SPECIFICATIONS FOR
MODEL SK330LC-6
FULL HYDRAULIC EXCAVATOR
WITH 70FT LONG RANGE ATTACHMENT
(BACK HOE)
NOVEMBER 2002
KOBELCO CONSTRUCTION MACHINERY CO. LTD
Model SK330LC-6
Disclaimer: Select Civil Pty Ltd has created this document from the manufactures specifications and therefore should
be used as a guideline only.
Page 1 of 9
1. Model Kobelco SK330LC
(with 70ft long range attachments)
2. Type Crawler mounted full hydraulic excavator of
full revolving type
3. Front Attachment
3.1 Type Back hoe attachment
3.2 Bucket Capacity JIS Heaped 0.31m3 (0.41cuyd)
3.3 Working Range
3.3.1 Max Digging Reach 21390mm
3.3.2 Max Digging Depth 16190mm
4. Machine Dimensions (see fig.1)
4.1 Overall Length 16890mm
4.2 Overall Width 3400mm
(with 800mm shoe)
4.3 Overall Height 3140mm
5. Weight & ground pressure with standard attachment JIS A 8401
Working Weight Width of Shoe Ground Pressure
38.400kg 800mm 72 kpa (0.73 kgf/cm2)
6. Performance
6.1 Swing Speed 9.1 min (9.1 rom)
6.2 Travel Speed 5.8 / 3.4 km/h
6.3 Gradeability 70% (35deg)
(Gradeability is limited by engine lubrication requirements)
Model SK330LC-6
Disclaimer: Select Civil Pty Ltd has created this document from the manufactures specifications and therefore should
be used as a guideline only.
Page 2 of 9
7. Machine Dimensions (see fig.1)
7.1 Overall Length 16,890mm
7.2 Overall Width 3,400mm
7.3 Overall Height 3,120mm
7.4 Basic Machine Length 5,990mm
7.5 Width of revolving upper structure 3,000mm
7.6 Height of Cab Top 3,120mm
7.7 Radius of Rear End 3,500mm
7.8 Ground Clearance of Rear End* 1,200mm
7.9 Centre Distance of Tumblers 4,050mm
7.10 Overall Length of Crawler 4,980mm
7.11 Overall Width of Crawler 3,200mm
7.12 Crawler Height at Tumbler Centre 1,050mm
7.13 Track Guage 2,600mm
7.14 Width of Crawler Shoe 800mm
7.15 Ground Clearance of Undercarriage* 500mm
*Marked dimensions are not included height of shoe lug
8. Engine
8.1 Maker Mitsubishi Motors Corportation
8.2 Model 6D16-TLE1
6D16-TLUA (for EU)
8.3 Type Water-cooled 4cycle 6 cylinder direct injection
type diesel engine with intercooler turbo-charger
8.4 No. of Cylinders bore and stroke 6-118mm x 115mm
8.5 Displacement 7545 I
8.6 Rated Output Power 177 KW/2.200 rpm
8.7 Maximum Torque 824N m/1,800 rpm
8.8 Cooling System Circulating type with centrifugal pump
8.9 Lubricating System Pressure feed with gear pump
Model SK330LC-6
Disclaimer: Select Civil Pty Ltd has created this document from the manufactures specifications and therefore should
be used as a guideline only.
Page 3 of 9
8.10 Electrical System D.C. 24V
9 Hydraulic System
9.1 Hydraulic Pump
9.1.1 Type Tandem variable displacement piston pumps
9.1.2 Max Flow at Rated Engine Speed Piston 2 x 253 1/min
9.2 Directional Control Valves
9.2.1 Type 6 spool valve
9.2.2 Type of Control Excavating, travel and swing hydraulic pilot
control type
9.3 Relief Valve Setting
9.3.1 Excavating Circuit (main) 34.3 MPa
9.3.2 Travel Circuit 34.3MPa
9.3.3 Swing Circuit 27.5MPa
9.3.4 Pilot Control Circuit 5.0 MPa
9.4 Hydraulic Oil Filters 1-30m return line filters in hydraulic oil reservoir
(B to > 1.4) (JIS B 8358)
1-177m Suction strainer in hydraulic oil reservoir
(80 mesh)
10. Controls
10.1 Operator’s Cab
Structure Fully enclosed steel structure
Position Left side front of upper structure
10.2 Operator’s Seat Adjustable and reclining device
10.3 Operation
10.3.1 Engine Control Rotary – type electric throttle
10.3.2 Travel Tow hand levers or two foot pedals for forward
and backward operations of each track
independently.
10.3.3 Escavating and Swing Two hand levers for four operations
Model SK330LC-6
Disclaimer: Select Civil Pty Ltd has created this document from the manufactures specifications and therefore should
be used as a guideline only.
Page 4 of 9
11. Swing Mechanism
11.1 Swing circle Single row ball bearing with internal gear
11.2 Hydraulic Motor 1 x axial piston type
11.3 Reduction Unit 2 stage planetary gear unit
11.4 Swing brake Hydraulic Brake
11.5 Parking brake Oil disk brake, hydraulic operated automatically
12. Undercarriage
12.1 Propel Mechanism
12.1.1 Type of Propel Full hydraulic
12.1.2 Hydraulic Motor 2 x axial piston type
12.1.3 Reduction Unit 2 stage planetary gear units directly drive
sprockets
12.2 Brake
12.2.1 Travel Brake Hydraulic brake per motor
12.2.2 Parking Brake Oil disk brake per motor
12.2.3 Parking Brake Operation Automatically set while travel levers are neutral
or engine stips
12.3 Type of Steering Two travel levers control each hydraulic motor
independently for pivot and spin turn
12.4 Track
12.4.1 Crawler Shoe
Type Tractor type triple grouser shoe
No. for each side 48
Height of grouser shoe 30mm
12.4.2 Upper Roller 2 for each side, Inside flanged with floating seals
12.4.3 Lower Roller 8 for each side, outside flanged with floating
seals
12.4.4 Idler 1 for each side, inside flanged with floating seals
12.4.5 Track tension mechanism Hydraulic track adjusters and cushion springs
Model SK330LC-6
Disclaimer: Select Civil Pty Ltd has created this document from the manufactures specifications and therefore should
be used as a guideline only.
Page 5 of 9
13. Backhoe Attachment (Long Range
Arm 9.6m)
13.1 Capacity, dimensions and working
ranges (see fig.3)
(1) Bucket capacity JIS heaped 0.31m3 (0.41cuyd)
(SAE heaped 0.31m3 (0.41cuyd)
(struck 0.23m3 (0.30cuyd)
(2) Bucket width with side cutters 700mm
Bucket width without side cutters 600mm
(3) Bucket weight 265kg
(4) Max digging reach (A) 21,390mm
(5) Max digging reach at ground level (A’) 21,290mm
(6) Max digging depth (B) 16,190mm
(7) Max digging height (C) 17,310mm
(8) Max dumping clearance (D) 14,320mm
(9) Min dumping clearance (E) 2,380mm
(10) Max vertical digging depth (F) 14,000mm
(11) Min swing radius (G) 6,180mm
(12) Height at min swing radius (H) 15,090mm
(13) 8 feet level digging depth (J) 16,120 m
13.2 Hydraulic cylinders Double voting type
No. Bore x Stroke
Boom 2 140mm x 1.542mm
Arm 1 170mm x 1.790mm
Bucket 1 95mm x 885mm
13.3 Tooth force
(1) Max radial tooth force (bucket Cyl) 88 kN (JIS A 8404)
80 kN (SAE)
Model SK330LC-6
Disclaimer: Select Civil Pty Ltd has created this document from the manufactures specifications and therefore should
be used as a guideline only.
Page 6 of 9
(2) Max radial tooth force (arm Cyl) 74 kN (JIS A 8404)
74 kN (SAE)
14. Service refill capacities
(1) Fuel Tank 580 litre
(2) Hydraulic Oil Reservoir 206 litre
(3) Hydraulic system including hydraulic
oil reservoir 351 litre
(4) Cooling System 34 litre
(5) Lubrication
Engine oil 28 litre
Model SK330LC-6
Disclaimer: Select Civil Pty Ltd has created this document from the manufactures specifications and therefore should
be used as a guideline only.
Page 7 of 9
Figure 1 Basic Machine Dimensions SK330LC-6
3400mm
800mm
4980mm
3140mm
16890mm
Model SK330LC-6
Disclaimer: Select Civil Pty Ltd has created this document from the manufactures specifications and therefore should be used as a guideline only.
Page 8 of 9
FIG. 3 WORKING RANGE OF KOBELCO SK330LC-6
G = 6180mm
C = 17310 mm
H = 15090mm
A = 21390mm
B = 16190mm
Model SK330LC-6
Disclaimer: Select Civil Pty Ltd has created this document from the manufactures specifications and therefore should be
used as a guideline only.
Page 9 of 9
