3rd Sem End Term 2014

I .
Roll No.
.•
TMA-305
B. Tech. (CSE) (Third Semester)
Back Paper EXAMINATION,2014
GRAPHTHEORYAND COMBINATORICS
Time: Three Hours] [Maximum Marks: 100
Note: (iJ, This question pape~, contains two Sections:
Section A (Part I and U) and Section B.
(ii) Answer all questions in Section A (Part I)
briefly in not more than 50' words. Each
question carries 2 marks.
(hi) Answer any four questions from Section A
(Part 11).Each question carries 6 marks.
(iv) Answer any four questions from Section B.
Each question carries 14 marks.
Section-A
Part-I 2 each
1. Attempt all questions briefly in not more than 50
words:
(i) Find the number of permutations of 9 objects
in which 5 or more objects are in their
natural position.
(ii) Define Rook Polynomial.
.'"
K-99 P. T.O.
, .
[2] TMA-305
[3] TMA-305
(iii) Is it possible to have a group of seven persons ••

Part-II 6 each
such that each person in the group knows
exactly three other persons in the group. 2. Attempt any!ourofthe following:
'~~
~.'::',<' '.,':':\'.. . '(lv)
" ., In how many ways can 7 persons form a (a) Show that the 'degree of a vertex of a simple
\ ".'
ring? graph G on n vertices cannot exceed n - 1.
(v) Find whether the .cornplete matching of the (b) Prove that a graph is connected iff it has a
graph is possible, if not justify your answer. spanning tree .
•.
(c) A committee of 5 is to be formed out of 6 gents
and 4 ladies. In how many ways this can be
done when (i) at least 2 ladies are included. (H)
at most 2 ladies are included .
.
j
(d) Find the chromatic number and chromatic
polynomial for the following graph using
(Vi) Draw the unique binary tree for the given
decomposition theorem.
expression:
(X-2y)3
a+b)
( -c- Vl., •• e.
.(vii) Show that the condition in S 3 n - 6 is not a
sufficient condition for a connected simple
graph with n vertices and m edges to be
planar. b
•
(viii) Solve the recurrence relation. ~ = ctn-l + (e) How many positive integer not exceeding 1000
''',
2, n ~ 2 . subject -to the initial condition
are divisible by 7 or 1 i ?
al = 3.
(t) Suppose that a tree T has two vertices.' of
(ix) Find the exponential generating function for
the sequence npo, np1, nP2 ..... , npn· degree 2, four vertices of degreeS. and three .'
(x) Prove that every connected simple planar vertices of degree 4. Find the number of
graph G contains a vertex of degree at most 5. pendant vertices in T.
K-99 K-99 P. T.O.

[4] TMA-305
[5] TMA-305
Section-B 14 (7+7) each

6. (a) Define: Edge disjoint and vertex disjoint sub- "_
Note: Attempt any four questions. graphs of a graph. Prove that a tree with n
vertices has n - 1edges.
3. (a) Define the following: \
(i) Permutation and combination (b) Find a maximum flow for the given transport
network from s to t.
(ii) Sum and Product rules ,
(b) Solve the recurrence relation:
Clr - 7 -Clr-l + 10 Clr-2 = 2T ..
s
4. [a] Prove that every tree with two or more
vertices is 2-chromatic.
(b) Define isomorphism of the graphs. Find 7. (a) Write Prim's algorithm. Prove that if a graph
whether the following graphs are isomorphic has exactly two vertices of odd degree then
or not. there must be a path connecting these vertices.
(b) Find a minimal spanning tree for the weighted
v, ~ 8 c. Q. graph using Kruskal's algorithm.
Vs • • r - . ~ .~
~
e.
p F
S. (a) Write Dijkstra's algorithm. 8. (a) Define the following:

~
(b) Find the shortest distance between a andf. (i) Spanning trees
J. (H) Connected graphs
(Hi) Hamiltonian graphs
f (iv) Paths and Circuits

(}... (b) Prove that a connected graph is Eulerian iff all
the vertices of the graph are of even degree.
c.
TMA-30S 100
K-99 K-99
I •
~
Roll No.
"
TMA-304
B. Tech. (ECE) (Third Semester)
ADVANCEDENGINEERINGMATHEMTICS
Note: (i) This question paper contains two Sections:
I
Section A (Part I and 11) and Section B.
(H) Answer all questions in Section A (Part I)
briefly in not more than 50 words. Each
(Hi) Answer any four questions from Section A
Each question carries 14 marks. "
Section-A
Part-I 2 each
words:
(i) Define kinds of Singularity.
(ii) Define Neighbourhood of a point with an
example.
(iii) Define sequences.
K-99" P. T.O.
[2] TMA-304 [ 3] TMA-304
(iv) Define Random variable and Moment where C is the circle

\
generating function. "

(i) [z] = 2-
(v) The distribution function a RVX is given by
F (x) = 1 - (1 + x) e-x, x;::: 0 find out
(ii) Iz + il = ..J3.
Find I.o ~dx
6
density function. (t) approximately using Simpson's
l+x
(vi) find "C" of the mean value theorem: 3/8 rule of integration.
f (x) = x (x - 1) (x - 2);a = 0,b = 1/2 Section-B 14 (7+7) each
(vii) Define normal distribution.
..
Note: Attempt any four questions.
(viii) Write the formula of Bessel's Interpolation.
.3. (a) Show that the sequence < Sn > defined by :
(ix) Discuss the analyticity of the function
1 1 1
f (z) = Iz12. Sn=-+-+
n+l n+2
+-n+n
(x) Prove that the function f (x) = [x] is
converges.
continuous at x = 0 but not differentiable at
x = O. (b) Check the convergence of the series by Ratio
Part-II 6 each test:
\ 2 6 2 14 3 2n - 2 n-l
2. Solve any four of the following: \
l+ x+gx
S +17x + .... -x +
(a) Prove that every convergent seAuence is
bounded. 4. (a) Test the convergence of the series by
(b) Find f (z) in terms of z using Milne's-Thomson Comparison test:
method e2 x (x cos 2 Y - Ysin2 y). , .J2-1..J3-1 #-1 ..[5-1
(c) Show that the sequence < Sn >, where 33 - 1 43 - 1 + 53 - 1 + 63 - 1 + .
Sn = -
( l)n-l
n
converges to O. (b) State and prove Cauchy Integral formula. . .,
(d) Prove that <p is not nbd of any real number. 5. (a) The probability that a bomb dropped from a
(e) Determine poles and residue at each pole of plane will strike the target is 1/5. If six bombs
the function: are dropped, find the probability that:
( J 12z-7
f z) = ----:-,...----
C
(i) Exactly 2 will strike the target.
(ii) At least 3 will strike the target.
K-99 K-99 P. T.O.

, .
TMA-304 [5] TMA-304

[41
(b) From the following table of half-yearly
[b] Find the expectation and variance' of the
premium for policies maturing at different
random variable X,whose p. d. f. given by :
ages, estimate the premium for policy
2X
f (x) = fZ e- ~f x> 0 . maturing at the age of 63 .
to If otherwise
Age Premium (in ~)
6. (a) Discrete random variable X has the probability
45 114'84
function given below:
50 96'16
ValuesX, x p (x)
55 83·32
0 0
60 74'48
1 a 65 68'48
Z ' Za
8. (a) Using Runge-Kutta method of order 4,
3 .•.. Za
compute y (0 ,2) from 10 dy = X2 + y2,
4 3a dx
a2
Y (0) = 1, h = 0 . 1.
5
(b) Using Bolzano method,' find a real root
6 Z a2
between (a, 1) of the equation:
7 a2 + a
7 f (x) = 3 x- vi + sin x = 0
Find (i) the value of a (ii) P (X < 5), P (X ~ 6)
and P (0 < X < 5).
(b) State RoUe's theorem and discuss the
applicability of Rolle's theorem to
f(x)
X2
= log [ x(a+b)
+ ab 1 ..
in the interval [a, b].

7. (a) Find out the moment generating function of
poisson distri~ution given by :
AX
P (x) = e-A.- TMA-304 100
{X
K-99
K-99
------
..
Roll No.
TMA-302
,B. Tech. (eE) (Third Semester)
ENGINEERINGMATHEMATICS-II ,
.3,1f;~
Time: ThreeHours] [Maximum Marks: 100 ..
I Section A (Part I and 11) and Section B.
(Hi) Answer any four questions from Section A ••
Section-A
Part-I 2 each
1. Attempt all questions briefly in not more than 50 •
words:
(i) Write the Weddle's rule of numerical
integration.
(ii) Define bilinear transformation.
(iii) Define Poisson's probability distribution.
K-89 P. T. O.
[2] TMA-302 [3] TMA-302
(iv) Define change of scale property of Fourier (e) Fit a straight line to the following data:
transform. x y ••
(v) Define Singular points of an analytic function 1 14
with an example. 2 27
(vi) If the regression coefficients are 0·8 and 0'2, 3 40
what would be the value of coefficient of 4 55
correlation? 5 68
(vii) Define skewness and write the formula for (t) The following table gives age (x) in years of
coefficient of skewness. cars and annual maintenance cost (y) in
(viii) A dice is tossed thrice. A success is getting 1 hundred rupees:
or 6 on a toss, Find the mean and variance of x y
the number of successes. 1 15
(ix) Define random variable : Discrete and 3 18
continuous. 5 21
(x) Define moment generating function. 7 23
Part-II 6 each 9 22
2. Write short notes on any four of the following: Estimate the maintenance cost for a 4 year old
car after finding the regression equation.
(a) Express the function F(x) = ~:~~~:;:~ ~}as a Section-B 14 (7+7) each
Fourier integral. Note: Attempt any four questions.
(b) Prove that an analytic function ~ith constant 3. (a) 'Find th~ Fourier Sine transform of e-=.
x I
Hence
modulus is constant. find the Fourier sine transform of.!.. •
x
(c) Find a real root of x3 - 5x +1=0 using
(b) Find the Fourier transform of :
Bisection method.
(1-x2, if lx] < 1
r
(d) Compute the value of !'06 dx 2
l+x
using Simpson's to, if [x] > 1
1/3 rd rule taking h = 1.
K-89
K-89 p, T.O.
•
[4] TMA-302 [5] TMA-302
4. (a) An electrostatic field in the xy-plane is given by (b) Evaluate:

the potential function <I>= 3 x2y - y3, find the
stream function. L1",;sinx + cosx dx
(b) Find the image of /z = 3 i/ = 3 under the

by using Simpson's three-eighth rule by
. 1
mappmg w =-. dividing the interval (0, 1) into six equal parts.
z
5. (a) Using Newton-Raphson's method, find the real 7. (a) Use Cardan's method to solve x3 - 15x -
root of x IOg10 x = 4 . 77 correct to four 126 = O.
decimal places. (b) A manufacturer of envelopes knows that the
(b) Show that Newton-Raphson's method is weight of the envelopes is normally distributed
quadratic convergent. with mean 1·9 gm and variance 0·01 gm. Find
6. (a) A discrete random variable X has the following how many envelopes weighing:
probability distribution : (i) 2 gm or more.
Value of X, x P (X= x) (ii) 2·1 gm or more,
0 A can be expected in a given packet of 1000
envelopes.
1 3a
[Given : If t is the normal variable, then
2 Sa <I>(0 s t $ 1) = 0 . 3413 and <I>(0 s t s 2) =
3 7a o . 4772].
4 9a 8. (a) Fit a second degree parabola by method of
5 lla least squares to the following data:
6 .•13a x y
7 15a 10 14
8 17a 12 17
(i) Find the value of a. 15 23

23 25
(ii) Find P(X ~ 3), P(O < X < 3), P(X ~ 3).
20 21
(iii) Find the distribution function X.
K-89
K-89 P. T.O.
[6] TMA-302
[b] Find the measure of Kurtosis for the following

distribution: '
Class Frequency
45-52 4
52-59 ,9
59-66 12
66-73 4
73-80 3
80-87 2
87-94 1
<,
TMA-302
100
K-89
••
TMA-302
,H. Tech. (eE) (Third Semester)
ENGINEERINGMATHEMATICS-II
'-I'."
I Section A (Part I and 11) and Section B.
(iii) Answer any four questions from Section A
Section-A , ,
Part-I 2 each
words:
(i) Write the Weddle's rule of numerical
integration.
(ii) Define bilinear transformation.
(iii) Define Poisson's probability distribution.
K-89 P. T. O.
.
[2] TMA-302 [3] TMA-302
(iv) Define change of scale property of Fourier (e) Fit a straight line to the following data:
transform. x y
(v) Define Singular points of an analytic function "
1 14
with an example. 2 27
(vi) If the regression coefficients are 0·8 and 0'2, 3 40
what would be the value of coefficient of 4 SS
correlation? 5 68
(vii) Define skewness and write the formula for (t) The following table gives age (x) in years of
coefficient of skewness. cars and annual maintenance cost (y) in
(viii) A dice is tossed thrice. A success is getting 1 hundred rupees:
or 6 on a toss. Find the mean, and variance of x y
the number of successes. 1 15
(ix) Define random variable : Discrete and 3 18
continuous. 5 21
(x) Define moment generating function. 7 23
Part-II 6 each 9 22
2. Write short notes on any four of the following: Estimate the maintenance cost for a 4 year old
car after finding the regression equation.
(a) Express the function F(x) = ~:~~~:;:~ ~J as a Section-B 14 (7 + 7) each
Fourier integral. Note: Attempt any four questions.
ax
Cb) Prove that an analytic function ~ith constant 3. [a] 'Find the Fourier Sine transform of e- . Hence
x I
modulus is constant. find the Fourier sine transform of.!..

x
(c) Find a real root of x3 - 5x +1=0 using
[b] Find the Fourier transform of :
Bisection method.
1-X2, if [x] < 1
(d) Compute the value
6
of f. d\ {
o , if [x] > 1
o l+x using Simpson's
1/3 rd rule taking h = 1.
K-89 K-89 P. T.O.

•
[5] TMA-302
[4] TMA-302 (b) Evaluate:

..
4. (a) An electrostatic field in the xy-plane is given by L1..jSin x + cos x dx
the potential function =
<l> 3 x2y - y3, find the
stream function. by using Simpson's three-eighth rule by
(b) Find the image of [z = 3 il = 3 under the dividing the interval (0, 1) into six equal parts.
. 1
mappmg w =-. 7. (a) Use Cardan's method to solve x3 - 15 x-
z
126 = O.
5. (a) Using Newton-Raphson's method, find the real
root of x IOglO x = 4 . 77 correct to four (b) A manufacturer of envelopes knows that the
decimal places. weight of the envelopes is normally distributed

with mean 1·9 gm and variance 0·01 gm. Find
(b) Show that Newton-Raphson's method is
how many envelopes weighing:
quadratic convergent.
(i) 2 gm or more.
6. (a) A discrete random variable X has the following
probability distrlbution :
Cii) 2·1 gm or more,
can be expected in a given packet of 1000
Value of X, x P (X= x)
envelopes.
0 A [Given : If t is the normal variable, then
1 3a <P (0 ~ t ~ 1) =
0 . 3413 and <P (0 ~ t ~ 2) =
2 Sa
o. 4772].
8. (a) Fit a second degree parabola by method of
3 7a
least squares to the following data :
4 9a
x y
5 lla
10 14
6 ..13a
12 17
7 15a 23
15
8 17a
23 25
(i) Find the value of a. 20 21
(ii) Find P(X < 3), P(O < X < 3), P(X ~ 3).
K-89
P. T.O.
K-89
[6 ] TMA-302
..
Cb) Find the measure of Kurtosis for the following
distribution:
Class Frequency
45-52 4
52-59 9
59-66 12
66-73 4
73-80 3
80-87 2
87-94 1
'"
100
TMA-302
K-89
Roll No.
..
TMA-303
B. Tech. (ME + AME) (Third Semester)

ENGINEERINGMATHEMATICS-Ill
Time: Three Hours] , [ Maximum Marks: 100
Note: (il This question paper contains two Sections :
Section A (Part I and 11) and Section B.
"
Section-A
Part-I I
2 each
words:
(i) Write the definition of Harmonic function.
(ii) Verify Cauchy Riemann equation for
f (z) = Z2.
K-9< P. T.O.
I·
[2] TMA-303 [3] TMA-:303
"
(iii) Find out: (c) Find the bilinear transformation which maps
the point z = i, -1, 1 in the z-plane into the
_1 dz
Jc z- 2
ff)
points w = 0,1, eo in w-plane.
Evaluate:
where C is the circle Iz - 11 = ~. dx
1
1
2
(iv) Evaluate c: Z2 dz along the line y = x.

using
o 1+x2
Simpson's one-third rule taking
(v) Find the invariant points of the h =..0 . 25.
transformation:
(e) If [(x) = x3 find the divided difference
. w-
_ (Z - 3 i) [(a, b, c) .
2,
i z-1
(vi) Define conformal mapping. (t) Assuming half the population of a town
consumes chocolates and that 100
(vii) Write the Simpson's three-eight rule. investigators each take 10 individuals to see
(viii) Find the first divided difference for the, whether they are consumers,' how many
arguments 2, 5 if: investigators would you expect to report that
[(x) = X2 - 3x +4 three people or less were consumers?
Section-B 14 (7+7) each
(ix) Define Normal distribution.
Note: Attempt any [our questions.
(x) If I
[ (x) = kx (1 - x), 0 ~ x :5 1 3. (a) Find the analytic function [(z) = u + iv,

is probability density function then find the where u (x, y) = X4 - 3 X y3 + 3 X2 - 3 Y
value of k. +2x.
Part-II 6 each (b) For the mapping, w (z) = ~ find the image of •
z
2. Solve any [our of the following: the family of circles X2 + y2 = ax, where a is
real.
(a) Evaluate:
1+i
(a) Show that the function:
fa Z2 dz
4.
[(z) = {e-Z- ;
4
z 1= 0
along the curve z (t) = t + tt2. o ; z =0
(b) Write the Cauchy Integral formula and prove is not analytic at z = 0, although, Cauchy-
it. Riemann equations are satisfied at the point.
K-91 K-91 P. T.O.

I .
TMA-303 [5 ] TMA-303
[4]
(91 Find f (x) for x = 1·5 from the following data 7. (a) Let the random variable X assume the value 'r'
by using Newton's forward difference with the probability law:
"
interpolation formula: p (X = r) = qT-l P ; r = 1, 2, 3, .
-
.. f (x) Find the moment generating function of X.
x
2 Cb) If:
0
2 16 P ex) = 1X5;f x = 1, 2, 3, 4, 5
4 78 0; elsewhere
236 Find:
6
(i) P{X=lor4}
5. (a) Apply modified Euler's method to compute the
solution for the following initial value problem, (ii) P H< X s 5}
choosing h = 0 . 25 .
8. (a] X is normally distributed and the mean of X is
dy
dx = cos Z x + sin 3 x, 0 :::;x :::; 1, y (0) = 1 12 and standard deviation is 4. Find out the
probability of the following:
[b] Apply Runge-Kutta fourth order method
(i) X ~ 20
to solve the following IVP with step size
[ii] X s 20 and
h = 0·1:
(iii) 0 s X s 12
_dy = -y - y2
-, 1:::; x:::; 2, y (1) = 1
dx X X2 (b) Find the value of k if a continuous random
6. (a) Find the value of y for x = 0·1 by using variable X has a probability density function
Picard's method upto third approximation. f ex) = kx - 1, 0 $ x $ 1. Also find a and b
Given that: such that:
dy X2 .• P (X $ a) = P (X > a) •
-d
x
= y 2 + l'y (0) =0
(b) Use Taylor series method to find the value of
y (0 . 2) for the differential equation:
-dy = -xy
, 2
, y (0) = 2 .100
dx TMA-303
K-91
K-91
Roll No.
..
TBT-301
B. Tech. (Biotechnology) (Third Semester)
CELL BIOLOGY
Section A (Part I and 11) ~d Section B.
briefly in not more than SO words. Each
question q~rries 2 marks.
(Part 11).Each question carries 6 marks. '"
Section=A
Part-I 2 each
1. Attempt all questions briefly in not more than SO
words:
[i] With reference to- neuron, explain "resting
potential".
[ii] Explain the role of K+ channel in generating a
potential difference in neurons.
K-107 P. T.O.
I
11
TBT-301 [ 3) TBT~301
[ 2)
(iii) Comment on method for celUractionation. Section-B 14 (7.•+ 7) each
(iv) Explain the structure of intermediate filaments Note: Attempt any four questions.
and comment on its functions. 3. (a) With the help of a labelled diagram, explain the
(v) Briefly describe the structural components of detailed structure and protein components of a
ribosomes. "sarcomere" in muscle cell.
(vi) Lysosomes have enzymes that degrade the (b) Discuss the "viral on eogenes" and their
proteins and other junk from cells. Explain
functions in detail.
with reason as to why these enzymes don't
digest the cells during their formation and 4. (a] Discuss any molecular mechanism involved in
. transport. plant cell differentiation .
(vii) Comment on "oncogenes". (b] Discuss the general organization and structure
(viii) Draw a well labelled structure of ATP and of a neuron and how this organization helps it
briefly describe why "it is considered as an in conducting a nerve impulse.
energy currency of cell. 5. (a] Discuss iri detail the need and functioning of
(ix) Discuss briefly the role of integrin protein. "cdk" proteins in cell cycle.
(x) Comment on the process of proton (H+)
(b) Discuss the major check points involved in cell
gradient generation in mitochondria.
cycle and how they function.
Part-e-ll 6 each
6. Ca) Discuss the molecular details of Adhering type
2. Write short notes on any four of the following:
cell junctions.
Ca) Tumor Suppressor genes
Cb) Discuss in detail the role of microtubules in
Cb) Cell differentiation in plant cells
cell division cycle.
(c) Synaptic transmission
7. (a) Draw chemical structure of any three
(d) Regulation of muscle contraction
phospholipids and discuss how phospholipids
Ce) Different types of muscles
help in organization of plasma membrane.
Cf)' Golgi Complex
K-107 P. T.O.
K-107
[4 ] TBT-301
Cb) Discuss in detail the different type of "

transports that occur in plasma membrane.
8. (a) Discuss in detail the "NO" mediated signa ling

cascade.
[b] With the help of suitable diagram, discuss

different interactions that keep in plasma
membrane intact.
TBT-301
.'30
K-107
•
TME-303
B. Tech. (M. E.!AME) (Third Semester)
End Semester EXAMINATION, 2014
MECHANICS OF MATERIALS
Note: (i) This question paper contains five questions
with alternative choice.
(ii) All questions are compulsory.
(iii) Each question carries four Parts (a), (b),
(c) and (d). Attempt either Parts (a) and
(b) or Parts (c) and (d) of each question.
(iv) Each Part carries ten marks. Total marks
assigned to each question are twenty.
1. (a) Sketch stress-strain diagram for ductile e.
material and explain its salient features.

(b) It is required to punch 20 mm diameter hole
in a 15 mm thick steel plate. Presuming
that utlimate shear stress of mild steel is
350 MPa, make calculations for the force
required to punch the hole and the
compressive stress on the punch.
V-14
• P. T. o.
------- ---- ---
[2] TM,E~.03 [3] TME-303

...
Or Or
(C) Explain the following terms : (c) What is Mohr's circle and its significance?
(i) Hooke's law Explain the construction of Mohr's circle
(ii) Principle of superposition and its utility (General Case) indicating clearly how you
(iii) Lateral strain will find out principal stresses and maximum
shear stress.
(iv) Thermal stresses '
(d) A plane element is subjected to following
(d) A reinforced concrete column is 400 mm x
400 mm and is provided with 8 bars of
stresses, O'x = 120 MPa (tensile), O'y = 40
22 mm diameter. Find the safe axial load on MPa (compressive) and Txy = 50· MPa,
the column if the maximum stress in the
clockwise on a plane perpendicular to x-axis.
concrete is limited to 4 MPa.
Find:
Take E, = 18Ec'
(i) Principal stresses and their directions
2. (a) Set up a relation for volumetric strain of a (ii) Maximum shear stress and its direction
rectangular or cylindrical bar subjected to a
3. (a) Differentiate between thin and thick
axial force in terms of longitudinal strain and
cylinders.
Poisson's ratio.
(b) A built up cylindrical shell of 300 mm
(b) A 6 em x 4 em x 3 em block carries normal diameter, 3 m long and 6 mm thick is
axial loads as follows: subjected to an internal pressure of 2 MPa.
(i) 120 k:N(tension) on 4 em x 3 ern face Calculate the change in length, diameter and
(ii) 240 k:N (compressive) on 4 em x 6 em volume of the cylinder under that pressure if .
face the efficiencies of longitudinal and

circumferential joints and 80% and 50%
(iii) 180 k:N(tension) on 6 em x 3 ern face.
respectively. Take E = 200 GPa and m = 3.5.
5
If Poisson's ratio J..l = 0.3 and E = 2 x 10 Or
MPa, evaluate the strains in the three (c) Derive Lami's equation for finding hoop and
directions and hence the change in volume, radial stresses in thick cylinders. •
V-14 V-14
~
TME-303
l5]
[4] TME-303
A torque of 1 kN-m is applied to a 40 mrn
(d) Find the thickness of metal necessary for a (b) diametyr rod of 3 m length rod. Determine
steel cylindrical shell of internal diameter the maximum shearing stress induced and the
150 mm to withstand an internal pressure of twist produced. Take G = 80 GPa.
50 MPa. The maximum hoop stress in the
Or
section is not to exceed 150 MPa.
(c) Determine deflection and slope at the free
4. (a) Draw the shear force and bending moment
end of a cantilever beam with uniformly
diagrams for a simply supported beam
distributed load 'w' on the whole span of
carrying a udl of 'w' per unit length over the
entire span of length 'l'. Also find out the length '1'.
maximum bending moment. (d) A beam with a span of 6 m carries a point
load of 40 kN at 4 m from the left support. If,
(b) A horizontal cantilever 5 m long carries a 6 4
point load of 1 kN at the free and a udl of for the section 1 = 73. 3 x 10- m and
E = 200 GPa. Find the deflection under the
0.5 kN/m over a length of 3 m from the free
end. Draw the shear force and bending load.
moment diagrams. Also find the maximum
shear force and maximum bending moment.
Or
(c) Derive the relation between bending moment
and radius of curvature of the beam under
pure bending.
(d) A rectangular beam of 200 mm in width and
400 mm in depth is simply supported over a •
span of 4' m and carries a distributed load of
10 kN/m. Determine the maximum bending
stress in the beam. 300
5. (a) Derivetorsion equation for shafts. TME-303

..
V-14
V-14
-"", ~-
•
Roll No.
TME-302
B. Tech. (ME/ AME) (Third Semester)
,MATERIAL SCIENCE AND METALLURGY
Time: Three Hours] <, [Maximum Marks: 100
1. (a) Draw CCT diagram and explain.
(b) Copper has a FCC structure. Its atomic
radius is 1.278A *. Calculate its density.
Atomic weight is 63.5. Avogadro's No. is
6.02 x 1023 •
..
Or
(c) Draw Fe-Fe3C equilibrium diagram and
indicate all information related to it.
(d) Metallic iron changes from BCC to FCC at
910*C. At this temperature- the atomic radii
,V-14
. P.T.O .
•
[2 ] Trv,E-302 [3 ]
of iron atom in the two structure are 0.1258 (d) A hardened steel ball of dia. 10 mm is used
nm and 0.1292 nm respectively. Calculate to indent a steel specimen in Brinells'
the volume change in percentage during this hardness test. Dia. of indentation measured
structural change. by an optical microscope of magnification
lOx is observed to be 32.5 mm and load
2. (a) List out the total mechanical properties and
applied is 3000 kgf. Calculate Brinell
describe in brief: Toughness and .Strength of
hardness number of the steel specimen.
materials.
(b). How much proeutectoid ferrite is there in a 4. (a) Explain Ficks' laws of diffusion.
slowly cooled 0.6% carbon steel ? How (b) Draw TTT diagram and explain in brief.
much eutectoid ferrite is there in the same Or
steel? (c) Derive expression for packing factor for
Or (HCP) structure.
(C) What are different heat treatment processes ? (d) Explain different steps of ductile fracture
Describe a heat treatment process undertaken with sketches.
to soften a hard steel to make it machinable.
5. (a) Draw stress and strain diagram for mild steel
(d) What is invariant reaction ? Write the and cast iron.
invariant reaction at phase diagram having (b) Classify steels and mention the composition
(i) Peritectic point (ii) Eutectic point and plane carbon steels.
(Hi) Eutectoid point. '
Or
3. (a) Describe with sketch Jominy End Quench (c) What are different types of Crystal
Test. imperfection? Explain in brief.
(b) . Write in brief about the following: (d) .Define the following:
(i) Carburising (i) Gibbs' phase rule
(ii) Nitriding (ii) Lever rule
(iii) Induction Hardening (iii) Hume Rothery's rule for solid solution
Or
(c) Classify corrosion and what are the methods
of corrosion prevention? TME-302 300
V-14 V-14
.aen No.
, L--L~L-J-~ __ ~~~
TEC-304
\ B. Tech. (ECE) (Third Semester)
NETWORK AND SYSTEMS
Time: Three Hours], [ Maximum Marks: 100
with alternative.choice.
assigned to each question are twenty. .•
1. (a) State Thevenin, Norton and Superposition
theorems. Find the current through the
capacitor of' (-5 j) n reactance in the
following figure using superposition theorem :
( 50. -5jo.
30. •
100 LOoy, ,....., 50. t )10 L300A
4jo.
Fig. r
V-38 P.T.O.
[3] TEC-304
[2] TEC-304 Or
(c) Explain Nodal analysis with proper example.
(b) (i) Obtain the Norton equivalent circuit
Find the mesh currents in the following
across the terminals a-b for the
circuit:
following network:
Iii 0a
4jn
Ion
4L45°Al t
'" I 25 L900V
i I lob IV In
Fig. 4
Fig. 2
(ii) Obtain Thevenin
. equivalent circuit
(d) State maximum power transfer theorem. Also
prove the condition for maximum power
transfer in A. C. circuits.
across the terminals x-y :
2. (a) Explain the following terms with respect to
network graph:
5jO 30 -5jO (i) Tree
20
(ii) Node
r
(iii) Oriented Graph
40 (iv) Degree of a node
r
'" .50 L900 V ~(v) Path
100 LO° VI '"
6jO
, (vi) Links
(vii) Graph
(viii) Fundamental loop
(ix) Branch
(x) Cut-set
V-38 P. T.O.
Fig. 3
V-38
•
[4] ,TEC-304 [5] TEC-304
(b) Write the fundamental loop matrix, cut set (d) Explain Isomorphic Graphs. Draw possible
matrix, incidence and reduced incidence isomorphic graph for the following network:
matrix for the following network:
In
Fig. 7
Also write the complete and reduced
incidence matrix for the graph.
Fig. 5
3. (a) Derive the condition of reciprocity and
Or
symmetry in terms of all 2-port network
(c) For the following network find the number of •
parameters.
possible trees. Also draw all the possible tree
(b) For the network shown in figure, calculate Z,
and co-trees for the following network:
Y, T, T', hand g parameters.
I
~R3
l
\
I! In 2n
I
Rl~ R2~
t
I
I
I
ill I 12
r
R4 Rs / IiI
'''vt! $3n I v2
'
Rt;
Fig. 6 Fig. 8
V-38 V-38 P.T.O.

" •
[6] TEC-304
Or (7) TEC-304
(c) What is the significance of term 'Hybrid' in
h-parameters ? Show that when 2-port (ii) Find current i (t) in the following figure
n1wNl and N2 are connected in parallel, the assuming zero initial responses :
equivalent Y-parameters of the combined
nlw is the sum of Y-parameters of each i (t)
individual 2-port nlw.
(d) Derive Z-parameter in terms of all other t=O
network parameters. •
t'
4. (a) Derive the expression for the following

responses:
o (t) lQ
4H
(i) Step current response of RC parallel
circuit.
(ii) Impulse voltage response of series RL
circuit. Fig. 10
(b) (i) Find current i (t) in the following figure, Or
switching at t = O. Assume initial charge (c) (i) Explain the terms transient response and
on capacitor 25 J.l Coulombs: forced response.
K i (t) (ii) In S-Domain a function is given by:
F (s) = 5 s2 + 2 s - lis (s2 + 2 s + 5)

"
t
ltl V] + Find f (t) for the above function.

5 J..lF
+ (d) (i) Obtain the step voltage response for
series RLC circuit.
Fig. 9 (ii) In the figure shown below, the battery
voltage is applied for a steady state
V-38
V-38 P.T.O.
~
>',
[8]
period. Obtain the complete expressio [9] TEC-304
for the current after closing the switch. and voltage transfer function for the
i<. following network:
2n
RJ = 1 n R2=2n <~
II 12
In In
E= tOV L=lH
1
VII 2'n
)" In Iv'
---0
Fig. II
Fig. 12
) . 5. (a) An impedance fimction is given by: (d) Explain poles and zeros of a network
function. Synthesize the following network
Z(s) = (s + i){s + 4)/s(s + 2){s + 5)
in Foster I and Cauer I form :
Find the RC representation of Foster-I and II Z ( s) = s (s2 + 4) (s2 + 16)/ (s2 + 9) (S2 + 25)
and Cauer I and IT forms.
(b) What is Hurwitz polynomial ? Write the

properties of Hurwitz polynomial. Check
whether the given polynomial is Hurwitz or
not:
p ( s) = s4 + s3 + 2 S2 + 4 s + 1
. -'
Or
r
(c) Define all the transfer functions of 2-port

network. Find the current transfer function
TEC-304 150
V-38
V-38
~
)
Roll No.
t L--L__ ~~ __ ~~ __ ~~
\ TEC-303
ELECTRONICS MEASUREMENT AND
INSTRUMENTATION
Time: Three Hours] ,[ Maximum Marks: 100
(c)
. and (d). Attempt either Parts (a) and
(

(iv) Each Part carries ten marks, Total marks
assigned to each question are twenty .
.~. (a) Explain the classification of error by giving

suitable example. Discuss the means adopted
to minimize these errors.
(b) What do you mean by accuracy and
precision ? The expected values of the
voltage across a resistor is 120.5 V. However
the measurement gives a value of 119.
Calculate (i) absolute error (ii) percentage
V47 I P.T.C.
~
[2] TEC-303
[3] TEC-303
error (iii) relative accuracy (iv) percentage of is exerted through two phosphorous bronze
accuracy. springs. Allowing a maximum stress of
Or
65 MN/m2 and taking the, value of modulus
(c) Explain the statistical analysis of the
measuring instrument with the help of its of elasticity as 112.8GN/m2, calculate
various parameters. A set of independent suitable dimensions for control springs. The 1
current measurements was taken 15y five width of spring strip is 1 mm.
observers and recorded as 12.8 mA, 12.2
Or
mA, 12.5 mA, 13.1 mA and 12.4 mA.
(c) Describe the circuit diagram of a series type
Calculate:
ohmmeter. Write down its design equations.
(i) Arithmetic mean
(d) Design ~a series type ohmmeter. The
(ii) Deviation from the mean
movement to be used requires 0.5 mA for full
(iii) Average deviation scale deflection and has an internal resistance
(iv) Standard deviation of 50 Q. The internal battery has a voltage
(d) Write short notes on transducers given below of 3 V. The desired value of half scale
and classify between active arid passive: resistance is 3000 n.
(i) Inductive Calculate:
(ii) Capacitive (i) The values of series and parallel
(iii) Thermo-electric resistances Rl and R2.
(iv) Piezoelectric (ii) The range of values of R2, if the battery
(v) /Photoele-ctric voltage may vary from 2.7 V to 3.1 V.
Use the value of Rj calculated in (i).
2. (a) Describe the various operating forces needed
J
for proper operation of an analog indicating 3. (a) Describe in detail the. dual slope method of
instrument. analog to digital (AID) conversion. Give its
(b) Describe , the damping system. The deflecting advantage over single slope ramp type ADC.
.
torque corresponding to deflection of 600 is An analog transducer with 0-10 V input is

able to distinguish a change ~of
1000 x 10-6Nm in an instrument. The control
10m V in its input signal.
V-47 V-47 P.T.O.
[4] TEC-303 [5] TEC-303
-..
Calculate: 4. (a) Explain the working of Hay's bridge and
(i) resolution. Maxwell's bridge. What are the advantages
of Hay's bridge over Maxwell's bridge?
(ii) number of bits of an AID converter so ,
that the digital output has almost the (b) Explain the basic operation of \Vheatstone
same resolution as the transducer. bridge. A Maxwell's capacitance bridge
shown in Fig. is used to measure an unknown
(iii) the quantization error and, , inductance in comparison with capacitance.
(iv) the number of decision levels.
I l The various values at balance R2 = 400 Q;
/
(b) Describe various types ofDAC. What will be (
\ R3 = 600 n; R4 = 1000Q; C = 0.5 J.lF.
the output ofR-2R ladder network type DAC n
l Calculate ., the values of R and L 1. Also
for the digital input 1o 10, if voltage applied
calculate the values of storage (Q) factor of
at every input node is +V.
coil if frequency is 1000 Hz.
Or
b
(c) Describe in detail the working of successiv~ I .
1
approximation ADC with the block diagram.
What is the need of DAC in this type of
ADC ? Explain various steps to find out the
successive approximation ADC output for a
4 bit converter to a 8.217 V input if the
reference is 5 V. a
(d) What do you understand by resolution and

quantization ? An analog transducer with a
0- 10 V input is able to distinguish a change
of 10 mV in its input signal. Calculate it's
resolution. Calculate the number of bits of ail,
I
,
ADC so that the digital output has almost the) d
I
same resolution as the transducer. Calculate
also the quantization error and the number of I ( ,...,)E I
decision levels.
V-47 P.T.O.
V-47
",
[6] , TEC-303 [7] TEC-303
Or (i) Two sinusoidal signals, 90° out of phase

with equal amplitude are applied to the
(c) Explain the digital display units in brief.
horizontal and vertical plates of C.R.O.
Describe in detail the BCD to 7-segment
• (ii) Two sinusoidal signals, 180°' out of
convertor with the help of circuit and code
(d)
"conversion table.
Write short notes on specifications of digital
, phase with equal amplitude are applied
to the horizontal and vertical plates of
c.R.O.
meter given below;
, (d) Explain electrostatic deflection and
(i) Count resolution
" deflection factor of a CRT. An electrically
(ii) Sensitivity deflected CRT has a final anode voltage of
(iii) Accuracy 2000 V and parallel deflecting plates 1.5 em
long and 5 mm apart. If the screen is 50 cm
(iv) Speed
from the centre of deflecting plates, find
(v) Settling time (i) beam speed, (ii) the deflection sensitivity
5. (a) Derive equation for gain in feedback of the tube, and (iii) the deflection factor of
oscillator. Describe the Barkhausen criterion the tube.
for production of oscillations. Classify the
oscillator in terms of frequency range.
. (b) Explain the signal generator and function
generator with block diagram. What is the
basic difference between signal generator and
l«
(c)
function generator?
Or
Describe the different parts of CRT. Also
,
describe an overview of applications of CR0.
Explain which figure is made on the screen
of C.R.O. when. TEC-303 150
':I. ~ •••
V-47
V-47
Roll No.
TEC-302
\
DIGITAL ELECTRONICS
Time: Three Hours] [ Maximum Marks: 100
.', Note: (i) This question paper contains five questions
(Hi) Each question carries four Parts (a), (b),
(iv) ,Each Part carries ten marks. Total marks
1. (a) Perform the following conversion:
(i) (334.45)8 = (?)16
(ii) (A2B. AD)16 = (? )BCD

Perform the arithmetic operations:
(iii) (436)8 + (FD )16 = (?)16
(iv) (231)10 + (BCD)16 = (?)10

(v) (101110h-(lOOI00)2 using 2's
complement
V-32 P. T. O.
[2] Tt=C-302 [3] TEC-302
.(b) Explain the 7 bit Hamming code, using a 4 3. (a) For a MSJK flip-flop. Draw the following:
bit message 1100 Demonstrate how we can (i) Draw the circuit diagram.
secure it from errors using Hamming coding.
(ii) Characteristic table
Or j
(iii) Next state function .
(c) Minimise using K maps realize the function
using NOR gates: (iv) Excitation requirement
(v) Explain how it overcomes race around
F(A, B, C, D, E) = L 2,4, 6, 10, 12, 13, 19, 20
condition.
21,24,26,.27,28 + Llp3, 5, 14, 15, 16, 18, 29 (b) Analyse the circuit of is Fig. 1 below:
(d) Minimise using tabular method and realize /
the function using NAND gates:

F (p, Q, R, S, T) = L 5, 7,'1-0,11,13, 15,19 QA ~ QA QB QB
20,21,13,24,25,26,27,28,29,30,31 T T
2. (a) (i) Realise the expression using NOR gates

I I I I I I eLK
only:
f (A, B, C, D) = (AC + A'0') +
(AB + C')(AC + BD)
(ii) Design a 2 bit Magnitude comparator,
Fig. 1
realise it using Basic gates.
Or
(b) Draw the diagram of a BCD adder. Explain
its working. (c) Realise a JK flip-flop given:
Or (i) SR flip-flop
(c) Design a BCD to 7 segment code converter, (ii) D flip-flop
realise the design using basic gates. \ (Hi) T flip-flop
(d) (i) Using multiplexer design a circuit to', \ . (d) Draw the circuit of a Universal Shift Register
implement the given function: and explain its working.
F ( A,B,C) = L (( 0,3,5, 6, 12, 15) + L q> (1,9,11,13 ))' i I j . 4. (a) Design a synchronous sequential circuit
which is a 3 bit counter, with a control
(ii) Using a 3 line to 8 line Decoder realize a variable X, which counts up the clock pulses
full subtractor. when X is at logic 0 and counts down the
. • i,
!
~
,
I
V-32 P.T.O.
V-32
-- -- - --------- --"-
[4] TEC-302 [5] TEC-302
clock pulses when X is at logic 1. Use T flip- (b) Explain giving relevant values the term
flop. relating to TTL circuits :
(b) Design using JK flip a sequence detector to
(i) Vilmax
detect an overlaping sequence 100.
Or (ii) Vihmin
(c) For the state diagram in Fig. 2 realise the (Hi) V01max
circuit using D flip-flop.
(iv) Vohmin
(v) Iii
,J
(vi) lib
(vii) 101
(viii) loh
(ix) Fan out

(x) Noise Margin
Or
(c) Draw the diagram of a CMOS (i) NOT,
(ii) NOR, (iii) NAND gate and explain its
working.
'-
(d) -Draw the diagram of an ECL gate and
explain its working.
,
Fig. 2
(d) Design an asynchronous sequential circuit
with 2 inputs T and C. The output attains a
value of 1 when T = I and C moves from 1 to
--
O. Otherwise the output is O.
5. (a) Draw the circuit diagram of a TIL NAND
gate and explain its working. TEC-302 150
V-32 V-32
..•
._------------ ---.- --
•
Roll No.
, L-~~ __ ~~ __ ~~~
\
TEC-301
ELECTRONICS DEVICE AND CIRCUITS
",
1. (a) To calculate the probability that a state in the'
conduction band is occupied by an electron
~d calculate the thermal equilibrium
electron concentration in silicon at T = 300
K. (Assume the Fermi energy is .20 eV
below the conduction band. The value of
N, = 1.6 * 1019cm-3•
(b) Draw the energy band diagram for:
(i) N type and P type semiconductor
(ii) Metal semiconductor and insulator
V-39 P. T. O.
"
•
[2] TEC-301 [3 ] TEC-301
Or Or
( C) Two semiconductor materials have exactly (c) The total current in a semiconductor is "
the same properties except that material A constant and is composed of electron drift
has a bandgap energy of 1.1 eV and material ,
current and hole diffusion current. The
B has a bandgap energy of 1.3 eV. Determine
the ratio of n, of material B to that of material electron concentration is constant and lis
A forT= 300 K. equal to 1016 em -3. The hole concentration is
(d) Define mass action law. Derive the given by:
expression for minority carrier co~centrati9n
I
in n-type semiconductor. p(x) = 1015 exp( -xlL )cm-3 (x ~ 0)
2. (a) The hole concentration in Ge at T = 300 K where L = 12 urn. The hole diffusion
varies as :
coefficient is D, = 12 cm2/s and the electron
p (x) = 1015 exp (-x2122.5) cm3
mobility is 900 cm2 N -S, The total current
where x is measured in urn. If the hol~
density is J = 4.5 AI em? .
diffusion coefficient is D, = 48 em 2 Is,
determine the hole diffusion current density Calculate:
function of x. (i) The hole diffusion current density
(b) Calculate Vq,vOJ.'Yo:, and V04 along with versus X.
(ii) The electron current density versus X.
diode current ID •
(iii) The electric field versus x.
Si
(d) Explain centertappedf full wave rectifier.
Also draw the direction of current for
~-5Y\
+15V~
IK lIt positive and negative half of input waveform.
Ge ~ ~
YOI Si Y04 3. (a) Write short notes on the following:
v-. Y03 (i) MOS capacitance
Fig. 1 (ii) Darlington amplifier
V-39 V-39 P.T.O.

[4] TEC-301 [5] 'TEC-301
(b) Calculate Ic and VCE for the given circuit: Or

(c) Explain break down mechanism in p-n
+lOV,
junction diode. Explain Zener diode as shunt
regulator. I
(d) Write short notes on the following:

6K
195 K (i) Cascade amplifier
f
I- ~V (ii) Power amplifier

OIP
5. (a) Explain the condition of oscillatien. Explain
13=49
the RC phase shift sociallator with the help
of circuit diagram.
35K lK (b) Explain series-series feedback amplifier.
Or
(c) Draw the characteristic curve for:
(
(i) Common Emitter

Fig. 2 (ii) JFET
Or (d) (i) When Vas = -12V and gate current is
(c) Explain RC coupled BJT amplifier in detail. 10-6 mA, determine the resistance '.
(d) A negative feedback of f3 == 0.002 is applied between gate. and source of a given
JFET.
to an amplifer of gain 103. Calculate the
Qi) Prove that the transconductance gm of a
change in overall gain of the feedback
JFET is given by :
amplifier if the internal amplifier is subjected
. J
to a gain reduction of 15%. . 2 I
= IVpl
! 4. (a) Explain 1t model for BJT. -- gm "IDS.IDSS
\
(b) Derive the expression

. ; ~ of Ai, Av, Z, and Yo in
terms of h-paramater (small signal analysis)
for Common Emitter NPN transistor.
ECE-301 150
V-39
V-39
Roll No.
TEC-304{EN)
B. Tech. (Third Semester)
End .Semester EXAMINATION, 2014
PULSE AND DIGITAL ELECTRONICS
. (b) or Parts (c) and (d) of each question.
1. (a) State and prove any five properties of
Boolean algebra.
(b) Prove that NAND gate is a universal gate.
Or
(c) Explain Half Adder and Full Adder with the
help of truth table and circuit design.
(d) Determine the minimum and maximum
values of a signed and unsigned 8-bit
number.
V-14 P. T.O.
~
~
[2] TEC-304(EN) [3]

i
2. (a) Explain any five characteristic parameters in (d) Simplify Boolean function Y = minterms (0,
a logic family. 1, 2, 3, 4, 8, 9, 10; 15) using Multiplexer.
(b) Design a RC High Pass Filter and derive its

5. (a) Write a short note on RAM and ROM.
output.
(b) Design a 4-bit self correcting ring counter
Or
with the help of 4 D flip-flops.
(c) Explain any five Operational Amplifier
Or
characteristics.
(d) Design Universal Shift Register using four D (c) Distinguish between combinational and
sequential logic circuits. Write the
flip-flops and explain its working.
characteristic equations for D flip-flop.
3. (a) Explain four-bit magnitude comparator with
(d) Design a 4-bit binary ripple counter ~ith the
the help of circuit diagram.
help of 4 JK flip-flops.
(b) Obtain canonical SOP and POS form for the
expression Y = A + BC. •
Or
(c) Design 8 to I Multiplexer and explain its
working.
(d) Simplify Boolean function Y = minterms (1,
3, 5, 7, 8, 9, 12, 13) using k-map.
4. (a) Design Mod-3 counter using JK flip-flop.

(b) Derive the characteristic table IOf NAND
based SR flip-flop.
Or
(c) Explain Half subtactor and Full subtactor
with the help of truth table and circuit design. TEC-304(EN) 100
V-14
V-14
-,
Roll No.
\ TEC-301 (EN)
B. Tech. (EN) (Third Semester)

SOLID STATE DEVICES
AND CIRCUITS



1. (a) Explain mathematically Hybrid-a equivalent

model for BJT. 10
V-13 P. T.O.
f
•
[2] TEc-301 (EN)
[3] TEC-301(EN)
(b) Determine the DC resistance levels for (b) Determine the collector-emitter voltage and
the diode shown in Fig. 1 below for diode collector current for the voltage divider bias
current. 10 configuration as shown in Fig. 2 below: 10
(i) 2 mA 22V
I"
(ii) 20 mA
io in
39kn 10 J.1F
In (mA) I II 0 v,
1OJ.LF
Vi o---::..j I I I
20
1(3= IDol
3.9kn
2
1--=== I •
ro'"'
0.5 0.8 ) Vn (v)
Fig. 2
Fig. 1 Or
Or (c) Explain the basic construction, drain and

transfer characteristics for n-channel
(c) Define .and draw reverse time characteristics depletion type MOSFET. 10
for p-n junction diode.
(d) Explain tunnel diode with its characteristics

t
10
, (d) Sketch the transfer characteristics
= lOrnA, V p = - 4V.
for an
n-channel depletion-type MOSFET with loss
10
and applications. 10
3. (a) Explain the f3re model for the common
2. (a) Explain various operating points within the
emitter configuration with equivalent circuit
limit of operation of a transistor. 1q
in BIT. 10
V-13 V-13
[4] TEC-301(EN) [5 ] TEC-301 (EN)
(b) The application of 1 mY, 5 kH:t square wave (d) For the following configuration Vn = 12 V
to an amplifier resulted in output waveform and V GSQ = - 2 V, Determine the value of Rs.
is shown in Fig. 3 below: 10 10
16V
(i) Write the F.ourier series expansion for
square-wave up to ninth harmonics.
(ii) Determine the bandwidth of amplifier I\ 91 ill
' 1.8 ill
and calculate lower cut off frequency. 12 V
Vo
50mV 47kn
~: Rs=?
Fig. 4
,
4. (a) Explain voltage-series feedback with proper
2~ diagram and also calculate input impedance
'4 .,
18 J..1s and output impedance. 10
'4 ~I
.~ H
lOa J..1S (b) Explain the advantage of negative feedback
and compare it with positive feedback. 10
Fig. 3
Or
Or
(c) Explain voltage-shunt feedback with proper
(c) Derive the expressions for input and output
diagram and also calculate input impedance
impedances in depletion type MOSFET of \
any configuration. 10 and output impedance. 10 \
,I
V·13 V-13
[6] TE~-301(EN)
(d) For the closed loop system forward path gain

A = 20 and negative feedback gain = 100.
Calculate the overall gain of the system. If
the input impedance without feedback is
10 ill, then calculate input impedance for
voltage series feedback configuration. 10
5. (a) Explain oscillator operation with Barkhausen
criterion. 10
.(b) Determine the expression for resonant
frequency of Wien bridge oscillator. 10
Or
(c) Explain RC phase shift oscillator and
determine its frequency. 10
(d) Explain Collpits oscillator and find resonant
frequency. 10
TEC-30 1(EN) 100
V-13
•
Roll No.
TCS-303
B. Tech. (CSIIT) (Third Semester)
UNIX AND SHELL PROGRAMMING

.assigned to each question are twenty.
1. (a) Discuss the features of UNIX operation

system. 10
(b) (i) What are internal and external
commands? Give examples. 5
(ii) Explain ls-l with example. 5
V-22 P. T. O.
. I
[2] .
,TCS-303 [3] TCS-303
Or Or
(c) Explain the components of UNIX (c) Explain grep command with any five options
architecture with a neat diagram. 10 and give examples for each. 10
(d) Distinguish between hard links and soft (d) (i) Explain the structure of an awk script. 10
links. 10
(ii) Explain line addressing and context
2. (a) Explain the modes of vi editor. 10 addressing with respect to sed.
t ..•
~
(b) Explain the following commands:

4. (a) (i) Explain environment variables with
at, batch, nice, cron. 10
.suitable examples that are used in
" Or UNIX. 5
(c) Explain the mechanism of process creation.
(ii) Write a shell script that accepts a
10
filename, . starting and ending 'line
(d) Explain the syntax of find command and also
numbers as arguments and displays all
write the command line to do the
following: 10 the lines between the given line
numbers. 5
(i) Search for the file sample in the current
directory recursively and removes it. (b) What are , positional parameters and
(ii) Search for the file example in the command line arguments ? Explain the
current directory and assigns execute difference between $ * and $ @ with suitable
permissions to all categories of its users. example. 10
3. (a) What are filters ? Explain cut andtr " .»:" Or

command in detail with options an~ suitab:l~ (c) DiscUss'the significance of various meta-
example. 10 characters used in the shell's wild card set. 10
(b) Write an awk script to compute gross salary
(d) Write a shell script that accepts a list of file
of an employee according to the rule given
names as its arguments, counts and reports
below. If basic salary is < 10000 then HRA =
the occurrences of each word that is present
15% of basic and DA = 45% of basic. If
basic salary is > 10000 then HRA = 25% in the first argument file on other argument
.. , of
basic and DA = 50% of basic. \ 10 files. 10
V-22
V-22 P.T.C.
•
[4] TCS-303
5. (a) Write a note on debugging shell scripts with

set -x. 10
(b) Explain the structure of a Perl script. 10
Or
(c) Explain the string handling functions used in

KORN and BASH shell. - 10
(d) Explain variables used in perl. Write a perl

script to print the message "UNIX and
SHELL PROGRAMMING" 100 times
without using loop. 10
TCS-303 400
V-22
[]]I[[IJ
II No. Paper Code: : TCS 3021
TMC3011
TMI301
END SEMESTER Examination 2014-15
B.Tech (eSE) III {MeA III ( M.sc( IT) III
Data Structure using 'C' language.
Time: Three Hours Maximum Marks: 100
INSTRUCTIONS TO STliDENTS
Note:
(i) This question paper contains five questions with alternative choice .
. (ii) All questions are compulsory.
(iii)Each question carries four parts a, b, c and d. Attempt either parts a and b or attempt parts c
and d of each question. .
(iv)Each part carries ten marks. Total marks assigned to 'each question are twenty.
Ql.
(a) Describe how computer evaluates an expression. Convert following expression tree into •
reverse polish notation. (6+4)
.~ .:
b) Create a dynamic array of size N and then print its alternate elements only. (5+5)
OR
c.
(i) Give two practical applications of graph.
(ii)Give the linked representation of the following graph with node list and edge list.
o
(4+6
d. (i) What is the 'output of the following program?O OR
#include<stdio.h>
void fun(int', int"):
int main() c.
{
(i) What is Dque? What are different types of Dques?
int i==6,j=4;
fun(&i, &j);
printf("%d, %d", i, j); (ii)What is sparse representation of an array? Explain with example'.
(5+5)
return 0;
} d. (i) Show the evaluation of the following postfix expression using stack.
void fun(int *i, int oj) XYZ*+STI-
{ Where X = 2, Y = 3, Z ;::4, S :: 6, T =3
*j = *j··i;
*j = *j'*j; (ii) Write the prefix equivalent of the following expression:
. } (11+ 221 (13/4 * (5 + 6) + 10) * 7/3) (5+5)
(ii) Using function, count total number of-nodes from a singly linked list. Total number of nodes
should be printed in main function. Use separate function for node count and it should not Q4.
return any value. (5+5)
a) What is Huffman's algorithm? Implement it for encoding following data for transmission.
Q2.(a) abcabdadaf. (2+8)
(i) Explain backtracking concept in a Binary search tree without recursion. c) Write the applications of B tree. Draw a B tree of order 4, with foilowing keys
20,10,3,4,11,18,17,35,40,22,23,36,38,41,42. (2+8)
(ii) Explain directory lookup method in relative file organization. (5+5)
OR
b) What is the requirement of balancing of a binary search tree? Draw an AVLtree with following
keys 1,2,3,4,6,7,8,9,10,11,12,5. (3+7)
c • (i) Which data structure you will use for scheduling the landing of various aircrafts in an airport
OR explain? Also explain how you willInsure emergency landing .
2
c) • (ii) Give linked representation offollowing polynomial, 5x3+2x +x-9. (5+5)
(i) Explain chaining of synonyms.
(ii) With an example explain how multi-key file organization is implemented. (5+5) d. What is B+ Tree? Where is it use? Create a B' tree of order 3 with following data
29,19,39,9,24,34,14,4. (2+8)
d. (i) Without using retum, write a function to count total number of nodes in a binary search tree, having
address root. The total number of nodes should be printed in main function. QS.
(ii)What is the difference between recursion and iteration explains? (6+4)
a) Explain the concept of address generation through calculation on key value. Explain various
Q3. hash functions with examples. (2+8)
b) Explain the need of sorting in computer science. Write a C function to sort an array ofN
a) Write a function to create priorityqueue, where insertion is done as per priorityand highest priority elements in ascending order using Merge sort. (10)
element is at front. Every node should have three fields information, priorityand address of next node.
(2+8) OR
b) In following graph what are various reachable nodes from node A , give one possible sequence to
reach them. Also specify which graph traversal algorithm have you chosen to solve this problem. Give
its algorithm also. (6+4)
c. What do mean by hash collision? Explain various hash collisions removal techniques with
examples. (2+8)
d. Explain the need of sorting in computer science. Write a C function to sort an array ofN elements
in ascending order using Quick sort. (10)
Roll No.
TCS-301 .. ""
B. Tech. (CS) (Third Semester)

LOGIC DESIGN

.• ..
, (iv) Each Part carries ten marks. Total marks
\.
1. (a) Explain Excess-3 code, Gray code and ASCII
code with example.
(b) Perform the following subtraction:
\(i) 11101:"'" 10110 using 1's complement
(ii) 11011 - 1001 using 2's complement
V-21 . P. T. o.
---
fj
[2] \ TCS-301 [3] TCS-301
Or Or·
(c) Prove the following identities; (c) Design 2-bit magnitude comparator.
. \
(i) A'B'C' + A'Be' + AB'C' + ABC' = C' (d) Explain universal shift register.
(ii) A'BC + AB'C + ABC' + ABC =
4. (a) Convert a T flip-flop to D flip-flop.
( AB + BC + AC
(d) If a Hamming code received as 1010101, (b) Derive the characteristic equations for S-R
find whether the received code is. correct or and J-K flip-flop.
wrong. If wrong find the error and correct it. Or
2. (a) Implement EX-OR Gate and NAND Gate by
(c) . Draw and explain operation of 3-bit ring
using 2 : 1 Multiplexer.
Counter and Johnson counter.
(b) Implement the following functions using '"
PAL and PLA : <, . (d) Design a synchronous counter for a count \
Fl = l:m(2,3,4) sequence of 1, 2, 5, 7, 1.. .
F2 = l:m'(1,3, 5) 5. (a) Distinguish between Mealy and Moore

.Or model of clocked synchronous sequential
(c) Simplify the following expression using circuit with example. .
Quine McCluskey method: . (b) In a sequential clocked circuit there are two
F(A;B,C,D) =l:m(1,3,4,S,6, 7,9,12,13) +d(2,8) flip-flops whose outputs are A and B and one
(d) What is meant by Race around condition ? input x. The present state doesn't change if
How is it overcome? x = 0 and if x = 1, present state changes from
3. (a)' Implement full adder using 3 to 8 active low 00 to 01, 01 to II, 11 to 10 and 10 to 60.
Decoder. Determine state diagram, state table and
(b) Minimize the logic function : implement the circuit using D flip-flop.
F(A,B,C,D) ~ nM(I,2,3,8,9;lO,I,I,14) Or
(c) What is ASM chart ? Draw the ASM chart

+d(7,15)
for 2-bit up down couiler Which has one
~ Use Karnaugh map. Draw the logic circuit
control line E, if E = 1, it works as up
for the simplified function using NOR gates
only. ' counter and if E = 0, it works as down
V-21 V-21 P.T.O.

r,
• [4] TC~301
counter. When it reaches ·to maximum and

minimum value output becomes 1.
(d) An asynchronous sequential logic circuit is

described by the following excitation and
output function:
/-
y= XIX3 + (XI + X3)y
z=y
(i) Draw the logic diagram of circuit.
(ii) Derive the transition table and output

map.
"
TCS-301 400
V-21
-,.
,
Roll No. L-~~ __ ~~ __ ~-L~
\ TEE-302

ELECTRICAL MEASUREMENTS AND
MEASURING INSTRUMENTS
Note : (i) This question paper contains five questions
(c), and (d). Attempt either Parts (a) and
1. (a) Using example differentiate between:
(i) Accuracy and Precision
(ii) Zero drift, span drift and zonal drift
(b) (i) A pressure indicator showed as 42 bar
on a scale range of 0-50 bar. If the true
value was 41.4 bar, determine:
(1) Static error
V-13 P. T. o.
•
[2] ,TEE-302 [3] TEE-302
(2) Static correction - '2. (a) Explain the working of Moving Iron
(3) Relative static error Instrument.
(b) .(i) The resistance of a PMMC voltmeter is
(ii) The unknown resistance in a Wheat-
11kn. The moving coil has 100 turns
stone bridge is measured by using three
and 'is 40 mm long and 30 mm wide.
known resistances such that: The flux density in the air gap in Q.OS
R _R2R3 .... \" Wb/m2• Determine the deflection
4- . R} produced by 220 V if the spring constant -
is 20xlO-7 Nsm/degree.
where R} =(SO±O.S%)Q,
(ii) For a certain dynamometer type
R2 =(SOO±O.S%)Q, R3 =(440:1:0.5%)0. ammeter .' the mutual inductance M
Determine the <,magnitude of unknown
varies with deflection e as
•.[M=-6cos(9+300)] mfl. Find the
resistance Ra and the limiting error in
percent and in ohms.
deflecting torque produced by a direct
current SO mA corresponding to
Or deflection of 600• Also calculate the
(c) Explain different type of errors in spring constant of the controlling spring.
measurement system. Give example also. Or
(d) Prove that the total reactive power in 3-phase (c) Explain • two-wattmeter method for
. measurement' of power. Explain all cases for
balanced circuit (R-L type load) is - .J3 different power factor and its effect on
times the reading of the .single wattmeter . wattmeter reading.
connected as shown in figure. (d) (i) Two wattmeters connected to measure
the input to a balanced 3-phase circuit
. indicate 2000 W and SOO W
10 ~1 I 0
respectively. Find the power factor of
i
the circuit :
\ '" (1) When both the readings are
positive.
.2 0 ~2 '(
(2) When the latter reading is obtained
after reversing the connections to
13
3 o ) I I o the current coil of the first
instrument.
V-13 V-13
[5] TEE-302
[4] TEE-302 magnetizing MMF is 80 AT and the iron loss

(ii) The self-capacitance of a coil is is 1.1 W. Determine :
measured by a Q-meter. The circuit is (i) Ratio error
set into resonance at 2 MHz and the
(ii) Phase 'angle error
tuning capacitor is as value of 460 pF.
The frequency is now adjusted to 4 MHz 4. (a) Describe the working of Maxwell's
and resonance conditions are obtained Industance-Capacitance Bridge with the help
tile tuning capacitor at 100 pF. Calculate of circuit and phasor diagram.
the value of self-capacitance of the coil.
(b) A bridge consists of the following:
3. (a) Define the following terms: Arm AB : A choke coil having a
(i) Transformation.ratio resistance R, and inductance
(ii) Nominal ratio Lt.
(iii) Turn ratio ArmBC A non-inductive resistance R3.
(iv) Ratio correction factor Arm CD A mica condenser C4 in series

with a non-inductive resistance
(v) Ratio error ,
~.
(vi) Phase angle error
Arm DA : A non-inductive resistance R2.
(b) Draw the phasor diagram of potential
transformer and derive the actual When this bridge fed from a' source of
.transformation (voltage) ratio. 500 Hz, balance is obtained under the
following conditions:
Or
R2 =24100, R3 =7500, C4 = u.35 J.lF,
(c) Describe Ammeter-Voltmeter method for
measurement of resistances in detail. R4 =64.50.
»
(d) A current transformer with a bar primary has The internal resistance of capacitor is 0.4O.
250 turns in its secondary winding. The Calculate the resistance and inductance of the
resistance and reactance of secondary circuits choke coil and name this bridge. The supply
are 1.40 and 1.10' respectively including is connected between a and c and detector is
the transformer winding. When 5A current between b and d.
flows in the secondary winding the
V-13
V-13
L
-- ---
[6] TEE-302
./
Or
(c) Describe Kelvin Double Bridge method for
measurement of low resistance.
(d) Describe single-phase electrodynamometer
type power factor meter.
5. (a) Explain
~.
with
- block
.
diagram the principle-of
working of Ramp "type digital volemter.
(b) (i) Describe Ratio type frequency meter.
<,
(ii) Describe substitution method for
measurement of resistance.
Or
(c) How will you form straight line, circle and
ellipse in Lissajous pattern .? Explain with
. examples. ,
(d) (i) .Describe with diagram the different
parts of a Cathode Ray Tube (CRT).
(ii) Explain the working of Q-meter.
TEE-302 u
V-13
•
Roll No.
TEE-301
\
End Semester EXAMINATlON, 2014
NETWORK THEORY
Note : (i) This question paper contains five questions
1. (a) Prove that the maximum efficiency is 50%
for maximum power transfer condition for
a. c. circuits. 10
(b) Find all node voltages in the circuit given
below: '&-Jl- . 10
.-- •
Fig. 1
P.T.O.
V-13
[2] :rEE-301 [3 ] TEE-301
Or Or
(c) Derive the relationship for steady and (c) What do you mean by positive real
transient responses of d. c. series R-C functions? Define its properties. 10
network and also define ~he time constant by (d) Test if the polynomial: 10
plotting the curve. 10
p(s)=s4 +s3 +5s2 +3s+4
(d) In the circuit of figure, the switch s has been
in position 1 for a long time. At t = 0, the is Hurwitz.
switch is moved to position 2. Find ii. (I) for 3. (a) Explain the behaviour of purely inductive
i--« 10 circuit for d. c. steady state and transient state
te::L.
.
.L 'I..
analysis. 10
(b) Find jhe complete response it. (I) for t > 0 for
SoJ'l.-
'tttH the network shown in figure if iL (0_) =,0 and
v, (t) = 20 V. 10
LI,.
Fig. 2
L:.Sk
2. (a) Define all properties of a complete incidence
matrix. 10
(b) Find current through ZL using Thevenin's Fig. 4
theorem. 10 Or
(c) Write all steps for applying nodal analysis in
a. c. circuits. 10
(d) Determine the ABCD parameters of the
r f;'
network shown in figure. 10
'II.
\
+v: :, -;'~ HV~
- fF ~-
Fig. 3 , Fig. 5
V-13 V-13
---
[4] TEE-301
[5] TEE-301
4. (a) Derive the expression for equivalent 1t
network in terms of Y-parameters for 2-port Or
reciprocal network. 10
(c) Give the statement of superposition theorem
(b) Synthesize a network having impedance
and also write all the steps with proper
function given by: 10 example. 10
Z (s) = 6 s3 + 3 s2 + 3 s + 1 (d) Synthesize the given function in Foster and
- 6s3 +3s
Cauer form : 10
Or
Z(s) _ 2 (s+ 1)(8+3)
(c) Explain fundamental loop matrix or tie-set
matrix with the help of a suitable graph. 10
(s + 2)(s + 6)
(d). Write the fundamental loop matrix and cut-

set matrix of the graph. Write all linearly
independent KVL and KCL equations of the
network. 10
)
=1- I,
I
Fig. 6 I
5. (a) Write ne~essary conditions for transfer
functions. 10
(b) Find f (t) using the pole-zero diagram of the
function given below: 10
F(s) s(s+l)
(s+4)(s2 +4s+8)
TEE-30l
100
V-13
\.
. r
----~--- ~ - --
Roll No.
t ~~~--~~--~~~
\ TIT-301
B. Tech. (IT) (Third Semester)
End Semester EXAMINATION; 2014
MICROPROCESSOR AND ITS APPLICATIONS
Time: Three Hours 1 [ Maximum Marks: 100
.(c) and (d). Attempt either Parts (a) and
1. (a) Explain the following instructions with
respect to 8085 microprocessor. Also /
determine type of addressing modes :
(i) CPI23H
(ii) CC 2060
(iii) POP B
(iv) NOP
(b) If a program in 8085 uses all the JMP and all .
CALL instructions only one time then
V-46 P. T. o.
1 •
[2] \ TIT-301 [3] TIT-301
determine total number of bytes consumed in Or

memory. Also explain all instruction. (c) Design a microprocessor system to interface
Or an 2048 x 8 RAM.
(c) Explain the programming model of 8085 and (d) Write an 8085 assembly language program
explain all flags of 8085 in detail. using minimum number of instructions to
(d) Write an assembly language program to add the 16 bit no. in BC, DE and HL. Store
compare two 8-bit numbers which are stored the 16 bit result in DE pair.
at memory location starting at 2050 and store . 4. (a) Write a program in 8085 which subtract two
larger number at memory location 2090H. BCD numbers where subtrahend is stored in
Also determine total number of bytes memory location 3052 and minuend is stored
consumed in memory.
" in !?emory location 3053H and store the
2. (a) Draw instruction cycle with T states for result in memory location 5060H.
. ,
instruction MOV M. D. (b) Explain the DMA controller 8237 in detail.
(b) List the various machine cycles with its T Or
states. If the clock frequency is 2 MHz, how (c) Write a program in 8085 which adds two 16
much time is required to execute an bit BCD numbers which are stored in'
instruction LHLD 3050 ? memory location starting at 2050 and store
Or the result in memory location starting at
(c) What are the differences between jump 3050H.
instruction and CALL instruction and PUSH (d) Explain addressing modes of 8085 in detail
and POP instruction? with examples.
(d) What are the advantages of subroutine ? 5. (a) Explain all types of pins of 8085
Implement module 16 counter using 8085. microprocessor.
3. (a) Discuss in detail about the operation of 8255 (b) Draw and explain block diagram of 8254
along with its BSR mode. \ (Timer) and explain control word format of
(b) Write a program which determine 2's 8254.
complement of contents of PORT A and Or
display result at PORT B and PORT C using (c) An 8 bit number (A3H) is stored in memory
8255. location 2050H. Write a program which
V-46 V-46 P. T.O.

[4] TIT-301
separate two nibbles OA and 03 and CALL

the subroutine ASCII to convert each nibble
into ASCII hex code and store the results in
memory location 4050H and 4051 H.
(d) Explain Maskable and Non-maskable

interrupts of 8085. What is the need of
8259 ? Draw the block diagram of 8259.
TIT-30t 120
V-46
. Roll No.
TME-304
B. Tech. (ME/AME)(Third Semester)

BASIC THERMODYNAMICS
1. (a) What is a thermodynamic system? Explain
different types of system with example.
(b) A milk chilling unit can remove heat from
the milk at the rate of 41.87 MJ/h. Heat leaks
into the milk from the surroundings at an
average rate of 4.187 MJ/h. Find the time
required for cooling a batch of 500 kg of
milk from 45°C to 5°C. Take the Cp of milk
to be 4.187 kl/kg-K.
V-20 P. T. O.
'f,"
•
[3] TME-304
[2] TME-304
(b) A refrigeration plant for a food store operates
Or
as a reversed Carnot heat engine cycle. The
(c) Distinguish between the terms change of
store is to be maintained at a temperature of
state, path, process, reversible \ process and
5°C and the heat transfer from the store to
cycle with diagram.
the cycle is at the rate of 5 kW. If heat is
(d) If a gas of volume 6000 crrr' and at pressure transferred from the cycle to the atmosphere
of 100 kPa is compressed quasi statically at a temperature of 25°C, calculate the power
according to PV2 = constant until the volume required to drive the plant.
becomes 2000 em", determine the final
Or
pressure and the work transfer.
(c) State and prove Clausius theorem.
2. (a) Define internal energy and show that it is a
(d) Ten grammes of water at 20°C is converted
property of a system>
into Ice at -10°C at constant atmospheric
(b) During one cycle the working fluid in an pressure. Assuming the specific heat of
engine engages in two work interactions : 15 liquid water to remain constant at 4.2 KJ/kg
kJ to the fluid and 44 kJ from the fluid, and and that of ice to be half of this value, and
three heat interactions, two of which are taking the latent heat of fusion of ice at O°C
known: 75 kJ to the fluid and 40 kJ from the to be 335 kJ/kg, calculate the total entropy of
fluid. Evaluate the magnitude and direction the system.
of the third heat transfer. .
4. (a) Derive an expression for the availability in a
Or
closed system with respect to the dead state.
(c) Derive steady flow energy equation. Also
(b) Calculate the decrease in available energy
discuss its application.
when 25 kg of water at 95°C mix with 35 kg
(d) A blower handles I kg/s of air at 20°C and
of water at 35°C, the pressure is being at
consumes a power of 15 kW. The inlet and
constant and the temperature of the
outlet velocities of air are 100 m/s and 150
surrounding being 15°C. Take C, of water
m/s respectively. Find the exit air
= 4.2 kJ/kg-K.
temperature, assuming adiabatic conditions.
Or
Take c, of air is 1.005 kJ/kg-K. •
(c) What is quality of steam ? Explain any
3. (a) Draw P-V and T-S diagram ofa Carnot cycle
method to measure it.
and derive an expression for its efficiency. .
. V-20 P.T.O.
V-20
[4] TME-304
(d) In a throttling calorimeter, the steam is

admitted at a pressure of lObar. If it is
discharge at atmospheric pressure and 110°C
after throttling, determine the dryness friction
of steam.
5. (a) Derive Maxwell relations. Why are they

important in thermodynamics? .:
(b) What are the differences between real and
ideal gases ? Show that for an ideal gas,
Cp -C v =R.
Or
(c) Show that internal energy is a function of
temperature only.
(d). From an experimental determination the
specific heat ratio for acetylene (~H2) IS
found to 1.26. Find the two specific heats.
TME-304 300
V-20
..•
-
Roll No.
TME-305
B. Tech. (ME/AME) (Third Semester)

MANUFACTURING PROCESSES-I
(ii) All questions are compulsory .
.(iii) Each question carries four Parts (a), (b),
1. (a) Explain the importance of manufacturing and
give the classification of manufacturing
processes.
(b) Give the classification of rolling processes
with suitable diagram and explain it.
Or
(c) What is ring rolling ? Explain with neat
sketch.
(d) Why is manufacturing called 'Value adding
processes" ? Write a note on economic and
V-20 P. T. o.
.{
\
• I
[2] l'ME-305 [3]
technological considerations in manu- ..-,(b) What are the advantages and limitations of
facturing. powder metallurgy components ? Briefly
\ describe anyone method for production of
2. (a) Derive an expression for sliding friction in metal powders.
the forging process.
Or
(b) Explain working with neat labelled diagram (c) Explain any three types of patterns ~ith neat
of blanking operation perform on sheet labelled diagram. What are the different
metals and note the difference between --allowances considered at the time of pattern
blanking and punching operation. designing?
Or (d) What are the basic steps in Powder
(c) Give the classification of forging processes Metallurgy? Explain in brief.
and explain what the forging defects. 5.
/
(a) Write short notes on the following:

\
(d) Explain working with neat labelled diagram (i) Spting back effect in bending operation
of progressive die and note the difference
(ii) Material flow lines in forging
between compound and progressive die.
(b) Write short notes on the following:
3. (a) What are the different types of extrusion (i) Importance of the Jigs and fixture
processes ? Explain indirect extrusion
(ii) Compacting of powder in powder
processes with neat labelled diagram.
metallurgy
(b) Define jigs and fixtures. Explain any two
- Or
types of jigs and two types of fixtures.
(c) Write short notes on the following:
Or
(i) Planetary rolling mill
(c) Explain working with neat labelled diagram
(ii) Different types of drilling bush
of injection molding for plastics materials
and explain applications of extrusion of (d) Write short notes on the following:
,
plastics are materials ..' (i) . Defects in the rolling.
(d) Explain the principles of location and write (ii) -Importance of Risers in sand casting
short notes on any three locaters.
4. (a) Explain basic principles and terminology of
sand casting processes. TME-305 300
V-20 V-20
Roll No.
MSC-320
M. Sc. (Biotechnology) (Third Semester)

•
GENOMICS PROTEOMICS AND
TRANSCRIPTOMICS

Note r (i) This question paper contains five questions
I. (a) How next generation DNA sequencing is

different' from conventional method of DNA
sequencing?
I
(b) Write down the principle and methodology

of 454 pyrosequencing.
V-10 . P. T. o.
·.~J";~t}~1
~
.•Q:".
':;101.~~
•
[2] MSC-320 [3 ]
Or 4. (a) What are the two approaches of function

(c) Differentiate between emulsion peR and genomics?
bridge peR. (b) What do you understand by Random
(d) What is the principle and methodology of Mutagenesis and its applications?
Solexa platform of DNA sequencing? Or
2. (a) What is the repetitive DNA in the genome? (c) What is Transcriptomics and how is it
What are its applications? studied?
(b) What do you understand by Molecular (d) What is Antisense Technology? How is it
markers and their applications in life beneficial in genomic research?
science? . 5. (a) What is PClc ? What are its applications in
Or genomics?
(c) Write short notes on the following: (b) What is Proteomics ? Write down anyone
(i) RAPD method to analyze it.
(ii) RFLP Or
(d) What are the differences between (c) What is the principle and methodology of2D
Minisatellite and Microsatellite elements of SDS-PAGE?
the genome? (d) Write down the cloning and screening
3. (a) Why Yeast is apreferred model in genomic strategy for Yeast Artificial Chromosome
research? vector.
(b) How differential gene expression could be
studied using Microarray ? Enumerate with
suitable example.
Or
(c) What are the basis and application of Yeast 2
Hybrid assay?
(d) What are knockout mice and how are they
MSC-320
40
produced?
V-10 ,V-10 •
Roll No.
MSC-330

ENVIRONMENTAL BIOTECHNOLOGY

Note:, (i) This question paper contains five questions
1. (a) Comment on Integrated Pest Management.

(b) • Make a note on Solid Waste Processing.
Or
(c) What are the principle and stages of ETA?
(d) Comment on Microbe assisted
Phytoremediation.
V-10 P. T. O.
[2 ] MSC-330 [3]
2. (a) What is anaerobic sludge digestion? Explain Or

the various stages of anaerobic sludge (c) Explain Biostimulation and bioaugmentation.
digestion.
(d) What is pollution ? Elaborate on ozone
(b) Discuss the need and scope of depletion.
bioremediation.
5. (a) Write a detailed account on biodegradation
Or
of hydrocarbons.
"
(c) Give an account on design of bioreactor.
(b) Explain the principle and working of Photo
Briefly explain the types ofbioreactors. bioreactor and Air Lift Reactor.
(d) Discuss the different methods for Or
measurement of air pollution.
(c) Comment on the following:
"
3. (a) Explain the following: (i) Lyophilization
(i) Greenhouse effect (ii) Oxidation Pools
(ii) Vermicomposting
. (d) Discuss the characteristics of waste water.
(b) What do you understand by a wasteland ? Explain the Rotary Biological Contractors
Elaborate on the strategies for the restoration used in the treatment of waste water.
of degraded wasteland.
Or
(c) Write short notes on the following:
(i) Biosorption
(ii) Biopesticides
(d) Elaborate on the different stages of
downstream processing.
4. (a) Discuss the treatment, scheme for antibiot,ic
industry and tannery waste water.
(b) Write in detail about the activated sludge
process (use diagrammatic representation). .MSC-330
40
V-10 V-10
I
Roll No.
MSC-340

BIOINFORMA TICS
Time: Three Hours] [ Maximum Marks: j 00

•
1. (a) Elaborate reading frames present in a double
stranded DNA and name one software that
can find hidden genes in user input
nucleotide sequence.
(b) What do you understand by ENA ? Also give
a detailed account of EMBL and its research
laboratories. Which lab of EMBL is
dedicated for bioinformatics ?
v-1b P. T. o.
[2 ] MSC-340 [3 ] MSC-340
Or (b) Elaborate various algorithms for global and

(c) Elaborate the working of BLAST and its local sequence alignment.
various applications in analysis of biological Or
data. (c) Write a short note on PIR and PDB databases
(d) What do you understand by phylogenetic and state their importance from research
analysis ? Also highlight the importance of point of view.
phylogenetic analysis. (d) What are the various distances based and
character based methods of phylogenetic tree
2. (a) Elaborate dynamic programming as an
construction?
effective method for finding optimum
alignment between sequences. 4. (a) What are the various levels of protein
structure ? What are the constraints in
(b) As an application tool how can pri~er
predicting 3-D structure of proteins from
designing be performed with. freely available primary amino acid sequence?
bioinformatics resources.
(b) Throw light on various tools for molecular
Or mapping. Also state' the importance of
molecular mapping for analysis of molecules?
(c) What do you understand by
.
structural
databases ? Give examples and state their Or
importance for research. (c) Explain operating system used in computer.
. How many operating systems you have used
(d) What do you understand by molecular
imaging and its design ? Elaborate its usage in computers and also give their main
features?
in biological data.
(d) Differentiate between genetic and physical
3. (a) What do you understand by motifs, domains, maps. What information do you think these
loops, bends and turns in proteins ~hat maps can yield for scientific research and
provide a final stable 3D structure? Name studies?
one Indian software for protein structure
5. (a) Throw light on European Molecular Biology
prediction. Network (EMBNet). How is it helping the
V-10 V-10 P. T. O.
·"~":~I~·~
.-:« 1 S~.-,'$
•
[4 ] MSC-340
scientific community in research data

dissemination?
(b) Describe comparative genomics. What are
the applications of comparative' genomics
and how it can help in biological analysis ?
Or
(c) Describe various algorithms for secondary
structure determination of proteins. Also
elaborate various methods of 3-D structure
generation of protein like homology and ab-
initio methods.
(d) Describe various criteria for designing
primers. Also mention a bioinformatics tool
for primer designing and the web site hosting
that tool.
40
MSC-340
V-10
Roll No.
TPE-301
B. Tech. (Petroleum Engg.)
(Third Semester)
THERMODYNAMICS
(v) Draw neat and labelled diagrams as
necessary. Make suitable assumptions
where required.
t:" (a) Derive an expression for work done in an
isothermal process.
(b) A steel casting weighing 4 kg has an initial
temperature of 500°C. 40 kg of water
initially at 25°C is contained in perfectly
V-39 P. T. o.
•
[2 ] ,TPE-301 [3] TPE-301
insulated steel tank weighing 5 kg. The (d) 10 kg of water at 375 K is mixed
casting is immersed in the water and the adiabatically with 30 kg of water at 275 K.
system is allowed to come to, equilibrium. Calculate the change in entropy of the
Calculate the final temperature. Ignore the
effects of expansion or contraction and
system. (For water Cp = 4.18kJ/kg K and can
assume constant specific heats of be assumed to be constant for the given range
4.18 kJ/kg K for water and 0.50 kJ/kg-K for. of temperatures).
steel.
3. (a) Givethe differences between ideal and real
Or
gases. Explain the van der Waals equation of
(c) Derive an expression for work done in a
state.
polytropic process.
(d) A tank containing 20 kg of water at 20°C is (b) Using tile Clausius Clapeyron equation
fitted with a stirrer that delivers work to the determine the boiling point of water at a
water at the rate of 0.5 kW. Calculate the pressure' of 2 atm given that the boiling point
time taken for the temperature of the water to at 1 atm is 100°C and the enthalpy of
rise by 10°C if no heat is lost from the water. vaporization is 2257 kJ/kg.
(For water CPo= 4.18 kJ/kg).
Or
2. (a) Explain with the aid of neat sketches, the two •
(c) What is meant by compressibility factor?
statements of the second law of
Explain the virial equation of state.
thermodynamics.
(d) Calculate the saturation temperature of water
(b) 20 kg of water at 375 K is mixed
adiabatically with 30 kg of water at 275 K. at a pressure of 2 atm using the Antoine
Calculate the change in entropy, of the equation -given A = 16.262, B = 3799.89,
system. (For water Cp = 4.18 kl/kg-K and C = 226.35.
can assumed to be constant for ,the given 4. (a): Show that for a one component system in
range of temperatures).
equilibrium in two phases the Gibbs free
Or
energy in the same in each phase.
(c) Explain the Carnot cycle with a neat sketch
and derive an expression for the efficiency of (b) Draw anyone phase diagram (either-Psx-y or
the same. T-x-y) for immiscible binary system.
V-39
V-39 P. T.O.
•
[4] TPE-301
Or
(C) Explain in detail, the concept of reaction
coordinate.
(d) Draw anyone phase diagram (either P-x-y or
T-x-y) ofa partly miscible binary system.
5. (a) Derive an expression for the air 'Standard

efficiency of a diesel cycle.
(b) A refrigeration machine' is operating at a
condenser temperature of 310 K and it needs
1 kW of power p<:<.r, ton of refrigeration.
Determine (i) The COP, (ii) The heat rejected
to the condenser.
Or
(c) Derive an expression for the air standard

efficiency of petrol cycle. ..
(d) Explain the vapor absorption refrigeration
'cycle.
J
"
I
TPE-301 100
V-39
Roll No.
, L-~~ __ ~~ __ ~~~
TPE-302
\
B. Tech. (petroleum Engg.) (Third Semester)
BASIC GEOLOGY
Time: Three Hours] tMaximum Marks: 100
(c) and (d). Attempt either Parts (a) and ,~

1. (a) What is an igneous rock? How are they
tprmed in nature? Discuss. Write the names
of four igneous rocks.
(b) What is texture of an igneous rock? Describe •
the types of textures found in igneous rocks.
Or
(c) What is "parameter" of a crystal face ?
Describe how crystallographic notation is
done by "Index System of Miller."
V-47 P.T.O.
•
[2] TPE-302 [3]
(b) What are the symmetry elements of a crystal ? '(b) Explain the principle of superposition and
Explain. principle of original horizontality.
2. (a) What is eutectic ? Describe the Or

crystallization of magma consisting largely (c) Describe the four important landforms
of two constituents. produced by the river action.
(b) Describe the forms of igneous bodies. , (d) What is denudation ? What are different
Or
)
types of weathering? Discuss.
,I
\
(c) What is Olivine ? Describe structure and
physical properties of Olivine.
5. (a) Explain the lithostratigraphic
Formation, Member and Bed.
...
unit group,
!
(d) what are Nesosilicate, Sorosilicates, (b) Explain correlation of rock unit.
Cyclosilicates and Inosilicates ? Explain and Or
~
give an example of mineral of each group.
(c) Explain (i) a Index fossil, (ii) a Palaeozoic era. ~j
3. (a) Discuss internal structure of earth. (d) What is a rock cycle? Discuss with sketches.
(b) What are continental shelf, continental slope,
abyssal plain and trenchs ?
Or
(c) What is the theory of continental drift ? What
evidences Wegner cited in favour of his
theory? Discuss
(d) What are the different types of plate \ ."

\
boundaries? Explain.
4. (a) What are microfossils ? What is the

importance of microfossil in petroleum
I
. exploration? TPE-302 100 I
V-47 V-47
•
Roll No.
r
'\
TPE-303
FLUID AND PARTICLE MECHANICS
Time: Three Hours] {Maximum Marks: 100
(iv) Each Part carries 'ten marks. Total marks
1. (a) What are the types of fluids? Write concept

of viscosity.
(b) Determine the mass flow rate, mass velocity •
and the volumetric flow rate of the fluid
flowing in a pipe of 40 mm inside
diameter, velocity of the water flowing
through the pipe is 0.5 mls and density of
water 1000 kglm 3.
V-47
P. T.O.
, .
•
[2] .:TPE-303 [3] TPE-303
..... Or Determine the vane angle at the outer

(c) Derive the expression for Bernoulli's periphery of the impe)ler.
equation. Or
(d) Water is flowing a pipe of inside diameter of (c) Explain the working of Venturimeter with
50 mm. The mass flowrate of water is 2 kg/so neat diagram.
Determine the volumetric flowrate and
mass velocity of water. Density of water is (d) An orifice meter is used to .measure the flow
1000 .kg/m'. rate of water flowing in a pipe line of 78 mm
internal diameter. The orifice diameter. is
2. (a) Derive the expression for shear stress 15 mm. Mercury manometer reads 18 ern.
distribution in a cylindrical tube. The volumetric flow rate in this case is
(b) The acetic acid is to be 'pumped at a rate of 3
719 cm ts. Calculate the coefficient of
3
0.02 m Is through a 75 mm internal diameter discharge of the meter.
and pipe is 70 m long (horizontal). What is
4. (a) State and explain Stoke's law. Write
the pressure drop in the pipe?
characteristics of packing's in packed bed.
Or
(b) Find out the critical speed of the ball mill by
(c) What is meant by dimensional analysis and
using the following data :
what are the dimensions less numbers?
(d) Water of density 1000 kg/m" and viscosity Diameter of the ball mill = 430 m, diameter
3 of ball = 30 mm.
0.0005 (N-s)/m2
is pumped at 1000 cm Is
through 30 mm internal diameter pipe. Or
Calculate the value of Reynold's number. (c) What are the characteristics of fluidization
3. (a) Explain types and working of Reciprocating and its applications?
pump. (d) _ A centrifugal pump is used to deliver a liquid
\.
(b) A centrifugal pump is to discharge at the rate of 0.3 m3/s the distance between a
3 liquid level in the reservoir and the suction
0.118 m /s at the speed of 1450 r. p. m.
against a head of 25 m. The impeller pipe is 1.8 m. The vapour pressure of the
diameter is 25 em, the width of impeller is 5 liquid is 50 kN/m2• The pressure on the
ern and manometer efficiency is 75%. liquid surface in the reservoir is 100 kN/m2,
V-47 P.T.O.
-.
[4] TPE-303
the diameter of the pipe is 30 cm and length

of the pipe is 50 m.
Determine net positive suction head of the
pump, density .of liquid = 900 kg/m ',
2
viscosity ofliquid = 0.5 m Ns/m •
5. (a) What is meant by crushing ? Write its

equipments and applications.
(b) What will be the power required to crush
150 tonnes per hour of lime stone if 80% of
the feed passes 50 mm screen and 80% of the
product a 3.125....p1mscreen? Work index of
lime stone =12.74.
.
Or
(c) What is meant by grinding ? Write its
equipments and applications.
(d) Find out the critical speed of the ball mill by
using the following data:
Diameter of the ball mill = 450 m, diameter
of ball = 25 mm.
TPE-303 100
V-47
•
\
Roll No.
·\
TPE-304
GEOMA TICS ENGINEERING
...,
Time: Three Hours] [ Maximum Marks: J 00
1. (a) What are different types of maps and its
uses?
(b) What are different types oflevelling ?
Or
(c) What do you mean by scale of a map? What
are different types of scale and symbols used
in a map?
(d) Explain the method of reiteration by
theodolite.
V-47 P. T.O.
•
[2 ] , TPE-304 [3]
2. (a) Differentiate between the following: (b) Write short notes on the following:
(i) True bearing and magnetic bearing (i) Active and passive system of remote
(ii) Whole circle bearing and quadrant sensing
bearing (ii) Atmospheric window
Or
(b) Closed compass traverse ABCD conducted
(c) Write about classification of image.
in clockwise direction, with the following
Fore bearings of their respective lines: I (d) Explain in detail about Digital image
processing, Rectification and Enhancement.
LineAB 40030', Line BC 700 30'; Line CD
210030'; Line DA 2800 30'. 5. (a) Explain the concept of GIS different uses.
Determine the value of included angles in the (b) What are different data input techniques in
closed compass traverse and the reduced GIS?
bearings of all the lines. Or
Or (c) Explain the following:
(c) What are different types contouring (i) Spatial and non-spatial data
methods? (ii) Vector and raster based data
(d) What are different types of correction applied (d) Write about data manipulation analysis and
in chain and tape measurement? data output
3. (a) What are techniques for photointerpretation ?

(b) What are different types of overlaps in aerial
photogrammetry ?
Or
(c) What are the terms used -in aerial \.
photogrammetry ?
(d) Derive an expression for height displacement.
4. (a) Explain EMR interaction between TPE-304 100

atmosphere and Earth features. •
V-47 V-47
-. -- -- ---------- /:
•
Roll No.
, L--L~~~~ __ ~~~
, TPE-305
EndSemester- EXAMINATION, 2014
STRUCTURAL GEOLOGY
Time: Three Hours] -,, [Maximum Marks: 100
with alternative choice. '
to
(v) Illustrate your answer with neat diagrams,
wherever possible.
1. (a) Describe different types of strain.
(b) A wire of 10 em length has been stretched to
11.5 cm. Find out the extension and quadratic
elongation.
Or
(c) Describe the geological structures that may
develop in the three fields of strain ellipse.
(d) Draw a geological structure where
A) > 1.2 = 1.
V~7 P.T.O.
t •
[2 ] J"PE-305 [3]
2. (a) What are the differences between a transform Or

fault and a strike-slip fault?
(c) Why lineations develop in natural rocks ?
(b) Name an important transform fault giving its Describe giving suitable examples.
location.
Or (d) How boudins can be used to measure
extension (e) in deformed rocks ?
(c) Draw five contour lines of different
elevations and a horizonfal bed. Describe the 5. (a) Describe the dip isogon classification of
topography based on the contours you have folds.
drawn.
(b) What is the most likely orientation of dip
(d) Find out the true thickness of a bed with the
isogons in incompetent fold layers?
following observations. The traverse was
taken along a horizontal plane. Or
Dip of the bed 250 towards east (c) Describe the genetic classification of joints.
Width of the outcrop = 20 metres
(d) How oil traps can form in an angular
3. (a) Describe the essential components of Plate - unconformity ?
tectonics.
(b) What are the problems, which will be
encountered if a railway line is to be laid
across the Atlantic Ocean ?
Or
(y) Describe the structural evolution of the
Himalayas.
.< Why do Indians call the Himalayas as
I ..'
blessing of the mother nature? \
4. ~1 Describe different types of foliations.
(b) A flexural-slip fold has an interlimb angle of
500• Which foliation is most likely to develop
in the fold limbs 1. TPE-305 100
V-47 V-47
..
- -
Roll No.
TCE-301
B. Tech. (Civil Engg.) (Third Semester)
MECHANICS-,OF FLUIDS

1. (a) Derive the expression for pressure intensity •

inside a soap bubble and water droplet.
(b) . In 1 : 40 model of a spillway, the velocity
and discharge are 2 mls and 2.5 m 3 Is
respectively. Find the corresponding velocity
and discharge in the prototype.
V-6 P.T.O.
~
[2] . TCE-301 [3] TCE-301
Or Or
(c) Describe Rayleigh's method for dimensional (c) Differentiate between Eulerian and
Lagrangian methods of representing fluid
analysis.
flow.
(d) Two large fixed parallel planes are 12 mm
(d) Determine the pressure difference (PA - PH)
apart. The space between the surfaces is
in Fig. 2, shown below.
filled with an oil of viscosity 0.9 Ns/m", A
flat thin plate 0.2 m 2 area moves through the
oil at a velocity of 0.25 m/s. Calculate the
drag force when the thin plate is at a distance
of3.5 mm from one of the plane surfaces.
2. (a) What is a manometer ? With the help of a

neat diagram classify different types of
manometers.
(b) A door in a tank is in the form of a quadrant
of a cylinder of 2 m radius and 3 m width as
shown in Fig. 1. Calculate the resultant force
10.45 m
on the door and its location on the gate.
T0225 m
o
- I
Fig. 2
3. (a) Derive an expression for the discharge over a
rectangular weir with velocity of approach.
(b) The water is flowing through a tapering pipe
having diameters 0.3 m and 0.15 m at
sections 1 and 2 respectively. The discharge
4
Fig. I through the pipe is 0.04 m 3 Is. Section 1 is
V-6
V-6 P. T.O.
'.
•
[4] TeE-30i [5] TCE-301
5 m above the datum and section 2 is 2 m 5. (a) What do you mean by an equivalent pipe?
above the datum. Find the intensity of Derive the expression for the size of art
pressure at section 2 if that at section 1 is equivalent pipe.
30 xl04 N/m2• (b) In a pipe 600 mm diameter and 3000 m

length, provided with a valve at its end, water
Or
is flowing with a - velocity of 2 m/s.:
(c) State the Bernoulli's theorem with its
assumptions and limitations.' Also name Assuming velocity of pressure wave C =
some practical applications of Bernoulli's 1500 mis, find the rise in pressure if the
theorem. valve is closed in 20 seconds.
(d) A rectangular orifice 0.6 m wide and 0.8 m Or
deep is discharging water from a vessel. The
(c) What do you mean by surge tank? Write
top edge of the orifice is 0.4 m below the
water surface in the vessel. Find the down the location and functions of a surge
discharge through the orifice if Cd = 0.62 tank.
and the percentage error if the orifice is (d) A piping system consists of 3 pipes arranged
treated as a small orifice. in series; the lengths of the pipes are 1200 m,
4. (a) What is Stokes law? Derive an expression 750 m and 600 m and ·diameters· 750 mm,
for terminal velocity. 600 mm and 450 mm respectively.
(b) An oil of viscosity 4.25 poise flows in a Transform the system to an equivalent
45 mm diameter pipe with a is charge of 450 mm diameter pipe. Also, determine an
5.25 lit./sec. If the specific gravity of the oil
equivalent diameter for the pipe, 2250 m
is 0.87, state whether the flow is Laminar or
long.
Turbulent.
Or
(c) With the help of a neat diagram differentiate
between hydrodynamically smooth and
rough boundaries. .
(d) Water at the rate of 0.0006 litre/sec. is
flowing through a sandy specimen of 8 em
. height and 45 cm2 cross-sectional area under
a constant head of 7 m. Determine the 300
TeE-30t
coefficient of permeability.
V~
•
V~
Roll No.
TCE-302
B. Tech. (Civil Engineering)(Third Semester)
BASIC SURVEYING
(iii) Each question carries four parts (a), (b),
(c) and (d). Attempt either parts (a) and (b)
or parts (c) and (d) of each question.
(iv) Each part carries ten marks. Total marks
1. (a) What are different methods of linear
measurement of distances between objects on
ground and their relative advantages and
disadvantages ?
(b) A nominal distance of 30 meters was set out
with a 30 metre steel tape from a mark on the
top of one peg to a mark on the top of
another peg. The tape was in catenary under
V-4 P. T. O.
.,
[3 ] TCE-302
[2] TCE-302 was 16 kg. Weight of one cubic ern of steel is

a pull of 10 kg and at a mean temperature of 7.86 gram, weight of 20 meter long tape is
70°F. The top of one peg was 0.25 meter 0.8 kg., Young's Modulus of elasticity E for
below the top of the other peg. The top of steel is 2.109 x 106 kg.Zcm". Coefficient of
higher peg was 460 meters above mean sea thermal expansion of steel tape is 6.2 x 10-6
level. Calculate the exact horizontal distance per 1°F.
between the marks on the two pegs and
2. (a) What is a magnetic compass and for what
reduce it to mean sea level. The tape was
purpose is it used ? What do you understand
standardized at a temperature of 60° F, lying
by local attraction in surveying by magnetic
flat on plane ground, under a pull of 8 kg.
compass?
Take the radius of earth = 6370 km,
(b) The following bearings of lines were
Density of tape = 7.86 gram per cubic em
observed with a compass in an area where
Sectional area of tape = 0.08 sq.cm, local attraction was expected:
Co-efficient of expansion
Line Fore Bearing Back Bearing
of steel = 6 x 10-6 per 1°F
AB 38°30' 219° 15'
Young's modulus of elasticity 100°45' 278030'
BC
CD 25°45' 207° 15'
of tape = 2 x 106 kg/sq. ern.
DE 325° 15' 145015'
Or
Which of the stations are affected by local
(c) Explain in detail the two fundamental
attraction ? Find corrected magnetic bearings
principles of surveying and what is their
purpose. of the lines and true bearing of these lines, if
magnetic declination in the area was 10° W.
(d) A steel tape of 20 metre long, standardized at
55°F with a pull of 10 kg. was used for Or
measuring a base line. Find the corrections (c) What units of angle measurement are used in
per tape length if the temperature at the time surveying ? -What do you understand by
of measurement was 80°F and pull exerted
V4 P.T.c.
V-4
•
[4] TCE·...J02 [5] TCE-302
Angle, Bearing and Azimuth ? Explain the Or

terms Fore Bearing and Back Bearing of a (c) What do you understand by the closing error
line.
in a closed traverse and what conditions
(d) What do you understand by Reduced Bearing should be satisfied to check if closing error is
and Quadrental Bearing of a line ? Explain zero ? What methods are used to adjust the
with diagram how Reduced Bearing and closing error?
Quadrental Bearing and converted to each (d)" A closed traverse was run between five
other. Explain why such a conversion in stations with measurements as follows:
required in surveying and mapping.
Instrument Station Mangetic Length
3. (a) What measurement are required in traverse station Sighted Bearing of Line
surveying? What is "the difference between a
A B 3160 30' 84.5 m
closed traverse and open traverse ? Describe
the procedure of a chain and compass B C 32° 30' 48.1 m
traverse. 750 30' 49.2m
C D
(b) A closed traverse was conducted round an D E 1220 30' 48.2m
obstacle and the following observations were
made. Work out the missing quantities:
" E A 2120 30' 102.8 m
Find the closing error in" the traverse and
Side Length in Metres Azimuth adjust it. Assuming the coordinates of
stations A, as (500 m x 500 m) find out the
AB - 330 45'
coordinates of other stations.
BC 300 86 23'
0
4. (a) What do you understand by leveling in

CD - 169 23'
0
surveying and mapping ? What is a level
DE 450 243 54'
0
surface ? What do you understand by
EA 268 3170 30' 'reciprocal levelling' and under what
circumstances is it used ?
V-4
V-4 P.T.O.
•
[6] TCE-302
[7] TCE-302
(b) The following notes refer to reciprocal levels
taken with one level: was 192.122. Make out a page of level field
book and enter the above readings. Calculate
Staff Staff
Instrument the reduced levels of the points and also the
Reading Reading Remarks
near gradient of the line joining the first and the
onP onQ
last point.
P 1.824 2.748 Distance
PQ = 1010 m 5. (a) Make neat sketches of instruments which are
required for use in plane table survey.
Q 0.928 1.606 R. L. of Explain the use of each of such
P = 126.386 m instruments.
(b) What do you understand by two-point
Find (i) the true R. L. of Q, (ii) the combined
correction for curvature and refraction and problem and three-point problem? For what
(iii) the angular error in the collimation purpose and how are they used ?
adjustment. Or
Or (c) What are the relative advantages and
(c) What do you understand by the term disadvantages of plane table surveying when
'Levelling' and for what purpose it is used?
compared to other methods ? Describe the
What are different methods of levelling ?
use of Tangent Clinometers and Clinopole in
What are different types of levels
plane table survey.
(instruments) and Bench Marks used in
Levelling? (d) What are different methods of plane table
(d) The following consecutive readings were surveying ? What are the uses of telescopic
taken with a level and 3 meter levelling staff alidade and Johnson's head in plane table
on continuously sloping ground at a common surveying and how they are used for making
interval of 20 metres: a contour map?
0.602, 1.234, 1.860, 2.574 (T. P.), 0.238,
0.914, 1.936, 2.872 (T. P.) 0.568, 1.824,
1.722. The reduced level of the first point
TCE-302 220
V-4
V-4
Roll No.
TCE-303
B. Tech. (Civil) (Third Semester)
BUILDING MATERIALS AND CONSTRUCTION
" Note: (i) This question paper contains five questions
with alternative choice ..
(c). and (d). Attempt either Parts (a) and
(iv) Each Part carries ten marks. Total' marks
I. (a) Why has the "frog been provided at top

surface of brick? What are the. characteristics
of good brick? e.
(b) Specific gravity for most of the building

stones lies between which ranges. What are
.' the sizes of fine and coarse aggregates ?
What are the characteristics of good building .
-, stones?
V-3 P.T.O.
"
. - -- -~---~-
~....---r· . -
[2] TCE-303 [3J TCE-303
Or anyone of them briefly. What is the

difference between rubble and ashlar
( C) Describe any two of the following defects in
masonry.
timber:
(i) Shakes Or
(ii) Knots (c) Explain the terms : building height, building
(iii) Rind galls. line, build-up area and floor-area ratio.
(d) What is slaked lime ? Discuss in detail the (d) Explain the following tenus with figures
classification of lime. Kihg closer, Queen closer j: English bond
. and Flemish bond.
2. (a) What are the values of initial and final setting
time of Ordinary Portland Cement (OPC) ? 4. (a) What are the essential requirements of good
What are the Bogue's compounds present in roof? Write the merits and demerits of flat
OPC ? How do they contribute towards roof.
setting and hydration of cement ?
. (b) Define : Tread, rise, stringer, landing. with
(b) Name the different tests of cement. Explain sketches. -
anyone of them.
Or
Or
(c) Carry out geometrical design of a building
(c) What are the superplasticizer and air-
staircase in the space 5.8 x 3.2 m where floor
entraining admixture? Give some examples.
to floor height is 3.8 m. Assume any suitable
(d) Write a brief note on Portland Pozzolana
.data, if required.
Cement (PPC) and quick setting cement.
.1t""I~~,.
(d) Explain damp proof course (Ope) work
3. (a) Name any ten different structural:"
briefly.
components of a building with figure.
5. (a) Write a short note on Polyvinyl Chloride
(b) What are the different classification of
(PVC).
buildings as per Indian standard ? Describe
V-3 P.T.C.
V-3
--------------
•
(41
TCE-303
(b) Explain expansion joint and construction
joint briefly.
Or
(c) What is cavity wall ? What are the

advantages of cavity wall ?
(d) What is plastering ? What are the objects of.

plastering and requirements of good plaster?
/.
../. »:
TCE-303
220
V-3
•
. Roll No.
TCE-304
B. Tech. (Civil Engineering)
(Third Semester)
SlRENGTH OF MATERIALS
Time: Three Hours] -, [Maximum Marks: 100
(b) or Parts (c) and (d) of each question. :0

1. (a) Define direct stress, shear stress and
Poisson's ratio.
(b) Derive' the elongation in a rectangular bar
due to its self weight.
Or
(c) Define Hooke's law and write down the
relations between constants E, G and K.
(d) A concrete cylinder of diameter 300 mm and
length 500 mm when subjected to an axial
V-2 P.T.O.
~
[2 ] TCE-304 [3 ] TCE-304
compressive load of 400 kN resulted in an (d) Draw the shear force diagram and bending
increase of diameter by 0.3 mm and a moment diagram of the beam shown in the
decrease in length of 0.6 mm. Compute the Fig. 4.
value of .Poisson' s ratio. and modulus of
elasticity.
2. (a) Draw the shear force diagram and bending
moment diagram of the beam shown in the 8kN/m
Fig. 1. 10 each ••--------- 3m ••
8kN
a=:=:
1 " . 1::,.
Fig. 4
3. (a) With a suitable example explain Macaulay's
~--- 2 m ~-- 3 m--- •• method.
Fig. 1 (b) For a simply supported beam of length L
(b) Draw the shear force diagram and bending .with load w at mid section, using the double
moment diagram of the beam shown in the , integiatio~ method show that the slope at end
Fig. 2.
8kN .is wi}/l6EI and deflection at mid section is
wL3/48EI .. "I
Al ~B Or
2m (c) For a cantilever beam of length L with load P
Fig. 2 .at free end, using the double integration
Or method show that the slope at free end i$
(c) Drawthe shear force diagram and bending PL2/2EI . and deflection at free end is
moment diagram of the beam shown in the 3
PL /3 EI.
Fig. 3.
2kN/m (d) Assuming load: PI and P2 in' a simply
supported beam at one-third distances from
ends, explain the process of finding slope and
3m
Fig.3 deflection using Macaulay's method.
V-2 V-2 P.T.O.

[4 ] TCE-304,
4. (a) In a torsion test, rod of 25 mm diameter was [5]

twisted 0.04 radian over a length of 400 mm TCE-304
when a shearing stress of 50 MN/m2 was Or
applied. Calculate constant C.:
(c) Calculate the increase in volume of a
(b) A steel rod of 25 m long is at atemperature
spherical shell 4 m in length 60 em in
of 35° C. If the temperature is raised to 85°C,
diameter and 18 mrn thick When it is
determine the free expansion of rod and
subjected to an internal pre~;sure of
stress produced when the expansion is fully 2
prevented. Given : a = 14 x 10-<i per "C and

2.0 MNlm • Take E = 200 GN/m2 and
Poisson's ratio = 0.25.
E = 2 x 105 N I mm'.
(d) CalCUlate the hoop, longitudinal and shear
Or
stresses spherical shell 2 m in length 70 ern
(c) Calculate the radius of a steel wire so that it
in diameter and 12 mrn thick When it is
can be applied torque of 0.4 kNm without
subjected to an internal preSSure of
exceeding a shearing stress of 50 MN/m2• 2
4.0 MN/m • Take E = 200 GN/m2 and
(d) Calculate the length of a 8 mm diameter steel Poisson's ratio = 0.3.
wire so that it can be twisted through one
complete revolution when a torque of
0.5 kNm is applied. Take C = 30 GN I m2•
5. (a) A 200 mm diameter circular beam is
subjected to a maximum bending moment of
500 kNm. Determine the maximum stress in
the beam.
(b) A solid round bar of 70 mm diameter ana
4 m long is used as a strut with one end fixed
and other hinged. Calculate the safe
compressive load by Euler's formula. Take
E = 200 GN/m2 and FOS = 3.0.
TCE-304
V-2
-.::300
V-2
~L'-__"_- ~~=_-·_-_-
__·~_"_--_-
__--_-_- .-_._"._
.. .~~_"_-_-_-_._-
__.-__-_...
_- _
• ",
Roll No.
TCE-305
B. Tech. (Civil) (Third Semester)

ENGINEERING GEOLOGY
"
Time: Three Hours] [ Maximum Marks: J 00

" "

(U) All questions are compulsory.

1. (a) What do you understand by Minerals? How

Minerals are formed?
(b) Define cleavage and fracture of a mineral

with examples.
V-3 P. T. o.
".
--- ,.,; -. 1
[2] TCE-305 [3] TCE-305
Or Oi-
(c) What are seismic waves? Explain with a (c) Draw a neat diagram of a fold and show (i)
neat diagram Gutenberg Discontinuity. its limbs, (ii) axial plane and (iii) fold axis.
Explain with a neat diagram reversal of dips
(d) Discuss the three factors that control the
due to folding ..
choice of building stones. Name five
(d) What is the difference between a normal and
common rocks that are important source of
reverse fault? Explain with neat diagrams.
building stones.
4. (a) What is focus and epicenter of an earthquake?
2.. (a) What are elastic sedimentary rocks ? What
What do you understand by Isoseismic line?
are the factorsthat control the porosity and
Explain with a neat diagram.
permeability of elastic sedimentary rocks?
(b) What are different causes of Earthquakes ?
. .
(b) What are intrusive and extrusive igneous
Name two major thrust traversing the
rocks ? Explain with a neat diagrams.
Himalaya along which strain relief is taking
Or place due .to the ongoing Himalayan
(c) What is the difference between a batholith tectonics.
and a stock? Explain with neat diagrams. Or
(d) Explain what is meant by chilled margins and (c) Discuss three important .adverse geological
contact metamorphism. conditions that would require remediation
during construction of buildings.
3. (a) Explain with neat diagram apparent and true
dip. What does the variation in dip and strike (d) Explain what is an aquifer. Draw a neat
.diagram of an unconfined aquifer.
of rocks indicate?
(b) Draw dip and strike symbols of horizontal, 5. (a) Discuss the geological investigations that are
inclined sedimentary and metamorphic rocks. carried out for Dam site selection.
Name the instrument used to measure (b) Explain with neat diagrams favourable and
attitude of strata. unfavourable dips at a Dam site.
V-3 P.T.O.
[4] TCE-305
Or
(C) Explain the principles used in the electrical

resistivity and electrical Sf methods of
geophysical exploration:
(d) Explain the method which is used for

determining depth of bedrock below River
Borne Material (RBM) at Dam site.
,
~ . e.
TCE-305 220
V-3
I/--- --
r- ..•
;",'r~
\>,.
M ':--
--._.-
-_ _._------
.•
•
Roll No.
TMA-301 ",

End' Semester EXAMINATION, 2014
ENGINEERING MA lHEMA TICS-III
(Hi) Each question. carries four Parts (a), (b),
(c) and (d), Attempt either Parts (a) and
1. (a) Define sine transform and find Fourier sine
e-ax
transform of -.
x·
(b) Find Fourier cosine transform of ~ and

' . l+x
hence find Fourier sine transform of ~.

I+ x
V-22
P.T.O.
~
•
[3] TMA-3f"1
[2] 'TMA-301
(d) Define kinds of singularity and fmd out of
Or
Residue for each pole:
(c) Define z-Transfonn. Find z-transfonn of
1
k ~ o. r 12z - 7 d.
(k + 1) ! .t (z _ 1)2 (2z + 3) z
(d) Using z-transfonn, solve the following
difference equation: where C is the circle Izl = 2.
Yk+2 + 4Yk+1 + 3Yk = 3k 3. (a) Find the roots of the equation:
given Yo =0 and Yl = 1. .x3 - 3x - 5 =0
2. (a) State and prove Cauchy Integral formula and
by Newton-Raphson method.
hence evaluate:
(b) Using Simpson's 113 and Weddle's rule:
r 3z2 +z dz •
.\:: z2 -1 .
where c is the circle Izl = 2. 11:Xx2

(b) Define analytic and harmonic functions with divide the interval into 6 parts each of width
examples. Show that : h= i.
u ( x, y) = x2 - y2, v ( x, y) = - ...2 Y - Or
+y
(c) Using Newton's forward formula, find value
both are harmonic functions.
of 1(1.2) and using Backward formula, find
Or
(c) Find the Taylor's and Laurent's series which value of/(2. 0) :
represent the function
x 1(x)
z2 -1
(z+2)(z+3) .:' 1 3.49
1.4 4.82
when:
1.8 5.96
(i) Izl =< 2 2.2 6.5
(ii) Izl=>3
V-22 P. T.O.
V-22
\
--I TMA-301
[5]
'. •
Find
[4] TMA-301 (i) the value of a
(ii) P (X < 5) P (X ~ 6) and P (0 < X < 5)
(d) Using Lagrange's formula findy (8) given by
the table: " Or
(c) Define Regression. The following data
x Y . regarding the heights (y) and weights (x) of
4 48 100 colleges students are given by : -,
5 100 I.x == 15000,I.x2 == 2272500,r.y == 6800,

7 294 ,,- r.i == 463025,I.xy == 1022250.
10 900 Find the equation of regression line of height
I t
11 1210
on weight.
13 2028 (d) Define Kurtosis. DiscusS the Kurtosis of the
4. (a) Define Poisson distribution with properties. uion : f.
IOllUVV 'HE> --- y
If3% of the elec.tric bulbs manufactured by a X
.company are defective, find the probability 8
0-10 12
that in a sample of 100 bulbs, there are 5
10-20 20
defective bulbs, more than 4 defective
bulbs.
20-30 30
30--40
(b) Defme probability mass function and 15
40-50 10
probability density function. A discrete
50.-{)0
random variable X has the probability 5
function given below:
60-70
he following data
Values X, x I .. P (x) 5. (a) rll a. ,:)u-. .•..
z::y----
y
o 0 X
1200
1 a 1
900
2 2a 2 600
3. 2a 3 200
4 110
4 3a
5 50
5 a2 6
6 2a2 P. T.O.
7 7a2+ a .. V-22
V-22
-~~~.~'.~----~.-.
-
[61
TMA-301
(b) Solve by Cardon method x3 -18x _ 35 = o.
Or
z
(c) Prove that w == - maps the upper half of
1-z
z-plane onto the upper half of w-plane. What
is the imag~ of the circle /z/ =1 under this
transformation ?
(d) Solve by Ferrari's method:
3 .,
x4 - 12 x + 41 x2 - 18 x _ 72 = 0.
<,
·0
TMA-301
100
V-22 • 0
•
Roll No.
TMA-307
B. Tech. (Petroleum Engg.)
(Third Semester)
ADY ANCED MA THEMA TICS
Time: Three Hou;s ] [ Maximum Marks: J 00
1. (a) Define Fourier transform. Find the Fourier
transform of the function:
I + (x/a), - a sx s0
f (x) = 1- (x/a), 0~x ~a .,
{
o , otherwise
(b) Find the z-transform of :
(i) f (k) = {2k}, k ~ O.
(ii) f(k) = {cos(uk)},k > O.
V-39 P.T.O.
[2] TMA-307 [3] TMA-307
Or (d) Write Cauchy Integral formula. Use Cauchy
(c) Solve the equation -

a
au = t,X 2U
> O,t > O.
integral formula to evaluate
at ax sin 1[Z2 + cos 1[Z2 ..
Subject to the conditions: i( z-I ) ( z-2 )
dz, where C IS the circle
(i) u = 0 when x = 0, t > 0 Izl = 3.

I , O~x~1
(ii) u ={ when t = 0 I
3. (a) Expand f(z) - In Laurent
o , x >I - (z+l)(z+3)
(iii) u ( x, t) is bounded. series valid for:
(d) Define a-transform. Solve by z-transform the (i) 0< Izl < 1
difference equation:
(ii) 01. < Izl < 3
Yk+2 + 6Yk+l + 9Yk = 2k,
(iii) Izl > 3
given that y(O) = Y(l) = O.
(b) Use Cauchy residue theorem to evaluate
2. (a) Define Analytic function of Complex
function. Find the values of C1 and C2 such i( z +z2)+( 2z3z + 3)' dz
2
h
were
C'
IS
h . I
t e circ e
that the function:
Izl = 3.
fez) = x2 + C1y2 - 2xy + i( C2X2 - y2 + 2xy)
Or
is analytic function. Also find fez). (c) Show that:
(b) If f (z) is regular function of z, show that
!X cos ze de 21ta
2
fior (2a < 1)
=--,
1,- 2 a cos e + a2 1 - a2
a2
ax +
a
ay2
2
J If(z)1 2
= 411' (z)1 2 .
( 2 1+;
Or
_ (d) Evaluate f (x2 ~ iy) dz along the path :
0
(c) Define Conformal Transformation. Find the
(i) y=x
image of Iz - 3 il = 3, under the mapping
I
(ii) y = x2
W=-.
z
V-39 V-39
P.T.O.
(4)
TMA-107 TMA-307
[5 1
4. (a) Write Poisson distribution formula. Fit a
Poisson distribution on the following data . 5. (a) Define the following terms:
and calculate theoretical frequencies: (i) Normal Fuzzy set
Deaths Frequencies (ii) Complement of Fuzzy set
0 122 (iii) a-cut
1 60 (iv) Decomposition of Fuzzy sets.
2 - (b) Define Cardinality of a Fuzzy set and Fuzzy
15
3 Cardinality of a Fuzzy set. Let X =
2
4 , {l, 2, .... , l O}.
I
Determine cardinalities and relative
(b) In' a sample of 1000 cases, the mean of a
cardinalities of the following fuzzy sets:
certain test is ~I4 and standard deviation is
2.5. Assuming the distribution to be normal, (i) A = {(2, .4), (3, .6), (4, .8), (5, .1),
find: (6, .8), (7, .6), (8, .4)
(i) How many students between 12 and 15 ? (ii) B = {(2, .5), (4, .8), (5, 1), (7,.6)
Or .~
(ii) How many score above '18 ?
(iii) How many score below 8 ? (c) Define union and intersection of two Fuzzy
sets A and B. If X = {I, 2, 3, 4}.
Or
A = {(l, .2), (2,.5), (3,.8), (4,.1)}, and
(c) In a normal distribution 31 % of the items are
B = {(l, .3) (2, .6), (3, .9), (4,1)}. Find union
under 45 and 8% are over..64. Find the mean
and intersection of two fuzzy sets A and B.
and, standard deviation of the distribution.
(d) Define Binomial Distribution. (d) Show that the function zlzl is not analytic
(i) In a binomial distribution the sum and anywhere.

the product of the mean and variance are
25/3 and 50/3 respectively. Find .the
binomial distribution.
(ii) From a pack of 52 cards 6 cards are
drawn at random. Find the probability
that 3 are red and 3 are black cards.
TMA-307 100
V-39
V-39
•
Roll No.
TMA-304
B. Tech. (EEC) (Third Semester)
ADVANCED ENGINEERING MA THEMA TICS
Time: Three Hours t [Maximum Marks: 100
1. (a) Examine the function for Continuity and
Differentiability :
X2' when x50
f (x) = I, when O<x51
{
lIx, when x > I e.
(b) State and prove Bolzano-Weierstrass

theorem.
Or
(c) Every Convergent sequence is bounded but
the converse is not true.
V-38 P. T.O.
-------I
[2] 'TMA-304 [3] TMA-304
(d) If M & N are neighbourhood of a point x, (b) Find the vaJue of the integral:
then M n N is also a neighbourhood of x. 1(x + y)dx + x2 ydy
2. (a) Examine the convergence of:
2 dx
(i) Along y = xl having (0, 0). (3, 9) end
points.
(i) fo)x(I+X)
(ii) Along y = 3x between the same points.
( dx
(ii) fo Or
(c) Evaluate the residues of:
(b) Test the uniform convergence the series: z2
- J(z)------
f{
n=( x+n
n n-I}
x+n-I
~ - (z-l)(z-2)(z-3)
at z.= 1,2,3 and infinity and show that-their
in the interval [0,00]. sum is zero.
(d) Find the value of integral :
Or
(c) Verify Cauchy's Mean Value Theorem for i)
(1
13z2 z+1
+ 7z + I dz were
h C' IS th e circ
. Ie
the function x2 and x in the interval [a, b] .
1
(d) Discuss the applicability of Rolle's theorem
Izi =-.
2
in the function:
(ii) r
.cz
2 z +4
+2z+5
dz if C is the circle
J (x) = {x2 + I, when 0::; x::; I
3-x , when I < x::; 2 Iz + 11 = 1.
3. (a) Evaluate:
4. '(a) Find the approximate value of fO
lt/2
~sin e dx
1(z + I) .dz
e2z
using Simpson's rule (both 1/3 and 3/8) with
six equal intervals.
where Cis Izl = 3.
V-38 V-38
P.T.O.
[4] TMA-304 [5 ] TMA-304
(b) Using Lagrange's interpolation formula, find s. (a) If a random variable X follow Poisson
the value of y corresponding to x = 3 from distribution such that P(x = 1) = P (x = 2),
the following table: then find:
x f(x) (i) The mean of distribution
0 580 (ii) P(x=O)

1 556 (b) The diameter, says X, of an electric cable, is
2 520 assumed to be continuous random with
4 385 p. d. f. :
Or j(x)=6x(l-x), O~x~l
•...,
(i) Check that the above is a p. d. f.
(c) Find a root of Xl + xl - 3x - 3 =0 between
(ii) Compute:
(2, 3), upto 3rd decimal place by using
Regula-Falsi method. X~-
(d) The following table gives the population of
town during the last six censuses. Estimate p [ t~x:~J 1
using any suitable interpolation formula, the Or

increase in the population during the period
(c) Four coins are tossed simultaneously. What
from 1946 to 1948 : - is the probability of getting?
Population (in (i) 2 head and 2 tails
Year
thousands) (ii) at least two heads.
1911 12 (d) 1[3% of the electric bulbs manufactured by a
1921 15 company are defective, find the probability
1931 20 that in a sample of 100 bulbs exactly five
1941 27 bulbs are defective. (e-3 = 0.04979)
1951 39
1961 52 TMA-304 150
V-38
V-38
Roll No.
TBT-301
"< CELL BIOLOGY

1. (a) How will you differentiate a Prokaryotic cell e.

from an Eukaryotic cell ?
(b) Give an account on cytosol and cytoplasm.
Or
(c) Write a short note on Plant cell wall.
(d) Explain the structure and various functions of
endoplasmic reticulum.
V-3 P.T.O.
•
(2J T~T-301 (3J
2. (a)· Write an essay on ATP dependant 'proton 5. (a) Write short notes on the following:
pumps.
(i) Microtubules
(b) Discuss the role of ethylene and auxin in
plant signalling. (ii) Microfilaments.
Or . (b) Write down a note on Glycosaminoglycans.
(c) Explain the G proteins based signalling.
Or
(d) Discuss the different properties that
contribute to cancer. (c) Describe the classification of organism by
cell structure.
3. (a) What is action potential ? Explain the
mechanism, how electrical impulses lead to (d) Give an account on cytosol and cytoplasm.
secretion of neurotransmitter?
(b) Differentiate the three classes of muscles
found in human.
Or
(c) Discuss the role of cadherins and integrins in
cell-cell adhesion.
(d) Explain the cell differentiation in animal cell.
4. (a) Describe the process by which a proto-

oncogene can be made overactive to convert
it into an oncogene.
(b) Give an account on cell junctions.
Or
(c) Describe the cell cycle. How does cell cycle
regulation occur?
(d) Describe the process of receptor-mediated
endocytosis with suitable illustrations. , TBT-301 (50
. .
V-3 V-3
•
Roll No.
TBT-302
./

MICROBIOLOGY
1. (a) What is the relation between bacterial'

e.
generation time (G) and growth rate constant
(K) ? Prove the relation .
.(b) Give examples of two selective cum
differential media for isolation of enteric
bacteria. Explain the method of bacterial
isolation.
V-3 P. T. o.
\
[2] TBT-302 [3]
Or (b) Give the principle of differential staining

(c) Explain similarity and differences between used in microbiology laboratory.
protoplast and mycoplasma. Or
(d) Give examples and mode of action of
(c) What are Lysogens ? Differentiate lytic and
chemical sterilizing agents. lysogenic cycle.
2. (a) Explain the basis of bacterial classification.
(d) How bacteriophage life cycle is related to
(b) How synchronized bacterial growth can be transduction process ?
obtained? Give its method.
Or 5. (a) How bacteria can be classified on the basis of
gaseous requirements?
(c) What do you mean by essential organelles
present in bacteria ?.~xplain function of any (b) How E. coli and salmonella can be
two organelles. . differentiated on EMB (Eosin methylene blue
(d) Define smear and fixation. Give method of agar media) ? Explain.
.negative staining and why is it preferred over Or
simple staining?
(c) Give classification of viruses on the basis of
3. (a) Discuss the scope and relevance of Medical capsomers arrangement.
Microbiology.
(d) If initial bacterial population (Bo) is 50 and
(b) Briefly discuss contribution of Robert Koch
and Louis Pasteur in Microbiology. after n generations (Bn) it is 6400. The cells
were incubated for 2 hours. How many
Or
generations have occurred?
(c) How temperature affects bacterial growth ?
Explain using suitable graph.
I
(d) How bacterial growth can be measured by

cell numbers? Explain the indirect method.
4. (a) How antibiotics inhibit bacterial cell wall
synthesis ? Give suitable diagram showing
antibiotic target sites. TBT-302 60
V-3 V-3
•
Roll No.
TMA-303
B. Tech. (Mechanical and Automobile Engg.)
(Third Semester)
, End Semester EXAMINATION, 2014
ENGINEERING MA THEMA TICS-III

with alternative choice .
. (ii) All questions are compulsory.
"
1. (a) Define Bilinear Transformation. Find the

bilinear transformation which maps the
points z = 1,i, -1 into the points w = i, 0, -i.
Hence find the image of Izl < 1.
V-15 P. T.O.
•
[2] TMA-303
[3] TMA-303
(b) Define analytic function with example. If
of the z-plane corresponds to the interior of
1(z) is an analytic function of z, prove that:
the circle?
a2 a2 ) logl/(z)1 = o.
+ -2 Or
( ax
-2
Oy , (c) Evaluate:
Or
J. z2 + I dz
(c) Examine the nature of the function: 'fc z2 - 1
x 2y 5 ( x + lY.
.) where C is circle:
f( z ) = 4 IO ,z:t:
0
X + Y (i) Izl = 3/2
1(0) = 0
(ii) Iz - 11 = 1
(d) Evaluate S:+i{z)2dz, along: (iii) Izl = 112
(i) the real axis form z = 0 to z = 2 and (d) (i) Prove that:
then along a line parallel to y-axis from 11V = VIl = 82
z =2 to z = 2 + i. (ii) Find the missing terms in the table:
(ii) along the line 2 Y = x. x Y
2f (a) State and prove Cauchy Integral formula. 45 3.
Use Cauchy Integral formula to evaluate:
50 ...
J.. sin 1t z2 + cos 1t z2 dz
'fc (z -1){z - 2) 55 2
where C is the circle Izl = 3. 60 ...

65 -2.4
(b) Show -that under the transformation
w = (z - i) / (z + i), real axis in the z-plane is
3 . (a) Evaluate r1t/2 . , h
Jo SInx dx, correct to tree
mapped into the circle Iwi = 1. Which portion decimal places using Simpson's 1I3rd rule
the Trapezoidal rule using 11 ordinates."
V-15 V-15 P. T.O.

•
[4] TIII\A-303
[5] TMA-303
(b) "Using the following table find a polynomial 4., (a) Given:
and hence find /(9) using Newton's divided
dy y2 - x2
difference interpolation formula : dx = y2 + x2
x y
where y(O) = 1,h = 0.2, find y(O.2) and
5 150
7 392 y ( 0.4). correct to four decimal places using
11 1452 Runge-Kutta method of order four.

13 2366
(b) Determine y (0.4) given that:
17 5202
Or <,
y(O) == land dy = x + y2,h = 0.1
dx
(c) UseLagranges interpolation formula to find
using Milne's predictor-corrector method.
a polynomial that takes the following values
Or
and hence find y ( 2) :
(c) Find the value of y(O.4) using Picard's
x y
1 -3 method, given that:
3 9
dy == x2+ y2
4 30 dx
6 132 '
subject to the condition y =0 when x = 0
(d) ,Given:
upto five approximations.
sin 45° = 0.7071, sin 50° = 0.7660, sin 55° = 0.8192,
(d) Find y (0.1) and y (0.2) using Euler's
sin 60° = 0.8660
modified formula given that:
Using Newton forward interpolation formula,
find sin 48° and Newton -backward dy = log ( x + v). y ( 0) == 1
dx
interpolation formula, find sin 58°.
V-15 V-iS P. T.O.

•
n~A-303 [7] TMA-303
[6 ]
5. (a). Define Poisson distribution and write its Or

properties. Fit a Poisson distribution to the (c) Write the properties of Normal Distribution.
set of observations :
A sample of 100 dry battery cells tested to
x f find the length of life produced the following
0 122 results : x= 12 hours, c = 3 hours.
1 60 Assuming the data to be normally
2 15 distributed, what percentage of battery cells
3 2 are expected to have life:
4 1
(i) more than 15 hours
(b) Define Probability Mass function and (ii) less than 6 hours
probability Density function. A discrete
random variable . X has the following (iii) between 10 and 14 hours
probability distribution: (d) Find the moment generating function of the
discrete binomial distribution given by
Value of X, x P (X =x)
P (x) = "C; pxqn-x (where q = 1- p). Also
0 a
find first and second moments about the
1 3a mean.
2 5a
3 1a
4 9a
5 lla I
6 . 13 a
7 15a
8 17a
(i) Find the value of a
(ii) Find:
P (X<3),P (O<X<3),P (X~3) 300
TMA-303
(iii) Find the distribution function of X.
V-1S
V-1S
•
Roll No.
< L-~~ __ ~~ __ ~~ __
t,
TBT-303

BIOCHEMISTRY
Time.' Three Hours] -,, [ Maximum Marks.' 100

1. (a) (i) What is the difference between alpha-D

glucopyranose and beta-D glucopyranose ?
•
How do they convert to each other ?
Describe the process of mutarotation
(ii) Give the diagrammatic representation .of
a polarimeter. Explain how non-plane
polarized light passes through the
V-3 P. T. O.
• [3] TBT-303
[2 ] TBT-303
instrument and specific rotation is (b) How are ketone bodies formed and utilized in
measured. our body?
(b) (i) Heart, liver, kidney, brain and muscles Or

are protected from damage during the (c) What is the structural organization of
process of starvation and when a person protein ? How are primary, secondary
is not taking food for long time. What is structure and tertiary structure of protein
the biological process that takes place? different from each other?
(ii) How the collection of acetone, beta (d) What are holoenzyme and cofactor? Give
hydroxy butyrate and acetoacetate . specific role of pyridoxal phosphate,
(ketone bodies) formed in our body? NADINADH and other coenzyme.
Or 3. (a) (i) What happens when we do heavy
(c) How are protein classified on the basis of exercise and what is the reason for
shape and size, biological functions they play tiredness?
inside our body and on the basis of (ii) Give the meaning of the word
solubilities ? Give suitable examples to Glycolysis. What are the various steps
justify your answer. involved in it ? How many total A TPs
(d) (i) What is the difference between acid
.. are formed when two molecules of
value and saponification value? Briefly glucose are converted into pyruvate?
describe both of them. What is the (b) What happens in the cell, when blood
application of these value in the food glucose are below normal and above
industry ? normal ? Describe both the processes of
(ii) Name the different membrane lipids of glycogenolysis and glycogenesis, mentioning
biological importance. Differentiate the enzymes involved in it.
saturated fatty acid with that of Or
unsaturated fatty acid. (c) (i) How are purine and pyrimidine named?
2. (a) What is beta oxidation ? Describe the Give the structures to explain it. What is
detailed process. Why this process is called the difference between DNA and RNA
beta oxidation? nucleotide?
V-3
V-3
[4J TBT-303 [5] TBT-303
(ii) What is acid value ? How sodium

(b) How Kreb's cycle are responsible for the
salts of fatty acid are formed in the
formation of NADH, FADH2 and GTP ?
laboratory? What are the applications of
Describe the cycle with enzymes.
both the processes ?
(d) (i) How do you structurally differentiate Or
starch from that of glycogen ?
(ii) Differentiate structurally monosaccharide (c) Explain the different forces that stabilizes the
with that of a disaccharide. Give protein structure. How are hydrophobic
examples of reducing and non-reducing interaction different from that of hydrogen
sugar. bonding?
4. (a) What is electrical and chemical gradient in (d) Describe pentose phosphate pathway in
E.T.C. ? How•..., oxidation ofNADH molecules detail.
are responsible for the synthesis of A TP, at
A TP synthase?
(b) Give the reactions associated with
transamination and deamination reaction.
What is the relevance of such reactions? .
Or
(c) (i) Give the detailed process of urea cycle.
(ii) Why these are so important for our
body?
(d) How blood glucose are maintained in our
body? How glucagon is responsible for it 1
5. (a) (i) Give the detailed classification of all the
polar and non-polar amino acid with
structures and rings.
(ii) What are essential and non-essential
amino acids and fatty acids?
TBT-303
GO
V-3
V-3
Roll No.
TMA-302
B. Tech. (Civil Engineering)
(Third Semester)
.ENGINEERING MATHEMA TICS-III
'-
(c) and .(d). Attempt either Parts (a) and
(iv) Each Part carries ten marks. Total marks .
1. (a) Define Fourier Integral. Express the
function:
F(x)~f o ,'
for Ixl < I·
for Ixl> I
as a Fourier integral.
(b) Define Fourier Transform. Find Fourier
transform of the function f (x) = e-Xl .
V-2 P. T. o.
•
[2 ] TMA-302 [3 ] TMA-302
. Or Or
(c) Solve the equation: (c) Define Conformal Transformation. Find the
au a2u ,x il
image of Iz - 3 = 3, under the mapping
- = -2 > 0, t > 0 I
at ax W=-.
z
Subject to the conditions:
(d) Write necessary condition for complex I'
(i) u =0 when x = 0, I > 0 function to be analytic. Show that the
I , os es i
function zjz] is not analytic anywhere. I
(ii) u ={ when t =0 3. (a) Write Newton-Raphson method. Using
0, x >1
\1
Newton-Raphson's method, find the real root
(Hi) u ( x, t) is bounded. of 3 x = cos x + 1 correct to three decimal
places.
(d) Define Fourier Transform. Find the Fourier
(b) Evaluate:
transform of the function:
F(x) ~ r~ x'
for
for
Ixl < 1
Ixl> 1 by:
Jo I
(i) Simpson's 113 rule.

I
1 + x2
dx
2. (a) Define Analytic function of complex (ii) Simpson's three eighth rule by dividing
function. Find the values of CI and C2 such the interval (0, 1) into six equal parts.
that the function : Or
f (z) = x2 + C) y2 - 2 xy + i (c) Evaluate:
5.2
( C2 x2 - y2 + 2 xy ) J4 logexdx
is analytic function. Also find I' (!Z ) • by:

(i) Trapezoidal rule.
(b) If f (z) is regular function of z, show that: (ii) Weddle's rule taking n = 6.
a2 a2) 2 2 (d) Define rate of convergence of iterative
ax
( 2 + ay2 li(z)1 = 4If'(z)1 methods. Prove that rate of convergence of
Newton-Raphson method is quadratic.
V-2 V-2 P. T. o.
[4] [5] TMA-302
TMA-302
4. (a) Write Poisson Distribution formula. Fit a (i) Find the value of a.
Poisson distribution to the following data and (ii) Find P (X<3),P(0<X< 3),P(X~3-).
calculate theoretical frequencies:
Deaths Frequencies
(d) Define Regression. Fit regression lines from
0 120 the following data :
1 62
x y
2 13
·3 10 14
3
4 2 12 17
(b) In a sample of 1000 cases, the mean of a 15 23
certain test is 14 and standard deviation is 23 25
2.5. Assuming thedistribution to be normal, 20 21
find:
(i) How many students between 12 and 15 ? 5. (a) Fit a second degree parabola by method of
least squares to the following data:
(ii) How many score above 18 ? -
(iii) How many score below 8 ? x y

Or 0 1
(c) Define Probability mass and Density 1 1.8
function. A discrete random variable X has 2 1.3
the following probability distribution:
3 2.5
Value ofX,x P(X=x) 4 6.3
0 a
1
(b) Solve the cubic equation xl. - '6 x - 9 =0 by
3a
Cardon's method.
2 5a
3 7a Or
, •
4 9a (c) Solve:
5 lla x4 - 10 x3 + 35 x2 - 50 x + 24 =0
6 13a by Ferrari method.
7 15a
8 17a
V-2 V-2 P. T.O.
----.--- - z
•
[6] TMA-302
(d) Calculate first four moments of the following

data:
x y
10-20 1
20-30 20
30-40 69
40-50 108
50-60 78
60-70. 22
70-80 2
"
TMA-302 ::220
V-2
Roll No.
TMA-305
\ B.. Tech. (CSIIT) (Third Semester)
\

GRAPH THEORY AND COMBINATORICS
with alternative choice,
1. (a) Define Isomorphism of the graphs. Find
whether the following graphs are isomorphic
or not:
a1 32 a3
('
e.
al as a6
V-32 P.T.O.
•
[2 ] 'TMA-305 [3] TMA-305
(ii) Prove that in a binary tree with n

b1
vertices, the number of pendant vertices
is (n + 1) 12.
(b) (i) Suppose that a tree T has two vertices of

b6 /' ,/A ~
/ b3
degree 2, four vertices of degree 3 and
three vertices of degree 4. Find the
number of pendant vertices in T.
b5 b4 (ii) Find the shortest distance between a and
i fusing Dijkstra's algorithm:
(b) (i) Prove that in a graph the number of odd
vertices is always even. b 6 d
<0>
(ii) Prove that a connected graph is Eulerian
iff all the vertices of the graph are of
even degree.
a 4 2~3 7 f
Or c 1 e
(c) (i) Show that the degree of a vertex of a Or
simple graph G on n vertices cannot (c) (i) .
Spanning trees.
exceed n -1. (ii) Write Kruskal's algorithm.
(ii) Show that the condition m s 3n - 6 is (d) (i) Suppose that a tree T has N 1 vertices of
not a sufficient condition for a degree 1, N2 vertices of degree 2, N3
connected simple graph with n vertices vertices of degree 3 N, vertices of
and m edges to be planar. degree k, prove that :
(d) (i) What is the maximum number of = 2 + N3
vertices in a graph with 37 edges and a~l
vertices are of degree at least 3 ?
, . ~
NI + 2 N4 + 3 Ns +
+(k-2)Nk
.
(ii) Every connected simple planar graph, q (ii) Draw the unique binary tree for the
contains a vertex of degree at most 5. I
given expression:
2. (a) (i) Prove that every tree with two or more ( x _ 2 y)3 (a; b)
vertices is 2-chromatic.
V-32 V-32 P. T.O.
'I
•
[5] .TMA-305
[4] TMA-305
ending with letter S. How many
3. (a) Define the following:
different arrangement are possible ?
(i) Permutation and combination How many of them start with letter D ?
(ii) Sum and product rules (ii) How many three-digit numbers can. be
(b) (i) Find the number of permutations of 9 formed with digits 1, 2, 3, 4 and 5 if the
objects in which 5 or more objects are in digits in the same number are not
there natural positions? repeated?
(ii) Find the rook polynomial for the 4. (a) (i) Define Recurrence relations.
following piece of chess board: (ii) Solve the . recurrence) relation
'!,. = a,._1 + 3, with al = 2.
(b) (i) What form does a particular solution of
the non-homogeneous recurrence
relation a" = 6 a"_1 - 9 a,,_2 + F (n) have
when:
(iii) How many solutions are there of
x + y + z = 17 subject to the constraints F(n) = 3",F(n) = n3",F (n) = n22"
x ~ 1, y ~ 2, z ~ 3 ? and F ( n) = (n2 + 1) 3" ?
(iv) There are four roads from city X to Y (ii) Solve the recurrence relation:
and five roads from city Y to Z. Find,
how many ways is it possible to travel a,.+2 = 5 a,.+1 - 6~,. + 7"
from city X to city Z via city Y and how Or
difJerent round trip routes are there from (c) Show that:
city X to Y to Z to Y and back to X. 1 13 71
ar =_r2 +-r+-
Or 4 24 288
is a particular solution for the recurrence \
(c) (i) Write inclusion-exclusion principle.
relation:
(ii) Explain Pigeonhole principle.
a, + 5 ar-l + 6 ar-2 = 3 r2 - 2r +1
(iii) Define Rook Polynomial.
(d) Solve the following difference equation:
(d) (i) The letters of the work "TUESDAY" are
arranged in a line each arrangement
ar+2 -7 ar+l - 8ar = 2r r2
P.T.O.
V-32 V-32
{6] TMA-305
5. (a) Define Generating Functions. Find the

generating function of the following series:
1, 1, 1, 1, 1, 1, 1.
(b) Use . generating functions
, to solve the
recurrence relation :
\ a, - 5ar_1 + 6,ar_2 = 2r + r,r ~ 2

with ao = 1,al = 1.
Or
(c) Solve the following difference equation by
the method of generating function:
-..,
a, - 7 ar_1 + 10ar-2 = 3r, r ~ 2
with the boundary condition:
ao = O,al = 1
(d) Express Fibonacci sequence of numbers
,-
1, 1,2,3,5,8, 13,21,34, in term of: -,
(i) General expression for the rth number
ar
(ii) Generating function
e.
TMA-305 400
V-32
---- . 00 __
\
TMA-306
B. Tech. (CSIIT) (Third Semester)

DISCRETE MA THEMA TICAL STRUCTURES
Time: Three Hou'rs ] [ Maximum Marks: 100
1. (a) 8% of the bulbs produced by a factory are red
and 2% are defective. If one bulb is picked
up at random, find the probability of its being e.
defective if it is red.
(b) The content of urns, I, II, III areas follows:
1 White, 2 ~lack and 3 Red balls
2 White, 1 Black and 1 Red balls
4 White, 5 Black and 3 Red balls.
V_22° P. T. O.
[2] "];MA-306 [3] TMA-306
One Urn is chosen at random and two balls (ii) If the function t :C ~ C defined by
drawn from it. They happen to be white and /(x)=x2·-1 for all xeC, find
red, What is the probability that they come
from Urn I?
1-1 (_8),/-1 (8).
(b) Draw the Hasse diagram of (A, ~), where
Or
A =-{3, 4, 12,24,48, 72} and a relation 6 be
(c) Let X be continuous random variable with such that a ~ b if a 'divides b. Find the
probability function given by:
greatest lower bound and least upper bound
lex O~x<l of the sets {4, I2} and {12, 24, 48}.
k 'i~x<2 Or
/(x) =.
+kx + 3k 2 ~ x < 3 (c) Given that A = {I, 2, 3, 4} and B = {a, b, c,
o elsewhere d} and C = {p, q, r} and R is a 'relation from
A to B, S is the relation from B to C defined
(i) Determine the constant k. as R = {(1, a), (2, c), (3, b), (4, a), (4, d)} and
S = {(a,q), (b, p), (d, r), (c, p)}. Verify the
(ii) Determine the cumulative density (R 0 S)-I = ~-l 0 R-1•
function F (x).
(d) (i) Define Distributed Lattice.
(d) If a random variable X follows Poisson
(ii) Define partial ordered Set.
distribution such that P (x = l) = P (x = 2), .
(iii) Define Complemented Lattice
then find:
(iv) Define Injection and Surjective Mapping
(i) The mean of distribution
3. (a) Represent the argument:
(ii) P (x = 0) If it rains today, then we will not have a party
\
today.
2. (a) (i) Let A = {4, 6, 8, lO} and R = {(4, 4),
If we do not have party today, then we will
(4, 10), (6, 6), (6, 8), (8, 10)} is a
have a party tomorrow.
relation on set A. Determine symmetric
closure and transitive closure ofR.
V-22 V-22 P.T.O.

[4] TMA-306
Therefore, if it rains today, then we will have

party tomorrow.
Translate symbolically and determine
whether the argument is valid.
(b) Show that pv -(p A q) is a Tautology.
Or J~
(c) Calculate truth table for check whether it is

tautology or contradiction:
(i) (p v q) A (- pA - q)
{ii) p ~ (p '( q)
"
(d) Express the following using quantifiers if
K (x) : x is student,
.M (x) : x is clever,
N (x), : x is successful:
(i) There exists a student ,
(ii). Some students are clever
(iii) Some students are not successful
'"
4. (a) If:
G = {Ji,h,jj'/4}
where:
. I I j
.Ii(x) = x'/2(x) = -x,jj(x) = -'/4(x) =--
x x --
then show that (G, *) is abelian group where
* shows the composition of function.
(b) If there are two groups :
(i) Additive group ofinteger (I, +) and
V-22
•
Roll No.
TBT-304

GENETICS
Time: Three Hour$] [ Maximum Marks: 100
Note: (i) This question paper-contains five questions
.with alternative choice.
(iii) Each question carries' four Parts (a), (b),
assigned to.each question are twenty ..
1. (a) What is epistasis.? What is the difference

between dominance and epistasis? Explain
the phenomenon of epistasis with example.
(b) Describe structural change in chromosome
because of translocation .
..
. Or
(c) With the help of well labelled diagrams
explain different stages of meiosis-I.
V-3 P.T.O.
[2] TBT-3Q4 [3]
(d) What Js Edward Syndrome ? What -are its Or

symptoms and causes? (c) What is incomplete linkage? Explain with an
example.
2. (a) Describe the structure of nucleosome model
(d) Describe different steps of mechanism of
with a suitable diagram.
crossmg over.
(b) Explain the phenomenon of Sex-linked
5. (a) Describe different : factors- which change
inheritance with an example.
allele frequency within population.
Or
(b) Explain the following terms:
(c) What are salivary gland chromosomes ?
(i) Gene Pool
Describe the structure with a diagram.
, ' (ii) Darwin theory
(d) What is sex-influenced inheritance? Explain
(iii) Assortative mating-
with example.
(iv) Theory of inheritance of acquired
3. (a) What are induced mutations? Describe the characters.
ways by which different chemicals induce (v) Hardy-Weinberg Principle
mutations. Or
(b) What is SOS response ? Describe its role in (c) What is quantitative inheritance? Explain the
DNA repair mechanism. phenomenon by giving suitable example.
Or (d) Explain the process of three point test cross.
(c) What is point mutation? Explain different How does it help in genetic mapping?
types of point mutations with examples.
(d) With the help of a diagram explain Methyl-
Directed Mismatch repair.
4. (a) What is complete linkage ? Explain the

phenomenon with suitable example.
(b) Describe the procedure of somatic cell hybrid
production. What is its significance? TBT-304
60
V-3
V-3
•
Roll No.
TBT-305

End Semester EXAMINATION; 2014
BIOANAL YTICAL TECHNIQUES
Time: Three'Hours] [ Maximum Marks: 100
(c) and (d). Attempt either Parts (a) and ..,
1. (a) What is Phase contrast microscopy? Explain
its method in detail.
(b) Which chromatography should be used for
enzyme purification? Describe the method in
detail.
Or
(c) What are different units of radioactivity ?
Explain in detail.
V-3 P.T.C.
[2J TBT-305 [3]
(d) Explain how numerical aperture controls Or

resolution. Describe it with the formula.
(c) What is .resolution in chromatography .?
2. (a) What is Infrared Spectrophotometry .? Describe it in detail.
Explain its principle in detail.
(d) What is GM counter .? How is it used for
(b) What is the basic principle of Electrophoresis .? radioactivity measurement .?
Provide detail.
Or 5 (a) Explain the method of SDS PAGE in detail.
(c) Differentiate between anion and cation (b) Describe the' law of centrifugation. Explain
. exchanger with examples. the role of gravity in centrifugation.
, (d) Explain the detailed' structure' of NMR· . Or
spectrophotometer.
,
(c). What is Thin Layer Chromatography .?
3. (a) Give details of different types of centrifuges
Describe its method in detail.
used in laboratory.
(b) Why heavy metals are used for SEM .? (d) Differentiate between SEM and TEM with
diagrams.
Explain the method of sample preparation for
SEM.,
Or ,'
(c) Explain how retention time is different from
adjusted retention time in' chromatography.
Describe in detail.
(d) What is IEF .? Explain how is it used for .
protein purification in laboratory.
1
4. (a) What, is radioactivity .? Explain different

types of radioisotopes used in radioactive
measurement.
(b) What is half life of radioactive isotope .?
Explain it with some examples. TBT-30S 60
•
~.
V-3. V-3

3rd Sem End Term 2014

Uploaded by

Copyright:

Available Formats

3rd Sem End Term 2014

Uploaded by

Document Information

Original Description:

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

3rd Sem End Term 2014

Uploaded by

Copyright:

Available Formats

I .

(iii) Is it possible to have a group of seven persons ••

K-99 K-99 P. T.O.

Section-B 14 (7+7) each

S. (a) Write Dijkstra's algorithm. 8. (a) Define the following:

f (iv) Paths and Circuits

(iv) Define Random variable and Moment where C is the circle

generating function. "

K-99 K-99 P. T.O.

TMA-304 [5] TMA-304

in the interval [a, b].

4. (a) An electrostatic field in the xy-plane is given by (b) Evaluate:

(b) Find the image of /z = 3 i/ = 3 under the

(i) Find the value of a. 15 23

[b] Find the measure of Kurtosis for the following

[2] TMA-302 [3] TMA-302

modulus is constant. find the Fourier sine transform of.!..

K-89 K-89 P. T.O.

[4] TMA-302 (b) Evaluate:

decimal places. weight of the envelopes is normally distributed

B. Tech. (ME + AME) (Third Semester)

(iv) Evaluate c: Z2 dz along the line y = x.

[ (x) = kx (1 - x), 0 ~ x :5 1 3. (a) Find the analytic function [(z) = u + iv,

K-91 K-91 P. T.O.

(iii) Comment on method for celUractionation. Section-B 14 (7.•+ 7) each

Cb) Discuss in detail the different type of "

8. (a) Discuss in detail the "NO" mediated signa ling

[b] With the help of suitable diagram, discuss

1. (a) Sketch stress-strain diagram for ductile e.

material and explain its salient features.

[2] TM,E~.03 [3] TME-303

face the efficiencies of longitudinal and

5. (a) Derivetorsion equation for shafts. TME-303

V-38 V-38 P.T.O.

4. (a) Derive the expression for the following

(b) (i) Find current i (t) in the following figure, Or

F (s) = 5 s2 + 2 s - lis (s2 + 2 s + 5)

ltl V] + Find f (t) for the above function.

period. Obtain the complete expressio [9] TEC-304

(b) What is Hurwitz polynomial ? Write the

(c) Define all the transfer functions of 2-port

(b) or Parts (c) and (d) of each question.

.~. (a) Explain the classification of error by giving

torque corresponding to deflection of 600 is An analog transducer with 0-10 V input is

(d) What do you understand by resolution and

[6] , TEC-303 [7] TEC-303

Or (i) Two sinusoidal signals, 90° out of phase

(ii) (A2B. AD)16 = (? )BCD

(iv) (231)10 + (BCD)16 = (?)10

the function using NAND gates:

2. (a) (i) Realise the expression using NOR gates

[4] TEC-302 [5] TEC-302

(ix) Fan out

[2] TEC-301 [3 ] TEC-301

YOI Si Y04 3. (a) Write short notes on the following:

v-. Y03 (i) MOS capacitance

Fig. 1 (ii) Darlington amplifier

V-39 V-39 P.T.O.

(b) Calculate Ic and VCE for the given circuit: Or