Scribd Logo
Upload

Welcome to Scribd!

  • 75 views

    ACI Corbel

    Uploaded by

    just me
    This document provides design calculations for corbels and brackets supporting an inlet channel at the Luanda Water Treatment Plant. It includes calculations for material properties, section properties, straining actions, reinforcement requirements for flexure, normal force, shear friction, and main reinforcement according to ACI 318 standards. The main reinforcement area is calculated as 24.06 cm^2 using #12 bars. The stirrup reinforcement is found to be unsatisfactory based on the calculated required area of 9.33 cm^2. Anchorage details including cross bar welding, horizontal loop bars, and vertical loop bars are proposed.

    Copyright:

    © All Rights Reserved
    Download as XLS, PDF, TXT or read online from Scribd

    ACI Corbel

    Uploaded by

    just me
    75 views2 pages
    This document provides design calculations for corbels and brackets supporting an inlet channel at the Luanda Water Treatment Plant. It includes calculations for material properties, section properties, straining actions, reinforcement requirements for flexure, normal force, shear friction, and main reinforcement according to ACI 318 standards. The main reinforcement area is calculated as 24.06 cm^2 using #12 bars. The stirrup reinforcement is found to be unsatisfactory based on the calculated required area of 9.33 cm^2. Anchorage details including cross bar welding, horizontal loop bars, and vertical loop bars are proposed.

    Original Title

    ACI-Corbel.xls

    Copyright

    © © All Rights Reserved

    Available Formats

    XLS, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides design calculations for corbels and brackets supporting an inlet channel at the Luanda Water Treatment Plant. It includes calculations for material properties, section properties, straining actions, reinforcement requirements for flexure, normal force, shear friction, and main reinforcement according to ACI 318 standards. The main reinforcement area is calculated as 24.06 cm^2 using #12 bars. The stirrup reinforcement is found to be unsatisfactory based on the calculated required area of 9.33 cm^2. Anchorage details including cross bar welding, horizontal loop bars, and vertical loop bars are proposed.

    Copyright:

    © All Rights Reserved
    Download as XLS, PDF, TXT or read online from Scribd
    Download as xls, pdf, or txt
    75 views2 pages

    ACI Corbel

    Uploaded by

    just me
    This document provides design calculations for corbels and brackets supporting an inlet channel at the Luanda Water Treatment Plant. It includes calculations for material properties, section properties, straining actions, reinforcement requirements for flexure, normal force, shear friction, and main reinforcement according to ACI 318 standards. The main reinforcement area is calculated as 24.06 cm^2 using #12 bars. The stirrup reinforcement is found to be unsatisfactory based on the calculated required area of 9.33 cm^2. Anchorage details including cross bar welding, horizontal loop bars, and vertical loop bars are proposed.

    Copyright:

    © All Rights Reserved
    Download as XLS, PDF, TXT or read online from Scribd
    Download as xls, pdf, or txt
    of 2

    Project No.

    Date

    AN9766 7-Feb-18
    DESIGN CALCULATION SHEET
    Sheet No. Computed by

    of -- A. HASHEM
    Checked by Approved by
    Subject Luanda Water Treatment Plant
    A. Shedid _
    Building Corbel Design
    DESIGN OF MONOLITHIC CORBELS AND BRACKETS ACCORDING TO ACI 318 - 99
    SECTION ID Inlet Channel Support
    bearing plate As
    Material Properties
    (Main Reinf.)
    Concrete Cylinder Strength (f 'C) = 320.00 Kg/Cm2 Vu a
    Steel Yield Stress (fY) = 4000 Kg/Cm2 Nuc

    Section Properties
    h' anchor
    Breadth of Section (b) = 80.00 Cm 2/3 d
    bar
    Total Thickness (h) = 100.00 Cm
    h d
    Depth of Section (d) = 94.00 Cm
    Edge Thickness (h') = 100.00 Cm
    Load distanse from face of support (a) = 20.00 Cm Ah
    Closed Stirrups
    a/d = 0.21 < 1
    Straining Actions
    Ultimate Vertical Force (Vu) = 92.00 t
    Ultimate Normal Force (Nuc) = 0.00 t (Min. = 0.20 Vu = 18.40 t) ACI - 11.9.3.4
    Ultimate Moment (MU) = 19.50 m. t ACI - 11.9.3
    Shear Strength (Vn) = 359.53 t ACI - 11.9.3.2.1

    Reinforcement Calculations
    Reinforcement for Flexure (A f) = 7.73 Cm2 Min. to ACI-10.5
    Reinforcement for Normal force (A n) = 5.41 Cm2 ACI - 11.9.3.4
    Reinforcement for Shear Friction (Avf) = 19.33 Cm 2
    (Concrete Cast Monolithically) ACI - 11.7.4.1, Eqn. (11-25)
    Main Reinforcement (A s) = 24.06 Cm2 ACI - 11.9.3.5 & 11.9.5
    Total Area of Stirrups (A h) = 9.33 Cm 2
    ACI - 11.9.4

    Reinforcement Size
    As = 12 F 16 = 24.13 Cm2

    Ah = 1 Set of closed Stirrups, 1 Row of F 16 Increase Diameter or Number of Sets / Rows


    = ( 2 ) Legs x ( 1 ) Rows x F 16 = 4.02 Cm2 < 9.33 Unsatisfactory

    Anchorage Details
    Apply one of the following anchorage method for (As) reinf.
    Loaded
    area 4 db

    tw = 3/4 db
    tw = db /2 Loaded
    Area
    As
    D= 6 db
    As Straight
    db
    4 db Bent

    a - Cross bar weld b - Horiz. Loop bar c - Vert. Loop bar

    378493379.xls - Rev. 1 Page 1 Of 2 02/07/2018


    b - Horiz. Loop bar c - Vert. Loop bar

    378493379.xls - Rev. 1 Page 2 Of 2 02/07/2018

    You might also like