Liquid Dishwashing Soap

Download as pdf or txt
Download as pdf or txt
You are on page 1of 6

SOAP MAKING SEMINAR

LIQUID DISHWASHING SOAP


Materials

1. 500gms Sodium Lauryl Ethyl Sulfate (SLES)


2. 5 lts tap water (PURIFIED)
3. 250gms Sodium Chloride (SALT)
4. 50 ml Coconut Dietanolamide (CDEA)
5. 25 ML Linear Alkaline Benzene Sulfonic Acid (LABS) – anti-cebo
6. 5 ml Np-10 or Tergitol – stronger degreaser
7. 10 ml desired scent (lemon)

Product Option

 Water Soluble Colorring


 Sodium Benzoate – 5gms
 Moisturizer – 10 ml
 VEGO chem – 50ml or SLS - 100gms
 Antibac – 5ml

Procedure

1. Measure all materials properly.


2. Mix SLES in water gradually until it dissolves; must be gradual to normal speed only & into one
direction only to avoid suds production.
3. When SLES has been dissolved, color may be added.
4. Add CDEA, LABS, NP-10, mix well.
5. Add desired scent.
6. Add salt gradually & mix continuously.
7. Let stand for 24 hours until BUBBLES DISAPPEARS.
8. Pour into desires bottle or canister.
MULTI PURPOSE POWDER SOAP
Materials

1. 650 gms Sodium Sulfate


2. 160 gms Soda Ash – dirt slipper
3. 100 gms Zeolite
4. 50 GMS Linear Alkaline Benzene Sulfonic Acid (LABS) – anti-cebo
5. 5 ml desired scent
6. 30 gms Cocofatty Alcohol (CFAS) – dirt separator
7. 10 gms speckles – as desire

Product Options

1. 25 gm VEGO – powder (foam boaster)


2. 5 gms Oxybleach – preserve color
3. 5 gms Calcium Hypochlorite – chlorine
4. 50 gms SLS ( combination of CFAS & SLS) – pampabula
5. Antibac
6. STPP – alternative zeolyte

Procedure

1. Put the sodium sulfate, soda ash, & zeolite together into mixing bowl or basin & mix
thoroughly using both ahnds ( it is recommended to use mask & gloves to avoid powder
suffocation & skin irritation.
2. Pour the LABS gradually & continue mixing. This will serve as the binding agent for the
above ingredients.
3. Pour the desired scent or fragrance.
4. Add the Speckles – CFAS.
5. Pack your newly made powder detergent into desired packaging.
Fabric Conditioner /Softener
Materials

1. 250 gms Fabrict Softener flakes


2. 4 Liters Boiled Water ( can be extended 6 Liters
3. 30ml desire scent
4. Dye water soluble - if desired – food coloring dissolve in water

Product Options

1. 100 ml Antifoam ml (to lessen the bubble)


2. Fixative ( scent retainer)
3. 5 gm Sodium Benzoate (preservative)
4. Softener beads (hot process) softener flakes ( cold process)

Procedure

1. Boil 4 lts of water


2. Add 250gms Softener flakes after boiling. Let it dissolve.
3. Set aside. Let it cool.
4. Add desired softener scent.
5. Add 3 gms Sodium Benzoate ( preservative)
LIQUID HAND SOAP

Materials

1. 500 gms SLES


2. 5-7 lts Tap Water
3. 250 gms Iodized Salt
4. 50 ml CDEA
5. 10 ml Moiturizer – glycerine liquid
6. 10 ml desired scent

Product Option

 Water Soluble Coloring


 5gms Sodium Benzoate (for 1 year)
 50 ml VEGO chem. to add bubbles
 5 ml Antibac
 25-50 gms White Silk – pearlizer

Procedure

1. Measures all materials needed.


2. Mix SLES in water gradually until it dissolves.
3. Add desired coloring.
4. Add CDEA, mix well.
5. Add moisturizer.
6. Add desired scent.
7. Add salt gradually & mix continuously.
8. Let stand for 24 hours until bubbles disappears.
9. Pour into desires bottle or canister.
LIQUID BLEACH
Ingredients

1. 27 Liters water
2. 1 kg Soda Ash (softening)
3. 1 kg Calcium Hypochlotite/Chlorine (whitening)

Procedure

1. In a good container, mix the chlorine with water ( it is advisable to do the procedures
without the sun’s direct light because chlorine power dies when touched with ultra
violet rays)
2. Mix in ONE direction only.
3. When the solution turns white & the chlorine has been completely dissolved, add the
Soda Ash & mix well.
4. When mixed, cover the container & cure for 3 days

DISHWASHING PASTE
Ingredients

1. 240 gms Sodium Sulphate


2. 5 gms Calcium Hypochlorite/Chlorine
3. 300 gms Soda Ash ( dirt slipper)
4. 100 ml CDEA or VEGO (bubbles)
5. 100gms CFAS (dirt separator)
6. 50 ml LABS liquid
7. 5 ml scent (citric or fruity)
8. 200 ml Distilled Water
9. Food coloring (water soluble colouring)
10. 2 tsp Sodium Silicate

Procedure

1. Mix in sequence.
DETERGENT SOAP ( Perla Type)
Materials

1. 1 Gallon Cooking Oil


2. 1 kg Caustica Soda dissolved in 2.5 Lts of water
3. 20ml or 4 tsp scent or fragrance
4. Coloring (oil soluble colouring)
5. 5 tsp Sodium Silicate (optional)
6. 100 ml VEGO or CDEA (optional)
7. Molder
8. Plastic Pail Mixer
9. Cutter or guitar string (metallic)

Procedures

1. Prepare & measure all materials properly.


2. Pour the Caustic Soda into the pail.
3. Pour the cooking oil into the pail.
4. Stir & mix gradually to normal speed and in ONE direction only: this is a hot solution &
fast stirring may

You might also like