Engineered Class Pulley Brochure

Download as pdf or txt
Download as pdf or txt
You are on page 1of 8

ENGINEERED EMD Engineered Mine Duty

TD Turbo Disc
TB T-Bottom
CLASS PULLEYS DSP Dead Shaft Pulley
Engineered Pulley Design

Engineered Fillet Weld


Full Penetration Weld

Pulleys are Designed Disc Machined to


to Provide Long Life Weld-on Hubs
TURBO-DISC Profile

and Reliability Keyless


Bushing

The Engineered Class


Pulley (ECP) line is not limited
to just high tonnage and
extreme applications. This
class of pulley can be used
effectively in every industry to
ensure optimum performance Traditional Drum Pulley has fillet Engineered Drum Pulley with full
and pulley longevity. The weld at the connection of end- penetration weld that provides
Conveyor Equipment disc to shell and end-disc to hub. added strength at high stress
Manufacturers Association points. Additionally, the keyless
(CEMA) defines Engineered locking device reduces stress at
Class Pulleys as “One which the pulley-to-shaft connection,
has been specifically designed eliminating weld failure.
to meet load conditions of a
particular conveyor pulley”. End-Disc Design
Martin Engineered Class Pulleys
are manufactured with the
following processes:
Stress Balanced Design

• Full penetration weld using LOAD


DRUM
a high-strength submerged
END-DISC
arc process
SHAFT
PILLOW
• Keyless locking device BLOCK
reduces stress at the
KEYLESS
pulley-to-shaft assembly, BUSHING

eliminating a keyway failure  Bending Moment


Transmitted by the

• CNC Machining of end-
Pulley End-Disc

discs and shafts   M T

M b
• Ultrasonic Tested Weldment Bending Momentum
is available Transmitted by the Shaft

Illustrative purposes only. Not reflective of actual loads.


• Magnetic Particle Testing
Weldment is available Engineering
The diagram below represents the flexible design featured in our
• Thermal Stress Relieving
ensures each component Engineering Class Pulleys. As the load is applied, the rim, end-discs,
in the pulley operates as keyless lockers, and the shaft, all operate in unison, so as to not introduce
a pulley system  stress risers.

• Static Balancing is Engineering Data Required:


standard and Dynamic
Balancing is available • Belt Tensions (T1 + T2) • Conveyor Incline
• Belt Conveyor Configuration • Motor HP
• Integral hub, profiled, • Belt Wrap on Pulley • Counter Weight
turbine and T-Section end
• Conveyor Length • Bearing Centers
disc designs
• Belt Speed

2 Engineered Class Pulley


Engineered Pulley Design

Specifications

’s Engineered Class Pulleys are available as:


• EMD (Engineered Mine Duty)
• TD (Turbo Disc)
• TB (T-Bottom)
• DSP (Dead Shaft Pulley)

ECP’s feature:
• Keyless locking devices (single engagement
in EMD and TD, double engagement in TB’s)
-- Higher contact pressures for
greater torque transmission
-- No backlash due to fit tolerances
-- Ability to adjust axial position
and angular timing
• Full penetration weld in rims and end-disc to rim
• Weldless hub design, allowing for pre-
stress elimination at lockers
• Profiled end-disc (in Turbo Disc & T-Bottom)
• No center discs
• Statically balanced

Nomenclature

EMD (Engineered Mine Duty), TB (T-Bottom) & TD (Turbo Disc)


Face
C Crown F EM 18 051 6 407 06 Rim Thickness In 16th, 2 digits
06 3/8" (06/16)
F Flat
Bore (Metric or Standard) 3 digits
Pulley Style
220 220 mm
EM Engineered Mine Duty 407 4 7/16"
TD Turbo Disc
TB T-Bottom Last Digit of Keyless Locker
6 B106
Diameter 2 digits
18 18"
Face Width 3 digits
051 51"

DSP — Dead Shaft Pulleys


Face
C Crown C DS D 20 042 B 515 Bearing Bore Size In 16th, 3 digits
515 5 15/16"
F Flat
Bearing or Piloted Flange
Pulley Style B Bearing
DS Dead Shaft P Piloted Flange
Pulley Type Face Width 3 digits
D Drum 042 42"
W Wing

Diameter 2 digits
20 20"

Engineered Class Pulley 3


Pulley Types

EMD Engineered
Mine Duty TD Engineered
Turbo-Disc

• Solid Plate End-Discs with backing rings to • One Piece Machined and Profiled End-Disc
support reaction forces of keyless locking elements with a custom engineered radius at the transition
between the locking element and the rim
• Full Penetration Weld between end-discs and rim.
Pre-qualified weld joint to proper AWS specification, • Full Penetration Weld between end-discs and rim.
applied by certified welders with semi-automatic, Pre-qualified weld joint to proper AWS specification,
submerged arc welding equipment applied by certified welders with semi-automatic,
submerged arc welding equipment
• Full Penetration Longitudinal Weld in rim
• Full Penetration Longitudinal Weld in rim
• End-Discs are Welded Internally
and Externally to the rim • End-Discs are Welded Internally
and Externally to the rim
• Single Engagement Keyless Locking
Device for improved torque and bending • Single Engagement Keyless Locking
moment transmission without reducing Device for improved torque and bending
shaft strength by adding keyways moment transmission without reducing
shaft strength by adding keyways
• Statically Balanced
• Statically Balanced
• Machined Face is Available
• Machined Face is Available
• Two Year Warranty
• Two Year Warranty

4 Engineered Class Pulley


Pulley Types

TB Engineered
T-Bottom DSP Dead
Shaft

• Integral Rim and Double Profiled End-Disc • Problem Solving Design for heavy contamination,
with submerged arc weldment fusing T-Bottom space restrictions, reduced moment arm at
end-discs with rim bearings

• Full Penetration Weld between end-discs and rim. • Spherical Roller Bearings feature double
Pre-qualified weld joint to proper AWS specification, lip seals for contamination protection
applied by certified welders with semi-automatic,
• Lubrication Through Shaft while pulley is rotating.
submerged arc welding equipment
Sealed for life designs are available for heavy-duty
• Full Penetration Longitudinal Weld in rim applications

• Double Engagement Keyless Locking • Inner Grease Tube in place of backside bearing
Device for maximized torque and bending seals to prevent grease from entering pulley shell
moment transmission without reducing instead of lubricating the bearing
shaft strength by adding keyways
• Support Pedestals are sized to replace standard
• Statically Balanced or existing pillow blocks. Same bolt pattern and
shaft height. Shaft held in pedestals with keyless
• Machined Face locking device
• Two Year Warranty • Drum Pulley Available

• Two Year Warranty

Engineered Class Pulley 5


Custom Capabilities
and Other Conveyor Components

Idlerseered Pulleys are Complete Custom Solutions

Available options include:


• Lagging • Mounted Bearings
-- 45/60/90 Durometer SBR • Machined Shafting
-- MSHA (Mine Safety & Hazard Administration) Approved -- Available in these Common
Lagging for Underground Applications Grades: 1045 CF, 1045 HR,
4140, Stainless Steel
-- Ceramic Lagging (Hot Vulcanized)
• Shaft Couplings
-- AR – Abrasive Resistant Lagging
• External Backstops
-- SOF (Static Conductive/Oil Resistant/ Flame Resistant) Lagging
• Fully Assembled Drive Packages
-- EPDM
-- Molded Urethane Lagging

Idler types:
Idlers
• Flat Return Rolls
Idlers are manufactured to meet • Impact Idlers
or exceed CEMA standards. uses • Live Shaft Idlers
sealed-for-life ball bearings that allows
for trouble-free life even in the harshest • Offset Idlers
applications. 9 gauge tubing is used for • Rubber Disc Idlers
CEMA C & D Idlers and 7 gauge tubing • Self-Aligning Idlers
is used for CEMA E Idlers.
• Troughing Idlers
Specifications & Features: • Underground Idlers
• Idlers are maintenance-free. • V-Returns
Idlers use sealed-for-life ball bearings
that allows for trouble-free life in the •
harshest applications Specials Offered:
• Low rolling resistance that allows for • Garland / Catenary
the lowest total operating cost • Belt Saver Brackets
• Manufactured for low roll runout • Scale Quality Rolls
(TIR), rotational torque and axial
bearing TIR • Polyurethane Rolls
Idlers are stocked in a
• Guide Rollers
• Offered in a wide range of belt wide range of belt widths to
widths from 18" to 96" meet customers' needs. • Return Roll Guarding
• 9 gauge tubing for CEMA C & D • Impact Beds
offers
• 7 gauge tubing for CEMA E Drop-In Rolls for most major
competitors. Scan for
• Other steel gauges available
Request a Quote Online more
information
Scan for more information

6 Engineered Class Pulley


Shafting
has the inventory and machining capabilities
for quick turnarounds on Heavy-Duty Conveyor Pulley
Shafts and custom Shaft detailing for a wide variety
of applications. Stock Shafting is available for most
applications on-the-shelf and ready to ship. For
custom detailing, Martin offers on-site machining for
customization, turn downs, customized keyways and
more.
• Shafts up to 24" diameter
• Shafts up to 22' long
• Raw bar weights up to 22,000 lbs.
• Stock shafting material available in several
grades 1144 —1045 — 4140 and Stainless Steel

offers a full line of roller bearings and


stocks most common sizes. We can supply SAF, Type
E, and Ball Bearing units in Pillow Block, Flange Block &
Take-Up Housing styles.

• Type E Pillow Block Bearings


Take-Up Frames –– Bore Range from 1-7/16” to 4-15/16” Diameter

• Split Housed Spherical Pillow Block Bearings


's Take-Up frames are
fabricated from steel, offering –– Stocked from 1-7/16” to 8” Diameter
superior strength and durability in
the most rugged conditions. Bearings
• Available in these styles:
–– Light Duty
–– Top Angle 's MXT® & MXT-STL® bushings are available from
–– Heavy Duty stock to fit all popular pulley sizes. Both styles are also
–– Center Pull available as Weld-On Hubs.
–– Wide Slot
–– Tube Take-Up Both MXT® & MXT-STL® Bushings offer a 2" per foot
• Accommodate bearing shafts taper, which reduces end disc pre-stressing, as well as
sizes from 1" to 5.9375" increasing clamping force.
• Available in standard travel
lengths from 9" to 60"
• Stainless Steel, ACME thread &
Bushing Style
MXT Martin XT
MXT H - STL 45* Bore Max Size
Example:
MTO lengths available M-HE Martin HE 45 4.5"
• Suitable for most Weld-On Hub MXT® Steel Option
manufacturers' housing styles
Add H if its a Weld-On Hub Add -STL for Steel option,
including center pull wide slot, only for MXT (not for hub)
pillow block and top angle
protected screw * NOTE: This part number does NOT reflect an actual part number,
it includes all bushing/hub options only for instructional purpose.

Bushings & Weld-On Hubs


Engineered Class Pulley 7
Lagging Locations
Corporate Offices

USA
Sales & Manufacturing
Arlington, TX
817-258-3000 (FAX 817-258-3333)
’s lagging is designed
Regional
to meet the demands of your Manufacturing Plants
application. We offer Ceramic Albemarle, NC
Lagging custom fit to your 704-982-9555 (FAX 704-982-9599)
Atlanta, GA
application, Vulcanized Rubber, 404-292-8744 (FAX 404-292-7771)

AR SOF
Cold Bond Lagging and Strip Static Conductive/
Abrasive Oil Resistant/Flame
Burleson, TX
817-295-7151 (FAX 817-447-3840)
Lagging. Resistant Lagging Resistant
Danielsville, PA
610-837-1841 (FAX 610-837-7337)
• Popular for rugged • SOF lagging reduces the risk of
Available Lagging Options: Ft. Worth, TX
applications or conveying explosion, and fire or oil related 817-258-3000 (FAX 817-258-3173)
• AR abrasive materials lagging failures Montpelier, OH
419-485-5515 (FAX 419-485-3565)
• SOF • This lagging mimics the tires • The self-extinguishing
Sacramento, CA
of giant "quarry loaders" characteristics of SOF make it 916-441-7172 (FAX 916-441-4600)
• Ceramic (Hot Vulcanized) that withstand the harshest ideal for use in grain and fertilizer
environments applications. Branch Manufacturing Plants
• MSHA
Boston, MA
508-634-3990 (FAX 508-634-3998)
• Molded Urethane
Charlotte, NC
• Cold Bond 704-394-9111 (FAX 704-394-9122)
Chicago, IL 
• Weld-On Strip 847-298-8844 (FAX 847-298-2967)
Denver, CO
303-371-8466 (FAX 303-371-7116)
Houston, TX 
713-849-4330 (FAX 713-849-4807)
Kansas City, MO

Cost Cold Bond Weld-On Strip


816-231-5575 (FAX 816-231-1959)
Los Angeles, CA

Saving
323-728-8117 (FAX 323-722-7526)
Minneapolis, MN
• We stock full rolls of pre-cured • Weld-On Strip Lagging is 952-829-0623 (FAX 952-944-9385)

Tips rubber suitable for installation


directly to the face of the Pulley.
available from stock and is easily
installed on Drum Pulleys either
Nashville, TN
615-871-4730 (FAX 615-871-4125)
Pittsburgh, PA
Can be applied when Pulleys in our facilities or in the field
Save up to 50 - 60% are relagged while in operation
724-452-4555 (FAX 724-452-5794)
on Pulley replacement costs • Stocked in 72” strips with Portland, OR
to reduce downtime 503-223-7261 (FAX 503-221-0203)
for Conveyor Pulleys with retainers in diameters from 10”
Tampa, FL
• Available in plain or diamond to 48”
lagging. 813-623-1705 (FAX 813-626-8953)
groove pattern
• Available in 60 durometer SBR, 40 Manufacturing Only
Scan for more information • Available in a "Cold Bond Kit" durometer rubber, EPDM & SOF Abilene, TX • Clarksville, TX
Dallas, TX • Mansfield, TX
Paragould, AR

Cambridge, Ontario
CANADA

519-621-0546 (FAX 519-621-4413)


Edmonton, Alberta
780-450-0888 (FAX 780-465-0079)
Mississauga, Ontario
905-670-1991 (FAX 905-670-2110)

Guadalajara, JAL
MEXICO

+52 33-3283-1188

MSHA
Mine and Safety (FAX +52 33-3271-8450)
Hazard Approved
Lagging
Molded Urethane Ceramic Hot Vulcanized Monterrey, N.L.
+52 811 156 6830
• Vulcanized Ceramic Lagging (FAX +52 81-1156-6833)
• Should be used in all underground • Molded Urethane is poured on
coal mining applications and any a Pulley a liquid state, cured, by has proven to be the best in Toluca, MEX
+52 722 276 0800
application where fire safety is hardened and then machined the industry (FAX +52 722-276-0801)
imperative • Available in smooth,
• Urethane lagging can be São Paulo, SP
BRAZIL

• Can be shipped as plain, herringbone altered to a herringbone or herringbone or diamond +55 19 3877 9400
(FAX +55 19-3877-9429)
or diamond groove patterns diamond groove pattern groove patterns

Sales and Engineering will work with you to completely solve martinsprocket.com
your belt conveying needs. Since there are infinite amounts of
& Troubles

A
Maintena

Angular Misalignmen
t
Fleeting Angle

Parallel Misalignmen

Free Download
t
nce

conveying possibilities and configurations our sales and


hooting

M A IN T E
NANCE
Guide

TROUGH

& TROU
ING IDLER

engineering staff are prepared to assist you with a custom solution. Maintenance &
BL
IMPACT IDLER

ESHOOT
1 PULLEY
HEAD/DR
IVE
Rim Face

IMPACT BED ASSEMBLY ING GUIDE End Disk

2 PULLEY
SNUB PRIMARY
BELT CLEANER
5 PULLEY
TAIL
6 IDLER
RETURN
SECOND
ARY
BELT CLEANER
TAKE-UPCHAIN DRIVE
3 BEND
3 BEND TAKE-UP
S PULLEY

Troubleshooting
Hub &
PULLEY
GEAR DRIVE
Bushing
DRUM PULL
4 PULLEY
TAKE-UP
S EY
Contact Bar
COUPLINGS

Call , we will be happy to assist you!


Wing Gusset

Abrasive Wear SYNCHRON


OUS DRIVE
Burning
Corrosive
S

Guide
Wear
V-BELT DRIVE Cracking
S Destructive
Pitting Hub
SCREW CONV
Fatigue Breakage EYORS
Grinding Checks

DRAG CONV Initial


Pitting WING PULL
EYORS Interference EY
Normal Wear

BUCKET ELEVA
TORS

Scan to download
HEAVY-DUT
Overload Breakage
Y CONVEYOR
Overload Wear
PULLE

COPYRIGHT 2017 • MARTIN SPROCKET & GEAR, INC.


CracksYS
Quenching
/ BELTRidging
CONV EYORS Rippling

Rolling and

ALL RIGHTS RESERVED • PTB-ECP • 06/26/2017


Peening
Scratching
Severe Scoring

W W W. M Slight Scoring
ARTINS
PROCK Spalling
E T. C O M

You might also like