S&G 6860, 6880, 6890 ®

Key Operated
Safe Locks

The dependable,
secure, and
convenient lock
option for your safe

The Convenience of a Key

• Lock bolt retraction and extension is controlled directly by • Key retaining design ensures the safe is securely locked
turning the key. No combinations or complicated dialing whenever the key is removed from the lock.
directions to remember. • Same size and mounting footprint as other standard
• Key operated safe locks can be opened faster than S&G locks, allowing for easy retrofit without the need for
combination operated locks. boltwork or mounting screw location changes.
• Keys are available in various lengths to accommodate Options:
different safe door thicknesses. • Extruded aluminum guide tube makes it easy to insert the
• Disabling old keys and setting the lock to new keys is key through thick safe doors, and it helps keep dust and
accomplished without disassembling the lock, and takes dirt out of the lock. It requires a 5/8 inch (0.625” or 15,9
less than 30 seconds without special tools or knowledge. mm) hole through the safe door and an escutcheon.
Special Features: • Two different styles of key hole escutcheons to help
• Eight or nine opposing brass lever design (depending align the key properly when inserting it into the lock.
on the particular model) for extra security and increased The escutcheons also make the front of the safe more
resistance to picking. attractive.
• A normally open/normally closed switch equipped model
is available to report when the lock is opened or closed, or
it can be used as a safe alarm circuit shunt.
CEN A, B, C and VdS 1, 2, 3 approved models

OM
NT
C

PLIA

Uncontrolled Document Rev 1/22/2009

© 2009 Sargent & Greenleaf, Inc.
Part numbers
LOCK WITH 4 MM LOCK WITHOUT 4 MM
BOLT END HOLES BOLT END HOLES

LOCK CEN RATING VdS RATING DESCRIPTION

MODEL
6860-069 A 1 8-LEVER LOCK WITH STANDARD BOLT (NO KEYS)
6860-166 A 1 8-LEVER LOCK WITH (2) 4 MM DRILLED AND TAPPED BOLT END HOLES (NO KEYS)
6880-069 B 2 9-LEVER LOCK WITH STANDARD BOLT (NO KEYS)
6880-166 B 2 9-LEVER LOCK WITH (2) 4 MM DRILLED AND TAPPED BOLT END HOLES (NO KEYS)
6880-167 B 2 9-LEVER LOCK WITH (2) 4 MM DRILLED AND TAPPED BOLT END HOLES AND (1) SWITCH (NO KEYS)
6890-069 C 3 9-LEVER LOCK WITH STANDARD BOLT (NO KEYS)
6890-166 C 3 9-LEVER LOCK WITH (2) 4 MM DRILLED AND TAPPED BOLT END HOLES (NO KEYS)
6890-167 C 3 9-LEVER LOCK WITH (2) 4 MM DRILLED AND TAPPED BOLT END HOLES AND (1) SWITCH (NO KEYS)

KEY STEM LENGTH

TOTAL KEY LENGTH

KEY TOTAL KEY LENGTH KEY STEM LENGTH DESCRIPTION

PART NO.
6880-452 96,5 MM (3.80 INCH) 45 MM (1.77 INCH) SET OF (2) IDENTICAL PRE-CUT NICKEL PLATED BRASS KEYS
6880-652 116,5 MM (4.59 INCH) 65 MM (2.56 INCH) SET OF (2) IDENTICAL PRE-CUT NICKEL PLATED BRASS KEYS
6880-902 141,5 MM (5.57 INCH) 90 MM (3.54 INCH) SET OF (2) IDENTICAL PRE-CUT NICKEL PLATED BRASS KEYS
6880-152 166,5 MM (6.56 INCH) 115 MM (4.53 INCH) SET OF (2) IDENTICAL PRE-CUT NICKEL PLATED BRASS KEYS
6880-903 141,5 MM (5.57 INCH) 90 MM (3.54 INCH) SET OF (3) IDENTICAL PRE-CUT NICKEL PLATED BRASS KEYS
6880-153 166,5 MM (6.56 INCH) 115 MM (4.53 INCH) SET OF (3) IDENTICAL PRE-CUT NICKEL PLATED BRASS KEYS

STEM OR BIT LENGTH LENGTH WITH BIT DESCRIPTION

PART NO. ATTACHED
6880-302 38,1 MM (1.50 INCH) SET OF (2) IDENTICAL PRE-CUT DETACHABLE KEY BITS
6880-313 85 MM (3.35 INCH) 149 MM (5.87 INCH) KEY STEM FOR DETACHABLE BIT (STEM ONLY)
6880-316 118 MM (4.65 INCH) 182 MM (7.17 INCH) KEY STEM FOR DETACHABLE BIT (STEM ONLY)
6880-322 210 MM (8.27 INCH) 274 MM (10.79 INCH) KEY STEM FOR DETACHABLE BIT (STEM ONLY)

PART NO. DESCRIPTION

6880-500 KEYHOLE ESCUTCHEON WITHOUT SWING COVER ESCUTCHEON
WITHOUT COVER
6880-501 KEYHOLE ESCUTCHEON WITH SWING COVER
ESCUTCHEON WITH
6880-510 ALUMINUM KEY GUIDE TUBE 1 METER (39.4 INCHES) LONG
COVER
6880-901 METAL SETUP KEY 90 MM (3.54 INCHES) LONG OVERALL
GUIDE TUBE
6880-151 METAL SETUP KEY 115 MM (4.53 INCHES) LONG OVERALL
6880-159 ACETAL RESIN SETUP KEY 115 MM (4.53 INCHES) LONG OVERALL
www.sargentandgreenleaf.com
Corporate Headquarters: One Security Drive • Nicholasville, Kentucky 40356 • USA • Tel. 859-885-9411, Fax 859-887-2057
European Headquarters: 9, chemin du Croset • 1024 Ecublens• Switzerland • Tel. 41 21 694 34 00, Fax 41 21 694 34 09