Scribd
Upload
32 views

D3479/D3479M 96 (Reapproved 2007) Date of Testing: Revision Level or Date of Issue of This Test Method

This document summarizes test results for composite materials including details about the fiber, matrix, fabrication process, test equipment, specimens, environmental conditions, loading parameters, and test procedures. It provides information on the fiber type and properties, epoxy resin and curing agent used, manufacturing and curing details, test machine calibration, specimen dimensions and stacking sequence, temperature and humidity during testing, fatigue loading parameters, and failure results.

Uploaded by

AMIR
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
32 views

D3479/D3479M 96 (Reapproved 2007) Date of Testing: Revision Level or Date of Issue of This Test Method

This document summarizes test results for composite materials including details about the fiber, matrix, fabrication process, test equipment, specimens, environmental conditions, loading parameters, and test procedures. It provides information on the fiber type and properties, epoxy resin and curing agent used, manufacturing and curing details, test machine calibration, specimen dimensions and stacking sequence, temperature and humidity during testing, fatigue loading parameters, and failure results.

Uploaded by

AMIR
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 2

Revision level or date of issue of this test

D3479/D3479M − 96(Reapproved 2007)


method
Date of testing

Location of Testing

Name test operator


Identification of the material
Fiber
 Fiber Specification
 Fiber Type
 Fiber Designation
 Manufacturer Name
 Manufacturer lot or batch number
 Filament Diameter
 Sizing
 Form or Weave
 Fiber areal weight
 Thickness of fabric
 Density
 Tensile strength
 Tensile modulus
 Coefficient of thermal expansion

Matrix

 Name of Epoxy
 Name of manufacturer
 Curing agent
 Equivalent weight of resin
 Density
 Tensile strength
 Tensile modulus
 Coefficient of thermal expansion
 Glass transition temperature

Fabrication

 fabrication start date


 fabrication end date
 Manufacturing Method
 Parameters for manufacturing
 Cure cycles (T, P, Rate, Time)
 Average ply thickness
 Coupon cutting method
 Coupon edge finishing method
 Coupon labelling

Description of laminate
 density
 volume percent reinforcement
 void content
Description of test equipment
 Test machine
 Grips
 Jaws
 Grip pressure
 Alignment results
 Calibration dates
Description of specimens
 number of specimens tested
 dimensions of each specimen
 stacking sequence of the laminate
 mean specimen thickness
Description of environmental conditions
 relative humidity
 temperature of the testing laboratory
Description of the loading
 test control parameter
 frequency
 load ratio
 wave form
 average number of fatigue loading transition
cycles

Test Procedure Procedure A

Number of cycles to failure

Mode of failure for each specimen.

You might also like