Scribd
Upload
4K views3 pages

Tolerance Tables - Round Bars Iso F7 - Tolerances: f7 Diameter MM Upper Lower

The document provides tables of tolerance standards from ISO, ASTM, and DIN for round bars of various diameters. ISO F7 gives upper and lower tolerance limits that range from -0.010 to -0.050 mm for diameters from 3 to 250 mm. ISO H provides minus tolerances from -0.006 to -0.520 mm. ISO J and K provide both plus and minus tolerances. ASTM A484/A484M gives tolerances from +/-0.15 to +6.50/-0 mm for diameters from 8 to 625 mm. DIN 1013 provides tolerances from +/-0.40 to +/-2.50 mm for diameters from 8 to 200 mm.

Uploaded by

Umang Soni
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
4K views3 pages

Tolerance Tables - Round Bars Iso F7 - Tolerances: f7 Diameter MM Upper Lower

The document provides tables of tolerance standards from ISO, ASTM, and DIN for round bars of various diameters. ISO F7 gives upper and lower tolerance limits that range from -0.010 to -0.050 mm for diameters from 3 to 250 mm. ISO H provides minus tolerances from -0.006 to -0.520 mm. ISO J and K provide both plus and minus tolerances. ASTM A484/A484M gives tolerances from +/-0.15 to +6.50/-0 mm for diameters from 8 to 625 mm. DIN 1013 provides tolerances from +/-0.40 to +/-2.50 mm for diameters from 8 to 200 mm.

Uploaded by

Umang Soni
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

TOLERANCE TABLES - ROUND BARS

ISO F7 - TOLERANCES
f7
Diameter mm Upper Lower
over 3 & up to & incl 6 -0.010 -0.022
over 6 to 10 -0.013 -0.028
over 10 to 18 -0.016 -0.034
over 18 to 30 -0.020 -0.041
over 30 to 50 -0.025 -0.050
over 50 to 80 -0.030 -0.060
over 80 to 120 -0.036 -0.071
over 120 to 180 -0.043 -0.083
over 180 to 250 -0.050 -0.096

ISO H TOLERANCES
Diameter mm h6 h7 h8 h9 h10 h11 h12

up to & incl 3 -0.006/+0 -0.010/+0 -0.014/+0 -0.025/+0 -0.040/+0 -0.060/+0 -0.100/+0


3<6 -0.008/+0 -0.012/+0 -0.018/+0 -0.030/+0 -0.048/+0 -0.075/+0 -0.120/+0
6 < 10 -0.009/+0 -0.015/+0 -0.022/+0 -0.036/+0 -0.058/+0 -0.090/+0 -0.150/+0
10 < 18 -0.011/+0 -0.018/+0 -0.027/+0 -0.043/+0 -0.070/+0 -0.110/+0 -0.180/+0
18 < 30 -0.013/+0 -0.021/+0 -0.033/+0 -0.052/+0 -0.084/+0 -0.130/+0 -0.210/+0
30 < 50 -0.016/+0 -0.025/+0 -0.039/+0 -0.062/+0 -0.100/+0 -0.160/+0 -0.250/+0
50 < 80 -0.019/+0 -0.030/+0 -0.046/+0 -0.074/+0 -0.120/+0 -0.190/+0 -0.300/+0
80 < 120 -0.022/+0 -0.035/+0 -0.054/+0 -0.087/+0 -0.140/+0 -0.220/+0 -0.350/+0
120 < 180 -0.025/+0 -0.040/+0 -0.063/+0 -0.100/+0 -0.160/+0 -0.250/+0 -0.400/+0
180 < 250 -0.029/+0 -0.046/+0 -0.072/+0 -0.115/+0 -0.185/+0 -0.290/+0 -0.460/+0
250 < 315 -0.032/+0 -0.052/+0 -0.081/+0 -0.130/+0 -0.210/+0 -0.320/+0 -0.520/+0
ISO h-tolerances are always minus tolerances.

ISO J - TOLERANCES
Diameter mm j5 j6 j7

up to & incl 3 +.004/-.002 +.006/-.004


3<6 +.003/-.002 +.006/-.002 +.008/-.004
6 < 10 +.004/-.002 +.007/-.002 +.010/-.005
10 < 18 +.005/-.003 +.008/-.002 +.012/-.006
18 < 30 +.005/-.004 +.009/-.004 +.013/-.008
30 < 50 +.006/-.005 +.011/-.005 +.015/-.010
50 < 80 +.006/-.007 +.012/-.007 +.018/-.012
80 < 120 +.006/-.009 +.013/-.009 +.020/-.015
120 < 180 +.007/-.011 +.014/-.011 +.022/-.018
180 < 250 +.007/-.013 +.016/-.013 +.025/-.021
250 < 315 +.007/-.016
ISO K - TOLERANCES
Diameter mm k6 k7 k8 k9 k10 k11 k12

up to & incl 3 +0.006/-0 +0.010/-0 +0.014/-0 +0.025/-0 +0.040/-0 +0.060/-0 +0.100/-0


3<6 +0.009/+0.001 +0.013/+0.001 +0.018/-0 +0.030/-0 +0.048/-0 +0.075/-0 +0.120/-0
6 < 10 +0.010/+0.001 +0.016/+0.001 +0.022/-0 +0.036/-0 +0.058/-0 +0.090/-0 +0.150/-0
10 < 18 +0.012/+0.001 +0.019/+0.001 +0.027/-0 +0.043/-0 +0.070/-0 +0.110/-0 +0.180/-0
18 < 30 +0.015/+0.002 +0.023/+0.002 +0.033/-0 +0.052/-0 +0.084/-0 +0.130/-0 +0.210/-0
30 < 50 +0.018/+0.002 +0.027/+0.002 +0.039/-0 +0.062/-0 +0.100/-0 +0.160/-0 +0.250/-0
50 < 80 +0.021/+0.002 +0.032/+0.002 +0.046/-0 +0.074/-0 +0.120/-0 +0.190/-0 +0.300/-0
80 < 120 +0.025/+0.003 +0.038/+0.003 +0.054/-0 +0.087/-0 +0.140/-0 +0.220/-0 +0.350/-0
120 < 180 +0.028/+0.003 +0.043/+0.003 +0.063/-0 +0.100/-0 +0.160/-0 +0.250/-0 +0.400/-0
180 < 250 +0.033/+0.004 +0.050/+0.004 +0.072/-0 +0.115/-0 +0.185/-0 +0.290/-0 +0.460/-0
250 < 315 +0.036/+0.004 +0.056/+0.004 +0.081/-0 +0.130/-0 +0.210/-0 +0.320/-0 +0.520/-0

ASTM A484/A484M
Diameter mm Tolerance mm

8 > 11 +/-0.15
11 > 15.5 +/-0.18
15.5 > 22 +/-0.20
22 > 25 +/-0.23
25 > 28 +/-0.25
28 > 31.5 +/-0.28
31.5 > 34.5 +/-0.30
34.5 > 38 +/-0.35
38 > 50 +0.40/-0
50 > 63 +0.80/-0
63 > 90 +1.20/-0
90 > 115 +1.60/-0
115 > 140 +2.00/-0
140 > 165 +3.00/-0
165 > 200 +4.00/-0
200 > 300 +4.80/-0
300 > 400 +5.50/-0
400 > 625 +6.50/-0
DIN 1013
Diameter mm Tolerance mm

8 - 15 +/-0.40
16 - 25 +/-0.50
26 - 35 +/-0.60
36 - 50 +/-0.80
51 - 80 +/-1.00
81 - 100 +/-1.30
101 - 120 +/-1.50
121 - 160 +/-2.00
161 - 200 +/-2.50

You might also like