Scribd
Upload
213 views4 pages

CircuitsII SH1

This document contains a worksheet for the Electrical Circuits II course. It includes 16 problems related to phasors, resonance response, and AC circuit analysis. The problems cover topics such as determining angular frequency, impedance, phase shifts, and voltage/current values for various AC circuit configurations involving resistors, capacitors, inductors, and sources. The instructor is Dr. Tarek Saad and the teaching assistant is Eng. Rania Abdel-Wahed.

Uploaded by

aymanabuz
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
213 views4 pages

CircuitsII SH1

This document contains a worksheet for the Electrical Circuits II course. It includes 16 problems related to phasors, resonance response, and AC circuit analysis. The problems cover topics such as determining angular frequency, impedance, phase shifts, and voltage/current values for various AC circuit configurations involving resistors, capacitors, inductors, and sources. The instructor is Dr. Tarek Saad and the teaching assistant is Eng. Rania Abdel-Wahed.

Uploaded by

aymanabuz
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 4

COLLEGE OF ENGINEERING & TECHNOLOGY

Department: Electrical and Computer Control Depart.


Lecturer: Dr. Tarek Saad
T. Assist: Eng.Rania Abdel-Wahed
Course: Electrical Circuits II
Course No.: EE 232
Sheet [1]
Phasors and Resonance Response
1 In a linear circuit, the voltage source is

vs = 12 sin (103t + 24) V

(a) What is the angular frequency of the voltage?


(b) What is the frequency of the source?
(c) Find the period of the voltage.
(d) Express vs in cosine form.
(e) Determine vs at t = 2.5 ms.

2 A current source in a linear circuit has

is = 8 cos(500t - 25) A

(a) What is the amplitude of the current?


(b) What is the angular frequency?
(c) Find the frequency of the current.
(d) Calculate is at t = 2 ms.

3 For the following pairs of sinusoids, determine which one leads and by how
much.

(a) v(t) = 10 cos(4t - 60) and i(t) = 4 sin(4t + 50)


(b) v1(t) = 4 cos(377t + 10) and v2(t) = -20 cos377t
(c) x(t) = 13 cos2t + 5 sin2t and y(t) = 15 cos(2t - 11.8)

4 Calculate these complex numbers and express your results in rectangular


form:

8�- 20o 10
(a) 2 + j 3 - j 4 + -5 + j12
( )( )
(b) 10 + (850)(5 - j12)
5 Obtain the sinusoids corresponding to each of the following phasors:

(a) V1 = 6015,  = 1
(b) V2 = 6 + j8,  = 40
(c) I1 = 2.8 e-j/3,  = 377
(d) I2 = -0.5 - j1.2,  = 103

6 Transform the following sinusoids to phasors:

(a) -10 cos(4t + 75)


(b) 5 sin(20t - 10)
(c) 4 cos2t + 3 sin2t

7 A current source of i(t) = 10 sin (377t + 30) A is applied to a single-element


load. The resulting voltage across the element is v(t) = - 65 cos(377t + 120)
V. What type of element is this? Calculate its value.

8 If vs = 5 cos 2t V in the circuit of Fig., find vo.

9 Calculate vo(t) in the circuit in Fig.

10 A capacitor in series with a 66-ohm resistor is connected to a 120-V, 60-Hz


source. If the impedance of the circuit is 116 ohm, determine the size of the
capacitor.
11 Consider the phase-shifting circuit in Fig. Let Vi = 120 V operating at 60 Hz.
Find:

(a) Vo when R is maximum


(b) Vo when R is minimum
(c) value of R that will produce a phase shift of 45 V.

12 A series audio circuit is shown in Fig.

(a) What is the impedance of the circuit?


(b) If the frequency were halved, what would be the impedance of the circuit?

13 An industrial load is modeled as a series combination of a capacitance and a


resistance as shown in Fig. Calculate the value of an inductance L across the
series combination so that the net impedance is resistive at a frequency of
5 MHz.
14 What value of  will cause the forced response vo in Fig. to be zero?

15 A power transmission system is modeled as shown in Fig. 9.92. Given the


source voltage
Vs = 1150 V, source impedance
Zs = 1 + j0.5 , line impedance
Zt = 0.4 + j0.3 , and load impedance
ZL = 23.2 + j18.9 , find the load current IL.

16 For each of the circuits in Fig., find Vo/Vi for  = 0,  → , and


 2 = 1/LC.

You might also like