Scribd
Upload
150 views2 pages

Assignment 1

This tutorial document provides instructions and 4 problems for solving kinematics and dynamics of machinery using vector methods. The problems involve determining: 1) the displacement of a point on a rolling wheel's periphery, 2) the absolute displacement of a point moving between two positions on a rotating link, 3) the velocities of points and angular velocities of links on a push-link mechanism with a driven crank, and 4) the velocity of a point and angular velocity of a link on another mechanism with a driven crank rotating counterclockwise. Figures correspond to each problem and are to be used in solving the vector method problems.

Uploaded by

Subrat Senapati
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
150 views2 pages

Assignment 1

This tutorial document provides instructions and 4 problems for solving kinematics and dynamics of machinery using vector methods. The problems involve determining: 1) the displacement of a point on a rolling wheel's periphery, 2) the absolute displacement of a point moving between two positions on a rotating link, 3) the velocities of points and angular velocities of links on a push-link mechanism with a driven crank, and 4) the velocity of a point and angular velocity of a link on another mechanism with a driven crank rotating counterclockwise. Figures correspond to each problem and are to be used in solving the vector method problems.

Uploaded by

Subrat Senapati
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Tutorial 1: Kinematics and Dynamics of Machinery

Instructions:
i) Figure numbers correspond to the respective problem numbers
ii) Solve the problems using vector method

1. A wheel with center at O rolls without slipping so that its center is displaced 250 mm to
the right. What is the displacement of point P on the periphery during this interval?

Fig. 1

2. A point Q moves from A to B along link 3 while link 2 rotates from θ2  300 to θ 2/  1200
. Find the absolute displacement of Q.

Fig. 2

3. Crank 2 of the push-link mechanism shown in the figure is driven at ω2  60 rad/s cw .


Find the velocities of points B and C and the angular velocities of links 3 and 4.
Tutorial 1: Kinematics and Dynamics of Machinery

Fig. 3

4. Find the velocity of point C on link 4 of the mechanism shown in the figure if crank 2 is
driven at ω2  48 rad/s ccw . What is the angular velocity of link 3?

Fig. 4

You might also like