Eurolux R - en

Download as pdf or txt
Download as pdf or txt
You are on page 1of 1

technical data sheet

revision date : 03/05/2015


- product name : EUROLUX R
Product is compliant with directive 2004/42/EC pictogram legend
building sector 2004/42 Reference to EC Directive
see note 1 IIAj Annex, Table and Sub-category of product
2004/42 (500) Limit value of VOC with reference to the product sub-category
IIAi(500)500 500 Maximum VOC content in product ready for use

IT CAN BE PRODUCED IN TINTING SYSTEM : note 1: 0% thinning - use pre-heater


VSR BINDER 80 VRAP BINDER 85
BPN 20 BPN 15

- general features VRAP


Industrial synthetic enamel, based on modified alkyd resins. specific weight :min. 1,200 g/l - max. 1,400 g/l
Fast drying.
Excellent covering property. solid content : by wgt = min. 56,0 % - max.60,0 %
Good elasticity. by volume = min. 49,0 % - max. 51,0 %
Good weather resistance.
Very high gloss.
viscosity DIN 4/25°C : min. 120'' - max. 150''
Good resistance to water.

film appearance : gloss 90 gloss

- use colour : on demand


Suitable for painting equipment and industrial/agricultural
machinery, earth moving machines, cranes etc. and product type : One-component
wherever good outdoor durability, rapidity of use and an
appealing aesthetic effect are requested; does not shrivel dry film thickness : 40 - 50 microns
even where thick 70-80 µm coats are applied.
To accelerate drying times we recommend using QA 2054
theoretical coverage : min. 7.0 m²/l - max. 10.0 m²/l
catalyst at 10%.

drying at 25°C : dust free : 10 minutes


touch free : 60 - 70 minutes
- recommended cycles depth : 9 - 10 hours
Apply one or two coats of EUROLUX R on (nitro-resistant) polymerised : about 7 days
anti-rust products or primers, in compliance with overcoating
times. baking : 50 minutes at 60 °C
It is not advisable to apply dry film thickness (DFT)
exceeding 100 µm.
temperature resistance : 80°C

overcoating time :
- application and thinning method min.: after 7 days - max.: within 20 days
spray : 15 - 20% with X 100 (synthetic) or X 2 (nitro)
airless : 10 - 15% with X 100 (synthetic) or X 2 (nitro) shelf life : 12 months at + 5/35°C.
VSR
specific weight :min. 1,000 g/l - max.1,200 g/l Since this product is based on drying oils, the residue left over
in the filters and cloth steeped in the product can undergo
solid content : by wgt = min. 50,0 % - max. 54,0 % spontaneous combustion. Steep them in water
and store them in waterproof containers while awaiting disposal.
by volume = min. 47,0 % - max. 49,0 %

Above mentioned information is based on our best experience, nevertheless, because of the different situations that may occur during
practical use, it is to be considered as merely indicative.
EP vernici s.r.l. Via Roma,12 I-48027 Solarolo (RA) tel.+39 0546 53322 fax +39 0546 53323 email: [email protected] www.epvernici.it

You might also like