Scribd
Upload
289 views5 pages

Steel Beam Load Calc

This document contains steel beam load calculations for several beams in the WJI - ST07 - BENOI FIT OUT project. It provides details on the beam markings, dimensions, grades, spans and applied loads, including self-weight, slab weight, imposed loads, and point loads. Calculations are shown for secondary beams SB-SECONDARY, SB-1, and SB-2, as well as main beams MB1-1, MB2-1, and others.

Uploaded by

hary9100
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
289 views5 pages

Steel Beam Load Calc

This document contains steel beam load calculations for several beams in the WJI - ST07 - BENOI FIT OUT project. It provides details on the beam markings, dimensions, grades, spans and applied loads, including self-weight, slab weight, imposed loads, and point loads. Calculations are shown for secondary beams SB-SECONDARY, SB-1, and SB-2, as well as main beams MB1-1, MB2-1, and others.

Uploaded by

hary9100
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 5

CHODAI - BURO ENGINEERING PTE. LTD.

STEEL BEAM LOAD CALCULATION Date 15-11-2017


PROJECT WJI - ST07 - BENOI FIT OUT Prepared I.HARI AMUDHAN
NUMBER A995-01415-2013-ST07 (AMENDMENT TO ST03) Checked Dr.K.MURUGAPPAN
* Enter the numerical/text values only in the highlighted cells.
Beam details
Beam mark = SB-SECONDARY
Section = UB 203 X 133 X 25 kg/m
Grade = 355 MPa
Storey/Level = 1st Basement Mezzanine
Geometry details L1 = 1 m L2 = 1 m
Beam span,LB = 1.4 m
Beam spacing details
Left, L1 = 1.0 m
Right, L2 = 1.0 m
Load details Dead loads
Self-weight = 0.250 kN/m
(Usually calculated in the software)
Grating/slab = 0.60 kPa
S.D.L = 0.00 kPa
Imposed loads
Imposed loads = 5.00 kPa
Miscallaneous loads (Uniform)
Misc loads 1 =
Misc loads 2 =
Misc loads 3 =
Misc loads 4 =
Miscallaneous loads (Point loads) Location (from left)
Misc loads 1 = Beam considered
Misc loads 2 =
Misc loads 3 =
Misc loads 4 =
Design loading
Self-weight = 0.250 kN/m
S.D.L = 0.000 kN/m
Grating/slab = 0.600 kN/m
Imposed loads = 5.000 kN/m
Miscallaneous loads (Uniform)
Misc loads 1 = 0.000 kN/m
Misc loads 2 = 0.000 kN/m
Misc loads 3 = 0.000 kN/m
Misc loads 4 = 0.000 kN/m
Miscallaneous loads (Point loads) (SDL,IL) (kN)
Misc loads 1 = @m
Misc loads 2 = @m
Misc loads 3 = @m
Misc loads 4 = @m
CHODAI - BURO ENGINEERING PTE. LTD.

STEEL BEAM LOAD CALCULATION Date 15-11-2017


PROJECT WJI - ST07 - BENOI FIT OUT Prepared I.HARI AMUDHAN
NUMBER A995-01415-2013-ST07 (AMENDMENT TO ST03) Checked Dr.K.MURUGAPPAN
* Enter the numerical/text values only in the highlighted cells.
Beam details
Beam mark = SB-1
Section = UB 203 X 133 X 25 kg/m
Grade = 355 MPa
Storey/Level = 1st Basement Mezzanine
Geometry details L1 = 0 m L2 = 0 m
Beam span,LB = 4.0 m
Beam spacing details
Left, L1 = 0.0 m
Right, L2 = 0.0 m
Load details Dead loads
Self-weight = 0.250 kN/m
(Usually calculated in the software)
Grating/slab = 0.00 kPa
S.D.L = 0.00 kPa
Imposed loads
Imposed loads = 0.00 kPa
Miscallaneous loads (Uniform)
Misc loads 1 =
Misc loads 2 =
Misc loads 3 =
Misc loads 4 =
Miscallaneous loads (Point loads) Location (from left)
Misc loads 1 = 1.2,7.0 @ 1.00 m Beam considered
Misc loads 2 = 1.2,7.0 @ 2.00 m
Misc loads 3 = 1.2,7.0 @ 3.00 m
Misc loads 4 =
Design loading
Self-weight = 0.250 kN/m
S.D.L = 0.000 kN/m
Grating/slab = 0.000 kN/m
Imposed loads = 0.000 kN/m
Miscallaneous loads (Uniform)
Misc loads 1 = 0.000 kN/m
Misc loads 2 = 0.000 kN/m
Misc loads 3 = 0.000 kN/m
Misc loads 4 = 0.000 kN/m
Miscallaneous loads (Point loads) (SDL,IL) (kN)
Misc loads 1 = 1.2,7.0@1m
Misc loads 2 = 1.2,7.0@2m
Misc loads 3 = 1.2,7.0@3m
Misc loads 4 = @m
CHODAI - BURO ENGINEERING PTE. LTD.

STEEL BEAM LOAD CALCULATION Date 15-11-2017


PROJECT WJI - ST07 - BENOI FIT OUT Prepared I.HARI AMUDHAN
NUMBER A995-01415-2013-ST07 (AMENDMENT TO ST03) Checked Dr.K.MURUGAPPAN
* Enter the numerical/text values only in the highlighted cells.
Beam details
Beam mark = SB-2
Section = UB 203 X 133 X 25 kg/m
Grade = 355 MPa
Storey/Level = 1st Basement Mezzanine
Geometry details L1 = 0 m L2 = 0 m
Beam span,LB = 2.0 m
Beam spacing details
Left, L1 = 0.0 m
Right, L2 = 0.0 m
Load details Dead loads
Self-weight = 0.250 kN/m
(Usually calculated in the software)
Grating/slab = 0.00 kPa
S.D.L = 0.00 kPa
Imposed loads
Imposed loads = 0.00 kPa
Miscallaneous loads (Uniform)
Misc loads 1 =
Misc loads 2 =
Misc loads 3 =
Misc loads 4 =
Miscallaneous loads (Point loads) Location (from left)
Misc loads 1 = 1.2,7.0 @ 1.00 m Beam considered
Misc loads 2 =
Misc loads 3 =
Misc loads 4 =
Design loading
Self-weight = 0.250 kN/m
S.D.L = 0.000 kN/m
Grating/slab = 0.000 kN/m
Imposed loads = 0.000 kN/m
Miscallaneous loads (Uniform)
Misc loads 1 = 0.000 kN/m
Misc loads 2 = 0.000 kN/m
Misc loads 3 = 0.000 kN/m
Misc loads 4 = 0.000 kN/m
Miscallaneous loads (Point loads) (SDL,IL) (kN)
Misc loads 1 = 1.2,7.0@1m
Misc loads 2 = @m
Misc loads 3 = @m
Misc loads 4 = @m
CHODAI - BURO ENGINEERING PTE. LTD.

STEEL BEAM LOAD CALCULATION Date 15-11-2017


PROJECT WJI - ST07 - BENOI FIT OUT Prepared I.HARI AMUDHAN
NUMBER A995-01415-2013-ST07 (AMENDMENT TO ST03) Checked Dr.K.MURUGAPPAN
* Enter the numerical/text values only in the highlighted cells.
Beam details
Beam mark = MB1-1
Section = UB 406x260x115 kg/m
Grade = 355 MPa
Storey/Level = 1st Basement Mezzanine
Geometry details L1 = 0 m L2 = 0 m
Beam span,LB = 4.0 m
Beam spacing details
Left, L1 = 0.0 m
Right, L2 = 0.0 m
Load details Dead loads
Self-weight = 0.250 kN/m
(Usually calculated in the software)
Grating/slab = 0.00 kPa
S.D.L = 0.00 kPa
Imposed loads
Imposed loads = 0.00 kPa
Miscallaneous loads (Uniform)
Misc loads 1 =
Misc loads 2 =
Misc loads 3 =
Misc loads 4 =
Miscallaneous loads (Point loads) Location (from left)
Misc loads 1 = 0.6,3.5 @ 1.00 m Beam considered
Misc loads 2 = 0.6,3.5 @ 2.00 m
Misc loads 3 = 0.6,3.5 @ 3.00 m
Misc loads 4 =
Design loading
Self-weight = 0.250 kN/m
S.D.L = 0.000 kN/m
Grating/slab = 0.000 kN/m
Imposed loads = 0.000 kN/m
Miscallaneous loads (Uniform)
Misc loads 1 = 0.000 kN/m
Misc loads 2 = 0.000 kN/m
Misc loads 3 = 0.000 kN/m
Misc loads 4 = 0.000 kN/m
Miscallaneous loads (Point loads) (SDL,IL) (kN)
Misc loads 1 = 0.6,3.5@1m
Misc loads 2 = 0.6,3.5@2m
Misc loads 3 = 0.6,3.5@3m
Misc loads 4 = @m
CHODAI - BURO ENGINEERING PTE. LTD.

STEEL BEAM LOAD CALCULATION Date 15-11-2017


PROJECT WJI - ST07 - BENOI FIT OUT Prepared I.HARI AMUDHAN
NUMBER A995-01415-2013-ST07 (AMENDMENT TO ST03) Checked Dr.K.MURUGAPPAN
* Enter the numerical/text values only in the highlighted cells.
Beam details
Beam mark = MB2-1
Section = UB 610x305x179 kg/m
Grade = 355 MPa
Storey/Level = 1st Basement Mezzanine
Geometry details L1 = 1 m L2 = 1 m
Beam span,LB = 10.2 m
Beam spacing details
Left, L1 = 1.0 m
Right, L2 = 1.0 m
Load details Dead loads
Self-weight = 0.250 kN/m
(Usually calculated in the software)
Grating/slab = 0.60 kPa
S.D.L = 0.00 kPa
Imposed loads
Imposed loads = 5.00 kPa
Miscallaneous loads (Uniform)
Misc loads 1 =
Misc loads 2 =
Misc loads 3 =
Misc loads 4 =
Miscallaneous loads (Point loads) Location (from left)
Misc loads 1 = Beam considered
Misc loads 2 =
Misc loads 3 =
Misc loads 4 =
Design loading
Self-weight = 0.250 kN/m
S.D.L = 0.000 kN/m
Grating/slab = 0.600 kN/m
Imposed loads = 5.000 kN/m
Miscallaneous loads (Uniform)
Misc loads 1 = 0.000 kN/m
Misc loads 2 = 0.000 kN/m
Misc loads 3 = 0.000 kN/m
Misc loads 4 = 0.000 kN/m
Miscallaneous loads (Point loads) (SDL,IL) (kN)
Misc loads 1 = @m REFER TO THE PLAN FOR THE
Misc loads 2 = @m
POINT LOADS AND IT’S
RESPECTIVE LOCATION ON THE
Misc loads 3 = @m BEAM
Misc loads 4 = @m

You might also like