6 3/4” 4:5 Lobe 7.0 Stage HS88 Group 0 PV675470-HS-0 PRELIMINARY ENGINEERING SPEC Rotor Details FOR INFORMATION ONLY Recommended Operating Range Specification Sheet for: Overall Length (in) 202.5 Flow Rate 300 gpm-600 gpm Head Length (in) 6 3/4" 4:5 Lobe 7.0 Stage HS88 Group 0 6.00 No Load RPM 150-300 Head Diameter (in) 4.00 Displacement 0.5 revs/gal Contour OD (in) Rotor Details 4.220 Max WorkingRecommended Operating Range Pressure 1260 psi Ecc (in) Overall Length (in) 202.5 0.354 Max Off-BTMFlow Rate Pressure 300 gpm-600 gpm 101 psi C to V (in) Head Length (in) 6.00 3.512 No Load RPM Max Operating Torque 150-300 5571 ft-lbs Head Diameter (in) 4.00 Displacement 0.5 revs/gal Weight (lbs) Contour OD (in) 520.0 4.220 Torque Slope Max Working Pressure 4.643 1260 psift-lbs/psi Std Connection Ecc (in) 2 0.354 7/8" Reg Max Operating pressure = Max Working psi - Max Off-BTM psi Max Off-BTM pressure 101 psi C to V (in) 3.512 For maximum life do not exceed 1159 Max Operating Torque psi differential. 5571 ft-lbs Weight (lbs) 520.0 Torque Slope 4.643 ft-lbs/psi Std Connection 2 7/8" Reg Max Operating pressure = Max Working psi - Max Off-BTM psi Stator Details Sizing and Fit Information For maximum life do not exceed 1159 psi differential. Overall Length (in) Stator Details 214.6 Vector Minor (in) 3.507 Tube OD (in)Overall Length (in) 6.75 214.6 Shop Fit @ 70°F Sizing & Fit Information 0.005 Compression Tube ID (in) Tube OD (in) 6.75 5.50 TempVector Minor (in) Correction Factor* 3.5073.5 Tube ID (in) 5.50 Shop Fit @ 70°F 0.005 Compression Alternate OD (in) 7.00 Alternate OD (in) 7.00 Temp Correction Factor* * Temp correction factor is the degrees (F) required3.5 to change the stator size Std CutbacksStd Cutbacks (in) (in) 8.00 8.00 by .001” on diameter. * Temp correction factor is the degrees (F) required to change the stator size Weight (lbs) Weight (lbs) 815 815 by .001" on diameter.
Theoretical performance with water at Operating Temperature
Theoretical peformance with water at Operating Temperature
