FTC

SLANT BED CNC TURNING CENTER

Optional Accessories
• Extra hard/soft jaw
• Automatic door
• Parts catcher
• Tool setter
• Programmable tailstock
• Chip conveyor/chip bucket
• Bar feeder
Standard Accessories • Power tooling + C axis
• 3-Jaw power chuck • Boring bar holder (1set) • Quill movement controlled by M function
• Manual tailstock • Morse taper MT3 socket (1 set) • U drill holder, socket
• Programmable tailstock (FTC-640/640L) (MT5 for FTC-640) • Collet chuck
• Hydraulic quill movement • Hard jaw (1 set) • Oil mist collecter
• Heat exchanger • Soft jaw (3 set) • Air blower
• Face cutting holder ( 2 set) • Chip conveyor (FTC-640/640) • Coolant gun
• Boring tool socket (4 set) • Fanuc 0I-T • Live tool holder

Model FTC-300 FTC-350 FTC-350L FTC-350XL FTC-350LY

Swing Over Bed mm Ø 550 Ø 600 Ø 600 Ø 600 Ø 600
Max. Turning Diameter mm Ø 300 Ø 350 Ø 350 Ø 350 Ø 350
Max. Turning Length mm 320 340 660 1,000 585
Hydarulic Power Chuck Diameter inch Ø 169(6”) Ø 210(8”) Ø 210(8”) Ø 210(8”) Ø 210(8”)
Swing Over Saddle mm Ø 260 Ø 400 Ø 400 Ø 400 Ø 400
X-Axis Travel mm 150+20 175+25 175+25 175+25 175+25
Y-Axis Travel mm - - - - 80(±40)
Z-Axis Travel mm 350 380 700 1,040 625
Rapid Traverse X-Axis m/min 24 30 30 30 24
Rapid Traverse Y-Axis m/min - - - - 12
Rapid Traverse Z-Axis m/min 24 30 30 30 24
Spindel Nose A2-5 A2-6 A2-6 A2-6 A2-6
Spindle Speed rpm 6,000 45-4,500 45-4,500 45-4,500 45-4,500
Spindel Bore Diameter mm Ø 62 Ø 62 Ø 62 Ø 62 Ø 62
Trough Hole Draw Tube mm Ø 52 Ø 52 Ø 52 Ø 52 Ø 52
Spindle Bearing Diameter mm Ø 90 Ø 100 Ø 100 Ø 100 Ø 100
Spindel Taper MT MT-6 1:20 1:20 1:20 1:20
No. of Tools set 10 8(12) 8(12) 8(12) VDI30,12
Standard O.D. Tool Size mm □ 20 □ 25 □ 25 □ 25 □ 20
I. D. Tool Size (Max) mm Ø 25 Ø 40 Ø 40 Ø 40 Ø 32
Tool Change Time sec 0.3 0.3 0.3 0.3 0.3
Tailstock Quill Diameter mm Ø 50 Ø 70 Ø 70 Ø 70 Ø 70
Tailstock Quill Stroke mm 80 90 90 90 90
Tailstock Quill Taper mm MT-3 MT-4 MT-4 MT-4 MT-4
Tailstock Movement Method Manual Manual Manual Manual Manual
Tailstock Quill Movement Method Hydraulic Hydraulic Hydraulic Hydraulic Hydraulic
Spindel Motor (Cont/30) kW 7.5 / 11 15 / 18.5 15 / 18.5 15 / 18.5 75 / 9.5
X/Y/Z Servo Motor kW 1.2(x) / 1.2(z) 3(x) / 3(z) 3(x) / 3(z) 3(x) / 3(z) 3.0 / 1.6 / 3.0
Coolant Tank Capacity ℓ 100 90 110 135 110
Machine Width mm 2,500 2,564 2,880 3,496 2,880
Machine Depht mm 1,530 1,580 1,580 1,665 1,800
Machine Height mm 1,650 1,944 1,944 1,869 2,041
Machine Weight kg 3,100 3,500 4,000 4,500 4,500

* Specifications are subject to change without prior notice.

ii www.kawanlama.com
FTC
SLANT BED CNC TURNING CENTER

Optional Accessories
• Extra hard/soft jaw
• Automatic door
• Parts catcher
• Tool setter
• Programmable tailstock
• Chip conveyor/chip bucket
• Bar feeder
Standard Accessories • Power tooling + C axis
• 3-Jaw power chuck • Boring bar holder (1set) • Quill movement controlled by M function
• Manual tailstock • Morse taper MT3 socket (1 set) • U drill holder, socket
• Programmable tailstock (FTC-640/640L) (MT5 for FTC-640) • Collet chuck
• Hydraulic quill movement • Hard jaw (1 set) • Oil mist collecter
• Heat exchanger • Soft jaw (3 set) • Air blower
• Face cutting holder ( 2 set) • Chip conveyor (FTC-640/640) • Coolant gun
• Boring tool socket (4 set) • Fanuc 0I-T • Live tool holder

Model FTC-350SLY FTC-450 FTC-450MC FTC-640 FTC-640L

Swing Over Bed mm Ø 650 Ø 670 Ø 670 Ø 750 Ø 750
Max. Turning Diameter mm Ø 350 Ø 450 Ø 260 Ø 550 Ø 550
Max. Turning Length mm 515 651 600 808 1,440
Hydarulic Power Chuck Diameter inch Ø 210 sub: Ø 169 10” 10” 15” 15”
Swing Over Saddle mm Ø 450 Ø 450 Ø 450 Ø 550 Ø 550
X-Axis Travel mm 175+25 225+2 205+2 320+25 320+25
Y-Axis Travel mm 80(±40) - - - -
Z-Axis Travel mm 555 700 640 870 1,500
Rapid Traverse X-Axis m/min 24 30 30 20 20
Rapid Traverse Y-Axis m/min 12 - - - -
Rapid Traverse Z-Axis m/min 24 30 30 20 20
Spindel Nose A2-6 sub: A2-5 A2-8 A2-8 A2-11 A2-11
Spindle Speed rpm 45-4,500 sub: 6,000 35~3,500 35~3,500 2,000(2.step) 2,000(2.step)
Spindel Bore Diameter mm Ø 62 sub: Ø 56 Ø 88 Ø 88 Ø 131 Ø 131
Trough Hole Draw Tube mm Ø 52 sub: Ø 45 - - - -
Spindle Bearing Diameter mm Ø 100 sub: Ø90 - - - -
Spindel Taper MT 1:20 sub: MT#6 1:20 1:20 1:20 1:20
No. of Tools set VDI30,12 8 12 12 12
Standard O.D. Tool Size mm □ 20 □ 25 □ 25 □ 32 □ 32
I. D. Tool Size (Max) mm Ø 32 Ø 40 Ø 40 Ø 50 Ø 50
Tool Change Time sec 0.3 0.3 0.24 0.3 0.3
Tailstock Quill Diameter mm - Ø 100 Ø 100 Ø 100 Ø 100
Tailstock Quill Stroke mm - 100 100 100 100
Tailstock Quill Taper mm - MT-4 MT-4 MT-5 MT-5
Tailstock Movement Method - Manual Manual Programmable Programmable
Tailstock Quill Movement Method - Hydraulic Hydraulic Hydraulic Hydraulic
Spindel Motor (Cont/30) kW 75 / 9 sub: 5.5 / 7.5 18.5 / 22 18.5 / 22 22 / 26 22 / 26
X/Y/Z Servo Motor kW 3.0 / 1.6/ 3.0 / 1.6(E) 3(X) / 3 (E) 3(X) / 3 (E) 4(X) / 4 (Z) 4(X) / 4 (Z)
Coolant Tank Capacity ℓ 180 185 140 200 350
Machine Width mm 3,190 3,350 3,350 4,500 5,400
Machine Depht mm 2,010 1,770 1,770 2,125 2,125
Machine Height mm 1,967 2,220 2,220 2,415 2,415
Machine Weight kg 5,000 5,000 5,000 9,550 10,500

* Specifications are subject to change without prior notice.

www.kawanlama.com www.krisbow.com 1
 FTC
CNC TURNING CENTER

Standard Accessories
• Boring tool holder
• Boring bar socket
• Coolant system
• Face cutting holder
• Hard jaws
• Heat exchanger
• Hydraulic system
• Manual tailstock
• Morse taper MT3 socket
• Soft jaws
• Through-hole hydraulic chuck

Optional Accessories
• Air blaster
• Automatic door
• Bar feeder
• Bar feeder interface (LNS system)
• Chip conveyor/chip bucket
• Extra hard/soft jaws
• Gantry loader
• High-pressure coolant pump
• Parts catcher
• Programmable tailstock (not available in FTC-10)
• Tool setter
• Transformer
• Two-stage clamping force by M function
• VDI tool holders
• VDI turret
• Workpiece supplier

Model FTC-10 FTC-20 FTC-20L FTC-30

Swing Over Bed mm Ø 520 Ø 560 Ø 600 Ø 580
Standard Turning Diameter mm Ø 180 Ø 250 Ø 250 Ø 310
Max. Turning Diameter mm Ø 240 Ø 350 Ø 350 Ø 450
Max. Turning Length mm 255 343 613 621
Hydarulic Power Chuck Diameter inch 6” (8”) 8” (10”) 8” (10”) 10” (12”)
Swing Over Saddle mm Ø 260 Ø 350 Ø 400 Ø 450
X-Axis Travel mm 120+20 175+25 175+25 225+25
Z-Axis Travel mm 290 380 650 670
Rapid Traverse X/Z Axis m/min 24 / 24 24 / 24 24 / 24 20/20
Spindel Nose A2-5 A2-6 A2-6 A2-8
Spindle Speed rpm 6,000 4,500 4,500 3,500
Spindel Bore Diameter mm Ø 56 Ø 62 Ø 62 Ø 88
Trough Hole Draw Tube mm Ø 45 Ø 52 Ø 52 Ø 75
Spindle Bearing Diameter mm Ø 90 Ø 100 Ø 100 Ø 130
Spindel Taper MT MT#6 1:20 1:20 1:20
No. of Tools set 10T 8T 8T 8T
Standard O.D. Tool Size mm □ 20 □ 25 □ 25 □ 25
I. D. Tool Size (Max.) mm Ø 25 Ø 40 Ø 40 Ø 40
Tailstock Quill Diameter mm Ø 50 Ø 65 Ø 65 Ø 100
Tailstock Quill Stroke mm 80 90 90 100
Tailstock Quill Taper mm MT-3 MT-4 MT-4 MT-4
Spindel Motor (30min/Continous) kW 11 / 7.5 18.5 / 15 18.5 / 15 22 / 18.5
Servo Motor kW X=1.2 / Z=1.2 X=3.0 / Z=3.0 X=3.0 / Z=3.0 X=3.0 / Z=3.0
Coolant Tank Capacity ℓ 95 100 250 95
Floor Space mm 1,795 x 1,317 2,530 x 1,535 2,750 x 1,542 2,920 x 1,685
Machine Weight kg 2,500 3,550 3,850 5,080

* Specifications are subject to change without prior notice.

2 www.kawanlama.com
FVP
VERTICAL MACHINING CENTER

Optional Accessories
• Spindle speed 10,000/12,000 rpm (#40)
• Spindle oil cooler
• ZF 2-stage gear box (for FV-1300A/1500A/1600A)
• Screw type chip conveyor
• Chain type chip conveyor and bucket
• Deep hole adapter
• Coolant through spindle and filtering system
• High pressure pump
• Programmable coolant nozzle
Standard Accessories • 4th-axis rotary table interface or package
• Belt type transmission • Automatic lubrication system • Auto tool length measurement and breakage detection
• Rigid tapping • Spindle speed and load meter • Arm type ATC
• Spindle air blast • Leveling bolt and plates • Heat exchanger
• Fully enclosed splash guard • Full set of manual • Chip flushing system and coolant gun
• Coolant unit • Carrousel type ATC • 3 color alaram light
• Pneumatic system • Transformer

Model FVP-800(A) FVP-1000(A) FVP-1300(A) FVP-1500(A) FVP-1600(A)

X-Axis Travel mm 800 1,020 1,300 1,525 1,600
Y-Axis Travel mm 500 500 610 760 800
Z-Axis Travel mm 505 505 560 650 800
Spindel Nose to Table Center mm 100-605 80-585 125-685 150-800 100-900
Spindel Center to Column Surface mm 510 510 640 810 850
Table Dimension mm 950 x 425 1,150 x 475 1,420 x 600 1,700 x 750 1,680 x 800
T-Slots mm 18 x 3 x 100 18 x 4 x 100 18 x 5 x 100 22 x 5 x 125 18 x 6 x 125
Max. Loading Weigth kg 800 800 1,500 1,500 1,000
Spindle Speed rpm 10,000 10,000 10,000 6,000 8,000
Spindel Taper 7/24 Taper No.40 7/24 Taper No.40 7/24 Taper No.40 7/24 Taper No.50 7/24 Taper No.40
Spindel Diameter mm Ø 70 Ø 70 Ø 70 Ø 100 Ø 70
Spindel Motor kW 7.5 / 11 7.5 / 11 7.5 / 11 11 /15 9 / 11
Rapid Traverse (X/Y/Z- Axis) m/min 32 / 24 / 24 32 / 24 / 24 32 / 24 / 24 15 / 15 / 12 18 / 18 / 15
Cutting Feedrate m/min 15 15 15 10 10
Tool Changing Time
sec. Approx. 1.9 sec. Approx. 1.9 sec. Approx. 1.9 sec. Approx. 3.5 sec. Approx. 1.9 sec.
(Tool to Tool) Arm Type
Tool Changing Time
sec. Approx. 7 sec. Approx. 7 sec. Approx. 7 sec. - Approx. 7 sec.
(Tool to Tool) Carrousel Type
Carrousel type/ Carrousel type/ Carrousel type/ Carrousel type/
Tool Changer Arm type
(Arm type) (Arm type) (Arm type) (Arm type)
No. of Tool 22 / (24) 22 / (24) 22 / (24) 22 / (24) 22 / (24)
Pull Stud P-40T (45°) P-40T (45°) P-40T (45°) P-50T (45°) P-40T (45°)
Max. Tool Weight kg 7 7 7 15 7
Max. Tool Length mm 250 250 250 350 300
Max. Tool Diameter mm Ø 80 Ø 80 Ø 80 Ø 100 Ø 80
Max. Tool Diameter
mm Ø 150 Ø 150 Ø 150 Ø 200 Ø 150
(No Adjacent Tool)
Floor Space mm 2,435 x 2,350 2,800 x 2,350 3,550 x 2,370 3,720 x 3,070 4,300 x 3,050
Machine Weight kg 4,850 4,950 7,100 11,500 11,000
Max. Machine Height mm 2,795 2,795 2,665 3,200 3,188
Power Capacity kVA 25 25 25 25 20
Air Source bar 6-8 6-8 6-8 6-8 6-8

* Specifications are subject to change without prior notice.

www.kawanlama.com www.krisbow.com 3
 VMP
VERTICAL MACHINING CENTER

Standard Accessories Optional Accessories

• Heat exchanger • 3 axis linear scales
• 3 axis pretensioned ballscrews • Coolant trough spindle
• Clamping/unclamping device • Workpiece measurement system
• Automatic lubrication system • Automatic tool length measurement
• Fully enclosed splash guard and brakage detection
• Dust-proof electrical cabinet • Chip conveyor
• Spindle air sealing • Chip screw
• 3-color signal light (VMP-23/30 opt) • Spindle oil cooler
• Rigid tapping • Flushing system + coolant gun
• Leveling blocks and plates • Front flushing (VMP 45/50)
• Spindle coolant nozzle • Top roof
• Operation and maintenance manual • 4th axis preparation or rotary table
• Manual pallet changer
(except VMP-23/30)
• Deep hole adaptor
• High presure pump
• Auto power off
• Rear cover
• 12,000 rpm belt type spindle BT-40
• 10,000rpm DDS spindle
• 12,000/15,000 rpm DDS spindle
(except VMP-23/30)
• ZF gear box (except VMP-23/30)

Model VMP-23(A) VMP-30(A) VMP-32(A) VMP-40(A) VMP-45S(A) VMP-45(A) VMP-50(A)

X-Axis Travel mm 580 760 820 1,020 1,100 1,100 1,300
Y-Axis Travel mm 420 420 520 520 700 610 610
Z-Axis Travel mm 510 510 505 505 600 600 600
Spindel Nose to Table Surface mm 80 - 590 80 - 590 100 - 605 80 - 585 200 - 800 135 - 735 120 - 720
Spindel Center to
mm 455 455 560 560 770 660 660
Column Surface
Table Surface to Floor mm 820 820 920 940 950 960 975
Table Center to
mm 245 - 665 245 - 665 300 - 820 300 - 820 420 - 1,120 355 - 965 355 - 965
Column Surface
Table Dimension mm 420 x 650 420 x 890 520 x 950 520 x 1,150 1,300 x 700 1,200 x 600 1,420 x 600
Max. Load kg 300 300 800 800 1,000 1,500 1,500
T-Slots mm 14 x 4 x 100 14 x 4 x 100 18 x 5 x 100 18 x 5 x 100 18 x 5 x 125 18 x 5 x 100 18 x 5 x 100
Spindle Speed rpm 10,000 10,000 10,000 10,000 10,000 10,000 10,000
7/24 Taper 7/24 Taper 7/24 Taper 7/24 Taper 7/24 Taper 7/24 Taper 7/24 Taper
Spindel Taper
No.40 No.40 No.40 No.40 No.40 No.40 No.40
Spindel Power kW 7.5 / 11 7.5 / 11 7.5 / 11 7.5 / 11 6 / 11 7.5 / 11 7.5 / 11
Rapid Traverse (X - Axis) m/min 36 36 40 40 24 36 36
Rapid Traverse (Y- Axis) m/min 36 36 40 40 24 36 36
Rapid Traverse (Z- Axis) m/min 36 36 30 30 15 24 24
Carrousel 7 sec / 60Hz, 7 sec / 60Hz, 7 sec / 60Hz, 7 sec / 60Hz, 7 sec / 60Hz, 7 sec / 60Hz,
7 sec (NO.40)
Tool Changing Time Type 7.1 sec / 50Hz 7.1 sec / 50Hz 7.1 sec / 50Hz 7.1 sec / 50Hz 7.1 sec / 50Hz 7.1 sec / 50Hz
(Tool to Tool) Arm 1.7 sec / 60Hz, 1.7 sec / 60Hz, 1.7 sec / 60Hz, 1.7 sec / 60Hz, 1.9 sec / 60Hz, 1.7 sec / 60Hz,
1.7 sec (NO.40)
Type 2.0 sec / 50Hz 2.0 sec / 50Hz 2.0 sec / 50Hz 2.0 sec / 50Hz 2.2 sec / 50Hz 2.0 sec / 50Hz
Carrousel Carrousel Carrousel Carrousel Carrousel Carrousel Carrousel
Tool Changer
(Arm) (Arm) (Arm) (Arm) (Arm) (Arm) (Arm)
No. of Tool 18 (20) 18 (20) 22 (24) 22 (24) 22 (24) 24 24
Pull Stud P-40T (45°) P-40T (45°) P-40T (45°) P-40T (45°) P-40T (45°) P-40T (45°) P-40T (45°)
Max. Tool Weight kg 7 7 8 8 7 8 8
Max. Tool Length mm 250 250 300 300 250 300 300
Max. Tool Diameter mm Ø 80 Ø 80 Ø 80 Ø 80 Ø 80 Ø 80 Ø 80
Max. Tool Diameter
mm Ø 130 Ø 130 Ø 150 Ø 150 Ø 150 Ø 150 Ø 150
(No Adjacent Tool)
Floor Space mm 1,900 x 2,230 2,100 x 2,230 2,665 x 2,185 2,800 x 2,185 3,440 x 2,860 3,180 x 2,750 3,550 x 2,750
Machine Weight kg 3,000 3,300 5,800 6,300 9,000 6,800 7,300
Max. Machine Heigth mm 2,370 2,370 2,800 2,800 2,925 2,900 2,900
Power Capacity kVA 20 20 25 25 25 25 25
Air Source bar 6-8 6-8 6-8 6-8 6-8 6-8 6-8

* Specifications are subject to change without prior notice.

4 www.kawanlama.com
NBP
VERTICAL MACHINING CENTER

Optional Accessories
• 12,000/15,000 rpm DDS spindle
• 12,000 rpm belt type spindle
• 2-sided chip screw
• 3-axis linear scale
• 30 Nos. ATC
• 4TH or 5TH axis preparation
or rotary table package
• Auto tool length measurement
and breakage detection
• Air condition
• Coolant gun
Standard Accessories • Coolant trough spindle form A
• 3-color signal light • Operation and maintenance manual • Chip conveyor or chip screw
• 3-axis pro tensioned ballscrew • Rigid tapping • Gearhead transmission
• Automatic lubrication system • RS-32 interfance • High pressure coolant pump
• Belt type transmission • Spindle air blast • Rear flushing
• Dust-proof electrical cabinet • Spindle air sealing • Spindle oil cooler
• Enclosed splash guard • Water-oil separator • Transfomer
• Heat exchanger • Working light • Workingpiece measurement
• Leveling bolts and plates • 2F 2-stage gear box

Model NBP-800 (A) NBP-1000 (A) NBP-1100 (A) NBP-1300 (A)

X-Axis Travel mm 800 1,000 1,100 1,300
Y-Axis Travel mm 520 610 610 610
Z-Axis Travel mm 505 600 600 600
Spindel Nose to Table Surface mm 100 - 605 110 - 710 125 - 725 125 - 725
Spindel Center to Column Surface mm 560 660 660 660
Table Surface to Floor mm 920 985 860 860
Table Center to Column Surface mm 300 - 820 355 - 965 355 - 965 355 - 965
Table Dimension mm 950 x 520 1,150 x 600 1,300 x 600 1,500 x 600
Max. Loading Weight kg 500 1,000 1,300 1,300
T-Slots (W x No. x P) mm 18 x 5 x 100 18 x 5 x 100 18 x 5 x 100 18 x 5 x 100
Spindle Speed rpm 10,000 10,000 10,000 10,000
Spindel Nose 7/24 Taper No.40 7/24 Taper No.40 7/24 Taper No.40 7/24 Taper No.40
Spindel Diameter mm Ø 70 Ø 70 Ø 70 Ø 70
Spindel Motor kW 7.5 / 11 7.5 / 11 7.5 / 11 kW (15 / 18.5) 7.5 / 11 kW (15 / 18.5)
Rapid Traverse (X - Axis) m/min 30 24 24 24
Rapid Traverse (Y- Axis) m/min 30 24 24 24
Rapid Traverse (Z- Axis) m/min 20 24 24 24
No. of Tool set 22(24) 22(24) 22(24) 22(24)
Pull Stud P-40T (45°) P-40T (45°) P-40T (45°) P-40T (45°)
Max. Tool Weight kg 8 8 8 8
Max. Tool Length mm 300 300 300 300
Max. Tool Diameter mm Ø 80 Ø 80 Ø 80 Ø 80
Max. Tool Diameter (No Adjacent Tool) mm Ø 150 Ø 150 Ø 150 Ø 150
7 sec / 60Hz, 7 sec / 60Hz, 7 sec / 60Hz, 7 sec / 60Hz,
Carrousel Type
7.1 sec / 50Hz 7.1 sec / 50Hz 7.1 sec / 50Hz 7.1 sec / 50Hz
Tool Changing Time (Tool To Tool)
1.7 sec / 60Hz, 1.7 sec / 60Hz, 1.7 sec / 60Hz, 1.7 sec / 60Hz,
Arm Type
2.0 sec / 50Hz 2.0 sec / 50Hz 2.0 sec / 50Hz 2.0 sec / 50Hz
Floor Space mm 2,530 x 2,185 3,180 x 2,185 3,180 x 2,180 3,550 x 2,330
Machine Weight kg 5,800 7,000 7,500 8,000
Max. Machine Heigth mm 2,800 2,900 2,700 2,700
Power Capacity kVA 25 25 25 25
Air Source bar 6-8 6-8 6-8 6-8

* Specifications are subject to change without prior notice.

www.kawanlama.com www.krisbow.com 5
 OTHER MACHINE TYPE

FT QMP
CNC TURNING VERTICAL
CENTER BOX MACHINING
WAY CENTER QUICK
MILL

FB
HV VERTICAL MACHINING
VERTICAL MACHINING CENTER BOX WAY
CENTER HIGH TECH

FV VB
VERTICAL MACHINING
DOUBLE COLUMN CENTER BOX WAY
MACHINING CENTER

kls/pna.200/5k/fl.3/ban.gra/10.12
TV U-600
DRILLING AND 5-AXIS VERTICAL
TAPPING CENTER MACHINING
CENTER

www.kawanlama.com
www.kawanlamaonline.com

6 www.kawanlama.com