Foil (Fluid Mechanics)
Foil (Fluid Mechanics)
Foil (Fluid Mechanics)
A foil is a solid object with a shape such that when placed in a moving fluid at a suitable angle of attack the lift (force generated
perpendicular to the fluid flow) is substantially larger than the drag (force generated parallel the fluid flow). If the fluid is a gas, the
foil is called an airfoil or aerofoil, and if the fluid iswater the foil is called a hydrofoil.
Contents
Physics of foils
Basic design considerations
Lifted Weight
See also
References
External links
Physics of foils
A foil generates lift primarily as a result of its shape and angle of
attack. When oriented at a suitable angle, the foil deflects the
oncoming fluid, resulting in a force on the foil in the direction
opposite to the deflection. This force can be resolved into two
components: lift and drag. This "turning" of the fluid in the vicinity
of the foil creates curved streamlines which results in lower pressure
on one side and higher pressure on the other. This pressure
difference is accompanied by a velocity difference, via Bernoulli's
principle, so the resulting flowfield about the foil has a higher
Streamlines around a NACA 0012 airfoil at
average velocity on the upper surface than on the lower
moderate angle of attack
surface.[1][2][3][4]
Since even a simple flat plate can generate lift, a significant factor in foil design is the minimization of drag. An example of this is the
rudder of a boat or aircraft. When designing a rudder a key design factor is the minimization of drag in its neutral position, which is
balanced with the need to produce sufficient lift with which to turn the craft at a reasonable rate.[8]
Other types of foils, both natural and man-made, seen both in air and water, have features that delay or control the onset of lift-
induced drag, flow separation, and stall (see Bird flight, Fin, Airfoil, Placoid scale, Tubercle, Vortex generator, Canard (close-
coupled), Blown flap, Leading edge slot, Leading edge slats), as well as Wingtip vortices (see Winglet).
Lifted Weight
Lifted weight is proportional to lift coefficient, density of fluid, wing area and true
speed by square. A comparison of lifted weight as a function of altitude and depth
reveals big differences by a factor of about 3’000in total from 11 km above sea level
to 10 km below sea level, divided into factors of: ~ 4 between summit and sea level,
~ 400 between flying close to the ground and planing on water, ~ 2 between planing
on water and in a fully submerged state. The most dramatic changes are due to
different fluids and levels of altitude. The most interesting sector to discuss lift is
close to sea level: aircraft approaching the ground, plates planing on water and
hydrofoils only barely submerged in water. There is one basic similarity across of
these: Almost any shape, as long as it is not too thick, will work as an (air)foil and Lifted Weight as a Function of
produce lift when the angle of attack is in the right [9]
range. Altitude and Depth from 20 km above
to 10 km below sea level: by a wing
of 100 m by square (aspect ratio
See also 10:1) at speed of 10 m/s.
External links
http://www.grc.nasa.gov/WWW/k-12/airplane/right2.html
http://www.grc.nasa.gov/WWW/k-12/airplane/lift1.html
http://www.grc.nasa.gov/WWW/k-12/airplane/bernnew.html
http://wright.nasa.gov/airplane/shape.html
http://www.grc.nasa.gov/WWW/k-12/airplane/wrong2.html
https://www.flickr.com/photos/trektrack/2388729621/
https://www.youtube.com/watch?v=o81WIfjrt5I
https://www.youtube.com/watch?v=A06L-npXvDM
http://people.eku.edu/ritchisong/554notes3.html
Text is available under theCreative Commons Attribution-ShareAlike License ; additional terms may apply. By using this
site, you agree to the Terms of Use and Privacy Policy. Wikipedia® is a registered trademark of theWikimedia
Foundation, Inc., a non-profit organization.