Section D Shop Supplies PDF

Setup, Maintenance & Shop Supplies
Section D Contents
A F M
Abrasives Fans ............................................................306–307 Mancoolers Misting Barrels.............................. 307
Cloth Rolls.................................................. 314 Files .................................................................... 312 Mill Files............................................................. 312
Cloth Sheets............................................... 314 Filter Regulators................................................ 345 Mold Hammers.................................................. 332
Copper Gauze............................................. 315 Flashlights.......................................................... 340 Mold Tools, Brass............................................... 329
Hand Pads..........................................312–313 H N
Stainless Steel Gauze................................. 315 Hand Brushes, Brass.......................................... 318 Nozzle Wrenches................................................ 333
Air Circulators.................................................... 306 Handheld Counter............................................. 311 Nut Driver Sets.................................................. 337
Allen Wrenches..................................336–337; 436 Hand Pads...................................................312–313 P
Anti-Static Tinsel............................................... 320 Hand Tools Packing Clips...................................................... 311
B Allen Wrenches.......................................... 336 Pen Lights........................................................... 340
Ball Pein Hammers............................................. 333 Ball Pein Hammers.................................... 333 Pick & Hook Set................................................. 339
Barrel Cleaning Brushes............................316–317 Brass Hand Tools...............................328–329 Plastic Scoops..................................................... 310
Bench Weigh Scales............................................ 310 Bronze Sprue Pullers................................. 330 Pneumatic Filtration.......................................... 346
Bend-A-Light...................................................... 340 "C" Clamp Set............................................. 335 Pneumatic Tools.........................................341–342
Blow Guns..................................................343–344 Dead Blow Hammers................................. 332 Pry Bars.............................................................. 331
Box Flap Clips..................................................... 311 Duct Tape................................................... 335 Q&R
Brass Brushes..................................................... 318 Files............................................................ 312 Qclips.................................................................. 311
Brass End Brushes............................................. 318 Heat Guns..........................................321–326 Rubber Mallets................................................... 333
Brass Hand Tools.......................................328–329 Hex Key Wrench Sets........................338–339
S
Bronze Sprue Pullers.......................................... 330 Industrial Torches...................................... 327
D
Scoops................................................................. 310
Brushes Mold Hammers.......................................... 332
ScotchBrite Hand Pads...................................... 313
Brass End Brushes..................................... 318 Mold Tools Brass....................................... 329
Scrapers Brass.................................................... 328
Brass Hand................................................. 318 Nozzle Wrenches....................................... 333
Screw Drivers..................................................... 334
Barrel Cleaning..................................316–317 Nut Driver Sets.......................................... 337
Scrubbing Sponges............................................. 312
Condenser Cleaning.................................. 317 Pick & Hook Set......................................... 339
Self Igniting Torches.......................................... 327
Holders....................................................... 317 Plastic Scoops............................................. 310
Socket Sets......................................... 334; 341-342
Thread Cleaning......................................... 317 Pneumatic Tools................................341–342
Sprue Pullers, Bronze......................................... 330
Tube............................................................ 319 Pry Bars...................................................... 331
Stainless Steel Gauze......................................... 315
C Rubber Mallets........................................... 333
Stop Watches...................................................... 311
"C" Clamp Set..................................................... 335 Screw Drivers............................................. 334
Socket Sets.........................................341; 342 T
Cleaning
Sprue Pullers Bronze................................. 330 Tally Counters.................................................... 311
Copper Gauze............................................. 315
Tape Measure............................................. 339 Tape Measure..................................................... 339
Pads....................................................312–313
Telescoping Magnet................................... 339 Telescoping Magnet........................................... 339
Scrubbing Sponges.................................... 312
Telescoping Mirror.................................... 335 Telescoping Mirror............................................. 335
Stainless Steel Gauze................................. 315
Torque Wrenches....................................... 336 Thread Cleaning Brushes.................................. 317
Compact Weigh Scales....................................... 309
Tweezers..................................................... 334 Torque Wrenches............................................... 336
Copper Gauze..................................................... 315
Wrench Set................................................. 336 Triple Beam Balances......................................... 308
Counters
Heat Guns...................................................321–326 Tube Brushes...................................................... 319
Desktop...................................................... 311
Heat Sealers........................................................ 347 Tweezers............................................................. 334
Handheld.................................................... 311
Hex Key Wrench Sets.................................338–339 W
D
I Weigh Scales...............................................308–310
Dead Blow Hammers......................................... 332
Industrial Torches.............................................. 327 Wrenches............................................................ 336
Desiccant............................................................ 346
Desktop Counter................................................ 311 L
Duct Tape........................................................... 335 Laboratory Weigh Scales................................... 309
E Levels.................................................................. 334
End Brushes....................................................... 318
U.S. 800-626-6653 • Canada 800-387-6600 • Mexico 52-442-7135666 • Worldwide +1-248-398-6000 305

[email protected] • www.dme.net/industrialsupplies • DME price list: www.dme.net/prices
Air Circulators
Commercial Air Circulators

••115V, ⁄ HP, 3-speed, totally enclosed single-phase motor
1
4
••Four mounting options

••Steel propeller
••CFM range from 2520 to 6100
••Sized from 18” to 30”
Part Number Description
CA30APE Commercial 30” fan with adjustable pedestal
CA30WC Commercial 30” fan with wall mount bracket
Pivot Stand & Work Station Fans

••115V, 3 speed, ODP motors
••18” fans blades
••Chrome-plated tubular steel frame
••Aluminum propellers
I-18LS Low stand 18”
I-18YM Yoke mount 18”
I-18HS High stand 18”
Fan types (High Stand,
Low Stand, Yoke Mount)
18” High Velocity Low Stand

••Totally enclosed, ⁄ HP motor
1
8
••CFM range 4550 to 3346

I-18TELS Enclosed low stand/yoke mount 18”
Portable Utility Blower with Heater Option

••Ready to use
••Up to 300 CFM airflow
••120V, 60Hz, 1.77 AMPs, 3-speed motor
••Adjustable air direction
••Optional heater converts blower to lightweight portable heater
UB180 Red utility blower
HFUB11 Heater attachment for UB180
306 U.S. 800-626-6653 • Canada 800-387-6600 • Mexico 52-442-7135666 • Worldwide +1-248-398-6000

Mancoolers
DME offers a full line of industrial and ventilation fans for roofs and walls, as well
as dozens of other fans for commercial and industrial settings.
Note: Items below have a 1-2 week lead time.
Misting Barrel
••115V, 1/3 HP, indoor/outdoor motor
••3-nozzle misting head
••Variable water output
••Dual point filtering system
••Misting pattern of 60’ x 20’
AMF-30-B Misting Barrel
Direct Drive 4-in-1® Mancooler®

••One fan – four mounting options - ceiling, wall, D
hanging & portable barrel mounts
••115V, 1 phase, direct drive, totally enclosed air over
(TEAO) motor
••Epoxy-coated guards, barrel, & mounts
••36” fan
••CFM range from 3410 to 11,200
DD3641 4-in-1 Mancooler
Belt Drive Portable Mancoolers®

EMC42D MC420S
••115V, belt drive, ODP motor ••Motor out of airstream
••Deep-spun venturi & deep-pitched ••Locking casters
blades
••Epoxy-coated steel spiral,
••Pull handles vibration isolation guards
••Epoxy-coated barrel, propellers ••Quiet – dB: high 75, low 67
& guards

EMC42D 42”
MC420S 42”

Plastic Scoops

PS1 2 ⁄2 Cup Scoop
1
PS2 9 Cup Scoop
Packaging Clips
Streamline your packaging with Quality Clips™
••Completely removable and reusable. Better than tape,

it won’t mark your boxes or leave residue.
••Prevents tipped or spilled boxes due to loose box flaps.
••Great for bulk packaging. Parts will not hang up on the
smooth, flat surfaces or the tapered end.
••Maximize your workspace. Workers can stand closer to the
box creating space in assembly line and manufacturing areas.
No more leaning or reaching.
Quality Clips®
QUANTITY
DISCOUNT
Part Number
Discount applies to
QCLIPS current pricing:
51–100 less 4%
101–500 less 9%
501 or more less 13%

Stop Watches
Pro Survivor™ Series Stopwatch

••Large display - easy to read
••24 hour stopwatch
••Range in 6 digits
••Water & shock resistant
••Alarm, chime and calendar
••Bright yellow color - easy to see!
••Resolution of 1/100 second
••Time cumulative splits
••Lanyard included
Part No. A601XY
Tabletop Digital Timer

••Large 1” display ••Alarm and calendar
••10 hour timing range ••Resolution of
••
••
Range in 6 digits
Countdown timer
1/100 second
••Time cumulative splits D
w/alarm Part No. AE520S
Tally Counters
Hand Tally Counter Four Digit

••Chrome-plated metal
construction
••Finger lever and reset
knob for easy hand use
Part No. TC600A
Desktop Tally Counter Four Digit

••Chrome-plated metal construction
••With flange 2” dia. for desktop
mounting
••Recording lever and reset knob
Part No. TC600B

Mill Files
Mill Files - Square Edges

Shape: Tapered slightly in width. Sides and edges are single cut.
Use: This is the most commonly used file in the U.S. It is suitable for quick removal of stock from plain
surfaces. Works on all metals and plastics.
Bastard 2nd Cut Smooth

Overall Size
Part Part Part
Length (Width × Thickness)
Number Number Number
4” 7
⁄16” × 5⁄64” MBF4 MSF4
6” 20
⁄32” × 7⁄64” MBF6 M2F6
8” 12
⁄16” × 5⁄32” MBF8 M2F8 MSF8
10” 1” × 3⁄16” MBF10 M2F10 MSF10
12” 13⁄16” × 7⁄32” MBF12 M2F12 MSF12
14” 111⁄32” × 1⁄4” MBF14 MSF14
Flat files, half round files, knife files, round files, square files, warding files, three-square files and special
requests; please call DME for pricing.
3M ScotchBrite® Scrubbing Sponges

••Light-duty scrubbing sponge
••Removes stubborn stains & dirt buildup
••3.69” × 6.13”
••20 sponges per case
Part Number 74
Nylon Hand Pads

••Made from three dimensional, non-woven nylon webs impregnated with
abrasive materials
••Very durable; resist tearing splintering, loading and shredding
••Can be rinsed for reuse
••Provides a clean, contaminate-free surface that will improve adhesion
of all types of coatings
••Also available in rolls
••Satisfaction guaranteed with this fine product and our low prices!
Pads are 6” × 9”
Pads/ QUANTITY
Equal Color Cut Pack
Number DISCOUNT
NS7448 7448 Gray Ultra-Fine 20 Discount applies to
NS7447 7447 Maroon General Purpose - Fine 20 current pricing:
NS7446 7446 Green General Purpose - Regular 20 100–499 less 2%

500 or more less 4%
NS7440 7440 Tan Extra Heavy Duty 20

Industrial Hand Pads
ScotchBrite™ Light Duty Cleansing Pad

With its very mild abrasive, this pad is commonly
used with liquid detergents for gentle but
thorough cleaning of porcelain, stainless steel,
chrome, painted surfaces and glass.
Part #7445 White (20 pads per box)
ScotchBrite™ Ultra-Fine Hand Pad
Use this pad when high conformability and an
ultra-fine finish on metals, woods, plastics and
composites is required. It’s just right for cosmetic
cleaning or for creating consistent finishes.
Part #7448 Gray (20 pads per box)
ScotchBrite™ Light Duty Hand Pad
This pad is more aggressive and less conformable
than 7449 and yet provides an ultra-fine finish. It’s ScotchBrite™ Ultra Heavy Duty Hand Pad
ideal for maintenance and repair operations to pre This is 3M’s most aggressive hand pad. Its coarse
pare surfaces for paints, sealers or other coatings.
D
mineral content allows it to cut through the
Part #6448 Gray (20 pads per box) heaviest contaminants and oxides.
ScotchBrite™ General Purpose Hand Pad Size: 4” × 6” (101mm × 152mm).
This pad has set the standard for surface Part #5440 Dark Gray (10 pads/box)
conditioning worldwide. In cleaning, finishing, Insta-Lok® Extra Heavy Duty Hand Block
blending and deburring applications, this hand pad A hand pad holder specially designed for speed
cleans and finishes faster, easier and with better cleaning, finishing and blending. Fabricated of
results than conventional abrasives in an unlimited rugged, long-lasting plastic, the Insta-Lok Hand Block
number of applications. securely grips and holds all ScotchBrite Industrial
Part #7447 Maroon (20 Pads per box) Hand Pads for maximum surface conditioning
ScotchBrite™ Extra Duty Hand Pad results. Accepts pads 6444, 6448, 7440, 7445, 7446,
Much more aggressive than 7447, this pad is ideal 7447 and 7448 after they have been cut in half.
for tough maintenance and repair jobs since it can Part #952
remove heavy contaminants and prepare surfaces ScotchBrite™ General Duty Hand Pad
for coating, painting or sealing. Conforms well to Similar to pad 7447, but this pad has a 30–50%
uneven or irregular surfaces. longer life. Preparation time is also reduced as its
Part #6444 Brown (20 pads per box) special mineral content provides a faster cut, not a
ScotchBrite™ Blending Hand Pad coarser cut. The 6” × 9” pads are perforated to easily
This pad was specially designed for hand blending tear into two 41⁄2” × 6” pads.
and finishing of stainless steel. It contains a Part #8447 (20 pads per box)
coarser mineral than the 6444 and can be used to ScotchBrite™ MultiFlex Abrasive Sheets
blend away surface scratches on many other metal, Provides a lower-cost, high performance alternative
wood and synthetic surfaces. to conventional abrasives. They are tough, highly
Part #7446 Gray (10 pads per box) conformable sheets that can be used by hand or with
ScotchBrite™Heavy Duty Hand Pad handheld tools to produce a consistent burr-free
A high mineral content makes these pads cut fast finish. Convenient dispenser pack contain 60 sheets
to remove contaminants and oxides in your most (8” × 4”) per roll.
demanding cleaning and finishing tasks. Part #7522 Gray/Grade S-ULF
Part #7440 Tan (10 pads per box) Part #7521 Purple/Grade A-VFN
Abrasive Cloth Rolls
Abrasive Cloth Rolls from DME Industrial Supplies are aluminum

oxide on a flexible cloth backing for all sorts of cleaning and
deburring. Rolls are easy to dispense as needed and will work
hard so you can work easy.
!
New
All Abrasive Cloth Rolls are 50 yards long!
1” WIDE 11⁄2” WIDE 2” WIDE

Part Part Part
Grit Grit Grit
Number Number Number
10UR060 60 15UR060 60 20UR060 60
10UR080 80 15UR080 80 20UR080 80
10UR100 100 15UR100 100 20UR100 100
10UR120 120 15UR120 120 20UR120 120
10UR150 150 15UR150 150 20UR150 150
10UR180 180 15UR180 180 20UR180 180
10UR240 240 15UR240 240 20UR240 240
10UR320 320 15UR320 320 20UR320 320
Abrasive Cloth Sheets

Aluminum Oxide
••Waterproof Better than the competition!
••9” × 11” sheets Our Aluminum Oxide Sheets
••Finest quality are stronger cloth-backed
sheets, not paper!
••Lowest prices!
Part
Grit
Number
CS35251003 80
CS35251004 100
CS35251005 120
CS35251006 150
CS35251007 180
CS35251008 220
CS35251009 240
CS35251010 320
CS35251011 400

Copper Gauze
••Reversible for heavy-duty cleaning ••Tough interlocking loops - won’t pull apart!
•• Choose copper for safe non-scratch cleaning or ••Two weights to choose from -
stainless for more aggressive heavy-duty cleaning. −−Economy grade & stainless - .002” × .010 wire
••5” wide in 100 or 400 foot rolls −−Regular grade copper - .002” × .019” wire
Part Reference
Width Length
Number Number
Economy Copper Gauze
QUANTITY
LCG100 – 5” 100’
DISCOUNT
Regular Copper Gauze
Discount applies to
MCG100 CG1 5” 100’ current pricing:
MCG400 CG4 5” 400’ 5 or more less 2%
Stainless Steel Gauze Type 304
SSG100 – 5” 100’
Efficient Cleaning of Screws and Barrels Using Copper Gauze and Grease in Eight Steps
Step 1
Clean the extruder with a purging compound. Then,
Step 6
Remove screw almost out of barrel. Copper gauze D
clean the die face with small ball of copper gauze that should be “walked down” as the screw is being pulled
has some silicone grease on it. Also, clean valve while out. Screw is now clean. (Note that operations 5 & 6
still hot. take only 5 minutes).
Step 2 Step 7
Remove the die from the extruder head. This is To clean barrel, wrap copper gauze around a round
best cleaned by forcing silicone-coated copper gauze wire brush at end of long rod and pass through barrel.
through it, using a wooden dowel. Then, chuck rod into power drill, insert fresh gauze
Step 3 and pass back and forth through barrel until clean.
Once the gauze has been passed through the die, Step 8
it can be pulled back and forth to complete the You’re now ready to reassemble and get back into
cleanup. production. Be sure to lightly coat copper gauze with
Step 4 silicone grease for all operations.
Ensure that the die is thoroughly cleaned,
with no residual trace of adhered plastic,
nor a scratch on the metal surfaces.
Step 5
Partially remove the hot screw, wrap silicone
grease coated gauze 2 or 3 times around screw
and use “shoe shine” motion. Intermittently
relax tension so gauze can be “walked down”
the screw.
Refer to Section H
Page 681 for info
on Silicone Grease!

Barrel Brushes
Barrel Cleaning Brushes
Barrel Cleaning Brushes

••Double spiral carbon steel
••Brush length: 4 ⁄ ” 1
2
••Overall length: 8” High Carbon

•• ⁄ ” NPT nipple
1
4 Double Spiral
Inch Sizes Metric Sizes

Part Part
Diameter Wire Size Diameter Wire Size
Number Number
BCB075 ⁄4”
3
.012 BCB18M 18 MM .012
BCB100 1” .012 BCB22M 22 MM .012
BCB125 11⁄4” .012 BCB24M 24 MM .012
BCB150 11⁄2” .012 BCB27M 27 MM .012
BCB175 13⁄4” .012 BCB30M 30 MM .012
BCB200 2” .012 BCB32M 32 MM .012
BCB225 21⁄4” .012 BCB35M 35 MM .012
BCB250 21⁄2” .012 BCB38M 38 MM .012
BCB275 23⁄4” .012 BCB40M 40 MM .012
BCB300 3” .012 BCB45M 45 MM .012
BCB325 31⁄4” .012 BCB50M 50 MM .012
BCB350 31⁄2” .012 BCB55M 55 MM .012
BCB375 33⁄4” .012 BCB57M 57 MM .012
BCB400 4” .012 BCB60M 60 MM .012
BCB450 41⁄2” .012 BCB65M 65 MM .012
BCB600 6” .012 BCB67M 67 MM .012
BCB70M 70 MM .012
BCB80M 80 MM .012
BCB90M 90 MM .012
BCB105M 105 MM .012
BCB115M 115 MM .012
Extension Rods
FER3* 3’ Fiberglass Extension
TER3* 3’ Twisted Wire Extension
HER3 Handle For Ext. Rods
* Rods can be connected end to end for longer reach

Barrel Brushes
Part Brush Overall Wire

Number Dia. Length Size
Power-Driven Single Spiral - Brass
BCB250PD 1
⁄4” 12” .005
BCB375PD 3
⁄8” 12” .005
BCB500PD 1
⁄2” 12” .006
BCB750PD 3
⁄4” 12” .010
Power-Driven Double Spiral - Brass
BCB250PDD 1
⁄4” 12” .003
BCB375PDD 3
⁄8” 12” .003
BCB500PDD 1
⁄2” 12” .004 Power-Driven
Single Spiral
BCB750PDD 3
⁄4” 12” .060
Power-Driven
Condenser Cleaning Brush - Brass Double Spiral
CCB0375 3
⁄8” 41⁄2” 71⁄2”
CCB0500 1
⁄2” 41⁄2” 71⁄2” 24” or 36” extension
CCB0625 5
⁄8” 41⁄2” 71⁄2” rod - optional
CCB0750 3
⁄4” 41⁄2” 71⁄2” T-handle Condenser
CCB1000 1” 41⁄2” 71⁄2” Brush & Extension
Rods
CCB24 EXTENSION ROD - 24”
Handle
1
⁄8” NPT external -
D
CCB36 EXTENSION ROD - 36” 5
⁄16” - 18 internal
CCBH HANDLE FOR RODS
Thread Cleaning Brushes

The perfect brushes for cleaning and polishing threads, inner walls of tubes and cylinders. Solid concentration
of bristles provides a high degree of bristle stiffness with little flexing of bristles during operation. For use in
power tools. Use holder to run at a higher RPM. Choose high-carbon steel or brass.
Thread Cleaning Brushes
Brass High Carbon Steel
Brush Overall Wire Fits Holder
Part Part
Dia. Length Size Number
Number Number
1
⁄4” 2–1⁄8” .005 TCB250 TCS250 TCH1
3
⁄8” 2–1⁄8” .008 TCB375 TCS375 TCH1
1
⁄2” 2–1⁄8” .008 TCB500 TCS500 TCH2
5
⁄8” 2–1⁄4” .008 TCB625 TCS625 TCH2
3
⁄4” 2–1⁄4” .008 TCB750 TCS750 TCH2
7
⁄8” 2–1⁄4” .008 TCB875 TCS875 TCH2
1” 2–1⁄4” .008 TCB1000 TCS1000 TCH2
1–1⁄8” 2–1⁄4” .008 TCB1125 TCS1125 TCH2
1–1⁄4” 2–1⁄4” .008 TCB1250 TCS1250 TCH2
Interchangeable with competitors’ models
Brush Holders
Part Shank Dia. Stem
Number Dia. Brush End Size
TCH1 1
⁄4” 1
⁄4” .099
TCH2 1
⁄4” 3
⁄8” .150

Brass Brushes
High-Quality Brass Hand Brushes
••For light cleaning and polishing Part Number Block Size Number of Rows
for metal finishing, plating and HB401 13 × 11⁄8” 4
general industrial applications HB402 10 × 11⁄8” 4
•• Carved wood handles HB403 85⁄8 × 5⁄8” 2×9
HB404 73⁄4 × 1⁄2” 3×7
HB404S* 73⁄4 × 1⁄2” 3×7
HB405 31⁄4 × 11⁄8” 4 × 11
*All brushes except HB404S have brass bristles. HB404S has steel bristles!
HB401
HB402
HB403
HB404
Brass Solid End Brushes

Part Brush Wire
Number Diameter Size
SEB0500 1
⁄2” .010
SEB0750 3
⁄4” .010
SEB1000 1” .010
Copper Center Brass Brushes

Part Brush Wire
Number Diameter Size
CCB200 2” .006
CCB300 3” .006
CCB400 4” .006
CCB3K 3 Brush Kit - 2”, 3” 4”

CCBD 1
⁄4” Shank Driver

Tube Brushes
Highly-efficient brushes for cleaning:

••Condenser tubes
••Cartridge heater holes
••Ejector pin holes
••Mold cavity holes
Brass Tube Brushes
Part Number Brush Diameter Overall Length Wire Size
BTB0062 1
⁄16” 4” .003
BTB0125 1
⁄8” 6” .003
BTB1875 3
⁄16” 7” .003
BTB2500 1
⁄4” 7” .003
BTB3125 5
⁄16” 7” .004
BTB3750 3
⁄8” 8” .006
BTB4375 7
⁄16” 8” .006
BTB5000 ⁄2” 8” .006
D
1
BTB5625 9
⁄16” 9” .005
BTB6250 5
⁄8” 9” .005
BTB6875 11
⁄16” 9” .005
BTB7500 3
⁄4” 9” .005
BTB8125 13
⁄16” 10” .005
BTB8750 7
⁄8” 10” .005
BTB9375 15
⁄16” 10” .005
BTB1000 1” 10” .005
Nylon Tube Brushes

Part Number Diameter Brush Part Overall Length Filament Diameter
NTB187 3
⁄16” 2 ⁄4”
1
6 ⁄4”
3
.006
NTB250 1
⁄4” 2 ⁄2”
1
10” .008
NTB312 5
⁄16” 2 ⁄2”
1
12” .008
NTB500 1
⁄2” 3” 81⁄2” .010
NTB625 5
⁄8” 4” 12” .008
NTB750 3
⁄4” 4” 12” .008
NTB875 7
⁄8” 4” 16” .020
NTB1000 1” 4” 24” .016
NTB1250 11⁄4” 4” 12” .020
NTB1500 11⁄2” 4” 24” .020
NTB2000 2” 4” 24” .020

Anti-Static Copper Tinsel
••100% copper
••No power needed
••Pennies per foot
Proven through over 50 years of success to be the most effective low-cost, low-maintenance passive static
electricity eliminator available, Anti-Static Tinsel is one of the most widely used methods of static control.
Anti-Static Tinsel from DME Industrial Supplies is 100% ultra conductive copper strands, and eliminates
static through the “self-energizing” or inductive principle. The core is made of multiple copper wires (not
string) to ensure positive grounding and strength. The fine, sharply pointed copper strands provide greater
static elimination. The conductive strands are interspersed to maximize effectiveness, but are not so dense as
to make it easy to collect dust and dirt particles. Anti-Static Tinsel resists breakage, matting and shedding.
Multiple Applications
Anti-Static Tinsel is effective in the elimination of static electricity generated by moving webs and conveyors
used in many industries, including printing, converting, paper, plastics, textiles and office equipment. It
works most effectively when placed close but not in contact with the surface to be neutralized.
Anti-Static Tinsel works great when used in winding,

extruding, sheeting, slitting, coating, carding, slashing,
wrapping and folding operations.
The higher the troubling static charges, the more
efficiently the tinsel works.
Tinsel Specifications
100% copper strands and core wires in 1.25” dia. × 36 ft. coils
Part Number: 5020UN
Each box contains 72 ft. of tinsel consisting of two 36 ft. coils

Steinel Heat Guns
With color-coded temperature range keys
Steinel Heat Guns are powerful heat blowers with lightweight ergonomic
design, a soft grip handle and quiet operation for convenient long-term use.
!
Interchangeable temperature keys lock in specific output ranges. Available New
with choice of 1 to 5 color-coded keys for the right temperature every time.
Maintenance-free, factory-sealed motor and high-output turbine fan deliver
up to 23 CFM.
Adjustable quick-lock stand stores keys. Tool removes easily for handheld
operation. Long-life reinforced element with plug-in feature takes only
seconds to change.
High Output
••Powerful turbine blower with
air delivery rate up to 23 CFM
••Color-coded keys for the right
temperature every time
••Maintenance-free, factory-
sealed motor D
Superior Ergonomics
••Lightweight, well balanced
design
••Soft grip handle with
convenient slide switch
Self-cooling aluminum
(Off/Cool/Hot) output tube with mesh Long-life heating element with plug-in feature is quick and easy to change
•• Ultra-quiet operation guard for safety
Convenient Operation Baffle adjusts air and temperature within range
••Plug-in heating element takes

only seconds to change
••Quick-lock stand is fully
adjustable and stores keys
••Available accessories enhance Color-coded keys
each lock in a specific
versatility temperature range
Superior ergonomics
and soft-grip handle
for fatigue-free operation Double insulated for
safe use with all outlets
Plug-in keys are easily interchangeable Slide switch with cool air stage
for rapid cool down

Steinel Heat Guns
With color-coded temperature range keys
Key Color Temperature Range

Blue 200°F – 300°F
Gray 300°F – 500°F
Yellow 500°F – 750°F
Orange 750°F – 1000°F
Red 1000°F – 1200°F
General Specifications
Dimensions (h × w × d).............. 91⁄2” × 5” × 91⁄2” !
Weight.......................................... 2.4 lbs New
Voltage......................................... 120 VAC/60 Hz
Output......................................... 1750 W
Temperature range...................... 200°F – 1200°F (all five keys)
Airflow rate................................. Up to 23 CFM, adjustable baffle
Power cord................................... Industrial grade rubber, 6 ft. length
Quick-Lock Stand
Fully adjustable quick-lock stand conveniently stores temperature keys. Tool removes easily
for handheld operation.
HG1750 Professional Heat Gun Kit
Includes:
Heat gun, all five temperature range color keys, and adjustable quick-lock stand.
Blower
Accessories
Item 1
⁄4” (7mm) Reducer 8” (200mm) Spreader Large Reflector Small Reflector
For films and For shrink tubing For shrink tubing
Usage For pinpoint heat
packaging up to 50mm dia. up to 20mm dia.
Part Number 7695 7725 7705 7715

Steinel Heat Guns
HL1810S
Three-Stage Professional Heat Gun
Multi-purpose heat gun with cool air stage and choice of 2 temperature
settings for convenient handheld or bench work. STEINEL’s exclusive
DuraTherm™ heating element ensures long life and even heat.
For shrink wrapping, activating adhesives, softening compounds,
window tinting, bending plastics and other applications requiring long
life and even heat.
Stage 1: Cool Air Stage, 120°F/3.6 CFM Three-Stage
2: 750°F/10 CFM Switch
3: 1100°F/15.9 CFM
Output: 1400 Watts
Element: DuraTherm™ Ceramic
Voltage: 120 VAC/60 Hz
Warranty: One Year Part Number HL1810S
HL1910E
Variable Temperature Electronic Heat Gun
Powerful heat gun with variable temperature and electronic thermocouple
D
control for flexible use and maximum reliability. STEINEL’s exclusive
DuraTherm™ heating element ensures long life and even heat.
For plastic welding, packaging, automotive, maintenance and other applications
requiring variable temperature or pinpoint reduction of heat output.
Temperature: 120–1100°F Three-Stage
Switch
Stage 1: Cool Air Stage, 120°F/3.6 CFM Voltage: 120 VAC/60 Hz
2: Variable Temp./10.6 CFM Weight: 30 oz.
3: Variable Temp./17.6 CFM Warranty: One Year
Output: 1500 Watts
Element: DuraTherm™ Ceramic Part Number HL1910E Adj. Temp.
Wheel
HG2310LCD
Programmable Intellitemp™ Heat Gun with LCD Display
Programmable heat gun with LOC (Lockable Override Control™)
of temperature and airflow output settings. LCD display enables
temperature selection in 10°F increments.
For use in electronics, aerospace, medical manufacturing and other
applications requiring precision control.
Temperature: 20–1200°F
Airflow: Continuously variable 3.6–17.6 CFM Voltage: 120 VAC/60 Hz
Two-Stage
Switch
Switch: Cool Air Stage, Variable Temp. Weight: 30 oz.
and Airflow Warranty: One Year
Programs: Four Customizable Pre-Set Lockable
Override Non-slip
Temp./Airflow Programs Control Soft Stand
Output: 1600 Watts Temp. and
Element: DuraTherm™ Ceramic Part Number HG2310LCD Airflow Control

Steinel Heat Guns
UltraHEAT™
UltraHEAT™
SV 800 Dual Temperature Heat Gun
This model features a dual temperature switch
and is designed for general intermittent use.
Dual Temperature: Low: 600°F; High: 950°F Output: 1300 Watts
Cool Air Stage: Enables rapid cooldown Voltage: 120 VAC/60Hz
Power Cord: D ouble insulated Certifications: UL/C-UL
for safe operation Warranty: One Year
Part Number SV803
UltraHEAT™ II
SV 803 Variable Temperature Heat Gun
Ultra Heat II is a variable temperature heat gun featuring
2 airflow settings with heat and a selectable cool air stage
for maximum user control. This model also has a soft grip
for comfortable operation.
Variable: Up to 1050°F Output: 1400 Watts
Temperature: Cool air, 140°F Voltage: 120 VAC/60Hz
3 Stage Airflow: Low & High Speed Certifications: UL/C-UL
Power Cord: Double insulated Warranty: One Year
for safe operation
Part Number SV803
UltraHEAT™ Kit
SV 803K Variable Temperature Heat Gun Kit
Kit includes:
•• SV 803 Heat Gun
•• Heavy-duty carrying case
•• 75mm spreader nozzle
•• 39mm reflector nozzle
Part Number SV803K

Steinel Heat Guns
Accessories
Reflector Nozzles
Reflector Nozzles direct hot air around pipes and tubing for
even heating. Use 14mm on ELECTRONIC heat guns only.
14mm Reflector Nozzle Part Number 7461

39mm Reflector Nozzle Part Number 7051
14mm 39mm
Reduction Nozzle
Provides a concentrated stream of hot air for precision
welding or soldering. May be used as a base for specialized
attachments. Use on ELECRONIC heat guns only.
9mm Reduction Nozzle Part Number 7062

D
Wire Protection Tube
Offers added safety by preventing accidental contact
with hot nozzles.
Wire Protection Tube Part Number 7402
Metal Stand
Gun stands offer the flexibility of hands-free operation,
optimum efficiency and maximum safety for most
STEINEL heat guns.
Metal Stand Part Number 1410
Hanger
Overhead hangers offer the flexibility of hands-free operation,
optimum efficiency and maximum safety for most
STEINEL heat guns.
Overhead Security Hanger Part Number 1481

Hyde® Brass Scrapers
2975
2420
12055
2320
12040
2080
Six Models to Choose From! DIG-IT TOOL

Solid brass spring steel scrapers have knife-sharp Scrape, dig, chip, chop, slice & dice! The all brass
front edges that will not nick or damage expensive Dig-It Tool can take it! Takes the place of several
machine components. other tools used for cleaning screws, barrels, tips,
nozzles, etc. Once you get one, you’ll never want
Polished and lacquered full-strength brass scrapers to be without it again. Part Number 2975
are non-sparking, non-corrosive & non-magnetic.
Tough nylon handles are secured to full length

brass blade (except models 12040 & 12055 which
are not full length but extend well into the handle
portion) with large brass grommets.
Keep plenty of these time-savers on hand!
Brass Scrapers
Part Blade Overall
Number Size (W × L) Length
QUANTITY
DISCOUNT
2080 11⁄4” × 35⁄8” 75⁄8”
Discount applies to
2320 2” × 35⁄8” 75⁄8” current pricing:
2420 3” × 45⁄8” 8” 24 or more less 5%
2975 3” × 4 ⁄8”
5
8”
12040 1 ⁄4” × 3 ⁄8”
1 5
11 ⁄2”
1
12055 31⁄8” × 41⁄4” 121⁄2”

Brass Mold Tools
Brass Rod with Replaceable Tips
Brass Rod with Replaceable Tips

Replacement brass tips… 5⁄16” dia. with fine point… when the old one wears out, simply unscrew it and insert
the new one… takes only a few seconds
Tough, permanent 1⁄2” dia. steel rod… anti-rust finish… never wears out.
⁄16” dia. replaceable brass rod… machined to fine point… hand threaded onto permanent steel rod.
5
⁄8” milled flat… for quick, easy tip removal.

3
••Remove frozen sprues

… clean out runners
… a hundred uses!
•• Handle never mushrooms or wears out!
•• Get one for each machine
Part Number
BR1 Complete Set Includes 1 Steel Rod
plus 3 Replaceable Brass Tips D
BR2 Replaceable Brass Tips
Brass Rods and Scrapers

Part Diameter End Length (Including Handle)
Number
HMT0B ⁄8”
1
Straight-Pointed End, 12”
HMT1C 1
⁄4” 90º Bend-Pointed End, 14”
HMT1A 1
⁄4” Straight-Blunt End, 14”
HMT1B 1
⁄4” Straight-Pointed End, 14”
HMT2A ⁄8”
3
Straight-Blunt End, 14”
HMT2B ⁄8”
3
HMT3B ⁄8”
3
HMT3A ⁄8”
3
Straight-Blunt End, 17”
HMT5 – 1
⁄8”× 1” Flat Scraper - Sharp Edge, 12”
HMTZ – Brass Mold Tool Set B
(1 each of items above)

Bronze Sprue Puller Tools
Features:
••Strongest forged bronze alloy - Ampco 45, ••Corrosion resistant for work outdoors, marine use
Alloy 630, AMS 4640 and corrosive environments
••Non scratch - ideal for removing sprues and parts ••Thermal insulating, soft touch foam grip to reduce
without damaging mold surfaces fatigue and CTDs
••Non spark - for work around fuels, solvents and ••Longer double ergonomic handles for high
other flammable chemicals. leverage, less operator force
••Non magnetic - for work around MRIs and magnets ••Easily re-sharpened
BRC9 BRCR9 BRD8 BRDS8 BRG8
BRL8 BRL9 BRS9 BRSL8 BRT8

BRC9 Bronze 9” Curved Nose Pliers
BRCR9 Bronze 9” Pocketed Pliers
BRD8 Bronze 8” Oval Cutters
BRDS8 Bronze 8” Diagonal Oval Cutters
BRG8 Bronze 8” Oval Curved Pliers
BRL8 Bronze 8” Short Nose Pliers
BRL9 Bronze 9” Long Nose Pliers
BRS9 Bronze 9” Shear, Long Grip Combo
BRSL8 Bronze 8” Shear, Cut, Grip Combo
BRT8 Bronze 8” Oval Pliers

Mold Pry Bars
••Heat-treated to Rc 52–54
••Heavy-duty forged steel
••Rust-resistant black oxide
••Preferred by many molders for their toughness 7035
and balance 7032

••Smooth finish tapers
••In-stock at low prices
••Same brand as sold by others... only we charge less! 7025
••Made in U.S.A.
Complete Kit contains one of each tool - Model Number PBK999
For Pry Bars sold separately reference items below
Angle Head Bar Rolling Head Bar Radius Head Bar

QUANTITY
DISCOUNT 20” Long • 5⁄8” Hex 18” Long • 5⁄8” Hex 18” Long • 5⁄8” Hex
Stock Wt. 1 lb. 6 oz. Stock Wt. 1 lb. 9 oz. Stock Wt. 1 lb. 4 oz.
Discount applies to
current pricing: Part Number 7025 Part Number 7032 Part Number 7035
6 or more less 2%
D
Economy Mold Pry Bar w/ Handles
••Heavy duty set, high-alloy steel
••Fully heat-treated
••Lightweight design
••Powerful leverage Part Number
••Comfortable grip PBK400H
••Includes sizes:
8”, 14”, 18”, 24”*
••Lifetime warranty
Rolling Head Pry Bar Set

••Heat-treated chrome-vanadium steel
••Rolling head/pointed head
••Anti-rust black oxide finish
••Align, lift, pry
PBK400 Kit Contains:
1 – 6” OAL, 5⁄16” dia., 2.3 oz.
1 – 12” OAL, 1⁄2” dia., 7.9 oz.
1 – 16” OAL, 5⁄8” dia., 13.7oz.
1 – 20” OAL, 3⁄4” dia., 1.5 lb.
Not Sold Separately

Mold Hammer
Mold Hammer with Interchangeable Tips Special price on the most

•• Tips are removable and interchangeable popular combination:
•• Will not mar metal or plated finish 1” Hammer with 1 Nylon Head & 1 Brass Head
•• Tips available in medium or hard vinyl, Part Number SWH16
tough nylon, brass & steel
•• Non-sparking
•• Non-magnetic
Custom Mold Hammers - Easy to order - first choose a
handle size, then choose the tips which will work best for
your specific application.
Handles
Part Number Size
HH16 1”
HH18 11⁄8”
HH20 11⁄4”
HH24 11⁄2”
Replacable Tips
Part Head R - Red G - Green G - Green
B - Brass
Number Dia. Vinal Med Vinal Hard Vinal Hard
RT16* 1” * * * *
RT18* 11⁄8” * * * *
RT20* 11⁄4” NA * * *
RT24* 11⁄2” NA * * *
*Add R, G, N, B or S to complete part number and indicate tip material
Dead Blow Hammers

Dead Blow Hammers provide the perfect solution to non-marring, non-striking force.
Features:
••Extra-durable As the head strikes the work,
polypropylene casing
the shot moves forward for
••Shot-filled interior for dead blow impact.
more driving force
••Non-marring,
non-sparking
polypropylene casing
•• Textured safety grip
with flanged butt
Part Number Size

DBH10 1 lb.
QUANTITY
DBH15 1.5 lbs.
DISCOUNT
Discount applies to
DBH20 2 lbs. current pricing:
DBH30 3 lbs.
10 or more less 9%
DBH40 4 lbs.

Ball Pein Hammer
••16 oz. size

••Forged and tempered
••Polished
••11” wood handle
••Part Number BH16
Economy Rubber Mallets

••Non-marking
••Large grip, hardwood handles
RMA32 32 oz. 14” OAL, 2¾” dia.
RMA16 16 oz. 12” OAL, 21⁄8” dia.

D
RMA8 8 oz. 10¾” OAL, 15⁄8” dia.
Nozzle Wrenches
Opening Head Wgt. Part
OAL Use with
(A/F) O.D. (lbs.) Number
7
⁄8” 13⁄8” 71⁄2” 0.6 regular tips SFBW1*
1 ⁄16”
1
1 ⁄32”
25
97⁄8” 1.9 extended tips SFBW2
11⁄4” 2” 101⁄4” 2.1 SFBW3
17⁄16” 217⁄64” 109⁄16” 2.6 SFBW4
Six-point box to help 15⁄8” 231⁄64” 11” 2.9 bodies SFBW5
eliminate possible damage 113⁄16” 221⁄32” 11 ⁄16”
5
3.5 SFBW6
to nut. Extra clearance in 2” 31⁄32” 1111⁄16” 4.0 SFBW7
head diameter to facilitate 23⁄16” 39⁄32” 12” 5.2 SFBW8
use with flange connections. 23⁄8” 313⁄32” 123⁄8” 6.0 SFBW9
Heavy duty for use with 29⁄16” 33⁄4” 1211⁄16” 6.6 adaptors SFBW10
hammer for extra tightness 23⁄4” 4 ⁄64”
11
131⁄16” 7.5 SFBW11
or where impact is needed 215⁄16” 423⁄64” 137⁄16” 7.9 SFBW12
to loosen frozen nozzles. 31⁄8” 431⁄64” 1313⁄16” 9.4 SFBW13
*SFBW1 is a 12-point 31⁄2” 431⁄32” 141⁄8” 10.5 SFBW14
wrench. 37⁄8” 535⁄64” 141⁄2” 13.3 SFBW15

Eight Piece Screw Driver Set
••Chrome-vanadium steel Set Includes:

••Vinyl handle - resistant to moisture, Flat 3⁄8” × 8”, 5⁄16”× 6”, 1⁄4” × 4”
3⁄16” × 3 1⁄4” × 11⁄2”
grease, oil and most solvents Phillips #2 × 4”, #1 × 3”,
••Specially heat treated for safety #2 × 1½”
and strength
••Comfortable grip Part Number SD8
Torpedo Level
••3 vials
••Shatter resistant
••Part Number TL9
25 pc. 1⁄2” Drive Socket

Chrome Vanadium Steel
Set Contains:
•• ⁄ ” drive S.A.E.
1
2
18-piece standard 6-point sockets
including: 3⁄8”, 7⁄16”, 1⁄2”, 9⁄16”, 19⁄32”, 5⁄8”, 11⁄16”, 3⁄4”, 25⁄32”, 13⁄16”, 7⁄8”, 15⁄16”,
31
⁄32”, 1”, 1–1⁄16”, 1–1⁄8”, 1–3⁄16” and 1–1⁄4”
•• 6-piece accessories
including - 10” Rachet Handle, 10” Sliding T-bar,
Speeder Handle, Universal Joint, 5” & 10” Extension Bars
•• Plastic case
•• Part Number SK25H
Tweezers
••4-piece set
••Stainless steel
••Perfect for getting parts out of tight spaces!
••Part Number TS4

Silver PVC Duct Tape
“The Handyman’s Secret Weapon!” Red Green Show
••2” × 180’ (60 yards) Part Number RDT180

•• Strong adhesion
••Cloth-backed
••High-tensile strength
••Great for use with dryer and loader hose
••Great value
4 Pc. “C” Clamp Set

••Large steel clamps: 3”, 4”, 5” & 6”
••Bronze-plated alloy steel screw shafts
••Sliding T-handles
Sold separately:
3” - CCP3
4” - CCP4
5” - CCP5
6” - CCP6
D
Set of all four sizes Part Number CCS400
4 & 10 Ton Porta-Powers

••4 & 10 ton
••Excellent for raising and positioning machinery
& parts. Attachments push, pull & lift.
Part Number HRS4K (4 Ton)
Part Number HRS10K (10 Ton)
Telescoping Mirror
••Stainless steel shaft with pocket clip
••Length 19– ⁄ ” extended; 4– ⁄ ” closed
1
2
7
8
••Mirror is 1– ⁄ ” diameter
1
4
Part Number TM100

4 Pc. Xtra Lrg. Wrench Set
••For the big jobs - heavy cast chrome

••Sizes 2– ⁄ ”, 2– ⁄ ”, 2– ⁄ ”, 2– ⁄ ”
1
8
1
4
3
8
1
2
Part Number SJW400
⅜” Micrometer Torque Drive Ratchet/Wrench

••Chrome-plated alloy steel
••No pointer or dial to monitor
••Inch pound range 120 to 960
••Right-hand direction click only
Part Number MATW1
½” Micrometer Torque Drive Ratchet/Wrench

••Chrome-plated alloy steel
••No pointer or dial to monitor
••Foot pound range 30 to 150
••Right-hand direction click only
Part Number MATW3
½” Drive Torque Wrench

•• ⁄ ” drive torque wrench
1
2
with 3⁄8” drive adapter
Part Number TQ150

21 Pc. ¾” Driver Set
••Sixteen sockets: ⁄ ” to 2” 7
8
••Chrome-plated
••Heat-treated polished steel
••Includes: 20” rachet, 20” breaker bar and 3” & 6” extentions
Part Number BSS210
7 Pc. SAE Nut Driver Set

••Color-coded handles
•• ⁄ ”, ⁄ ”, ⁄ ”, ⁄ ”, ⁄ ”, ⁄
3
16
1
4
5
16
11
32
3
8
7
”, 1⁄2”
16
Part Number ND70
7 Pc. Metric Nut Driver Set

••Color-coded handles
••Sizes: 6–12mm
Part Number ND7CM
6 Pc. Nut Driver Set

••Plated-finish
••Heavy-duty, shock-resistant plastic handles
•• ⁄ ”, ⁄ ”, ⁄ ”, ⁄ ”, ⁄ ”, ⁄ ”
3
16
1
4
5
16
3
8
11
32
7
16
Part Number CN60

9 pc. Metric Hex Key Wrench Set
Long Arm
••Chrome molybdenum steel

••Hardened and tempered for strength
••Clamshell
••Sizes: 1.5, 2, 2.5, 3, 4, 5, 6, 8, 10mm
Part Number HK9ML
9 pc. Metric Hex Key Wrench Set

Short Arm
••Chrome molybdenum steel
••Clamshell
••Sizes: 1.5, 2, 2.5, 3, 4, 5, 6, 8, 10mm
Part Number HK9MS
13 pc. SAE Hex Key Wrench Set

Long Arm
••Chrome vanadium steel
••Plated handle
••Black oxide finish
••Clamshell
••Sizes: , ⁄ ”, ⁄ ”, ⁄ ”, ⁄ ”, ⁄ ”, ⁄ ”,
0.050”
1
16
5
64
3
32
1
8
9
64
5
32
3
⁄16”, ⁄ ”, ⁄ ”, ⁄ ”, ⁄ ”
7
32
1
4
5
16
3
8
Part Number HK13L
13 pc. SAE Hex Key Wrench Set

Short Arm
••Plated handle
••Clamshell
••Sizes: , ⁄ ”, ⁄ ”, ⁄ ”, ⁄ ”, ⁄ ”, ⁄ ”, ⁄
0.050”
1
16
5
64
3
32
1
8
9
64
5
32
3
”, 7⁄32”, 1⁄4”, 5⁄16”, 3⁄8”
16
Part Number HK13S

9 Pc. Folding Hex Key Set

••Plated handle
••Sizes: , ⁄ ”, ⁄ ”, ⁄ ”,
0.050”
5
64
7
64
9
64
3
⁄16”, ⁄ ”, ⁄ ”, ⁄ ”, ⁄ ”
1
16
3
32
1
8
5
32
Part Number HEK9C
Telescoping Magnet
••Stainless steel shaft with pocket clip
••Length 18– ⁄ ” extended; 4– ⁄ ” closed
D
1 7
2 8
••Magnet is ⁄ ” diameter
1
4
Part Number TM200
4 Pc. Pick & Hook Set
!
New
Part Number 621
25ft. Economy Tape Measure

••Steel
••S.A.E./metric
••Notched end hook
••Thumb lock
Part Number TP25L

Industrial Mini Flashlight
Krypton® Industrial Mini Flashlight

••Water-resistant, non-corrosive
••Lifetime warranty
••2 AA -100% mercury-free batteries included
Part Number MFL5422
Penlight Flashlight
Stylus 3 Series® Flashlights
••For those hard-to-reach areas!
••Aluminum cases are waterproof
••Available in black, silver or gold
••Batteries included!
Part Description
Number
65012 Stylus 3 Silver/White LED
65018 Stylus 3 Black/White LED
65024 Stylus 3 Gold/White LED
65030 6-Pack AAAA Batteries
Battery Bulb Casing
3 AAAA 100,000 hour lifetime, hi-intensity 6000 series temperated aircraft
alkaline light emitting diode (LED) aluminum with anodized finish.
batteries solid-state bulb Non-slip knurled grip
Bend-A-Light Flashlight
High Intensity Flexible Light
The flexible shaft bends so it will go around corners into small areas where most lights will not fit.
Both models feature a high intensity 3⁄16” diameter lamp.
••2 models to choose from 16” - 5000 candle power & 24” - 10,000 candle power
••Thin flexible shaft
••Amazing brightness from a tiny
3
⁄16” diameter high-intensity bulb
••Goes where ordinary light won’t!
••Great value!
Part Candle Overall Shaft
Description
Number Pwr. Length Length
BAL10150A 5000 Standard Model 16” 10”
BAL12100 Replacement Lamp
BAL15150A 10000 Krypton Long Reach 24” 15”
BAL12110 Replacement Lamp

Air Tool - ¼” Screwdriver
Specifications
Capacity (bolt size).............................. 1⁄4”
Speed (RPM)....................................1,800
Avg. torque (FT/LBS.)..................45–115
Air pressure (PSI)................................. 90
Air consumption (CFM)......................... 4
Air inlet (NPT)..................................... 1⁄4”
Hose size (ID)....................................... 3⁄8”
Weight (LBS)....................................... 2.5
Length..................................................10”
Part Number AD842
Air Tool - 3⁄8” Heavy Duty Drill

2-Gear Type
⁄8” Heavy-Duty Drill (2-Gear Type) with Jacobs Chuck
D
3
Specifications
Chuck size............................................. 3⁄8”
Speed (RPM)....................................2,200
Air pressure (PSI)................................. 90
Air consumption (CFM)......................... 4
Air inlet (NPT)..................................... 1⁄4”
Hose size (ID)....................................... 3⁄8”
Spindle thread................................ 3⁄8”–24
Weight (LBS)....................................... 2.5
Length............................................... 6–1⁄2”
Part Number AD701
Air Tool - Extension Bars

ASB03 1⁄2” Drive 3” Extension Bar
ASB05 1⁄2” Drive 5” Extension Bar
Socket Set
ASE309 3⁄8” Drive 9 pc. Set includes:
5
⁄16”, 3⁄8”, 7⁄16”, 1⁄2”, 9⁄16”, 5⁄8”, 11⁄16” and 3⁄4” with metal tray
ASM309 3⁄8” Drive 9 pc. Metric Set includes:
10, 11, 12, 13, 14, 15, 16, 17 and 19mm with metal tray
Air Tool - Heavy Duty Impact Wrench
½” Heavy Duty Impact Wrench with Pin Clutch
Specifications
Capacity (bolt size)........................................................................... 5⁄8”
Square drive....................................................................................... 1⁄2”
Speed (RPM).................................................................................7,000
Avg. torque (FT/LBS.).....................................................................380
Air pressure (PSI).............................................................................. 90
Air consumption (CFM)................................................................... 4.2
Air inlet (NPT).................................................................................. 1⁄4”
Hose size (ID).................................................................................... 3⁄8”
Weight (LBS).................................................................................... 5.9
Length............................................................................................7–1⁄2”
Part Number AW0717
Kit includes:
Impact wrench Hex key wrench
10 pc. socket set Mini oiler
(9 – 27mm) Oil pot
3” ext. bar Molded case
Kit Part Number AW0717K
Socket Sets
Socket Sets Available
ASE411 1⁄2” Drive 11 pc. Set includes: 7⁄16”, 1⁄2”, 9⁄16”, 5⁄8”, 11⁄16”, 3⁄4”,
13
⁄16”, 7⁄8” and 15⁄16” with metal tray
ASM411 1⁄2” Drive 11 pc. Metric Set includes: 10, 11, 12, 13,
14, 17, 19, 21, 22 and 24mm with metal tray

Industrial Blowguns
Lever Blow Gun Series
BG Series Blowguns combine durability, excellent performance

and safety to meet your specific cleaning or drying applications.
Features:
••Lever activation styles
••10 different nozzle choices
••Blow gun kit provides versatility
••Patented quick-disconnect nozzle adapter
•• ⁄ ” NPT inlet
1
4
••OSHA compliant @ maximum 150 PSI inlet pressure

••Includes: BGL116482 - Gun only
••BGLCPLR - Quick-change nozzle
••BGL25 - High-flow nozzle
Pistol Grip Blow Gun Series
Pistol Grip Blow Guns are ergonomically designed for operator comfort and safety.
Features: D
••Lightweight nylon body insulates from refrigerated air
••Machined brass valve mechanism, nozzle inlet and
hose inlet for strength
••Lever-style trigger with comfortable pistol grip for variable air flow
••Patented quick-disconnect nozzle adapter available
•• ⁄ ” NPT female inlet
1
4
••125 PSIG inlet maximum

••OSHA compliant meets 1910.242 (b) pressure relief and noise level
••@ maximum 150 PSI inlet pressure
••Part Number BGP301804 - Gun only
••Part Number BGP45 - includes BGN5 high-flow nozzle shown above
Accessories
Noise
Part Number Flow Outlet
Description/Nozzle only Level
Nozzle CFM Blocked
dBA
Standard Nozzle for general blowing &
BGN1 17.5 20 89.5
drying applications
BGNB5 Air Screen Nozzle reduces chip flyback 5 18 85
High Flow Safety Nozzle for general
BGN5 20 20 89
dusting & chip removal
BGX3 3” Extension Nozzle for extending reach 15 21 85.5
BGX6 6” Extension Nozzle for extending reach 14.1 22 84
BGX12 12” Extension Nozzle for extending reach 13.3 24 85.5
BGADP Quick-Change Nozzle Adapter – – –

Industrial Blowgun Kit
The BGLKIT contains five of the most popular

nozzles for industrial and automotive uses. BGN6
This kit includes a high-quality, lever-operated
heavy-duty blow gun featuring a patented quick
BGX3
disconnect nozzle adapter which allows users to
switch nozzles quickly and easily. This multi-use
kit contains a high-flow safety nozzle, six-inch BGN5
extension safety nozzle, rubber tip nozzle, needle
tip nozzle, and air-screen safety nozzle. For
BGN7
handy storage, a clear vinyl compartmentalized
snap pouch is included. Ideally suited as a counter
sale product. BGNB5
To order the complete kit,

use Part Number BGLKIT
BGADP
Swivel Fittings & 3-Way Manifolds

Foster Swivel Fittings improve maneuverability and ergonomics when using air tools and spray guns.
Functioning like a universal joint, it allows the hose to remain vertical at all times which reduces operator
fatigue, repetitive motion trauma, and fitting chafe. The Non-Mar Series (plastic encapsulated) is ideal for
applications where chip and scratch reduction is needed.
••Steel body ( ⁄ ” and ⁄ ”), aluminum body ( ⁄ ”)
1
4
3
8
1
2
••High-flow capacity, low-pressure drop

••More sizes for simplified plumbing
••Plastic encapsulation (Non-Mar Series)
Add versatility to your compressed

air systems and simplify multiple tool
operations. Foster’s new 3-Way Hose
Part Manifolds allow three work stations to
Style Dimension use the same air supply. Each manifold
Number
190010A 3
⁄8” FPT × 1⁄4” MPT accepts three quick couplers or outlet
190011A Non-Mar 3
⁄8” FPT × 3⁄8” MPT hoses. Manifold has female NPT
190012 ½” FPT × 1⁄2” MPT inlet and three female NPT outlets.
190040 Non-Mar 3
⁄8” FPT × 1⁄4” MPT Manifolds are available in two inlet
190041 Single 3
⁄8” FPT × 3⁄8” MPT sizes as indicated below.
190042 Swivel ½” FPT × 1⁄2” MPT
Part Manifold Inlet
190026A ¼” FPT × 1⁄4” MPT
Number Dimensions
190029A 3
⁄8” FPT × 1⁄4” MPT
Standard 301187.01 1
⁄4” OD × 1⁄4” ID
190027A 3
⁄8” FPT × 3⁄8” MPT
190028 ½” FPT × 1⁄2” MPT 301805 1
⁄4” OD × 3⁄8” ID

Premium Filter Regulator
A D
B
C
A B C D
FRL 6 9/16 7 7/8 5 9/64 3 7/32
BL 6 9/16 8 1/8 5 9/64 3 7/32
Filter/Regulator Filter/Reg./Lubricator
Part
Number
Port Sizes ••Filter, regulate, lubricate Part
Number
Port Sizes
BL04 1
⁄4” Female ••Filter rating: 40 micron FRL04 ¼” Female
BL06 3
⁄8” Female ••For pressures to 150 PSIG FRL06 3
⁄8” Female
BL08 1
⁄2” Female ••Temp, range 40° to 120°F FRL08 ½” Female
D
The QUBE Lifetime Guarantee by WATTS FluidAir guarantees your QUBE product for life at no extra cost. If your Watts FluidAir
QUBE product ever falls or breaks in proper installations and in proper use, Watts will, at its option, repair or replace the product
at no charge or refund your full purchase price of the item. As a condition of this lifetime warranty, you must complete and return
a warranty registration card to Watts FluidAir. In the event of failure or breakage return the unit to:
Watts FluidAir, Inc. Customer Service Department
Cutts Road Kitlery, Maine 03904-0902
This shall constitute the exclusive remedy for breach of warranty, and the company shalt not be responsible for incidental or consequential
damages, including without limitation damages of other costs resulting from labor charges, delays, vandalism, negligence, fouling caused by
foreign material, damage from adverse air conditions, chemicals, and any other circumstances over which the company has no control.
This warranty shall be invalidated by any abuse, misuse, misapplication or improper installation of this product. The company makes
no other warranty. All other warranties, oral or written, expressed or implied, including warranties of merchantability or fitness for a
specific purpose are hereby excluded and disclaimed. In no event shall the company be liable for incidental or consequential damages.
Piggyback Filter Regulator

Combined filter and regulator for limited space applications. Its panel mounting dimensions
are interchangeable with most competitive models.
1
••
⁄4” NPT in/out
Body Material:
Body is constructed
Adjustment Knob:
The non-rising, self- P
••
olycarbonate bowl, standard;
of 30% glass rein- locking adjustment chemical resistant bowl, optional
forced
thermoplastic and
knob cannot be
vibrated loose. ••
Optional pulse drain dumps excess
zinc-plated steel water automatically
inserts.
Drain: Includes 1⁄8” adapter for drain line.
A tire valve is
Filter Element: employed to drain the Part
Standard 20 micron contaminants from the Description
porous plastic filter bowl while it is
Number
element removes pressurized. 129121-400G Filter Regulator w/Gauge
dirt, grime, pipe
scale and most solid 29668 Mounting Bracket
material. 104094 Nut For Bracket

Ultra Pneumatic Filtration
The UPF Extractor®/Dryer is a two-stage air quality filtration system which removes harmful
moisture, oil and contaminants from compressed air lines. In addition to reducing downtime and
extending service life in pneumatic tools and air-operated equipment, Extractor/Dryers can virtu
ally eliminate “fish-eye”, pinholes, blisters, and water problems in spray painting applications.
NOTE: Extractor/Dryers are for point-of-use end use installation, not for installation at the
compressor.
How It Works:
1. Compressed air containing tiny particles of dirt, dust, oil, rust and
moisture enters the first stage.
2. A coalescing effect occurs as air passes through a cartridge mesh which captures larger particles
and causes moisture to form larger droplets.
3. Air velocity lessens as it enters the extraction chamber allowing particles to collect and moisture
to condense on the honeycomb.
4. Particle-laden water flows along the bottom & out the drain. **Service Kits include:
5. Air passes through the second stage which captures the remaining moisture and dirt down 1 first and 1 second stage filter,
to five micron. Air is filtered & dried. all gaskets and honeycomb insert.
6. Clean, dry air is ready to use.
Add E1 or E2 To Part Number For Filter Only
Part NPTF SCFM Max.
Size Service Kit**
Number Size Rating PSI
H W D Part No.
UPF520B ¼” 15 250 8¼” 3” 15⁄8” 015SK
UPF305 ¼” 50 250 8¼” 4” 1¾” 050SK
UPF306 3
⁄8” 50 250 8½” 4” 1¾” 050SK
UPF307 ½” 50 250 11½” 5” 1¾” 050SK
UPF310 ½” 80 250 11½” 57/8” 3” 080SK
UPF311 ¾” 80 250 14½” 5 /8”
7
3” 080SK
UPF320 1” 150 250 19” 77/8” 41⁄8” 150SK
Contact DME for sizes to 4" & 2000 CFM.
Desiccant
DME Industrial Supplies offers both 13X and 4A Molecular Sieve Desiccants in stock. Due to the
particular designs of the resin dryers used in the industry, it is important that the correct sieve
is used with the dryer that it was designed for. Unfortunately, DME cannot recommend a desic
cant based on either the type of materials you are processing or the type of equipment you have.
You may have two different machines from the same manufacturer that will require different
desiccants. Equipment manufacturers will typically recommend one of two types: 13X or 4A.
Each have advantages when used in the drying process.
Molecular sieve type 13X has a 12% higher water capacity and a larger pore size. This larger pore
allows the water to adsorb faster than the 4A and will adsorb larger molecules as well. Depending
on the quantity and type of molecules present, these could react on the surface of the 13X
during regeneration and not come off, thus reducing the sieve capacity over time. 13X is subject
to contamination which renders it ineffective.
Because of 4A’s smaller pore size, it is less subject to contamination. However, because of its
lower capacity and smaller pore opening, the rate at which it absorbs water will be lower than
with the 13X. Another factor to consider is the bead size. Small beads (8X12 mesh) have a faster rate of water absorption, but they also have a higher
pressure drop than the larger (4x8) beads. If you don’t know which type of sieve your dryer was designed to use, contact the manufacturer
of your equipment for their recommendation. In either case we carry what you need at a fraction the price
charged by the OEM. Our desiccant is only the most fresh and pure to assure optimum performance.
QUANTITY
Water Vapor Adsorption at
Part Number Bead Size Mesh Size
DISCOUNT
25ºC. Equilibrium Data Discount applies to
25
13X542 1
/8” 4×8 current pricing:
Capacity, GM/100GM
20
15
Molecular Sieve Type A
13X544 1
/16” 8 × 12 50–99 less 5%
Silica Gel 100–299 less 9%
10 4A513 1
/8” 4×8 300–599 less 1 9%
Activated Alumina
5
4A514 1
/16” 8 × 12 600–1199 less 21%
0
0 10 20 30 40 50 1200 or more less 24%
Relative Humidity Percent

Impulse Heat Sealers
A fast and easy seal every time!
An instant one-second seal for:

••Polyethylene, Nylon, Polypropylene, Kel-F, Polyflex, Saran and all other heat-sealable materials!
••Simply place film between the seal bars, press and release
••Seals through wrinkles, gussets and multiple film layers with no warm-up needed... provides a ⁄ ” wide 1
16
seal
••Repair Kit includes PTFE tape and a heating element designed for light-industrial use only - approx. 1000
seals per day
Combo Impulse Sealer and Trimmer
••Use with poly tubing to seal and cut at the same time
••Trimmer knife slides forward to cut poly tubing to length desired
Impulse Sealer
Impulse Sealer With Trimmer
Heat Sealers Spare Parts Kits

Part Number Description Kits Include: Part Number Description
HS200 8” Heat Sealer 2 Press Bar Covers, KHS200 8” Kit
HS300 12” Heat Seal 1 Element Cover, KHS300 12” Kit
HS400 16” Heat Sealer 1 Flat Heating Element
KHS400 16” Kit

New Products
Nylon End Cap Flowmeters

Delta-Q Flow Regulators
Duoflow Aluminum Manifolds
Dr. Eddy Flowmeters

Metal Loader Hose
Water Jumpers Stainless Steel Ear Clamps


Section D Shop Supplies PDF

Uploaded by

Copyright:

Available Formats

Section D Shop Supplies PDF

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Section D Shop Supplies PDF

Uploaded by

Copyright:

Available Formats

Setup, Maintenance & Shop Supplies

U.S. 800-626-6653 • Canada 800-387-6600 • Mexico 52-442-7135666 • Worldwide +1-248-398-6000 305

Commercial Air Circulators

••Four mounting options

Pivot Stand & Work Station Fans

18” High Velocity Low Stand

••CFM range 4550 to 3346

Portable Utility Blower with Heater Option

306 U.S. 800-626-6653 • Canada 800-387-6600 • Mexico 52-442-7135666 • Worldwide +1-248-398-6000

Direct Drive 4-in-1® Mancooler®

Belt Drive Portable Mancoolers®

Part Number Description

U.S. 800-626-6653 • Canada 800-387-6600 • Mexico 52-442-7135666 • Worldwide +1-248-398-6000 307

Part Number Description

PS2 9 Cup Scoop

••Completely removable and reusable. Better than tape,

308 U.S. 800-626-6653 • Canada 800-387-6600 • Mexico 52-442-7135666 • Worldwide +1-248-398-6000

Pro Survivor™ Series Stopwatch

Tabletop Digital Timer

Hand Tally Counter Four Digit

Desktop Tally Counter Four Digit

U.S. 800-626-6653 • Canada 800-387-6600 • Mexico 52-442-7135666 • Worldwide +1-248-398-6000 309

Mill Files - Square Edges

Bastard 2nd Cut Smooth

3M ScotchBrite® Scrubbing Sponges

Nylon Hand Pads

NS7446 7446 Green General Purpose - Regular 20 100–499 less 2%

310 U.S. 800-626-6653 • Canada 800-387-6600 • Mexico 52-442-7135666 • Worldwide +1-248-398-6000

ScotchBrite™ Light Duty Cleansing Pad

Abrasive Cloth Rolls from DME Industrial Supplies are aluminum

All Abrasive Cloth Rolls are 50 yards long!

1” WIDE 11⁄2” WIDE 2” WIDE

Abrasive Cloth Sheets

312 U.S. 800-626-6653 • Canada 800-387-6600 • Mexico 52-442-7135666 • Worldwide +1-248-398-6000

U.S. 800-626-6653 • Canada 800-387-6600 • Mexico 52-442-7135666 • Worldwide +1-248-398-6000 313

Barrel Cleaning Brushes

••Overall length: 8” High Carbon

Inch Sizes Metric Sizes

314 U.S. 800-626-6653 • Canada 800-387-6600 • Mexico 52-442-7135666 • Worldwide +1-248-398-6000

Part Brush Overall Wire

Thread Cleaning Brushes

U.S. 800-626-6653 • Canada 800-387-6600 • Mexico 52-442-7135666 • Worldwide +1-248-398-6000 315

Brass Solid End Brushes

Copper Center Brass Brushes

CCB3K 3 Brush Kit - 2”, 3” 4”

316 U.S. 800-626-6653 • Canada 800-387-6600 • Mexico 52-442-7135666 • Worldwide +1-248-398-6000

Highly-efficient brushes for cleaning:

Nylon Tube Brushes

U.S. 800-626-6653 • Canada 800-387-6600 • Mexico 52-442-7135666 • Worldwide +1-248-398-6000 317

Anti-Static Tinsel works great when used in winding,

Part Number: 5020UN

Each box contains 72 ft. of tinsel consisting of two 36 ft. coils

318 U.S. 800-626-6653 • Canada 800-387-6600 • Mexico 52-442-7135666 • Worldwide +1-248-398-6000

Convenient Operation Baffle adjusts air and temperature within range

••Plug-in heating element takes

U.S. 800-626-6653 • Canada 800-387-6600 • Mexico 52-442-7135666 • Worldwide +1-248-398-6000 319

Key Color Temperature Range

320 U.S. 800-626-6653 • Canada 800-387-6600 • Mexico 52-442-7135666 • Worldwide +1-248-398-6000

U.S. 800-626-6653 • Canada 800-387-6600 • Mexico 52-442-7135666 • Worldwide +1-248-398-6000 321

••Completely removable and reusable. Better than tape,

Tough nylon handles are secured to full length