0% found this document useful (0 votes)
176 views1 page

Stepper Motor - pfc25

The document provides specifications for the PF(C)25-24 and PF(C)25-48 tin-can stepper motors from Nippon Pulse. Key specifications include the motor type, excitation mode, step angle, steps per revolution, winding resistance and inductance, holding torque, rotor inertia, operating temperature range, and dimensions. A chart also shows the pull-out torque curve for a PF(C)25-48P1 motor driven with a bipolar constant voltage driver.

Uploaded by

Khalid Zghear
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
176 views1 page

Stepper Motor - pfc25

The document provides specifications for the PF(C)25-24 and PF(C)25-48 tin-can stepper motors from Nippon Pulse. Key specifications include the motor type, excitation mode, step angle, steps per revolution, winding resistance and inductance, holding torque, rotor inertia, operating temperature range, and dimensions. A chart also shows the pull-out torque curve for a PF(C)25-48P1 motor driven with a bipolar constant voltage driver.

Uploaded by

Khalid Zghear
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Tin-Can Steppers

Nippon Pulse PF(C)25


Your Partner in Motion Control

PF25 PFC25

Specifications
Specification Unit PF(C)25-24 PF(C)25-48
Type of Winding Unipolar Bipolar Unipolar Bipolar
Excitation Mode* Full step (2-2) Full step (2-2)
Step Angle ˚ 15 ±5% 7.5 ±5%
Steps Per Revolution* 24 48
Winding C D P Q C D P Q
Rated Voltage V 12 5 12 5 12 5 12 5
Resistance Ω 120 16 122 15 120 16 122 15
Inductance mH 34 4.5 66 8 37 5 81 10
Holding Torque* mN·m 8 8 10 10 10 10 12 12
Rotor Inertia kg·m2 1.0 x 10-7 1.0 x 10-7
Starting Pulse Rate* pps 490 790
Slewing Pulse Rate* pps 900
Operating Temp. Range ˚C -10 to +50
Temperature Rise* K 70
Weight g 35

Dimensions of Geared Model Torque Curve (pull-out torque)*


PF25 Tin-Can Stepper with Gearhead (P Type) PF25-48P1 w/ Bipolar Constant Voltage
PF(C)25 w/P Gear Head Bipolar Constant Voltage (48P1) Driver: CD-404B1
Bipolar Constant Current (48R1)
Excitation: Full-step
Resistance: 122ohm
11.6 MAX. 26 (1)
37
300mA
31 ±0.2 2 11.3 24V
10 1.4 10
15V
-0.02

2-Ø3.5
-0.1
6 ±0.2

Torque (mN•m)

8
Torque (oz•in)
0

200mA
2.5
Ø6

Ø3

Torque (mN·m)

12V
MAX. Ø 25.6
2- 7

5 0.71
Ø 25

1
0 100 200 300 400 500 600 700 800 900 (PPS)
200 ±10

0 2.08 4.17 6.25 8.33 10.4 12.5 14.6 16.7 18.8 (RPS) 0 500 1000 1500 2000 (pps)
UL1061
AWG28
(7)

Coil Resistance: 122Ω www.nipponpulse.com


Coil Resistance: 35Ω Supply Voltage: 24V
Nippon Pulse America, Inc.
1-540-633-1677
PF25-48C1 w/ Unipolar Constant Voltage
a subsidiary of Nippon Pulse Motor Co., Ltd.

Dimensions in mm Unipolar Constant Voltage (48C1) Driver:


Excitation:
PS-2LD-5
Full-step
Unipolar Constant Current (48H1)
Resistance: 120ohm

NipponGear
Pulse Ratio
America, Inc. 6/25 1/5 3/25 1/10 2/25 1/15 3/50
www.nipponpulse.com 1/20 340mA
a subsidiary of Nippon Pulse Motor Co., Ltd. 1-540-633-1677
Ordinary Torque 20mN·m 50mN·m
10 1.4 10
25.6V
Destruction Torque 60mN·m 150mN·m
Torque (mN•m)

Torque (oz•in)

230mA
Torque (mN·m)

12.8V
Gear Ratio 1/25 1/30 1/50 1/60 1/75 2/125 5 0.71
5

Ordinary Torque 70mN·m

Destruction Torque 210mN·m 0 500 1000 1500 (PPS)

0 10.4 20.8 31.3 (RPS) 0 1000 2000 3000 (pps)


Gear Ratio 1/100 1/120 1/125 1/150 1/200 1/250 1/300 Coil Resistance: 34Ω Supply Voltage: 24V
Nippon Pulse Coil Resistance:
America, Inc. 120Ω www.nipponpulse.com
a subsidiary of Nippon Pulse Motor Co., Ltd. 1-540-633-1677
Ordinary Torque 100mN·m All tin-can motor specifications are based on full-step constant voltage operation.
Magnet type: Anisotropic
Destruction Torque 300mN·m *Torque curves are for reference only and are not guaranteed

www.nipponpulse.com

You might also like