Section 1

Threaded Fasteners
HEAVY HEXAGON STRUCTURAL BOLTS # 6914 10
Ref: DIN 6914 1989/ISO 7412 - High Strength - Property Class 10.9 - Coarse Thread Pitch - Partly Threaded
Heat Treated Steel - Hot Dip Galvanized
For structural bolting with oversized across-flat pattern
Bolts manufactured according to DIN 6914-10 standard, when matched with the oversized nut # 6915-10 and flat washer # 6916-(C45) provide an
assembly with a level of assurance against failure by thread stripping if overtightened.
Tensile Strength: Rm/ N/mm² 1040 minimum, Mpa 1040 minimum (150,800 psi)

NOMINAL NOMINAL THREAD DIAMETER in mm

LENGTH mm M 12 M 16 M 20 (M 22) M 24 (M 27) M 30
30 x - - - - - -
35 x - - - - - -
40 x x - - - - -
45 x x - - - - -
50 x x x - - - -
55 x x x - - - -
60 x x x x x - -
65 x x x x x - -
70 x x x x x x -
75 - x x x x x x
80 x x x x x x x
90 x x x x x x x
100 x x x x x x x
110 - x x x x x x
120 - x x x x x x
130 - x x x x x x
140 - x x - x x x
150 - x x - x x x
160 - x x - x x x
180 - - - - x - x
200 - - - - x - x
“x” denotes stock availability

Dimensions in mm Ref: ISO 7412, DIN 6914-1989

THREAD DIA. d M 12 M 16 M 20 (M 22) M 24 (M 27) M 30 M 36
PITCH 1.75 2 2.5 2.5 3 3 3.5 4
THREAD up to 100 mm 21 26 31 32 37 37 40 48
LENGTH b 100 - 200 mm 23 28 33 34 39 39 42 50
c max. 0.6 0.6 0.8 0.8 0.8 0.8 0.8 0.8
max. 12.70 16.70 20.84 22.84 27.84 27.84 30.84 37.00
ds
min. 11.30 15.30 19.16 21.16 26.16 26.16 29.18 35.00
e min. 22.78 23.91 35.03 39.55 45.20 50.85 55.37 66.44
k nom. 7.5/8 10 12.5/13 14 15 17 18.7/19 22.5/23
s max. 21/22 27 32/34 36 41 48 50 60
PROOF LOAD (N) 90,000 130,000 200,000 250,000 292,000 380,000 465,000 550,000
When two dimensions are shown in a block, the second corresponds to DIN 6914-1979

REFERENCE KEY:
d = Nominal Diameter e = Across Corners of Head
c = Washer Face Thickness k = Head Height (including washer face)
ds = Unthreaded Shoulder Diameter s = Across Flats

s How to Order
Item #: 6914 10
e ds
Size: 16 x 60
Quantity: 100
Tel: 1-888-966-MMCC

Diameters shown in () should be avoided for new design.

Also available in longer lengths and larger diameter -Please inquire.
Hexagon Bolt # 6914-10 must be used with the High Strength Oversized Nut # 6915-10 (page 1-136) and
Hardened Washer # 6916 (page 2-235) to guarantee proper clamp load.

1-26 © Copyright Metric & Multistandard Components Corp. 2000