Scribd
Upload
129 views2 pages

BCE Sheet 2 PDF

1. The document provides a multiple choice quiz about tools and functions in Autodesk Revit for civil and architectural drawings. 2. It includes questions about reference planes, modifying objects, offset and mirror tools, moving objects, rounded corners, text tools, and building information modeling. 3. The final questions ask to calculate the area and volume of a wall based on a provided plan, and to build a BIM model for another architectural plan including 5 stories above a ground floor.

Uploaded by

omar elshahat
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
129 views2 pages

BCE Sheet 2 PDF

1. The document provides a multiple choice quiz about tools and functions in Autodesk Revit for civil and architectural drawings. 2. It includes questions about reference planes, modifying objects, offset and mirror tools, moving objects, rounded corners, text tools, and building information modeling. 3. The final questions ask to calculate the area and volume of a wall based on a provided plan, and to build a BIM model for another architectural plan including 5 stories above a ground floor.

Uploaded by

omar elshahat
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Mansoura University                                                                         Building & Construction Engineering (BCE)    

Faculty of Engineering                                                                   Civil & Archit. Drawings using the Computer 
     
Exercise # 2 
1. Reference Planes are useful drawing aids. (T/F) 
2. When you want to make a previously drawn rectangle wider, you would use the ………. Tool. 
3.  Use the offset option to quickly create parallel line(s). (T/F) 
4. Use the …………..command to create a reverse image. 
5. Occasionally, you need to draw an object and then move it into place to accurately locate it. (T/F) 
6. The ………………..(which is an option within the Model Line tool) allows you to create a rounded 
corner where two lines intersect. 
7. When using the Mirror tool, you occasionally need to draw a temporary line that represents the 
Axis of Reflection. (T/F) 
8. Revit is only accurate to three decimal places. (T/F) 
9. The triangular shaped Snap symbol; represents the Midpoint snap. (T/F) 
10. You can move or rotate text via it’s modify symbols when text is selected. (T/F) 
11. Use the …………………………tool to duplicate objects. 
12. When selecting objects, use the …………………………….to select all the objects in the selection 
window and all objects that extend through it. 
13. You can change the height of the text from the Type Selector. (T/F) 
14. The Snap Off option must not be checked in the Snaps dialog box to automatically and accurately 
select snap points while drawing. (T/F) 
15. For the shown plan, it is 
required to build a BIM 
model using Revit. 
Notes: 
 The building is only a 
ground floor. 
 The story height is 3 m 
Wall (1) 
 You should add a floor and a 
roof 
 Any missing data can be 
assumed. 
 According to your 
assumptions, what is the 
Area and Volume of wall (1). 
16. Build the BIM model for the 
following architecture Plan.  
Notice: 
  The building is consists of a ground floor in addition to 5 repeated stories. 
  The story height is 3.0 m 
  The level of the ground floor is +0.9 
  The ground level is 0.00 
(Any required data can be reasonably assumed) 

Autodesk Revit                                                                                                                        Dr. Mahmoud Dawood 

You might also like