Scribd
Upload
104 views2 pages

PHP 47 B6

Michael Mitchell has over 20 years of experience as a CNC Machinist and Millwright. He has worked for several companies including Vought Aircraft, K and K Iron Works, D's Iron, and Air Products Chemical Membrane. His responsibilities have included producing large wing components, programming and operating CNC machines, interpreting blueprints, and maintaining manufacturing equipment. He is certified in crane and forklift operation and familiar with GMP standards, LEAN, and OSHA.

Uploaded by

Abrar_Ashraf
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as RTF, PDF, TXT or read online on Scribd
104 views2 pages

PHP 47 B6

Michael Mitchell has over 20 years of experience as a CNC Machinist and Millwright. He has worked for several companies including Vought Aircraft, K and K Iron Works, D's Iron, and Air Products Chemical Membrane. His responsibilities have included producing large wing components, programming and operating CNC machines, interpreting blueprints, and maintaining manufacturing equipment. He is certified in crane and forklift operation and familiar with GMP standards, LEAN, and OSHA.

Uploaded by

Abrar_Ashraf
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as RTF, PDF, TXT or read online on Scribd
You are on page 1/ 2

Michael Mitchell

314 West Alton


Marine Illinois
618-402-7603
618-887-2000

EXPERIENCE:

Vought Aircraft , Nashville , TN


CNC Machinist 9-2008 to 1-2009
Produced various wing components - some measuring more than 100 feet long - for the
AirBus A330/A340-300-500-600 programs. Align and secure holding fixtures, cutting
tools, attachments, accessories, and materials onto machines. Check work pieces to
ensure that they are properly lubricated and cooled. Dismantle machines and equipment
using hand tools and power tools in order to examine parts for defects and replace
defective parts where needed. Fit and assemble parts to make or repair machine tools.
Lay out, measure, and mark metal stock in order to display placement of cuts. Machine
parts to specifications using machine tools such as milling machines, shapers, and
grinders. Maintain industrial machines. Measure, examine, and test completed units in
order to detect defects and ensure conformance to specifications, using precision
instruments such as micrometers. Monitor the feed and speed of machines during the
machining process.

K and K Iron Works , Chicago , IL


CNC Machinist 3-2005 to 2-2008
Program and operated Peddinghaus Plasma Table & Drill Machines. Read and interpret
blue prints, sketches, and product specifications to determine best sequence and methods
for fabrication of products at close tolerances. Review, alter, and when needed, created a
program at the CNC control panel as dictated by production and engineering needs. Daily
responsibilities include; loading and identifying the needed material (ordering new
material). Checking the material thickness and type of iron to meet engineering
specifications. Tool selection, changing and sharpening. Fully servicing, maintaining,
troubleshooting and diagnosing potential problems with the equipment on a daily basis to
ensure manufacturing runs smoothly.

D's Iron , Washington Park , IL


CNC Machinist 8/2002 to 2/2005
Worked as a Millwright in a fast paced structural steel fabrication shop. Maintaining
many types of CNC and manufacturing equipment. Setup and operated Cincinnati, Fadal,
Hurco, Henry Line and Hadtman Mills. Provided leadership in structural steel
fabrication. Operated and maintained overhead cranes, forklifts, and front loader.

Air Products Chemical Membrane


St Louis , Mo
Chemical Operator 6-2001 to 6-2002
Assisted in the process of making a fiber that is used for the separation of nitrogen from
oxygen. Daily responsibilities include; Batch making, changing out chemical, monitoring
the computer system to ensure manufacturing is running correctly. Troubleshooting,
repairing and maintaining lab equipment.

D's Iron
Washington Park , IL
CNC Machinist 5/1995 to 1/2001
Worked as a Millwright in a fast paced structural steel fabrication shop. Maintaining
many types of CNC and manufacturing equipment. Setup and operated Cincinnati, Fadal,
Hurco, Henry Line and Hadtman Mills. Provided leadership in structural steel
fabrication. Operated and maintained overhead cranes, forklifts, and front loader.

EDUCATION
Computer Learning Center
Philadelphia, PA.
Computer programming Courses

SKILLS
Certified Crane and Forklift operator.
Familiar with GMP's, LEAN and OSHA standards
Read Blueprints

You might also like