Scribd
Upload
147 views2 pages

PDMS DRAFT Check List

The document provides a checklist for checking a drawing in PDMS Draft, including verifying references, dimensions, labels, deleting unreferenced elements, removing unnecessary dimension points, and using intelligent texts where possible. It notes that some checks should be done ongoing and others when a drawing is finished. Users are directed to other documentation for explanations of terms, query commands, and instructions for using lists and reports.

Uploaded by

Rahul Phadake
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
147 views2 pages

PDMS DRAFT Check List

The document provides a checklist for checking a drawing in PDMS Draft, including verifying references, dimensions, labels, deleting unreferenced elements, removing unnecessary dimension points, and using intelligent texts where possible. It notes that some checks should be done ongoing and others when a drawing is finished. Users are directed to other documentation for explanations of terms, query commands, and instructions for using lists and reports.

Uploaded by

Rahul Phadake
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 2

PDMS DRAFT Check List

The purpose of this checklist is to provide general guidelines to check a drawing in Draft. Some of the
checks are on-going, some of should be performed once a week or when drawing is finished and is ready to
be issued.

1. Check references of drawing, sheet and view levels

- Use “Utilities > Reports”- function to list element’s IDLNAME and IDLX

2. Check dimensions are referenced to the correct elements

- Use “Utilities > Reports”- function to list element’s DDNAME

3. Check labels are referenced to the correct elements

- Use “Utilities > Reports”- function to list element’s DDNAME

4. Delete elements without reference

- Use “Utilities > Lists”- function to select element’s DPPT/SLAB/GLAB

(DDNAME EQ NULREF)

5. Delete unneeded dimension points

- Visual check

6. Check intelligent texts are used where possible

- Use “Utilities > Reports”- function to list element’s BTEXT


NOTES:

- For term explanations, see “PDMS Terms”

- For query commands, see “PDMS Query Commands”

- For detailed instructions how to use lists, see “PDMS Lists”

- For detailed instructions how to use reports, see “PDMS Reports”

You might also like