Scribd Logo
Upload

Welcome to Scribd!

  • 234 views

    Control Unit For Emergency Gensets With Analogue Inputs Kea 071 Anl

    Uploaded by

    rafat
    This control unit has two analog inputs to monitor oil pressure and engine temperature of standby generators. It controls generator operation, monitoring and protection. The unit mounts on a front panel and has inputs for 14 alarm signals and outputs for fault signals and relay control. Settings are configured via laptop connected through an optical fiber interface. It monitors voltage, frequency and protects against abnormalities on both the mains and generator sides.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Control Unit For Emergency Gensets With Analogue Inputs Kea 071 Anl

    Uploaded by

    rafat
    234 views1 page
    This control unit has two analog inputs to monitor oil pressure and engine temperature of standby generators. It controls generator operation, monitoring and protection. The unit mounts on a front panel and has inputs for 14 alarm signals and outputs for fault signals and relay control. Settings are configured via laptop connected through an optical fiber interface. It monitors voltage, frequency and protects against abnormalities on both the mains and generator sides.

    Original Description:

    rafat

    Original Title

    Datenblatt_KEA071ANL_uk01 rafat

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This control unit has two analog inputs to monitor oil pressure and engine temperature of standby generators. It controls generator operation, monitoring and protection. The unit mounts on a front panel and has inputs for 14 alarm signals and outputs for fault signals and relay control. Settings are configured via laptop connected through an optical fiber interface. It monitors voltage, frequency and protects against abnormalities on both the mains and generator sides.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    234 views1 page

    Control Unit For Emergency Gensets With Analogue Inputs Kea 071 Anl

    Uploaded by

    rafat
    This control unit has two analog inputs to monitor oil pressure and engine temperature of standby generators. It controls generator operation, monitoring and protection. The unit mounts on a front panel and has inputs for 14 alarm signals and outputs for fault signals and relay control. Settings are configured via laptop connected through an optical fiber interface. It monitors voltage, frequency and protects against abnormalities on both the mains and generator sides.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    Control unit for emergency gensets with analogue inputs

    KEA 071 ANL

    Application Technical data


    The control unit KEA 071 ANL genset operation Design − 2 analogue inputs 0/4/20
    is designed to control stand- - genset monitoring and pro- − unit for front-panel mounting, mA for e.g. oil pressure and
    by gensets. There are two tection − dimensions (WxHxD): engine temperature.
    analogue inputs for monito- - checking of mains voltage 260 x 170 x 80 mm,
    ring of oil pressure and en- return, synchronized over- − weight approx. 2.2 kg, Digital inputs, outputs
    gine temperature. The func- lap reconnection to mains − mounting position: any, − 14 inputs for alarm signal
    tions of the output relays and supply, cooling and shut- − degree of protection contacts, selectable NO/
    the relevant parameters are down of genset. (installed): IP 44, NC operation,
    to be set by using a laptop. − ambient temperature: − 4 internal fault signals of
    Furthermore, the control unit To monitor the assembly and storage -20 °C ... +70 °C mains:
    is fitted with an optical fibre the genset, the control unit operation 0 °C ... +55 °C 2 x voltage, 2 x frequency,
    connector by which a central is fitted with the following − standards/regulations: − 4 integrated fault signals of
    control system (a protocol facilities: DIN EN 50178. generator:
    converter might be required), − 3-phase voltage sensors, 2 x voltage, 2 x frequency,
    an alarm extension or the for mains and generator, Power supply − 12 outgoing relays on
    KUHSE Telemon monitoring monitoring under- and − selectable RZ 071-D, thereof 8 pro-
    system may be connected. overvoltage, under- and 9..12..15 volts DC, resp. grammable,
    overfrequency and asym- 14..24..35 volts DC. − 15 relays on RZ 071-E,
    The software for stand-by metry of phases, thereof 14 programmable,
    operation covers: − 14 externally connected Analogue inputs − optical fibre conductor
    - mains voltage failure de- fault signals, thereof max. 4 − mains and generator vol- (OFC) interface as a con-
    tection from analogue inputs, tage sensor, adjustable in nection to a PC in order
    3 / 2 / 03 12 / 1.0 / 2 / 03 11

    - checking of preliminary − 4 internally connected fault steps of 1 volt. to change settings, to a


    starting conditions signals each, for mains and − mains and generator fre- supervisory system by ad-
    - starting of genset and generator voltage, quency sensor 50 or 60 Hz, ditional hard- and software
    change-over from mains to − DC battery voltage monitor. adjustable 40 to 70 Hz, and to a remote monitoring
    generator supply continuously (<0.1 Hz), system.
    - frequency control for island

    Alfred Kuhse GmbH Tel.: +49 (0) 4171 / 798-0 E-Mail: [email protected] Subject to modification
    An der Kleinbahn 39, 21423 Winsen Fax: +49 (0) 4171 / 798-117 http://www.kuhse.de

    You might also like