Data Sheet

Cisco 10GBASE SFP+ Modules

A broad range of industry-compliant SFP+ modules for 10 Gigabit Ethernet
deployments in diverse networking environments

Product Overview
The Cisco® 10GBASE SFP+ modules (Figure 1) give you a wide variety of 10 Gigabit Ethernet connectivity options
for data center, enterprise wiring closet, and service provider transport applications.

Figure 1. Cisco 10GBASE SFP+ Modules

Features and Benefits

Cisco SFP+ modules offer the following features and benefits.

● Industry’s smallest 10G form factor for greatest density per chassis
● Hot-swappable input/output device that plugs into an Ethernet SFP+ port of a Cisco switch (no need to
power down if installing or replacing)
● Supports “pay-as-you-populate” model for investment protection and ease of technology migration
● Digital optical monitoring capability for strong diagnostic capabilities
● Optical interoperability with 10GBASE XENPAK, 10GBASE X2, and 10GBASE XFP interfaces on the same
link
● Cisco quality identification (ID) feature enables a Cisco platform to identify whether the module is certified
and tested by Cisco

Cisco SFP-10G-SR-S Module (S-Class)

The Cisco 10GBASE-SR module supports a link length of 26 meters on standard Fiber Distributed Data Interface
(FDDI)-grade multimode fiber (MMF). Using 2000 MHz*km MMF (OM3), up to 300-meter link lengths are possible.
Using 4700 MHz*km MMF (OM4), up to 400 meter link lengths are possible. SFP-10G-SR-S does not support
FCoE.

© 2016 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 1 of 12
 Cisco SFP-10G-SR Module
The Cisco 10GBASE-SR Module supports a link length of 26m on standard Fiber Distributed Data Interface
(FDDI)-grade multimode fiber (MMF). Using 2000MHz*km MMF (OM3), up to 300m link lengths are possible. Using
4700MHz*km MMF (OM4), up to 400m link lengths are possible.

Cisco SFP-10G-SR-X Module

The Cisco SFP-10G-SR-X is a multirate* 10GBASE-SR, 10GBASE-SW and OTU2/OTU2e module for extended
operating temperature range. It supports a link length of 26m on standard Fiber Distributed Data Interface (FDDI)-
grade multimode fiber (MMF). Using 2000MHz*km MMF (OM3), up to 300m link lengths are possible. Using
4700MHz*km MMF (OM4), up to 400m link lengths are possible.
*
Except for version 1, which supports only 10GBASE-SR

Cisco SFP-10G-LRM Module

The Cisco 10GBASE-LRM Module supports link lengths of 220m on standard Fiber Distributed Data Interface
(FDDI) grade multimode fiber (MMF). To make sure that specifications are met over FDDI-grade, OM1 and OM2
fibers, the transmitter should be coupled through a mode conditioning patch cord. No mode conditioning patch cord
is required for applications over OM3 or OM4. For additional information on mode conditioning patch cord
requirements please see: http://www.cisco.com/en/US/prod/collateral/modules/ps5455/product_bulletin_c25-
530836.html.

The Cisco 10GBASE-LRM Module also supports link lengths of 300m on standard single-mode fiber (SMF, G.652).

Cisco SFP-10G-LR-S Module (S-Class)

The Cisco 10GBASE-LR module supports a link length of 10 kilometers on standard single-mode fiber (SMF)
(G.652). SFP-10G-LR-S does not support FCoE.

Cisco SFP-10G-LR Module

The Cisco 10GBASE-LR Module supports a link length of 10 kilometers on standard single-mode fiber
(SMF, G.652).

Cisco SFP-10G-LR-X Module

The Cisco SFP-10G-LR-X is a multirate 10GBASE-LR, 10GBASE-LW, and OTU2/OTU2e module for extended
operating temperature range. It supports a link length of 10 kilometers on standard single-mode fiber
(SMF, G.652).

Cisco SFP-10G-ER-S Module (S-Class)

The Cisco 10GBASE-ER module supports a link length of up to 40 kilometers on SMF (G.652). SFP-10G-ER-S
does not support FCoE.

Cisco SFP-10G-ER Module

The Cisco 10GBASE-ER Module supports a link length of up to 40 kilometers on standard single-mode fiber
(SMF, G.652).

© 2016 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 2 of 12
 Cisco SFP-10G-ZR-S Module (S-Class)
The Cisco 10GBASE-ZR module supports link lengths of up to about 80 kilometers on standard SMF (G.652).
This interface is not specified as part of the 10 Gigabit Ethernet standards and is, instead, built according to
Cisco specifications. SFP-10G-ZR-S does not support FCoE.

Cisco SFP-10G-ZR Module

The Cisco SFP-10G-ZR is a multirate 10GBASE-ZR, 10GBASE-ZW, and OTU2/OTU2e module. It supports link
lengths of up to about 80 kilometers on standard single-mode fiber (SMF, G.652). This interface is not specified as
part of the 10 Gigabit Ethernet standard and is instead built according to Cisco specifications.

Cisco FET-10G Module

The Cisco FET-10G Fabric Extender Transceiver supports link lengths up to 100m on laser-optimized OM3 or OM4
multimode fiber. It is supported on fabric links from a Nexus 2000 to a Cisco parent switch only. Note this product is
not orderable individually. For more information refer to Nexus 2000 datasheet:
http://www.cisco.com/en/US/prod/collateral/switches/ps9441/ps10110/data_sheet_c78-507093.html.

Cisco SFP-10G-BXD-I and SFP-10G-BXU-I for 10Km (Single-Fiber Bidirectional Applications)

The Cisco SFP-10G-BXD-I and SFP-10G-BXU-I SFPs operate on a single strand of standard SMF.

A SFP-10G-BXD-I device is always connected to a SFP-10G-BXU-I device with a single strand of standard SMF
with an operating transmission range up to 10 km.

The communication over a single strand of fiber is achieved by separating the transmission wavelength of the two
devices, as depicted in Figure 2. SFP-10G-BXD-I transmits a 1330-nm channel and receives a 1270-nm signal,
whereas SFP-10G-BXU-I transmits at a 1270-nm wavelength and receives a 1330-nm signal. Note in Figure 2 the
presence of a wavelength-division multiplexing (WDM) splitter integrated into the SFP to split the 1270-nm and
1330-nm light paths.

Figure 2. Bidirectional Transmission of a Single Strand of SMF

The SFP-10G-BXD-I and SFP-10G-BXU-I SFPs also support digital optical monitoring (DOM) functions according
to the industry-standard SFF-8472 multisource agreement (MSA). This feature gives the end user the ability to
monitor real-time parameters of the SFP, such as optical output power, optical input power, temperature, laser bias
current, and transceiver supply voltage.

© 2016 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 3 of 12
 Cisco SFP-10G-BX40D-I and SFP-10G-BX40U-I (for 40Km Single-Fiber Bidirectional
Applications)
The Cisco SFP-10G-BX40D-I and SFP-10G-BX40U-I SFPs operate on a single strand of standard SMF.

A SFP-10G-BX40D-I device is always connected to a SFP-10G-BX40U-I device with a single strand of standard
SMF with an operating transmission range up to 40 km.

The communication over a single strand of fiber is achieved by separating the transmission wavelength of the two
devices. SFP-10G-BX40D-I transmits a 1330-nm channel and receives a 1270-nm signal. The SFP-10G-BX40U-I
transmits at a 1270-nm wavelength and receives a 1330-nm signal.

The SFP-10G-BX40D-I and SFP-10G-BX40U-I SFPs support digital optical monitoring (DOM) functions according
to the industry-standard SFF-8472 multisource agreement (MSA). This feature gives the end user the ability to
monitor real-time parameters of the SFP, such as optical output power, optical input power, temperature, laser bias
current, and transceiver supply voltage.

Cisco SFP+ Twinax Copper Cables

Cisco SFP+ Copper Twinax (Figure 3) direct-attach cables are suitable for very short distances and offer a cost-
effective way to connect within racks and across adjacent racks. Cisco offers passive Twinax cables in lengths of
1, 1.5, 2, 2.5, 3 and 5 meters, and active Twinax cables in lengths of 7 and 10 meters.

Figure 3. Cisco Direct-Attach Twinax Copper Cable Assembly with SFP+ Connectors

Cisco SFP+ Active Optical Cables

Cisco SFP+ Active Optical Cables (Figure 4) are direct-attach fiber assemblies with SFP+ connectors. They are
suitable for very short distances and offer a cost-effective way to connect within racks and across adjacent racks.
Cisco offers Active Optical Cables in lengths of 1, 2, 3, 5, 7, and 10 meters.

© 2016 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 4 of 12
 Figure 4. Cisco Direct-Attach Active Optical Cables with SFP+ Connectors

Platform Support
Cisco SFP+ modules are supported on a wide range of Cisco switches and routers*:
● 7600 Series Router ● Catalyst 4500 and 4500-X Series Switches
● ASR 901 ● CRS Router
● ASR 903 ● MDS 9000
● ASR 1000 Series Router ● ME 4500
● ASR 9000 Series Router ● ME 4900NCS 6000 Series Router
● ASR 9000v Series Router ● Nexus 2000, 3000, and 4000 Series Switches
● Catalyst 2350 and 2360 Series Switches ● Nexus 9000 and 9500 (modular) Series Switches
● Catalyst 2960-S, 2960-X, and 2960-XR Series Switches ● RF Gateway Series
● Catalyst 3100 Blade Switches ● SCE 8000
● Catalyst 3560, 3560-E, and 3560-X Series Switches ● Shared Port Adapter (SPA)
● Catalyst 3750, 3750-E, and 3750-X Series Switches ● Unified Computing System (UCS) Switches
● Catalyst 3850 Series Switches

* Not all devices listed support every module. For details about which modules run in which devices and other compatibility information, refer to the
document “Cisco 10 Gigabit Ethernet Transceiver Modules Compatibility Matrix”:
http://www.cisco.com/en/US/docs/interfaces_modules/transceiver_modules/compatibility/matrix/OL_6974.html.
Additional platforms may continually be added; please check the compatibility matrix for the latest information and for the Cisco compatible
operating system for each platform.

Connectors: Dual LC/PC connector (-SR, -LRM, -LR, -ER, -ZR and FET-10G).

Note: Only connections with patch cords with PC or UPC connectors are supported. Patch cords with APC
connectors are not supported. All cables and cable assemblies used must be compliant with the standards
specified in the standards section.

© 2016 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 5 of 12
 Product Specifications
Table 1 provides cabling specifications for the Cisco SFP+ modules.

Table 1. SFP+ Port Cabling Specifications

Cisco SFP+ Wavelength (nm) Cable Type Core Size Modal Bandwidth Cable
(Microns) (MHz*km)*** Distance*
Cisco SFP-10G-SR-Sa 850 MMF 62.5 160 (FDDI) 26m
Cisco SFP-10G-SR 62.5 200 (OM1) 33m
Cisco SFP-10G-SR-X 50.0 400 66m
50.0 500 (OM2) 82m
50.0 2000 (OM3) 300m
50.0 4700 (OM4) 400m
Cisco SFP-10G-LRM 1310 MMF 62.5 500 220m
SMF 50.0 400 100m
50.0 500 220m
G.652 - 300m
Cisco SFP-10G-LR-Sa 1310 SMF G.652 - 10km
Cisco SFP-10G-LR
Cisco SFP-10G-LR-X
Cisco SFP-10G-ER-S****a 1550 SMF G.652 - 40km**
Cisco SFP-10G-ER****
Cisco SFP-10G-ZR-S*****a 1550 SMF G.652 - 80km
Cisco SFP-10G-ZR

Cisco FET-10G 850 MMF 50.0 500 (OM2) 25m

50.0 2000 (OM3) 100m
50.0 4700 (OM4) 100m

Cisco SFP-10G-BXD-I 1330 SMF G.652 - 10km

Cisco SFP-10G-BXU-I 1270 SMF G.652 - 10km
Cisco SFP-10G-BX40D-I 1330 SMF G.652 - 40km

Cisco SFP-10G-BX40U-I 1270 SMF G.652 - 40km

Cisco SFP-H10GB-CU1M - Twinax cable, passive, - - 1m
30AWG cable assembly

Cisco SFP-H10GB-CU1-5M - Twinax cable, passive, - - 1.5m

30AWG cable assembly
Cisco SFP-H10GB-CU2M - Twinax cable, passive, - - 2m
30AWG cable assembly
Cisco SFP-H10GB-CU2-5M - Twinax cable, passive, - - 2.5m
30AWG cable assembly

Cisco SFP-H10GB-CU3M - Twinax cable, passive, - - 3m

30AWG cable assembly
Cisco SFP-H10GB-CU5M - Twinax cable, passive, - - 5m
24AWG cable assembly
Cisco SFP-H10GB-ACU7M - Twinax cable, active, 30 - - 7m
AWG cable assembly

Cisco SFP-H10GB-ACU10M - Twinax cable, active, 28 - - 10m

AWG cable assembly
Cisco SFP-10G-AOC1M - Active Optical Cable - - 1m
assembly
Cisco SFP-10G-AOC2M - Active Optical Cable - - 2m
assembly

Cisco SFP-10G-AOC3M - Active Optical Cable - - 3m

assembly
Cisco SFP-10G-AOC5M - Active Optical Cable - - 5m
assembly

© 2016 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 6 of 12
 Cisco SFP+ Wavelength (nm) Cable Type Core Size Modal Bandwidth Cable
(Microns) (MHz*km)*** Distance*
Cisco SFP-10G-AOC7M - Active Optical Cable - - 7m
assembly
Cisco SFP-10G-AOC10M - Active Optical Cable - - 10m
assembly

*
Minimum cabling distance for -SR, -LRM, -LR, -ER modules is 2m, according to the IEEE 802.3ae.
**
Links longer than 30km are considered engineered links as per IEEE 802.3ae.
***
Specified at transmission wavelength.
****
Requires 5 dB 1550nm fixed loss attenuator for < 20km. Attenuator is available as a spare.
The part number is 15216 ATT LC 5=.
*****
Requires 15dB attenuator if Link Distance < 5km.
Requires 10dB attenuator if Link Distance is between 5km and 25km.
Requires 5dB attenuator if Link Distance is between 25km and 45km.
Attenuator is available as a spare. The part numbers:
 5dB - 15216 ATT LC 5=
 10dB - 15216 ATT LC 10=
 15dB - 15216 ATT LC 15=
a
- No FCoE support

Table 2 lists the main optical characteristics for the Cisco SFP+ modules.

Table 2. Optical Transmit and Receive Specifications

Product Type Transmit Power (dBm)* Receive Power (dBm)* Transmit and
Receive Wavelength
Maximum Minimum Maximum Minimum (nm)

Cisco SFP-10G-SR-S 10GBASE-SR 850nm -1.2** -7.3 -1.0 -9.9 840 to 860
Cisco SFP-10G-SR MMF

Cisco SFP-10G-SR-X 10GBASE-SR, 10GBASE- -1.2** -7.3 -1.0 -9.9 840 to 860
SW and OTU2e 850nm
MMF
Cisco SFP-10G-LRM 10GBASE-LRM 1310nm 0.5 -6.5 0.5 -8.4 (in 1260 to 1355
MMF and SMF average) and -
6.4 (in OMA)***
Cisco SFP-10G-LR-S 10GBASE-LR 1310nm 0.5 -8.2 0.5 -14.4 1260 to 1355
Cisco SFP-10G-LR SMF

Cisco SFP-10G-LR-X 10GBASE-LR, 10GBASE- 0.5 -8.2 0.5 -14.4 1260 to 1355
LW and OTU2e 1310nm
SMF
Cisco SFP-10G-ER-S 10GBASE-ER 1550nm 4.0 -4.7 -1 -15.8 1530 to 1565
Cisco SFP-10G-ER SMF

Cisco SFP-10G-ZR-S 10GBASE-ZR 1550nm 4.0 0 -7 -24 1530 to 1565

SMF
Cisco FET-10G FET-10G 850nm MMF -1.3 -8 -1 -9.9 840 to 860

Cisco SFP-10G-BXD-I 10G-SFP Bidirectional for 0.5 -8.2 0.5 -14.4 1320 to 1340 (Tx)
10km 1260 to 1280 (Rx)
Cisco SFP-10G-BXU-I 10G-SFP Bidirectional for 0.5 -8.2 0.5 -14.4 1260 to 1280 (Tx)
10km 1320 to 1340 (Rx)
Cisco SFP-10G-BX40D-I 10G-SFP Bidirectional for 4.5 -2.7 -9 -21.2 1320 to 1340 (Tx)
40km 1260 to 1280 (Rx)

Cisco SFP-10G-BX40U-I 10G-SFP Bidirectional for 4.5 -2.7 -9 -21.2 1260 to 1280 (Tx)
40km 1320 to 1340 (Rx)

*
Transmitter and receiver power is in average, unless specified.

© 2016 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 7 of 12
 **
The launch power shall be the lesser of the class 1 safety limit or the maximum receive power. Class 1 laser requirements are
defined by IEC 60825-1: 2001.
***
Both average and OMA specifications must be met simultaneously.

Table 3 details optical specifications for the Cisco SFP-10G-ZR modules.

Table 3. SFP-10G-ZR Optical Parameters

Parameter Symbol Minimum Typical Maximum Units Notes and Conditions

Transmitter
Transmitter wavelength 1530 1565 nm
Side-mode suppression SMSR 30 dB
ratio
Transmitter extinction ratio 9 dB
Transmitter optical output Pout 0 4.0 dBm Average power coupled into single-mode fiber
power
Receiver
Receiver optical input 1260 1565 nm Receiver Sensitivity specified over 1530-1565nm only,
wavelength with 3dB degradation permitted from 1260-1530nm
Receiver damage threshold +5 dBm
Receiver Overload -7 dBm

Receiver performance at 10GE LAN and 10GE WAN rates, non-FEC application
Receiver sensitivity -24 dBm At BER=1E-12 with PRBS31 and 10GE frame
Chromatic Dispersion 3 dB
Penalty@ 1600 ps/nm

Receiver performance at OTU2/OTU2e rates, FEC application

Receiver sensitivity -27 dBm At Pre-FEC BER=1E-5 for GFEC and Pre-FEC
BER=7E-4 for EFEC with PRBS31 and OTU2 frame
Chromatic Dispersion 3 dB
Penalty@ 1300 ps/nm

Note: Parameters are specified over temperature and at end of life unless otherwise noted. When shorter
distances of single-mode fiber are used (<40km), an inline optical attenuator must be used to avoid overloading
and damaging the receiver.

Table 4 describes the bail latch color code for each type of optical SFP+ module.

Table 4. SFP+ Optical Modules Color Code

Product Bail Latch Color

Cisco SFP-10G-SR-S Beige
Cisco SFP-10G-SR
Cisco SFP-10G-SR-X
Cisco SFP-10G-LRM Orange
Cisco SFP-10G-LR-S Blue
Cisco SFP-10G-LR
Cisco SFP-10G-LR-X
Cisco SFP-10G-ER-S Red
Cisco SFP-10G-ER

Cisco SFP-10G-ZR-S Green

Cisco SFP-10G-ZR
Cisco FET-10G Brown

© 2016 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 8 of 12
 Product Bail Latch Color
Cisco SFP-10G-BXD-I Blue
Cisco SFP-10G-BXU-I
Cisco SFP-10G-BX40D-I Red
Cisco SFP-10G-BX40U-I
Cisco SFP-H10GB-CU1M Beige
Cisco SFP-H10GB-CU1-5M Black
Cisco SFP-H10GB-CU2M Brown
Cisco SFP-H10GB-CU2-5M Yellow
Cisco SFP-H10GB-CU3M Orange
Cisco SFP-H10GB-CU5M Gray
Cisco SFP-H10GB-ACU7M Blue
Cisco SFP-H10GB-ACU10M Red

Cisco SFP-10G-AOC1M Beige

Cisco SFP-10G-AOC2M Brown
Cisco SFP-10G-AOC3M Orange

Cisco SFP-10G-AOC5M Gray

Cisco SFP-10G-AOC7M Blue
Cisco SFP-10G-AOC10M Red

Table 5 provides the maximum power consumption and operating temperature range ratings per Cisco SFP+
module.

Table 5. SFP+ Modules Maximum Power Consumption

Product Power Consumption (W) Operating Temperature Range

Cisco SFP-10G-SR-S 1 COM
Cisco SFP-10G-SR

Cisco SFP-10G-SR-X 1 EXT

Cisco SFP-10G-LRM 1 COM
Cisco SFP-10G-LR-S 1 COM
Cisco SFP-10G-LR
Cisco SFP-10G-LR-X 1 EXT
Cisco SFP-10G-ER-S 1.5 COM
Cisco SFP-10G-ER
Cisco SFP-10G-ZR-S 1.5 COM
Cisco SFP-10G-ZR

Cisco FET-10G 1 COM

Cisco SFP-10G-BXD-I 1 IND
Cisco SFP-10G-BXU-I

Cisco SFP-10G-BX40D-I 1.2 IND

Cisco SFP-10G-BX40U-I
Cisco SFP-H10GB-CU1M 1 COM

Cisco SFP-H10GB-CU1-5M 1 COM

Cisco SFP-H10GB-CU2M 1 COM
Cisco SFP-H10GB-CU2-5M 1 COM
Cisco SFP-H10GB-CU3M 1 COM
Cisco SFP-H10GB-CU5M 1 COM

© 2016 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 9 of 12
 Product Power Consumption (W) Operating Temperature Range
Cisco SFP-H10GB-ACU7M 1 COM
Cisco SFP-H10GB-ACU10M 1 COM
Cisco SFP-10G-AOC1M 1 COM
Cisco SFP-10G-AOC2M 1 COM
Cisco SFP-10G-AOC3M 1 COM
Cisco SFP-10G-AOC5M 1 COM
Cisco SFP-10G-AOC7M 1 COM
Cisco SFP-10G-AOC10M 1 COM

Dimensions
Dimensions (H x W x D): 8.5 x 13.4 x 56.5mm. Cisco SFP+ connectors typically weigh 75 grams or less.

Environmental Conditions and Power Requirements

Operating temperature range:

● Commercial temperature range (COM): 0 to 70°C (32 to 158°F)

● Extended temperature range (EXT): -5 to 85°C (23 to 185°F)
● Industrial temperature range (IND): -40 to 85°C (-40 to 185°F)
● Storage temperature range: -40 to 85°C (-40 to 185°F)

Warranty
● Standard warranty: 1 year
● Extended warranty (optional): Cisco SFP+ modules can be covered in a Cisco SMARTnet® Service support
contract for the Cisco switch or router chassis

Ordering Information
Table 6 provides the ordering information for Cisco SFP+ modules and related cables.

Table 6. Ordering Information

Description Product Number

Cisco 10GBASE-SR SFP+ Module for MMF S-Class SFP-10G-SR-S
Cisco 10GBASE-SR SFP+ Module for MMF SFP-10G-SR
Cisco multirate 10GBASE-SR, 10GBASE-SW and OTU2e SFP+ Module for MMF, extended temperature range SFP-10G-SR-X

Cisco 10GBASE-LRM SFP+ Module for MMF and SMF SFP-10G-LRM

Cisco 10GBASE-LR SFP+ Module for SMF S-Class SFP-10G-LR-S
Cisco 10GBASE-LR SFP+ Module for SMF SFP-10G-LR

Cisco multirate 10GBASE-LR, 10GBASE-LW and OTU2e SFP+ Module for SMF, extended temperature range SFP-10G-LR-X
Cisco 10GBASE-ER SFP+ Module for SMF S-Class SFP-10G-ER-S
Cisco 10GBASE-ER SFP+ Module for SMF SFP-10G-ER

Cisco 10GBASE-ZR SFP+ Module for SMF S-Class SFP-10G-ZR-S

Cisco multirate 10GBASE-ZR, 10GBASE-ZW and OTU2e SFP+ Module for SMF SFP-10G-ZR
Cisco 10GBASE-BX10-D Bidirectional for 10km SFP-10G-BXD-I
Cisco 10GBASE-BX10-U Bidirectional for 10km SFP-10G-BXU-I
Cisco 10GBASE-BX40-D Bidirectional for 40km SFP-10G-BX40D-I

© 2016 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 10 of 12
 Description Product Number
Cisco 10GBASE-BX40-U Bidirectional for 40km SFP-10G-BX40U-I
10GBASE-CU SFP+ Cable 1 Meter, passive SFP-H10GB-CU1M
10GBASE-CU SFP+ Cable 1.5 Meter, passive SFP-H10GB-CU1-5M
10GBASE-CU SFP+ Cable 2 Meter, Passive SFP-H10GB-CU2M
10GBASE-CU SFP+ Cable 2.5 Meter, Passive SFP-H10GB-CU2-5M
10GBASE-CU SFP+ Cable 3 Meter, passive SFP-H10GB-CU3M
10GBASE-CU SFP+ Cable 5 Meter, passive SFP-H10GB-CU5M
10GBASE-CU SFP+ Cable 7 Meter, active SFP-H10GB-ACU7M
10GBASE-CU SFP+ Cable 10 Meter, active SFP-H10GB-ACU10M
10GBASE-AOC SFP+ Cable 1 Meter SFP-10G-AOC1M
10GBASE-AOC SFP+ Cable 2 Meter SFP-10G-AOC2M
10GBASE-AOC SFP+ Cable 3 Meter SFP-10G-AOC3M

10GBASE-AOC SFP+ Cable 5 Meter SFP-10G-AOC5M

10GBASE-AOC SFP+ Cable 7 Meter SFP-10G-AOC7M
10GBASE-AOC SFP+ Cable 10 Meter SFP-10G-AOC10M

Regulatory and Standards Compliance

Standards:

● GR-20-CORE: Generic Requirements for Optical Fiber and Optical Fiber Cable
● GR-326-CORE: Generic Requirements for Single-Mode Optical Connectors and Jumper Assemblies
● GR-1435-CORE: Generic Requirements for Multifiber Optical Connectors
● IEEE 802.3: 10-Gigabit Ethernet
● ITU-T G.709: Interfaces for the Optical Transport Network
● ITU-T G.975: GFEC
● ITU-T G.975.1: EFEC
● SFP+ MSA SFF-8431 (Optical Modules, Active Optical Cables, and Passive Twinax cables)
● SFP+ MSA SFF-8461 (Active Twinax cables)

Safety:

● Laser Class 1 21CFR-1040 LN#50 7/2001

● Laser Class 1 IEC60825-1
● Cable jacket of SFP+ copper modules is UL #E116441 Compliant
● All length SFP+ copper cables are ELV and RoHS Compliant

Cisco Capital
Financing to Help You Achieve Your Objectives
Cisco Capital can help you acquire the technology you need to achieve your objectives and stay competitive. We
can help you reduce CapEx. Accelerate your growth. Optimize your investment dollars and ROI. Cisco Capital
financing gives you flexibility in acquiring hardware, software, services, and complementary third-party equipment.
And there’s just one predictable payment. Cisco Capital is available in more than 100 countries. Learn more.

© 2016 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 11 of 12
 Next Steps
Learn more about Cisco 10GBASE SFP+ fiber modules or 10GBase SFP+ copper modules (twinax cable) by
contacting your sales representative or visiting http://www.cisco.com/en/US/products/ps6574/index.html.

For S-Class SFP+ 10 Gigabit Modules, refer to the link below:

http://www.cisco.com/c/en/us/products/interfaces-modules/transceiver-modules/datasheet-listing.html.

Printed in USA C78-455693-17 04/16

© 2016 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 12 of 12