Scribd
Upload
107 views1 page

Precast Driven Pile Section Analysis: Input Data

This document analyzes the flexure, shear, crack control, and inertia properties of a precast driven pile section that is 450mm x 450mm. It provides the input data for the pile including dimensions, reinforcement amounts and locations, and material strengths. It then summarizes the results of the flexure, shear, crack control, and moment of inertia calculations to check if the section meets code requirements. The analysis found the section to meet all code check requirements for its moment capacity, shear capacity, crack control spacing, and moment of inertia.

Uploaded by

civixx
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
107 views1 page

Precast Driven Pile Section Analysis: Input Data

This document analyzes the flexure, shear, crack control, and inertia properties of a precast driven pile section that is 450mm x 450mm. It provides the input data for the pile including dimensions, reinforcement amounts and locations, and material strengths. It then summarizes the results of the flexure, shear, crack control, and moment of inertia calculations to check if the section meets code requirements. The analysis found the section to meet all code check requirements for its moment capacity, shear capacity, crack control spacing, and moment of inertia.

Uploaded by

civixx
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

PRECAST DRIVEN PILE SECTION ANALYSIS

Flexure, Shear, Crack Control, and Inertia for Singly or Doubly Reinforced Sections
Per ACI 318-14 Code
Job Name: PRECAST DRIVEN PILE-450mmX450 mm Subject: SECTIONAL ANALYSIS OF PILE
Job Number: MAITREE 2X660MW-STPP-RAMPAL Originator: PRIODEEP CHOWDHURY

Input Data:
b
Beam or Slab Section? Beam
Exterior or Interior Exposure? Exterior
Reinforcing Yield Strength, fy = 72 ksi
Concrete Comp. Strength, f 'c = 5.8 ksi h d
Beam Width, b = 17.712 in.
Depth to Tension Reinforcing, d = 14.627 in.
Total Beam Depth, h = 17.712 in. As
Tension Reinforcing, As = 0.880 in.^2 Singly Reinforced Section
No. of Tension Bars in Beam, Nb = 2.000
Tension Reinf. Bar Spacing, s1 = 12.000 in. d'=2.71'' b=17.712''
Clear Cover to Tension Reinf., Cc = 2.710 in.
Depth to Compression Reinf., d' = 2.710 in. A's
Compression Reinforcing, A's = 0.440 in.^2 =0.44
Working Stress Moment, Ma = 60.82 ft-kips h=17.712'' d=14.627''
Ultimate Design Moment, Mu = 60.82 ft-kips
Ultimate Design Shear, Vu = 15.74 kips
Total Stirrup Area, Av(stirrup) = 0.220 in.^2 As=0.88
Tie/Stirrup Spacing, s2 = 3.0000 in. Doubly Reinforced Section

Results:
Moment Capacity Check for Beam-Type Section: Crack Control (Distribution of Reinf.):
b1 = 0.76 Per ACI 318-05 Code:
c= 0.000 in. Es = 29000 ksi
a= 0.000 in. Ec = 4341 ksi
rb = 0.02847 n= 6.68
r= 0.00340 fs = 60.57 ksi
r(min) = 0.00317 fs(used) = 48.00 ksi
As(min) = 0.822 in.^2 <= As = 0.88 in.^2, O.K. s1(max) = 14.31 in. >= s1 = 12 in., O.K.
ρ(temp) = N.A. (total for section)
As(temp) = N.A. in.^2 (total) Per ACI 318-95 Code (for reference only):
ρ(max) = 0.02230 dc = 3.0850 in.
As(max) = 5.778 in.^2 >= As = 0.88 in.^2, O.K. z = 265.16 k/in.
e's = -0.00259 z(allow) = 319.00 k/in. >= z = 265.16 k/in.,
f's = N.A. ksi (A's does not yield) O.K.
et = 0.04296 >= 0.005, Tension-controlled
f= 0.900
ΦMn = 67.78 ft-k >= Mu = 60.82 ft-k, O.K.

Shear Capacity Check for Beam-Type Section: Moment of Inertia for Deflection:
fVc = 29.60 kips fr = 0.571 ksi
fVs = 57.92 kips kd = 2.7978 in.
fVn = 87.52 kips >= Vu = 15.74 kips, O.K. Ig = 8201.42 in.^4
fVs(max) = 118.38 kips >= Vu-(phi)Vc = 0 kips, O.K. Mcr = 44.08 ft-k
Av(prov) = 0.220 in.^2 = Av(stirrup) Icr = 951.94 in.^4
Av(req'd) = 0.000 in.^2 <= Av(prov) = 0.22 in.^2, O.K. Ie = 3711.91 in.^4 (for deflection)
Av(min) = 0.042 in.^2 <= Av(prov) = 0.22 in.^2, O.K.
s2(max) = 7.314 in. >= s2 = 3 in., O.K.

1 of 1

You might also like