliary contacts
● solid 2x (0.5 ... 2.5 mm²)
● finely stranded with core end processing 2x (0.5 ... 1.5 mm²)
Type of connectable conductor cross-sections at
AWG conductors
● for auxiliary contacts 2x (20 ... 14)

3RW40 24-1BB04 Subject to change without notice

Page 3/6 12/24/2017 © Copyright Siemens
 ● for auxiliary contacts finely stranded with core 2x (20 ... 16)
end processing

Ambient conditions
Installation altitude at height above sea level m 5 000
Environmental category
● during transport acc. to IEC 60721 3K6 (no formation of ice, no condensation), 3C3 (no
salt mist), 3S2 (sand must not get into the devices),
3M6
● during storage acc. to IEC 60721 3K6 (no formation of ice, no condensation), 3C3 (no
salt mist), 3S2 (sand must not get into the devices),
3M6
● during operation acc. to IEC 60721 3K6 (no formation of ice, no condensation), 3C3 (no
salt mist), 3S2 (sand must not get into the devices),
3M6
Ambient temperature
● during operation °C -25 ... +60
● during storage °C -40 ... +80
Derating temperature °C 40
Protection class IP IP20

Certificates/approvals
General Product Approval EMC For use in Declaration of
hazardous Conformity
locations

Test Certificates Shipping Approval other

Type Test Special Test Confirmation
Certificates/Test Certificate
Report

UL/CSA ratings
Yielded mechanical performance [hp] for three-phase
AC motor
● at 220/230 V
— at standard circuit at 50 °C rated value hp 3
● at 460/480 V
— at standard circuit at 50 °C rated value hp 7.5
Contact rating of auxiliary contacts according to UL B300 / R300

3RW40 24-1BB04 Subject to change without notice

Page 4/6 12/24/2017 © Copyright Siemens
 Further information
Simulation Tool for Soft Starters (STS)
https://support.industry.siemens.com/cs/ww/en/view/101494917
Information- and Downloadcenter (Catalogs, Brochures,…)
http://www.siemens.com/industrial-controls/catalogs
Industry Mall (Online ordering system)
https://mall.industry.siemens.com/mall/en/en/Catalog/product?mlfb=3RW4024-1BB04
Cax online generator
http://support.automation.siemens.com/WW/CAXorder/default.aspx?lang=en&mlfb=3RW4024-1BB04
Service&Support (Manuals, Certificates, Characteristics, FAQs,...)
https://support.industry.siemens.com/cs/ww/en/ps/3RW4024-1BB04
Image database (product images, 2D dimension drawings, 3D models, device circuit diagrams, EPLAN macros, ...)
http://www.automation.siemens.com/bilddb/cax_de.aspx?mlfb=3RW4024-1BB04&lang=en
45

125

85

145.9

148

35.6

5.1
5
115.1

3RW40 24-1BB04 Subject to change without notice

Page 5/6 12/24/2017 © Copyright Siemens
 -Q1 1/L1 3/L2 5/L3 A1 1 14/24 95
IN

OVERLOAD/FAILURE
BYPASSED
ON/RUN

2/T1 4/T2 6/T3 A2 13 23 96 98

last modified: 12/23/2017

3RW40 24-1BB04 Subject to change without notice

Page 6/6 12/24/2017 © Copyright Siemens