Scribd Logo
Upload

Welcome to Scribd!

  • 202 views

    Gpcdoc Tds Darina R 2

    Uploaded by

    nutchai2538
    Shell Darina Grease R 2 is an inorganic non-soap thickened grease suitable for bearings operating in the temperature range of -10°C to 180°C. It provides satisfactory lubrication beyond the limitations of lithium-based greases using a high viscosity mineral oil with excellent oxidation and evaporation resistance. The inorganic clay thickener controls oil vaporization and oxidation stability at high temperatures, helping to extend grease life and maximize working temperature. It is particularly suitable for heavily loaded slow speed bearings and remains in place at high temperatures providing good sealing and lubrication in the presence of vibration.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Gpcdoc Tds Darina R 2

    Uploaded by

    nutchai2538
    202 views2 pages
    Shell Darina Grease R 2 is an inorganic non-soap thickened grease suitable for bearings operating in the temperature range of -10°C to 180°C. It provides satisfactory lubrication beyond the limitations of lithium-based greases using a high viscosity mineral oil with excellent oxidation and evaporation resistance. The inorganic clay thickener controls oil vaporization and oxidation stability at high temperatures, helping to extend grease life and maximize working temperature. It is particularly suitable for heavily loaded slow speed bearings and remains in place at high temperatures providing good sealing and lubrication in the presence of vibration.

    Original Description:

    Darina

    Original Title

    Gpcdoc Tds Darina r 2

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Shell Darina Grease R 2 is an inorganic non-soap thickened grease suitable for bearings operating in the temperature range of -10°C to 180°C. It provides satisfactory lubrication beyond the limitations of lithium-based greases using a high viscosity mineral oil with excellent oxidation and evaporation resistance. The inorganic clay thickener controls oil vaporization and oxidation stability at high temperatures, helping to extend grease life and maximize working temperature. It is particularly suitable for heavily loaded slow speed bearings and remains in place at high temperatures providing good sealing and lubrication in the presence of vibration.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    202 views2 pages

    Gpcdoc Tds Darina R 2

    Uploaded by

    nutchai2538
    Shell Darina Grease R 2 is an inorganic non-soap thickened grease suitable for bearings operating in the temperature range of -10°C to 180°C. It provides satisfactory lubrication beyond the limitations of lithium-based greases using a high viscosity mineral oil with excellent oxidation and evaporation resistance. The inorganic clay thickener controls oil vaporization and oxidation stability at high temperatures, helping to extend grease life and maximize working temperature. It is particularly suitable for heavily loaded slow speed bearings and remains in place at high temperatures providing good sealing and lubrication in the presence of vibration.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    Shell Darina Grease R 2

    Shell Darina Grease R 2, based on an inorganic non-soap thickener and a


    specially selected base oil, will provide satisfactory lubrication beyond the
    temperature limitations of lithium based greases.
    The base oil component in Shell Darina Grease R 2 is a high quality, solvent
    refined, high viscosity mineral oil with excellent oxidation and evaporation
    resistance. Oxidation stability is also improved by the addition of a special
    high temperature oxidation inhibitor.
    Variables such as air flow, dirt and humidity
    Applications can have a considerable effect in addition to
    Recommended for use in bearings operating in the more commonly recognised parameters of
    the temperature range -10°C to 180°C. load, speed and temperature.
    Shell Darina Grease R 2 gives good service Predicted life is likely to be reduced
    life in many applications where expensive significantly for less favourable conditions.
    synthetic or silicone lubricants would otherwise
    be considered. Recommendations should be tested on a trial
    basis and modified, where necessary, in the
    The special high viscosity base oil in Shell light of service experience.
    Darina Grease R 2 makes it particularly
    suitable for the grease lubrication of heavily
    Bearing Housing
    loaded slow speed bearings.
    Preferably, bearing housings should be
    With caution, Shell Darina Grease R 2 may be designed to allow for complete purging during
    used at temperatures in excess of 200°C, but Re-lubrication. Alternatively, the bearing
    only so long as the Re-lubrication period is should be dismantled for periodic servicing
    suitably adjusted. and complete replacement of the grease
    charge.

    Operating Temperature Typical Physical Characteristics


    A severe limitation in many high temperature
    greases is the type of organic metallic soap Shell Darina Grease R2
    thickener. It can melt at high temperatures NLGI Consistency 2
    destroying the grease structure - greatly Soap Type Inorganic
    reducing its retention and lubrication (clay)
    properties. The special inorganic clay
    Base Oil (type) Mineral
    thickener contained in Shell Darina Grease R
    2 is free from any melting limitation. It controls Kinematic Viscosity
    @ 40°C cSt 492
    the vaporisation and oxidation stability of the 32
    100°C cSt
    base oil and helps to extend grease life and (IP 71)
    maximise working temperature.
    Cone Penetration
    Worked @ 25°C 0.1 mm 265-295
    (IP 50/ASTM-D217)
    Sealing
    Dropping Point °C 250
    Shell Darina Grease R 2 does not melt like
    (IP 132)
    soap thickened greases and hence its
    consistency changes only marginally with
    increasing temperature. In bearings operating These characteristics are typical of current
    at high temperature it resists softening and production. Whilst future production will
    remains in place providing good sealing and conform to Shell's specification variations in
    continuous lubrication even in the presence of these characteristics may occur.
    vibration.

    Re-lubrication
    Grease life varies considerably from
    application to application even with bearings
    operating under nominally identical conditions.
    Health & Safety
    Shell Darina Grease R 2 is unlikely to present
    any significant health or safety hazard when
    properly used in the recommended application,
    and good standards of industrial and personal
    hygiene are maintained.
    For further guidance on Product Health &
    Safety refer to the appropriate Shell Product
    Safety Data Sheet.

    Advice
    Advice on applications not covered in this
    leaflet may be obtained from your Shell
    Representative

    S001ESPW.00E September 1995

    You might also like