Antares dryer ATT 025-340

with Tandem Technology

Short Description
Antares dryer with Tandem
Technology – an innovative family of
dryers for compressed air from 2.5 to
34m3/min manufactured by Parker.
“Tandem Technology” effectively
combines two well known classic dry-
ing techniques, working in harmony
with one another, to form an optimised
and unique compressed air treatment
package - Refrigeration Technology/
Adsorption Technology. This unique
combination enables high-quality
compressed air to be provided to the
end-user at low energy consumption
levels when compared to more tradi-
tional adsorption dryers.

Antares Tandem Technology con-

stantly achieves a dew-point of -40 °C initially confronted by a pre-filter pro- an effective and economical solution
as standard. To reach such levels of tecting a traditional, but modified and to meet the needs of the compressed
compressed air purity, patented prod- patented refrigeration circuit, where air user. With the addition of a dew-
uct features and mode of operation the majority of the water vapour is point dependent switching feature for
contribute to extremely low purge-air effectively removed from the incom- periods of intermittent load, incorpo-
requirements. Without the need to ing air. The second stage consists of rated into the electronic controller of
alter any of the components in the a highly-compact desiccant drying every ATT dryer, initial investment
dryer, AT-Technology is able to supply stage, protected before and after by costs are quickly amortised and life-
a wide range of compressed air dew- high-performance oil/water-aerosol time costs minimised.
points, achieved by simply setting the and particle removal filters, which
desired value on the control panel. serves to further reduce the mois- ATT dryers equipped with an optional
Dew-points above zero, typical of the ture content of the air to a standard by-pass are ideally suited to meet the
performance of a refrigeration dryer dew-point of -40 °C. Finally, clean, dry demands of seasonal variation, call-
and dew-points below zero (down compressed air exits via the patented ing for application flexibility to meet
to -70 °C), which are in the realms air/air heat-exchanger to be re-heated dew-points requirements above zero
of adsorption technology, are easily and delivered to the air distribution in summer and below zero in winter. In
achievable in an efficient and econom- system. such cases Antares Tandem Tech-
ical manner. Tried and tested, patent-pending tech- nology can be operated solely as a
Untreated, humid compressed air is nology, exploiting both PSA (pressure refrigeration-dryer or alternatively “in
swing adsorption) and TSA (tempera- tandem” with the adsorption stage.
ture swing adsorption) brings together
Product Specification
Antares dryer ATT 025-340 with Tandem Technology

The major advantage of Parker Hiross “Antares Tandem Technology” over and above that of
other compressed air drying technologies is its contribution to energy-efficiency and overall
running-cost reduction. Less overall power consumption, less purge-air consumption, con-
stant and stable outlet-pressure dew-points and reduced operating and maintenance costs
are the major features of this product range.

Key Applications: Key Benefits:

Food & Beverage Lower operating costs vs. traditional heatless and heat-regenerative adsorption
Surface treatment dryers (lower purge-air requirement and lower heater consumption).
Instrumentation and control Reduced maintenance costs due to less desiccant-fill with extended life time.
Automotive Constant dew-point performance - no peaks above set-point.
Materials handling „Dial-a dew-point feature“ for seasonal operation (By-pass Option)
Pharmaceutical Additional energy savings at partial load – (Dew-point-Dependant-Switching).
Chemical Compact overall dimensions – Small footprint - Space saving.
Material forming
Petrochemical

Scope of supply:
Antares Tandem Technology dryer – supplied ready for installation.
Complete with ISO-12500 validated oil/water-aerosol and particulate GL pre-filters,

located prior to the refrigeration circuit, and pre-and post the adsorption stage.
Dew-point Dependant Switching – A standard feature on all models.
Integral timed condensate drain on models ATT025-090 - integral capacitance condensate drain on models ATT140-340.

Optional:
By-pass for seasonal operation (Models ATT060-340).
7“ colour -Touch Screen Display (Models ATT140-340).
External electronic capacitive condensate drain (Models ATT025-090)
Ambient Temperature Probe for dew point suppression and / or automatic activation of
seasonal by-pass (Models ATT060-340).
ModBus communication interface.
 Product Specification
Antares dryer ATT 025-340 with Tandem Technology

Ordering – and Performance data

Refrig- Desiccant
Effec- Purge Air Desiccant
Airflow1 Air Con- Max erationcircuit Pre-filter
tive Avg. equivalent After-filter
Model Order-No. Inlet - Out- nections Pressure Pre-filter „Oil/Water-
absorbed absorbed- „Particu-
let m3/min BSPP-F barg „Oil/Water & aerosol &
power2 kW power kW
3
late“
particulate particulate“
ATT 025 ATT025-A23015016TI 2.5 – 2.4 1" 16 0.94 0.42 GL9ZL GL9XL GL9ZL
ATT 040 ATT040-A23015016TI 4 – 3.9 1" 16 1.30 0.68 GL11ZL GL11XL GL11ZL
ATT 060 ATT060-A23015012TI 6 – 5.8 1 ½" 12 1.27 1.02 GL11ZL GL11XL GL11ZL
ATT 090 ATT090-A23015012TI 9 – 8.7 1 ½" 12 1.94 1.53 GL12ZL GL12XL GL12ZL
ATT 140 ATT140-A40035012EI 14 – 13.6 2" 12 2.01 2.37 GL14ZL GL14XL GL14ZL
ATT 260 ATT260-A40035012EI 26 – 25.2 2 ½" 12 4.02 4.41 GL19ZL GL19XL GL19ZL
ATT 340 ATT340-A40035012EI 34 – 32.9 2 ½" 12 5.17 5.76 GL19ZL GL19XL GL19ZL
1
Referring to 1 bara and 20 °C at compressor suction capacity. Subsequently compressed to 7 barg at 35 °C inlet to the dryer, at 100 % relative humidity,
25 °C ambient, for -40 °C pressure dew-point. Outlet flow is the average net flow following subtraction of the average purge-air flow.
2
Calculated throughout the entire cycle period - includes total refrigeration-circuit and desiccant heater absorbed power.
3
Purge-air flow throughout the entire cycle period, evaluated as an air compressor absorbed power at the rate of 5.5 kW/m3/min.

Operating Range
Site Selection Frost-free indoor installation in a non-hazardous environment
Ambient Temperature 5 to 50 °C
Compressed air inlet temperature 5 to 65 °C
Operating pressure 2 to 16 barg - ATT025-040
2 to 12 barg - ATT060-090-140
4 to 12 barg - ATT260-340
Medium Compressed air and gaseous nitrogen

Electrical connections
Mains Voltage 230V, 1-phase, 50Hz on ATT025-090; 400V, 3-phase, 50Hz on ATT140-340
Protection class IP44

Materials of construction
Filters See product-specification regarding GL filter ref: ZL and XL
Heat Exchanger fridge section Stainless Steel plate-heat exchanger on ATT025-040
All-in-one „T-Smart Pack“ Aluminium heat exchanger on ATT060-340
Refrigerant fluid R134a in ATT025-040; R407C in ATT060-340
Pressure vessels Aluminium for ATT025-040; Carbon Steel for ATT060-340
Valve blocks ATT025-140: Brass valve, Aluminium blocks,
ATT260-340: 3-way valve galvanised steel, ball AISI 304, plastic check valves
Filling of desiccant section Water-resistant Silica Gel
Product Specification
Antares dryer ATT 025-340 with Tandem Technology

Pressure vessel approvals

EU Approval for fluid group 2 in accordance with the Pressure Equipment Directive 2014/68/EU

Quality assurance
Development/Manufacture ISO 9001, ISO 14001, OHSAS18001

Correction factors for ATT model selection

Inlet Temperature (°C) 30 35 40 45 50 55 60 65
Correction Factor 1.22 1 0.81 0.69 0.59 0.52 0.46 0.4

Working Pressure (barg)1 4 5 6 7 8 9 10 11 12 13 14 15 16

Correction Factor 0.62 0.75 0.87 1 1.08 1.2 1.28 1.34 1.4 1.45 1.5 1.54 1.6

Ambient Temperature (°C) 20 25 30 35 40 45 50

Correction Factor Note:
1.05 1 0.94 0.88 0.81 0.75 0.68 The above correction factors
ATT025-040
are approximative; please refer
Correction Factor always to the software selection
1.06 1 0.95 0.90 0.83 0.77 0.72
ATT060-340 program for a precise selection.
1
Model ATT025 - ATT040 max 16 barg
Model ATT060 - ATT340 max 12 barg

Example: air flow 500m3/h, operating pressure 8 barg, 40 °C inlet T, 30 °C ambient T, at -40 °C pdp

1) Find the correction factor in the table above: 8 barg = 1.08 ; 40 °C inlet = 0.81 ; 30 °C ambient = 0.95.
2) Calculate the required capacity: 1.08 x 0.81 x 0.95 = 0.83; 500/0.83 = 602 m3/h ; 602 / 60 = 10 m3/min.
3) Select the model which corresponds to the calculated capacity. It is acceptable to overload a model by 10 %:
a. If the requested air flow is intended to be the inlet flow to the dryer, select model ATT090. This model can nominally treat
9.0m3/min inlet flow (loading it with 10m3/min is acceptable approx. 10 % more).
b. If the requested air flow is intended to be the treated air flow at the output of the dryer, than select a larger model ATT140.
Model ATT090 can deliver 8.7m3/min at the output, so requiring 10m3/min would be almost 15 % more than its rated perfor-
mance. In this case the next model must be selected.
4) If the requirement is for a different dew-point, the selection procedure does not alter. The required pressure dew-point does
not affect the model selection. It impacts only on the total power used by the selected model.
 Product Specification
Antares dryer ATT 025-340 with Tandem Technology

Factor to calculate the power consumption of an ATT model at

pressure dew-point values which deviate from -40 °C and/or at partial load
Pressure Dew-point (°C) Refrig. only +3 0 -10 -20 -40 -70
Correction Factor 0.39 0.88 0.89 0.90 0.92 1 1.31

Partial Load 25 % 50 % 75 % 100 %

Correction Factor 0.66 0.82 0.94 1
Correction Factor
0.52 0.76 0.90 1
Refrigeration-circuit only 1
1
(ATT140-260-340 only)

Example: ATT140 working at -20 °C pdp and loaded with 50 % of its nominal capacity

1) Find the correction factor in the table above: -20 °C pdp = 0.92 ; 50 % load = 0.82.
2) The total power at nominal conditions consumed by model ATT140 (see performance table) is: 2.01 + 2.37= 4.38kW.
3) Apply the correction factor. The total power consumed at the new conditions is: 4.38 x 0.92 x 0.82 = 3.30kW.

Example: ATT140 with seasonal “By-pass Option” (Refrigeration-circuit only active), unit loaded at 50%

1) Find the correction factor in the table above: Refrigeration-circuit only = 0.39 ; 50 % load with refrigeration-circuit only = 0.76.
2) Apply the correction factor to the total power consumed by an ATT140. The new value is: 4.38 x 0.39 x 0.76 = 1.3kW.

Air quality classes, in accordance with ISO 8573-1:2010

Particulate Class 2
Humidity (gaseous) From Class 4 to Class 1 (depending upon dew-point setting)
Total oil contamination Class 2
Product Specification
Antares dryer ATT 025-340 with Tandem Technology

Dimensions in mm, weight in kg

Model A - Width B - Height C - Dept Weight
ATT 025 706 1064 1246 180
ATT 040 706 1064 1246 200
ATT 060 806 1214 1416 295
ATT 090 806 1214 1416 335
ATT 140 1007 1586 1345 490
ATT 260 1007 1720 2535 880
ATT 340 1007 1720 2535 950

A
A A A

C C
B B
B C B C

ATT025 & ATT040 ATT060 & ATT090 ATT140 ATT260 & ATT340

Product key
Electrical Max Optional Optional
Inlet Condensate Optional Optional
Voltage, Operating by-pass Ambient
Series Flow rate * 10 Condenser Drain Touch ModBus
phase, Pressure winter/ temperature
(m3/min) Type screen Interface
frequency (barg) summer Probe
ATT 025 to 040 A 230 1 50 16 TI or EX - - - -
ATT 060 to 090 A or W 230 1 50 12 TI or EX TB - TP C
ATT 140 to 340 A or W 400 3 50 12 EI TB TS TP C

Examples
ATT 040 A 230150 16 TI
ATT model for 4 m /min inlet, air cooled, 230 V, 1-phase, 50Hz power supply, max 16barg operating pressure, equipped with integral timed
3

condensate drain.
ATT 040 A 230150 16 EX
ATT model for 4 m3/min inlet, air cooled, 230 V, 1-phase, 50Hz power supply, max 16barg operating pressure, equipped with external electronic
capacitive condensate drain.
ATT 260 A 400350 12 EI TS
ATT model for 26 m3/min inlet, air cooled, 400 V, 3-phase, 50Hz power supply, max 12barg operating pressure, equipped with integral electronic
capacitive condensate drain and 7“ touch screen display.
ATT 140 A 400350 12 EI TB TS
ATT model for 14 m3/min inlet, air cooled, 400 V, 3-phase, 50Hz power supply, max 12barg operating pressure, equipped with integral electronic
capacitive condensate drain, seasonal “By-Pass” and 7" touch screen display.
ATT 340 A 400350 12 EI TS TP C
ATT model for 34 m3/min inlet, air cooled, 400 V, 3-phase, 50Hz power supply, max 12barg operating pressure,
equipped with capacitive condensate drain, 7" touch screen display, ambient temperature probe and ModBus communication interface.
 Parker’s Motion & Control Technologies
At Parker, we’re guided by
a relentless drive to help
our customers become more
productive and achieve
higher levels of profitabil-
Aerospace Climate Control Electromechanical Filtration
ity by engineering the best Key Markets Key Markets Key Markets Key Markets
systems for their require- Aftermarket services Agriculture Aerospace Aerospace
Commercial transports Air conditioning Factory automation Food & beverage
ments. It means looking at Engines Construction Machinery Life science & medical Industrial plant & equipment
customer applications from General & business aviation Food & beverage Machine tools Life sciences
Helicopters Industrial machinery Packaging machinery Marine
many angles to find new Launch vehicles Life sciences Paper machinery Mobile equipment
ways to create value. What- Military aircraft Oil & gas Plastics machinery & converting Oil & gas
Missiles Precision cooling Primary metals Power generation &
ever the motion and control Power generation Process renewable energy
Semiconductor & electronics
technology need, Parker has Regional transports Refrigeration Textile Process
Unmanned aerial vehicles Transportation Wire & cable Transportation
the experience, breadth of Water Purification
product and global reach Key Products Key Products Key Products
Control systems & Accumulators AC/DC drives & systems Key Products
to consistently deliver. No actuation products Analytical gas generators
Advanced actuators Electric actuators, gantry robots
company knows more about Engine systems CO2 controls & slides Compressed air filters & dryers
& components Electrohydrostatic actuation systems
Electronic controllers Engine air, coolant, fuel & oil filtration systems
motion and control technol- Fluid conveyance systems Electromechanical actuation systems Fluid condition monitoring systems
& components Filter driers
ogy than Parker. For further Fluid metering, delivery Hand shut-off valves Human machine interface Hydraulic & lubrication filters
& atomization devices Heat exchangers Linear motors Hydrogen, nitrogen & zero
info call 00800 27 27 5374 Stepper motors, servo motors, air generators
Fuel systems & components Hose & fittings
drives & controls Instrumentation filters
Fuel tank inerting systems Pressure regulating valves
Structural extrusions Membrane & fiber filters
Hydraulic systems Refrigerant distributors
& components Safety relief valves Microfiltration
Thermal management Smart pumps Sterile air filtration
Wheels & brakes Solenoid valves Water desalination & purification filters &
Thermostatic expansion valves systems

Fluid & Gas Handling Hydraulics Pneumatics Process Control Sealing & Shielding
Key Markets Key Markets Key Markets Key Markets Key Markets
Aerial lift Aerial lift Aerospace Alternative fuels Aerospace
Agriculture Agriculture Conveyor & material handling Biopharmaceuticals Chemical processing
Bulk chemical handling Alternative energy Factory automation Chemical & refining Consumer
Construction machinery Construction machinery Life science & medical Food & beverage Fluid power
Food & beverage Forestry Machine tools Marine & shipbuilding General industrial
Fuel & gas delivery Industrial machinery Packaging machinery Medical & dental Information technology
Industrial machinery Machine tools Transportation & automotive Microelectronics Life sciences
Life sciences Marine Nuclear Power Microelectronics
Marine Material handling
Mining
Key Products Offshore oil exploration Military
Mining Oil & gas Oil & gas
Oil & gas Air preparation
Mobile Pharmaceuticals Power generation
Power generation Brass fittings & valves
Oil & gas Power generation Renewable energy
Refuse vehicles Manifolds
Renewable energy Pulp & paper Telecommunications
Renewable energy Pneumatic accessories
Transportation Pneumatic actuators & grippers Steel Transportation
Truck hydraulics Water/wastewater
Turf equipment Pneumatic valves & controls
Key Products Quick disconnects Key Products
Check valves Rotary actuators Key Products Dynamic seals
Connectors for low pressure
Key Products Rubber & thermoplastic hose Analytical Instruments Elastomeric o-rings
fluid conveyance Accumulators & couplings Analytical sample conditioning Electro-medical instrument
Deep sea umbilicals Cartridge valves Structural extrusions products & systems design & assembly
Diagnostic equipment Electrohydraulic actuators Thermoplastic tubing & fittings Chemical injection fittings EMI shielding
Hose couplings Human machine interfaces Vacuum generators, cups & sensors & valves
Hybrid drives Extruded & precision-cut,
Industrial hose Fluoropolymer chemical fabricated elastomeric seals
Hydraulic cylinders delivery fittings, valves
Mooring systems & High temperature metal seals
power cables Hydraulic motors & pumps & pumps
Hydraulic systems Homogeneous & inserted
PTFE hose & tubing High purity gas delivery elastomeric shapes
Hydraulic valves & controls fittings, valves, regulators
Quick couplings Medical device fabrication
Hydrostatic steering & digital flow controllers
Rubber & thermoplastic hose & assembly
Integrated hydraulic circuits Industrial mass flow meters/
Tube fittings & adapters Metal & plastic retained
Power take-offs controllers
Tubing & plastic fittings Power units composite seals
Permanent no-weld tube fittings
Rotary actuators Shielded optical windows
Precision industrial regulators
Sensors & flow controllers Silicone tubing & extrusions
Thermal management
Process control double
block & bleeds Vibration dampening
Process control fittings, valves,
regulators & manifold valves
Parker Worldwide

Europe, Middle East, Africa IE – Ireland, Dublin North America

Tel: +353 (0)1 466 6370
AE – United Arab Emirates, [email protected] CA – Canada, Milton, Ontario
Dubai Tel: +1 905 693 3000
Tel: +971 4 8127100 IT – Italy, Corsico (MI)
Tel: +39 02 45 19 21 US – USA, Cleveland
[email protected]
[email protected] Tel: +1 216 896 3000
AT – Austria, Wiener Neustadt
Tel: +43 (0)2622 23501-0 KZ – Kazakhstan, Almaty
[email protected] Tel: +7 7272 505 800 Asia Pacific
[email protected]
AT – Eastern Europe, Wiener AU – Australia, Castle Hill
Neustadt NL – The Netherlands, Oldenzaal Tel: +61 (0)2-9634 7777
Tel: +43 (0)2622 23501 900 Tel: +31 (0)541 585 000
CN – China, Shanghai
[email protected] [email protected]
Tel: +86 21 2899 5000
AZ – Azerbaijan, Baku NO – Norway, Asker
HK – Hong Kong
Tel: +994 50 2233 458 Tel: +47 66 75 34 00
Tel: +852 2428 8008
[email protected] [email protected]
IN – India, Mumbai
BE/LU – Belgium, Nivelles PL – Poland, Warsaw
Tel: +91 22 6513 7081-85
Tel: +32 (0)67 280 900 Tel: +48 (0)22 573 24 00
[email protected] [email protected] JP – Japan, Tokyo
Tel: +81 (0)3 6408 3901
BY – Belarus, Minsk PT – Portugal, Leca da Palmeira
Tel: +375 17 209 9399 Tel: +351 22 999 7360 KR – South Korea, Seoul
[email protected] [email protected] Tel: +82 2 559 0400
CH – Switzerland, Etoy RO – Romania, Bucharest MY – Malaysia, Shah Alam
Tel: +41 (0)21 821 87 00 Tel: +40 21 252 1382 Tel: +60 3 7849 0800
[email protected] [email protected] NZ – New Zealand, Mt Wellington
CZ – Czech Republic, Klecany RU – Russia, Moscow Tel: +64 9 574 1744
Tel: +420 284 083 111 Tel: +7 495 645-2156 SG – Singapore
[email protected] [email protected] Tel: +65 6887 6300
DE – Germany, Kaarst SE – Sweden, Spånga TH – Thailand, Bangkok
Tel: +49 (0)2131 4016 0 Tel: +46 (0)8 59 79 50 00 Tel: +662 186 7000-99
[email protected] [email protected]
TW – Taiwan, Taipei
DK – Denmark, Ballerup SK – Slovakia, Banská Bystrica Tel: +886 2 2298 8987
Tel: +45 43 56 04 00 Tel: +421 484 162 252
[email protected] [email protected]
ES – Spain, Madrid SL – Slovenia, Novo Mesto South America
Tel: +34 902 330 001 Tel: +386 7 337 6650 AR – Argentina, Buenos Aires
[email protected] [email protected] Tel: +54 3327 44 4129
FI – Finland, Vantaa TR – Turkey, Istanbul BR – Brazil, Sao Jose dos Campos
Tel: +358 (0)20 753 2500 Tel: +90 216 4997081 Tel: +55 800 727 5374
[email protected] [email protected]
CL – Chile, Santiago
FR – France, Contamine s/Arve UA – Ukraine, Kiev Tel: +56 2 623 1216
Tel: +33 (0)4 50 25 80 25 Tel +380 44 494 2731
[email protected] [email protected] MX – Mexico, Apodaca
Tel: +52 81 8156 6000
GR – Greece, Athens UK – United Kingdom, Warwick
Tel: +30 210 933 6450 Tel: +44 (0)1926 317 878
[email protected] [email protected]
HU – Hungary, Budapest ZA – South Africa, Kempton Park
Tel: +36 1 220 4155 Tel: +27 (0)11 961 0700
[email protected] [email protected]

© 2017 Parker Hannifin Corporation. All rights reserved. BULATT-03-EN

EMEA Product Information Centre

Free phone: 00 800 27 27 5374
(from AT, BE, CH, CZ, DE, DK, EE, ES, FI, FR, IE, IL,
IS, IT, LU, MT, NL, NO, PL, PT, RU, SE, SK, UK, ZA)
US Product Information Centre
Toll-free number: 1-800-27 27 537
www.parker.com/gsfe Your local authorized Parker distributor