Brevetti - Esteiras Catalogo Cat E 22

Cable Chains
Catalogue 2009.02
Summary
Company Profile 1
Technical Information 2
Nylon Cable Chains 3
Steel Cable Chains 4
Cable Chain Cables 5
Enquiry and Order Form 6
Overview of Products Range 7

Brevetti Stendalto
Brevetti Stendalto is the name of the

Company founded almost 40 years ago when
a highly dynamic new demand, emerging
from the boost of automation concepts, was
spreading over the most developed
industrialized countries.
At that time, Mr.Giovanni Mauri (President

and founder of Brevetti Stendalto) designed
and started proposing nylon cable chains to
be applied where steel cable chains were too
heavy and expensive to fulfil customers’
needs. 1989
Patent for the circular nylon cable chain.
Looking beyond, he got off more than a new

line of products, he gave the original profile
to the Company: a successful collection of
innovation, technical support, pragmatic
solutions and products with the best cost &
benefit ratio, able to give customers a real
added value to the long-term partnership with
Brevetti.
The constant evolution of the Company is

presently borne through a wide range of
plastic, steel and stainless steel chains for all
kinds of applications, new modern premises
in Monza and Mesero, branches in France and
Germany and a consolidated worldwide sales
network.
2
Glancing at short-term future, Brevetti is
working on three main directions:
development of customized chains for special
projects, support to buyers and designers to 1
make their choices more efficient through a
real problem-solving approach, and extension
of our range of standard products,
The latter, in particular, is necessary to meet

the newest market requirements for higher
performances with acceptable costs. Brevetti’s
greater and greater experience in all industrial
sectors makes it easier.
We in Brevetti believe that some special

applications, such as offshore platforms and
harbour cranes, must be faced with non-
ordinary means. That is why we decided to
give our customers the support of a “Special
Projects Division” available to study
customized solutions all over the world.
We always keep in mind that our customers

have to be “free to project”. This is Brevetti
Stendalto’s philosophy, and to empower it,
we can offer our “Total Chain System”, a new
concept of cable chains completely finished Chain testing rig for long travel: Tests at 8 m/s for 130 m travels.
with extra flexible cables and connectors.
From the customer’s point of view, it means
saving costs due to wiring, assembling and
installation time, reducing possible problems,
and being certain to choose components of
the highest reliability available on the market.
So, let’s keep on growing together, still going

ahead.
Chain complete with cables

and connectors: Plug & Play
solution.
3
Versatile Automation
Each aspect of production, whether it be the

preparation of moulds and their subsequent
shaping or component manufacture and assembly,
1 is monitored closely.
The Company endeavours to adopt the most
up-to-date technology available. Considerable
resources are invested into this, ensuring the
highest standard of products on the market.
Production moulds are manufactured using
modern CNC machine-tools.
Mould of Light series cable chain.
Brevetti Stendalto manufacturing process
(internal moulding department and complete
automated assembly lines) ensures quality and
short delivery times.
Complete automated assembly lines ensure a high
standard of quality chains.
Products
Nylon cable chains
Steel cable chains
Cable chain cables

Production moulds are
manufactured using modern
CNC machine-tools.
Completely automated assembly

lines ensure a high standard of
quality chains.
Production moulds are

manufactured using modern
CNC machine-tools.
4
UNI EN ISO 9001:2000
In Brevetti Stendalto the quality is a result of our activities.

To be a success and reference company Brevetti Stendalto strives for:
• full satisfaction of our customers ever increasing requests.
• continuing improvement of our company capacities.
1
• valorization and improvement of our human recourses.
• involvement of all our staff in striving for quality assurance.
• careful selection of suppliers and involvement of these in our quality process.
• standardization of production, to assure competitive products.
• innovative products to meet the markets ever increasing requests.
• fast assistance to guarantee the customers reduced breakdown time.
Tender
Acceptance of order
Special design
Standard mail-order catalogue
Design
Needs
Production
Assembly
Handing
Certificate Delivery
UNI EN ISO 9001:2000
Customer's Service
Operative flow diagram
5
The Way to Automation
Past experience acquired in the marketing of Our products can be found in many applications,
machine tools has prompted Brevetti Stendalto to especially in the field of automated production,
1 diversify its proposals. Today, thanks to products

from Brevetti Stendalto, present day problems in
for example in industrial robots and machinery
for crafting metal, wood and stone.
cable and tubing protection are solved in the
best possible way.
Welding robot equipped Steel chain BS 3000.

with nylon chains.
SR 318 for long travel distance on

a crane application.
Machine tools equipped with Circular nylon chains on

Heavy series cable chains. welding robots.
Wending robot
equipped with
a nylon cable chain
type SR510 and
guide support.
6
Brevetti Stendalto products are used in many, We are always close to our Clients. Our
very different, fields of application. We have distribution network, consisting of manufacturing
experience ranging from packaging & automated
handling, storage and transportation to providing
plants, sales companies and warehouses, is
spread across the entire world. 1
solutions used in all fields of engineering like
mining, offshore drilling, building, in steel works,
ports and terminals.
BS 3500 steel chains with

supporting frame applied to
De Icing’s equipment at
München airport (Germany).
SR310 plastic chains and

BS4500 stainless steel chains
applied to “Oresund Bridge”
between Sweden and
Denmark.
7
Always Available
Each Client is important to Brevetti Stendalto

regardless of the needs and the size of his request.
Brevetti Stendalto offers professional support for
1 assessing the Client’s needs, consultation
inherent to the choice of products, design of new
products, design of a new product and
visiting client installations.
Technical Office
Competence and availability are the key words in
technical assistance.
All technical needs and installation characteristic
requests are carefully evaluated and verified with
the support of informatics and CAD-3D
projection that will solve the problems as they
arrive.
Computerised stock
All cable chains are studied management and control
with the support of system ensures short delivery
CAD-CAM systems. times.
Brevetti Stendalto’s technical

office is the reference-point for
information.
8
1
To offer a rapid and always updated commercial

and technical information, Brevetti Stendalto has
introduced a new web-site
www.brevettistendalto.it
in which all necessary info is available for fast
chain selection and easy downloads of chain
characteristics.
For direct technical support, please contact our
Technical Dept. at
[email protected]
which will assist you with specific technical
questions, customized chain solution,
CAD drawings, etc.
Brevetti Stendalto is always

close to customers, ensuring
assistance from project
analysis up to final
installation and after sales
support.
9
Technical Information
Necessary data to determine the type of cable chain page 12

Placement of cables/hoses in the cable chain page 13
Mounting Variations
Chains placed horizontally page 14
Chains placed vertically page 16
Chains with circular motion page 17
2
Going Further
Self-supporting capacity page 18
Determining the length of the chain page 19
Vertical applications page 20
Horizontal applications (side-mounted) page 21
Long horizontal travel distances page 22
Guide channels for sliding chains page 24
How to install the cable chains in the guide channel page 25
Rotating horizontally page 26
Rotation with Robot type chains page 28
Support roller units page 30
Way of mounting end brackets page 31
Guide channel page 32
Split cross pieces from the Heavy/Sliding series page 33
Materials used page 34
11
Necessary Data to Determine
the Type of Cable Chain
The choice of cable chain should not only be

based on a mathematical calculation of certain
factors but should consider and analyse
carefully all the available data. The following
information will be provide a basic help in
making the right decision.
Thanks to thirty years of experience in this

sector we have a highly competent technical LS
2 staff which is at your disposal to help solve any
problem relating to the use of cables in any
kind of application.
To request a personalised project please fill out
the form found on page 205. It will be a
pleasure for us to find an immediate solution to
your problem. Determining the length of the travelling distance LS.
The dimensions of the cable chain in relationship to the

dimensions of cables/hoses.
Determining the radius of curvature of the cable chain in

relationship to the flexibility characteristics of cables/hoses.
Kg
Verifying the self-supporting capacity of the cable chain in

relationship to the weight per metre of cables/hoses.
12
Placement of Cables/Hoses
in the Cable Chains
To guarantee that cable chain functions

properly and to avoid any damage to the
cables/hoses within, certain criteria concerning
the placement must be followed:
MIN 10% MIN 20%
For electric cables a clearance of at least 10% between the Avoid placing cables/hoses that have different sheath finishes
placement of the cable and it’s diameter has to be so that friction can be eliminated.
guaranteed; for hydraulic hoses the clearance should be at (e.g. hydraulic cables and hoses).
least 20%.
D D
In the application of several cables/hoses it is preferable to Place cables/hoses in a symmetrical way according to their
avoid them rubbing each other by placing them singularly in dimensions and weight placing the largest and heaviest
the appropriate space and separating them from each other externally and the smaller and lighter internally.
by the separators. If this is not possible, verify that the
internal space does not allow the rubbing of the
cables/hoses. (H< D).
For further information on how to install cables/hoses A BS3000 chain in steel

see page 202. with three bands and
separations between
electric cables and
hydraulic hoses..
13
Mounting Variations
Chains Placed Horizontally

Brevetti Stendalto chains, thanks to a large
range of models and versions, satisfy many
requirements in variety and combination of
motions. On this page the various combinations
of mounting are listed.
For further information about realising a
personalised project please contact our
2 technical department. They are at you disposal

to resolve any specific problems you may have
and can design according to your particular
request.
Horizontal with mobile point above.
Horizontal with mobile point below Horizontal with mobile point below.
(to the car).
Combination of both vertical and horizontal movement. Superimposed chains.
14
2
Chains positioned in parallel. Long horizontal - 1 chain
(see page 22).
Chain making a ring configuration. Long horizontal - 2 chains

(see page 22).
Model SR700
chains in nylon
superimposed on a machine
which works with marble.
Horizontal with chain mounted on its side

(see page 21).
15
Mounting Variations
Chains Placed Vertically

Brevetti Stendalto chains also provide answers
to problems concerning vertical motion. Thanks
to their particular design Brevetti Stendalto
cable chains can also be used in applications
with extremely long travel distances.
Vertical with curve below Combination of both vertical and horizontal movement.
(see page 20).
Vertical with curve above

(see page 20).
SR355 vertical with curve

below nylon chain on
machine tool.
16
Chains with Circular Motion
The problems regarding circular motion are
easily resolved with the chains from the ROBOT
series, an exclusive Brevetti Stendalto product.
It is also possible to use the chains in
counter-rotation configuration by mounting them
on their side.
Chain for circular movement - 1 chain Chain for circular movement - 2 chains
(see page 26). (see page 26).
ROBOT type chain for circular motion.

(see page 28).
Robot for welding with chains

in nylon.
17
Self-Supporting Capacity
A fundamental element in cable chains is the necessary to use the appropriate support rollers
pre-set Z (Fig. A). (see page 30), in order to confirm chain
This determines the self-supporting capacity, a reliability in exceptional applications.
characteristic which allows the cable chain to All the H-heights reported into this catalogue
support not only it’s own weight, but also the are not including any Z-value due to the
weight of the cables/hoses placed in it and to preload, therefore, whenever limitations to the
keep its parallel or slightly curved upward maximum allowable heigth are required, you
position (Fig. B). should refer to Brevetti Stendalto's Technical
The diagram of self-supporting capacity (Fig. C), Dptm.
2 indicates the weight relation of cables/hoses per
linear meter to the lengths of self-supporting
Brevetti Stendalto chains, thanks to their
specific construction, reach remarkably high
values of self-supporting capacity and
chain travel. The red-area indicates the difference
between min/max chain widths, while the widest acceleration with long periods of motion,
version has the lowest self-support capacity. reaching millions of cycles.
With the application of cable chains with LS For particular applications (e.g. vertical travel),
and weights not included in the area of the 2 the chains can be provided without pre-set.
diagram of self-supporting capacity, it’s
Fig. A Fig. C
30
20
Narrowest chain version
15
10
8
6
5
4
Fig. B 3
Additional load (kg)
2
Widest chain version
1,5
1
0 1 2 3 4
LS Max unsupported length
2
Nylon chain, type SR310, in

18 a self-supporting state.
Determining the Chain length
Fixed point at the centre of total travel.
LS
LS
2
R
M 2
L= LS + M
2
The chain length (L) is calculated by summarising the half stroke LS to the nominal value (M)
2
of the bending radius.
The value is then rounded up the multiply of the chain's pitch for nylon cable chains and to an
odd multiply for steel chains.
Fixed point not positioned at the centre of total travel.
LS
LS
2
R
DPF
L= LS + M + DPF
2
LS
The chain length (L) is calculated by summarising the half stroke 2 to the nominal value (M)
of the bending radius and the distance (DPF) from fixed point to centre of total stroke.
The value is then rounded up the multiply of the chain's pitch for nylon cable chains and to an
odd multiply for steel chains.
Where:
L = Length of chain
LS = Half travel distance
2
M = Length of curve (π x R) + (2 x P)
DPF = Distance from fixed point to centre of total stroke
P = Pitch
19
Going Further
Vertical Applications The use of standard cable chains for vertical

The problems related to vertical applications applications could result in difficulties due to the
are solved by using Brevetti Stendalto cable pre-set. we therefore recommend to specify:
chains. It is however necessary to respect the “without pre-set for vertical applications” when
following: ordering. By doing this the cable chain will be
delivered to you without pre-set.
The placement of the cable/hoses is very important to ensure If the application only concerns one vertical movement the
the application works properly. Cables/hoses have to be fixed cable chain does not need any particular support.
at both ends using the appropriate accessories so as not to
make their weight disturb the cable chain. In this type of
application the cable chain should only guide the
cables/hoses during their movement.
If the cable chain also moves across and/or longitudinally, When applying the cable chain in this way some support is
certain measures have to be taken laterally. For special needed to avoid the chain to unbalance itself outwardly.
applications, frames with completely closed guiding systems Generally the cable chain must be supported both on the
are available. fixed and mobile points.
20
Going Further
Horizontal Applications on Their

Sides
Brevetti Stendalto cable chains can be
mounted on their sides.
GUIDING CHANNEL
This kind of mounting becomes necessary when there is a For particularly long applications a guiding channel can be
limited space upwards and mounting the chain normally designed.
would take up too much space.
PIVOTING WHEEL
ANTI-FRICTION SKID
To make the movement easier and to reduce any friction on If there is no possibility for a plane to support the cable chain
the cable chain, special changeable anti-friction skids or during it’s movement, Brevetti Stendalto chains can be
pivoting wheels have been designed. applied without support taking into consideration the
following factors:
- total travel distance LS
- added weight
- velocity and acceleration
- frequency of usage
For this kind of application, it is recommended to discuss

SPLIT CROSS-PIECE
with our technical office.
SPACER
SEPARATOR
Particular attention should be drawn to determine the section

of the cable chain, in fact, the mounting on it’s side of the
chain means that cables/hoses have a tendency of bunching
towards the ground and being squashed.
To avoid this, there are special spacers which are positioned
between the separators or otherwise special split aluminium or
PVC cross pieces to be applied. 21
Going Further
Long Horizontal Travel Distance Sliding series is the integrated sliding skid which
Cable chains are used more frequently on long permit the chains to slide on themselves
travel distances as a valid alternative to the reducing the friction due to the special
traditional systems of conductor bars or to polymers used.
festoon systems, and offer the following The dimensions of the skid allow the chain to
advantages: keep itself stable in applications with high
velocities.
• The possibility of the combined transportation On request it’s possible to produce cable chains
of hydraulic cables/tubes.
2 • The possibility of use also in critical
environments (humidity, textile dust, negative
with special polyamides for applying in
particularly aggressive environments.
The triple pins guarantee more reliability and
chemical and atmospheric components etc.). strength even in applications with the added
• High velocities and values of acceleration. weight being very high. The chains in the Sliding
• Notably shorter installation times. series have been tested using torsion, wear and
• Drastic reduction in the time taken for tear tests passing the tensile yield stress with
maintenance. extremely good results, above high normal
values (e.g. SR318 21000 N).
The special aspect of the cable chains in the
In these applications, the

chain without self-
supporting capacity, slides in
it’s own guiding channels. LS
For the first half of the travel LS LS
distance the chain slides on 2 2
itself, whilst in the second
R
half it is supported by it’s

own rollers or plates for
sliding.
In double chain
applications, the chains
slide on themselves in both
directions.
LS
LS LS
2 2
R
A particular of the skid in

the sliding of the chains in
the Sliding series.
Skids
22
2
SR318 type chain.
SR318 type chain.
23
Going Further
Guide Channels for Sliding

For good results when using cable chain in an
application with a long travelling distance it is
necessary to respect the following instructions
when installing the guide channel for sliding:
2
Verify that the sides are aligned properly to avoid any internal
edges in the guide channel which could disturb the cable
chain’s route.
Verify that the plane on which the guide channel for sliding is
mounted is perfectly aligned and smooth.
Guide channel for chains Verify that the distance between the guide channel for
of the Sliding series. sliding and the towing arm is the same for the whole
travelling distance.
24
How to Install the Cable Chains
MOVABLE END BRACKETS
in the Guide Channel
AT THE MOVING POINT
For a perfect installation of the cable chain in the
guide channel you should take the following
steps::
2
20
STANDARD END BRACKETS

AT THE FIXED POINT
Install the cable chain with the standard end brackets at the
fixed point and with the movable end brackets at the moving
point respecting the height listed in the catalogue.
MAX 500 mm
Reduce as much as possible the distance between the fixed Install the mobile point of the cable chain aligning it exactly to
point of the cable chain and the starting point of the rollers or the longitudinal travel distance in such a way so that during
sliding plane. its movement it does not touch the internal part of the guide
channel (Fig. A).
MAX 500 mm
In the case of a double chain application ensure that the To facilitate this operation Brevetti Stendalto has developed
distance between the two fixed points doesn’t exceed 500mm. and created a special movable end bracket which guarantees
a perfect alignment between the chain and the towing arm
(Fig. B).
25
Going Further
Rotating Horizontally PROTECTION series, can be supplied with this

For certain applications it necessary that the counter-radius. Generally the chains with count-
cable chains perform an opposite movement er-radius are used to resolve the problems rela-
from that determined by the radius of the tive to rotations where, in this case, it would not
curvature (counter-radius chains). All Brevetti be possible to use cable chains from the
Stendalto chains, except those from the ROBOT series.
2
GUIDE HOUSING
IUS INNER MOVABLE

AD
R-R FRAME
NTE
U
CO
RA
DI
US
With the use of counter-radius chains it is possible to create For applications with rotations over 180° it is necessary to
rotations both on small and large equipment use two cable chains. For a correct usage they should be
(e.g. parabolic antennas, rotating tables, cranes, telescopes). guided both internally and externally. A special inner movable
frame, mounted on anti-friction skids or pivoting wheels in
combination to the guide housing guarantees the rotation.
GUIDE HOUSING
GUIDE HOUSING
INNER MOVABLE
FRAME ANTI-FRICTION
SKIDS
For applications with rotations up to 180° it is possible to use

only one cable chain. For a correct usage it should be
installed with a guide housing. GUIDE HOUSING
INNER MOVABLE
FRAME
To facilitate the sliding and reduce the friction of the cable PIVOTING
chain, special changeable skids or pivoting wheels are taken WHEELS
into account.
With this kind of application it is also possible to rotate
vertically.
Seen the particular aspects of these applications we advise
you to contact and consult our technical office.
26
Application of Horizontally
Rotating Chains
Chains can reach a maximum rotation of 540°.
For a correct usage they should be
guided both internally and externally.
Application with 2
superimposed chains.
Rotation 180°
2
Application with 2 chains.

Rotation 370°
27
Rotation with ROBOT Type Chains The chains from the “ROBOT” series, like all
In its continuous technological evolution, Brevetti Stendalto chains, can be modified for
Brevetti Stendalto has revolutionised since work in special applications.
1989 the concept of circular chains introducing When the use of one cable chain is not
the chains from the “ROBOT” series that, due sufficient to contain all the cables/hoses it’s
to the particular construction of the links, possible to use several chains in the same
permit them to rotate up to 540°. application to increase the space
to hold them.
2
Supporting Hook
This must be selected according to the method
of chain fixation.
-Left type with left fixed point chain (A)
-Right type with right fixed point chain (B)
SUPPORTING ROLLER
SUPPORTING HOOK
A B
Fig. A
The stability of the chains permits rotations at higher The chains from the “ROBOT” series are self-supporting and
velocities without the need for guiding supports. they do not need any support up to 200°. For applications
Only the base on which the cable leans has to have a with rotations exceeding that value it is necessary to use its
configuration inclined to make its own travel distance easier. own appropriate accessories. To reduce the problems of
Appropriate support guides are available if it is not possible taking up too much space which generally is the case with
to take them directly from the machine. the supports, especially on robots, Brevetti Stendalto has
developed a series of supports which are capable of solving
the problem.
Welding robot
equipped with
a nylon cable chain
type SR510
and guide support.
28
Applications with Robot Series
Chains
Using support rollers or support hooks, chains
can reach a maximum rotation of 540°.
Support rollers view.
Support hooks view.
29
Going Further
Support Roller Units necessary to use the appropriate support

For applications of cable chains with LS
2
rollers.
and weights not included in the area To decide on the number of support rollers
of the diagram of self-supporting capacity it is needed, note the following:
One Support Roller when: Two Support Rollers when:
The length LS3 is included in the values of The length LS

4 is included in the values of
the diagram showing self-supporting capacity. the diagram showing self-supporting capacity.
Support Roller for Nylon Chains Support Roller for Steel Chains
Chain Type X Y L
BS2000 70 100 W+22
BS3000 70 100 W+22
BS3500 70 100 W+26
BS4000 70 100 W+26
BS4500 130 180 W+26
30
Ways of Mounting End Brackets installed in the four positions seen below. For
The end brackets make the installation of the the end bracket in steel instead it is
chains possible. They are available both in nylon necessary to specify the position of mounting. If
and in steel. The end brackets in nylon, due to this is not specified it will be supplied in Pos.1.
their particular construction with holes for Our technical office is at your disposal to solve
mounting on three sides, allow the chain to be any installation query.
Pos. 1 Pos. 2
Pos. 3 Pos. 4
Chain Type Nylon End Brackets Steel End Brackets

Pos.1 Pos. 2 Pos. 3 Pos. 4 Pos. 1 Pos. 2 Pos. 3 Pos. 4
SR200... S - - - - - - -
SR250... S O O - - - - -
SR30090-SR30091 - - - - S R R O
SR325LI/LE S S S - S S S O
SR325L... / SR325PI... S S S - S S S O
SR339... - - - - S S S O
SR300A... S - - - S O O O
SR300... - - - - S R R O
SR305A... S S S S S O O O
SR305... S S S S S R R O
SR355A... S S S S S O O O
SR400... S S S - S O O O
SR435... S S S S S R R R
SR445... S S S S S R R R
SR660A... S S S S R R R O
SR770A... S S S S R R R O
SR475... - - - - S R R O
SR310T... - - - - S R R O
SR660... S S S S R R R O
SR770... S S S S R R R O
SR309C... S S S S S R R O
BS2000... - - - - S S S S
BS3000... - - - - S S S S S= Standard
BS3500... - - - - S S S S
R= On request
O= Special production
BS3500C... - - - - S R R O
- = Not available
BS4000... - - - - S R R O
BS4000C... - - - - S R R O
BS4500... - - - - S R R O
31
Going Further
Guide Channel Chain type A5 H S

For a correct functioning of the cable chain it is mm mm mm
necessary that during it’s movement it lies on a SR200... A+2 10 1,5
flat surface. If these conditions do not exist a SR250... A+2 10 1,5
guide channel is necessary. SR30090-SR30091 A+2 15 1,5
SR325LI/LE... A+2 25 1,5
SR325L... / SR325PI... A+2 25 1,5
SR339... A+2 30 1,5
2 SR300A...
SR300...
SR305A...
A+2
A+2
A+2
15
15
20
1,5
1,5
1,5
SR305... A+2 20 1,5
SR355A... A+2 25 1,5
SR355... A+2 25 1,5
SR400... A+2 25 1,5
SR435... A+2 30 1,5
SR445... A+2 30 1,5
SR660A... A+2 30 1,5
SR770A... A+2 30 1,5
SR475.... A+2 50 1,5
SR306... A+2 30 1,5
SR307... A+2 30 1,5
SR308... A+2 40 1,5
SR309... A+2 50 1,5
SR310T... A+2 80 1,5
SR660... A+2 30 1,5
SR770... A+2 30 1,5
BS2000... W+2 30 1,5
BS3000... W+2 40 1,5
BS3500... W+2 50
BS4000...*
BS4500...*
*Seen the particular aspects of these chains we advise

consultation with our technical office.
The guide channel is delivered in laminar zinc in pieces of
2000 mm. It is available on request in stainless steel.
Guide channel for chain type SR355.
32
Split Cross Pieces
Heavy/Sliding Series
The chains from the Heavy and Sliding series chosen between a wide number of styles to suit
are developed with two side-bands of chain most various requests.
connected with split cross pieces that can be
Standard Versions:
The new nylon split cross piece can open by an easy to open Aluminium rods screwed at the links. Maximum strength in
hinge, offering a security. every application. Possibilities in customising it’s width. A sepa-
ration of cables system.
Nylon split cross pieces with holes. Many possibilities of Nylon split cross pieces which open by a zip, to facilitate the
choice between the standard models or special version on operations of positioning the cables internally in the chain.
request.
Special Versions:
Split cross pieces made on request. The ideal solution in the Larger split cross pieces. For the transportation of hoses of
case of numerous cables with limited amount of space. notable dimensions.
Multiple side-band chains. If it was necessary to increase the

self-supporting capacity and the stability when having a large
number of cables.
33
Materials Used
The Brevetti Stendalto cable chains in nylon Working Temperature

are developed with a special polyamide Brevetti Stendalto cable chains made of polymers
reinforced with glass fibre, BRYLON 6. can be used in application with a temperature
The high resistance to tension, the low range between -25° +125°. In case of application
coefficient of friction together with the general with “continuous” temperature lower than -15° and
characteristics of the most evolved compound higher than +95°, the mechanical values could be
thermoplastics, allow the cable chains to be reduced. In both the cases Brevetti Stendalto is
used in all environments and temperatures. able to offer solutions using special compounds;
The main characteristics of BRYLON 6 are: please consult us. On request it is possible
to create and develop cable chains using special
Self-Extinguishing
2 Brylon 6 has the certificate UL94HB. On request
the use of the polyamide V0 or V2 can be used.
polyamides to be used in the following applications:
Ex-Proof
The resistance at eventual sparks is good. Cable chains complying with ATEX
Directive 94/9/CE. Nylon cable chains,
UV Rays to be used in explosion high-risk
Brylon 6 is resistant to UV rays and it’s environments, can be supplied made of the special
therefore suitable for external applications. material BRYLON AD. For further information
Chemical Resistance please refer to Brevetti Stendalto’s Technical Office.
Brylon 6 is generally resistant to oils, grease, petrol, Clean room-proof
ammonia and water (sea water). Problems could To be used in clean rooms.
arise with the presence of acids. (See the detailed The standard version of the TESTED
D E V I CE
table showing resistance to various cable chain SR305A009 Brevetti Nylon Chain
Report No. BS 0005-172
chemical agents). has been tested and

proved to be Class 1. For further information you
may require the proper documentation to our
technical department.
The Colouring.
The standard colouring of the Brevetti Stendalto being a body in movement. The high production
cable chains is to have the links in black and the flexibility of Brevetti Stendalto, permits the
pins in yellow. creation of nylon cable chains in various colour
This combination, apart from being eye-catching combinations which can be adjusted to the
represents a further security measure, the chain colours of the equipment.
Colour options.
Links
standard colour: black
colours by request: yellow,
red, blue, green, grey.
Pins
standard colour: yellow
colours by request: black,
red, blue, green.
SR700 yellow nylon chain

with the pins in black.
34
BRYLON 6 Technical Data
Norms Properties Units Typical values Dry
Dry Conditioned H2O < 0,15%
Thermal properties
DSC Melting point (10°C/min.) °C 222 Conditioned
ASTM - D 696 Coefficient of linear thermal expansion X10-6 K-1 28 equilibrium moisture content
ASTM D 648 Heat distorsion temperatur at 23° - 50% R.H.
ISO 75 1.82 N/mm2 °C 210
DIN 53461 0.45 N/mm2 °C 220
U. L. 94 Flammability H.B.
IEC 695-2-1 Incandescent wire
Temperature °C 650
Thickness mm 3
Flammability
ASTM-D 257 Volume resistivity Ohm cm 1015 1011
ASTM-D 257 Surface resistivity Ohm 1013 1011
ASTM-D 149 Dielectric strength KV/mm 22
ASTM-D 150 Dielectric constant (10 Hz) — 3.8 4.5
ASTM-D 150 Dissipation factor (10Hz)) — 0.02 0.09
Physical properties
ASTM-D 792 Density g/cm3 1.38
ASTM-D 570 Water absorption at 23°C in water for 24 hours % 0.90
Mechanical properties
ASTM-D 638
ISO R/527
DIN 53455
ASTM-D 638
Tensile yeld stress
Ultimate elongation
N/mm2
%
195
2.6
115
4 2
ISO R/527 Tensile modulus of elasticity N/mm2 10600 6900
DIN 53457
ASTM-D 790
ISO 178 Flexural strength N/mm2 310 190
DIN 53452
ASTM-D 790 Flexural nodulus N/mm2 10500 6800
ISO 178
ASTM-D 256 Unnotched Izod impact strength J/m 140 300
ISO 180/4C Notched impact strength KJ/m2 110 125
ASTM-D 785 Rockwell hardness Scala R 122 114
Chemical Resistance
BRYLON 6 STEEL The table shows the
resistance to chemical
Chemical agents Concentration % Amorphous Crystal Concentration % agents of BRYLON 6 and
Methyl acetate 100 RB3 RB2 100 RB
Acetone 100 RB4 RB 100 RB Steel.
Acetic acid (aqueous solution) 40 AF AF 40 AF
Acetic acid (aqueous solution) 10 AF AF 10 AF RB
Acetic acid AF AF AF Very good resistance.
Citric acid 10 AD 15 RD 10 AD
Hydrochloric acid (aqueous solution) 36 S S 36 S RD
Hydrochloric acid (aqueous solution) 10 AF AF 10 S Good resistance.
Hydrochloric acid (aqueous solution) 2 AF AD 2 S
Chromic acid (aqueous solution) 10 AF AF 10 AF AD
Chromic acid (aqueous solution) 1 RD RD 1 AF Limited resistance.
Hydrofluoric acid 40 AF AF 40 S
Formic acid (aqueous solution) 85 S S 85 S AD AF
Formic acid (aqueous solution) 40 S AF AF 40 S AD Poor resistance.
Phosphoric acid (aqueous solution) 10 AF AF 10 S
Oleic acid 100 RB3 RB3 100 RD S
Sulphuric acid 98 S S 98 S Soluble.
Sulphuric acid (aqueous solution) 40 AF AF 40 S
Sulphuric acid (aqueous solution) 10 AF AF 10 S Amorphous
Sulphuric acid (aqueous solution) 2 AF AD 2 S Polymer in amorph state.
Tartaric acid (aqueous solution) RD RB RD
Water RB10 RB9 RD Crystal
Chlorine water RD RD AD
Ethyl alcohol 96 RD17 RB3 96 RB
Polymer in crystalline state.
Ammonia 10 RB11 RB 10 AF
Petrol 100 RB1 RB 100 RB The number by resistance
Bitumen RD RD RB value side shows which is
Potassium carbonate 100 RB RB 100 AF
Sodium carbonate 10 RB10 RB3 10 AF the % weight increase due
Ammonium chloride (aqueous solution) 10 RB RB 10 AF to swelling.
Calcium chloride (aqueous solution) 20 S S 20 AF
Calcium chloride (aqueous solution) 10 RB RB 10 AF All data contained in this
Sodium chloride 10 RB RB 10 AF
Formaldehyde (aqueous solution) 30 RD RB 30 AD publication are laboratory
Fat RB RB RB and design values, to be
Milk RB RB RB verified in practical
Mercury RB RB RB
Oils RB RB RB
applications.
Oil RB RB RB
Paraffin oil RB RB RB
Silicon oil RB RB RB
Diesel oil RB RB RB
Mineral oil RB RB RB
Ozone AF AF AF
Oil RB RB RB
Potassium hydroxide (aqueous solution) 10 RB9 RB3 10 S
Sodium hydroxide (aqueous solution) 50 RD RD 50 S
Sodium hydroxide (aqueous solution) 10 RB5 RB 10 S
Sodium hydroxide (aqueous solution) 5 RB9 RB 5 S
Aluminium sulphate 10 RB RB 10 AF
Soap (aqueous solution) RB RB RB
Tincture of iodine AF AF AD
Trichlorethylene RD5 RD4 RB
Vaseline RB RB RB
35
Nylon Cable Chain
Light Series page 38

Medium Series page 56
Heavy Series page 84
Protection Series page 110
Sliding Series page 134
Robot Series page 164
37
Nylon Cable Chains
Light Series
Series SR200 page 40

Series SR30090-SR30091-SR30092 page 44
Series SR325LI/LE page 46
Series SR325L page 48
Channel guide for long travel distance
For series SR30090-SR30091-SR30092-SR300 page 52
For series SR325LI-SR325LE-SR325L-SR339 page 54
Inner surface of chain

completely smooth
Steel or nylon end brackets with

tiewrap clamp
Cross pieces open and close with a Nylon separator. Cables can be laid
“Snap-Fit” action apart from each other
A large surface allows the chain

to slide on itself
39
SR200
Nylon Cable Chain
Inner height (D) 12 mm

Single link construction with central
A
anti-friction pivot. Not openable.
Very smooth chain, particularly suitable C
for small automatic machines like
printers, measurements equipment etc.
D B
Technical characteristics A B C D R Weight/m Chain

when self-supported mm mm mm mm mm kg Part Number
18 15 12 12 018-030-040 0,13 SR20012 *
Speed 10 m/s 31 15 25 12 018-030-040 0,14 SR20025 *
3 Acceleration 50 m/s2
For higher requirements please consult our
41 15 35 12 018-030-040 0,15
*Complete the code by inserting the value of the radius (R): Ex. SR20012 0 1 8
SR20035 *
technical dept.
LS R H N M
LS N mm mm mm mm
2
R 018 51 45 95
030 75 55 130
17 M H
040 95 70 165
Length of chain (L)

Half travel distance ( LS )
2
plus length of curve (M)
L= LS + M
2
40
®
Self-Supporting End Brackets

Capacity Diagram The end brackets set allows the
The maximum length of the
self-supporting capacity ( LS
2
)
two ends of the chain to be
attached to the equipment.
SR200
Nylon Cable Chain
in relationship to the weight
of the cables and hoses
contained per linear metre.
1
0,9
0,8
0,7
0,6
0,5
0,4
0,35
0,3
3
0,25
0,2
0,15 Fig. A
Chain fixed outside the radius. (Fig A)
0,1
0 0,5 1 1,5 2

2
LS
L 30.5 L 30.5
LS
2
3
8 5 7.5
R2 R2
The red marking in the
.5
.5
Ø3
Ø3
diagram area considers the

difference of weight between 28
various widths of chain. F1 F
7.5
For applications with LS2

7.5
and weights not included in
the area of the diagram
Chain F1 F
showing self-supporting
Type mm mm
capacity, verify the possible
SR20025... 13 41
use of support rollers (see
SR20035... 23 51
page 30).
Nylon Type
Part Numbers
Complete Set Assembled
Chain End Brackets
Type Set
SR20012... AN20012KM
SR20025... AN20025KM
SR20035... AN20035KM
Complete Set Unassembled
Chain End Brackets
Type Set
SR20012 AN20012K For further information please
SR20025... AN20025K consult Brevetti Stendalto’s
SR20035... AN20035K Technical Office
41
SR250
Nylon Cable Chain

Single link construction. Not openable
A
Very smooth chain, particularly suitable
for small automatic machines like C
printers, measurements equipment etc.
D B

23 22 15 18 40 0,25 SR25040
Speed 10 m/s
LS
technical dept. R H N M
LS
2 N mm mm mm mm
R 40 102 80 185
30 M H
Length of chain (L)

2
L= LS + M
2
42
®

2
)
SR250
Nylon Cable Chain
1
0,9
0,8
0,7
0,6
0,5
0,4
0,35
0,3
3
0,25
0,2
0,15
Fig. A
0,1 Chain fixed outside the radius. (Fig A)
0 0,5 1 1,5 2 See end brackets mounting
LS Max unsupported length variations page 31.
2
LS
LS L 49
2

14 8,25
difference of weight between
various widths of chain. 11
6,5

and weights not included in Nylon Type
the area of the diagram Part Numbers
capacity, verify the possible Chain End Brackets
use of support rollers (see Type Set
page 30). SR250 AN250KM **
Chain End Brackets
Type Set
SR250 AN250K
** 1=Pos.1; 2=Pos.2; 3=Pos.3
See end brackets mounting variations
page 31.
For further information please

consult Brevetti Stendalto’s
Technical Office
43
SR30090/91/92
Nylon Cable Chain
Inner height (D) 18,5 mm

Single link construction with central A A
large anti-friction pivot, for high torsion C
C
and tensile resistance. Not openable.
Used with guide channels, this chain is
particularly suitable for long distance
D B 2 D B
travel, as typical for example in larger
textile plants.
9 14
SR30090-SR30091-SR30092 SR30091S

29 23,5 18 18,5 033-038-048-070-100 0,32 SR30090 *
Speed 10 m/s 36 23,5 25 18,5 033-038-048-070-100 0,36 SR30091 *
36
49
23,5
23,5
25
38
18,5
18,5
033-038-048-070-100
033-038-048-070-100
0,36
0,39
SR30091
SR30092
S*
*
technical dept. *Complete the code by inserting the value of the radius (R): Ex. SR30090 0 3 8
For sliding applications, technical data can

slightly change according to frequency, added LS R H N M N1 M1
weight and environment. LS mm mm mm mm mm mm
2 N
R 033 89,5 75 165 130 275
30 M H 038 99,5 80 180 130 275
048 119,5 90 210 300 630
070 163,5 112 280 480 1025
100 223,5 145 375 655 1415
LS
LS
2 M1 R
MOVING POINT
H
100
FIXED POINT N1
Length of chain (L)

2
plus length of curve (M) or (M1)
L= LS + M or M1
2
44
®
Self-Supporting Bright Zinc Plated Steel

Capacity Diagram End Brackets*
2
)
The end brackets set allows the
two ends of the chain to SR30090
be attached to the equipment.
SR30091
SR30092
Nylon Cable Chain
6
5
4
3
2
1,5
1
0,8
0,6
0,4
0,3
0,2
3
0,1 Fig. A
0 0,5 1 1,5 2 Chain fixed outside the radius. (Fig A)
LS Max unsupported length See end brackets mounting
2 variations page 31.
LS
LS L 30
2
50
diagram area considers the 15 8
various widths of chain.
12
6.5
the area of the diagram Bright Zinc Plated Steel
showing self-supporting Type Part Numbers
use of support rollers (see Chain End Brackets
page 30). Type Set
SR30090 A30090KM **
SR30091 A30091KM **
SR30091S A30091KM **
SR30092 A30092KM **
Chain End Brackets
Type Set Suitable to long travel distance.
To choose the guide channel
SR30090 A30090K ** see page 52
SR30091 A30091K **
SR30091S A30091K **
SR30092 A30092K **
*Available on request in stainless steel
** 1=Pos.1; 2=Pos.2; 3=Pos.3
page 31. For further information please
Technical Office
45
SR325LI/SR325LE
Nylon Cable Chain
with openable frames
large anti-friction pivot, for high torsion
and tensile resistance.
Frames openable from inner radius
(SR325LI) or from outer radius 2,5 D B
(SR325LE) . Vertical separators
Separator
available. Used with guide channels, C - Unassembled Part.no S325L
this chain is particularly suitable for long A - Assembled Part.no S325LMC
distance travel.

57 38 40 25 050-060-075-100-125-150 0,90 SR325LI(LE)040 *
Speed 10 m/s 77 38 60 25 050-060-075-100-125-150 0,95 SR325LI(LE)060 *
93
120
38
38
76
103
25
25
050-060-075-100-125-150 1,05
050-060-075-100-125-150 1,15
SR325LI(LE)076
SR325LI(LE)103
*
*
technical dept. *Complete the code by inserting the value of the radius (R): Ex. SR325LI040 0 5 0

slightly change according to frequency, added
weight and environment. LS N R H N M N1 M1
LS mm mm mm mm mm mm
2
R
050 138 115 250 145 300

060 158 125 280 155 335
45
M H 075 188 140 325 185 420
100 238 165 405 275 635
125 288 190 485 360 855
150 338 215 565 445 1075
LS
LS
2 M1 R
MOVING POINT
H
140
FIXED POINT N1
Length of chain (L)

2
L= LS + M o M1
2
46
®

Capacity Diagram The end brackets set allows the two ends of the chain to be
2
)
attached to the equipment. EBs tiewrap clamps and/or
centre-distance reducers fully available under request.
SR325LI
Nylon Type Bright Zinc Plated Steel
Type*
SR325LE
Nylon Cable Chain
contained per linear metre. with openable frames
10
9
8
7
6
5
4,5
4
3,5
3
2,5
1,5
1
Separation System
To choose the separators see
page. 176
3
0,5
0 0,5 1 1,5 2 2,5 Fig. A Fig. B
LS Max unsupported length Chain fixed outside/inside the Chain fixed outside the radius. (Fig B) Nylon end brackets
2 radius. (Fig A) See end brackets mounting centre-distance
variations page 31. reducers
LS 60,5 L 66,5
Ø8,5 50 L 50 Reducers mounted on the inner radius
LS 14
2 7
24 38
7 Ø5,2 Reducers 8 24 8
14
The red marking in the 6,1 40 6,5

F3 F F2 F1
diagram area considers the 10,1
Chain F F3 Chain F2 F1
Reducers mounted on the outer radius
type mm mm Type mm mm
SR325L...040 51 22 SR325L...040 20 23,5
SR325L...060 71 42 SR325L...060 40 43,5
and weights not included in SR325L...076 87 58 SR325L...076 56 59,5
the area of the diagram SR325L...103 114 85 SR325L...103 83 86,5
capacity, verify the possible Nylon Type Bright Zinc Plated Steel
use of support rollers (see Part Numbers Type Part Numbers
page 30). Complete Set Assembled Complete Set Assembled
Chain End Brackets Chain End Brackets
Type Set Type Set
SR325L... AN325L *KM SR325L... A325LK**
Complete Set Unassembled *Available on request in stainless steel
**See end brackets mounting
Chain End Brackets
variations page 31.
Type Set
SR325L... AN325L *K Suitable to long travel distance.
Tiewrap Clamp see page 54
Part Number
Assembled
CFC325L *KM
Unassembled
CFC325L *K
Centre-distance Reducers Set For further information please
Part Number consult Brevetti Stendalto’s
Technical Office
Unassembled AQF325K
* Complete the code by inserting the 47
value of the quote C.
SR325L
Nylon Cable Chain

Vertical separators available.
Used with guide channels, this chain is 2,5 D B
particularly suitable for long distance
Separator
travel.
C - Unassembled Part.no S325L
A - Assembled Part.no S325LMC

57 38 40 25 050-060-075-100-125-150 0,90 SR325L040 *
Speed 10 m/s 77 38 60 25 050-060-075-100-125-150 0,95 SR325L060 *
93
120
38
38
76
103
25
25
050-060-075-100-125-150 1,05
050-060-075-100-125-150 1,15
SR325L076
SR325L103
*
*
technical dept. *Complete the code by inserting the value of the radius (R): Ex. SR325L040 0 5 0

2
R
050 138 115 250 145 300

45
060 158 125 280 155 335
M H 075 188 140 325 185 420
100 238 165 405 275 635
125 288 190 485 360 855
150 338 215 565 445 1075
LS
LS
2 M1 R
MOVING POINT
H
140
FIXED POINT N1
Length of chain (L)

2
L= LS + M o M1
2
48
®

2
)
attached to the equipment. EBs tiewrap clamps and/or
centre-distance reducers fully available under request.
SR325L
Nylon Cable Chain
in relationship to the weight Nylon Type Bright Zinc Plated Steel
of the cables and hoses Type*
10
9
8
7
6
5
4,5
4
3,5
3
2,5
1,5
1
Separation System
page. 176
3
0,5
0 0,5 1 1,5 2 2,5 Fig. A Fig. B
LS Max unsupported length Chain fixed outside/inside the Chain fixed outside the radius. (Fig B) Nylon end brackets
2 radius. (Fig A) See end brackets mounting centre-distance
variations page 31. reducers
LS 60,5 L 66,5
Ø8,5 50 L 50 Reducers mounted on the inner radius
LS 14
2 7
24 38
7 Ø5,2 Reducers 8 24 8
14
The red marking in the 6,1 40 6,5

F3 F F2 F1
diagram area considers the 10,1
Chain F F3 Chain F2 F1
Reducers mounted on the outer radius
type mm mm Type mm mm
SR325L...040 51 22 SR325L...040 20 23,5
SR325L...060 71 42 SR325L...060 40 43,5
and weights not included in SR325L...076 87 58 SR325L...076 56 59,5
the area of the diagram SR325L...103 114 85 SR325L...103 83 86,5
capacity, verify the possible Nylon Type Bright Zinc Plated Steel
use of support rollers (see Part Numbers Type Part Numbers
page 30). Complete Set Assembled Complete Set Assembled
Type Set Type Set
SR325L... AN325L *KM SR325L... A325LK**
Chain End Brackets
variations page 31.
Type Set
SR325L... AN325L *K Suitable to long travel distance.
Tiewrap Clamp see page 54
Part Number
Assembled
CFC325L *KM
Unassembled
CFC325L *K
Centre-distance Reducers Set For further information please
Part Number consult Brevetti Stendalto’s
Technical Office
Unassembled AQF325K
* Complete the code by inserting the 49
SR339
Nylon Cable Chain

Single link construction with central large
anti-friction pivot, for high torsion and
tensile resistance. Not openable version. A
Short pitch and very small bending radius C
design makes these chains suitable for
applications width the smallest available
3 Separator
spaces. These series can be easily used D B
- Unassembled Part.no S339
for long distance travels width the
- Assembled Part.no S339MC
corresponding guide channels.

60 50 40 39 050-075-100 1,48 SR339040 *
Speed 10 m/s 80 50 60 39 050-075-100 1,48 SR339060 *
96 50 76 39 050-075-100 1,65 SR339076
*
technical dept.

2
R 050 150 115 230 140 275
075 200 135 305 215 470
35
M H 100 250 160 385 310 705
LS
LS
2 M1 R
MOVING POINT
H
140
FIXED POINT N1
Length of chain (L)

2
L= LS + M or M1
2
50
®

2
)
Nylon Cable Chain
in relationship to the weight be attached to the equipment.
15
13
10
9
8
7
6
5
4
3
3
2,5 Fig. A
2
1,5
See end brackets mounting
1
variations page 31
0 0,5 1 1,5 2 2,5 3
55 L 55
2
LS
8,5 24 8,5
LS 14
2
41 6,5 F

diagram area considers the Chain F
difference of weight between Type mm
various widths of chain. SR339040 21
SR339060 41
SR339076 57
and weights not included in Bright Zinc Plated Steel
the area of the diagram Type Part Numbers
showing self-supporting Complete Set Unassembled
capacity, verify the possible Chain End Brackets
use of support rollers (see Type Set
page 30). SR339... A339K
page 31.
Suitable to long travel distance.

see page 54

Technical Office
51
Guide Channel
SR30090-SR30091-SR30092-SR300
Special channel guide allows the use of
the chain for long travel distance.
Available in galvanised steel and, on
request, in stainless steel.
Single Chain Application

LS
LS LS
2 2
R
A B
A B
3 GUIDE EMPTY SECTION GUIDE WITH SLIDING PLATE SECTION
Double Chain Application
LS
LS LS
2 2
R
A A
A A
GUIDE EMPTY CHANNEL
Channel guide is available in kit form

composed of:
side walls 2 m standard length
joining plates
fixing screws
2000
SIDE WALL
JOINING PLATE
52
®
Guide Empty Section

Section A-A
Part Number
CS30090…
How to order
A1+30
Chain part number SR30090038
A1=A+4
Guide channel
part number CS30090
70
1,5
CS30091…
How to order
3
SEAT FOR SCREW

M6 UNI 5933 Chain part number SR30091038
Guide channel
part number CS30091
Guide Sliding Plate Section

Section B-B 3
Part Number
CA30090…
A1+30 How to order
A1=A+4 Chain part number SR30090038
Guide channel
23,5
part number CA30090

70
1,5
CA30091…
3
SEAT FOR SCREW How to order

M6 UNI 5933
Guide channel
part number CA30091

Technical Office
53
Guide Channel
SR325LI-SR325LE-SR325L-SR325PI-SR339
Special channel guide allows the use of

LS
LS LS
2 2
R
A B
A B
LS
LS LS
2 2
R
A A
A A
GUIDE EMPTY SECTION
Channel guide is available in kit form

composed of:
joining plates
fixing screws
2000
FIXING PLATE
SIDE WALL
JOINING AND
SUPPORT PLATE
BASE
54
®
Guide Empty Section

Section A-A
Part Number
CS325L-LI-LE
How to order
Chain part number SR325L040050
A1=A+4 Chain part number SR325LI040050
Chain part number SR325LE040050
96.5
Guide channel
20
A2=A+87 part number CS325L040
Guide Sliding Plate Section SR325...

Section B-B 3
Part Number
CA325L-LI-LE
How to order
Chain part number SR325L040050
A1=A+4 Chain part number SR325LI040050
Chain part number SR325LE040050
37
96.5
Guide channel
20
A2=A+87 part number CA325040
Guide Sliding Plate Section SR339

Section B-B
Part Number
CA339…
How to order
Guide channel
40
96.5
20
A2=A+87

Technical Office
55
Nylon Cable Chains
Medium Series
Series SR300A page 58

Series SR435MI-SR435ME page 72

For chains SR305-SR355-SR435MI-SR435ME page 82
For chains SR445MI-SR445ME-SR660A-SR770A page 160
For chains SR475MI-SR475ME page 162
Horizontal Separation page 176
Tiewrap clamp for an

optimal conduct fixing
Steel or nylon end brackets

Cross pieces open and close with a Nylon separator. Cables can be laid
“Snap-Fit” action apart from each other
Single connecting Pivot Pin

which offers high integrity in
high performance applications

completely smooth
57
SR300A
Nylon Cable Chain
A
Single link construction with
C
anti-friction single-pin.
Frames openable from inner radius.
Vertical separators available. 1,5 D B Separator
The wide frames on out radius offer - Unassembled Part.no S300A
good protection, when operating - Assembled Part.no S300AMC
horizontally. Pin
Part.no PG300A

27 23 15 18 040-060-080-120 0,41 SR300A015 *
Speed 10 m/s 37 23 25 18 040-060-080-120 0,45 SR300A025 *
62
87
23
23
50
75
18
18
040-060-080-120
040-060-080-120
0,55 SR300A050
0,65 SR300A075
*
*
technical dept. *Complete the code by inserting the value of the radius (R): Ex. SR300A015 0 4 0
LS N R H N M
LS mm mm mm mm
2 040 103 85 185
R
060 143 105 250
30 080 183 125 315
M H
120 263 165 440
Length of chain (L)

2
L= LS + M
2
58
®

2
)
SR300A
Nylon Cable Chain
in relationship to the weight Type** with openable frames
6
5
4
3
2
1,5
1
0,8
0,6
0,4
0,3
0,2
Fig. A
Fig. B
Chain fixed outside the radius. (Fig B)
3
0,1 variations page 31.
0 0,5 1 1,5 2
LS Max unsupported length L 32 L 31,5

2
LS 50
LS 12 6 12 8
2
8,5
12
SR300A015... 5,5 SR300A015... 5,5

SR300A025... SR300A025...
The red marking in the 13 15
various widths of chain. F F
8,5
12
SR300A050... SR300A050...
SR300A075...
5,5 SR300A075... 5,5
LS
For applications with 2 Chain F Chain F
and weights not included in Type mm Type mm
the area of the diagram SR300A050 25 SR300A050 25
showing self-supporting SR300A075 50 SR300A075 50
use of support rollers (see Nylon Type Bright Zinc Plated Steel
page 30). Part Numbers Type Part Numbers
Complete Set Assembled Complete Set Assembled How to open the cover.
Type Set Type Set
SR300A... AN300A *KM SR300A... A300A *KM
Complete Set Unassembled Complete Set Unassembled
Chain End Brackets Chain End Brackets Special tool to remove the
connecting pivots:
Type Set Type Set Part Number PZ010.
SR300A... AN300A *K SR300A... A300A *K
Tiewrap Clamp **Available on request in stainless
steel
Part Number
Assembl. CFC300 *KM
Unassembl. CFC300 *K
* Complete the code by inserting the For further information please
value of the quote C. consult Brevetti Stendalto’s
Technical Office
59
SR300
Nylon Cable Chain

Single link construction with
anti-friction single-pin. Not openable.
The chain is an extremely strong A
18 mm chain, particularly suitable for C
high frequency/acceleration
operations, like on laser cutting heads,
in which the chain is highly stressed, D B
Pin
due to high acceleration in all 3
Part.no PG300
directions.

30 23 14 18 040-060-080-120 0,38 SR300015 *
Speed 10 m/s 41 23 25 18 040-060-080-120 0,43 SR300025 *
52 23 36 18 040-060-080-120 0,48 SR300035
*
technical dept.
For sliding applications, technical data can LS R H N M N1 M1

slightly change according to frequency, added LS N mm mm mm mm mm mm
weight and environment. 2
R 40 103 85 185 185 385
30 60 143 105 248 410 865
M H 80 183 125 315 545 1165
120 263 165 440 750 1640
LS
LS
2 M1 R
MOVING POINT
H
100
FIXED POINT N1
Length of chain (L)

2
L= LS + M or M1
2
60
®

2
)
Nylon Cable Chain
in relationship to the weight be attached to the equipment.
6
5
4
3
2
1,5
1
0,8
0,6
0,4
0,3
0,2
3
0,1 Fig. A
0 0,5 1 1,5 2 Chain fixed outside the radius. (Fig A)
LS
LS
2 L 30
50
various widths of chain. 12
6,5

and weights not included in Bright Zinc Plated Steel
the area of the diagram Type Part Numbers
capacity, verify the possible Complete Set Assembled
Chain End Brackets
Type Set
page 30).
SR300015... AP300KM **
SR300025... AG300KM ** Suitable to long travel distance.
SR300035... A300035KM ** To choose the guide channel
see page 52
Chain End Brackets
Type Set
SR300015... AP300K ** Special tool to remove the
SR300025... AG300K ** connecting pivots:
Part Number PZ010.
SR300035... A300035K **
** 1=Pos.1; 2=Pos.2; 3=Pos.3
page 31.

Technical Office
61
SR305A
Nylon Cable Chain
with removable frames
Double share single link joining
construction with large anti-friction A
C
single-pin. Frames removable from
inner radius. Vertical separators are Separator
available. Wide frames on outer radius 2,5 D B - Unassembled Part.no S305
offer good protection. Due to its design - Assembled Part.no S305MC
with double-share lateral side, the Pin
chain is very robust, meanwhile
Part.no PG305
offering very low friction.

54 30 30 24 50 0,85 SR305A008
Speed 10 m/s 54 30 30 24 70 0,85 SR305A010
54
54
30
30
30
30
24
24
120
150
0,85
0,85
SR305A020
SR305A050
technical dept. 74 30 50 24 50 0,95 SR305A009
74 30 50 24 70 0,95 SR305A030
74 30 50 24 120 0,95 SR305A040
74 30 50 24 150 0,95 SR305A060
LS N R H N M
LS mm mm mm mm
2 R 50 130 105 230
35
70 170 120 290
M H
120 270 175 450
150 330 205 545
Length of chain (L)

2
L= LS + M
2
62
®

2
)
SR305A
Nylon Cable Chain
in relationship to the weight Type* with removable frames
10
9
8
7
6
5
4,5
4
3,5
3
3
2,5
2
1,5
Fig. A Fig. B
The chain can be fixed frontally, Chain fixed outside the radius. (Fig B)
1
0 0,5 1 1,5 2 2,5
inner or outer radius. (Fig A) See end brackets mounting
variations page 31.
2
LS
LS
2 30 L 30 ø5,5 L 42,5
ø9 6
30
ø5,5 65
The red marking in the 6,5
12
difference of weight between F F
15
Chain F Chain F
For applications with LS2 Type mm Type mm
SR305A C=30 42,5 SR305A C=30 30,5
the area of the diagram SR305A C=50 62,5 SR305A C=50 50,5
page 30). Nylon Type Bright Zinc Plated Steel
Part Numbers Type Part Numbers
How to open the cover.
Complete Set Assembled Complete Set Assembled
Type Set Type Set
SR305A C=30 AN305KM SR305A C=30 AP305AKM1
SR305A C=50 AN305KM SR305A C=50 AG305AKM1
Special tool to remove the
Complete Set Unassembled Complete Set Unassembled connecting pivots:
Chain End Brackets Chain End Brackets Part Number PZ010.
Type Set Type Set
SR305A C=30 AN305K SR305A C=30 AP305AK1
SR305A C=50 AN305K SR305A C=50 AG305AK1

Technical Office
63
SR305
Nylon Cable Chain

construction with large anti-friction
single-pin. Not openable. Vertical
A
separators are available. Due to its Separator*
C
design with double-share lateral side, - Unassembled Part.no S305
the chain is very robust, meanwhile - Assembled Part.no S305MC
offering very low friction. Used with D B Pin
2,5
guide channels, this chain is particularly
Part.no PG305
suitable for long distance travel.

54 30 30 23 50 0,90 SR305008
Speed 10 m/s 54 30 30 23 70 0,90 SR305010
54
54
30
30
30
30
23
23
120
150
0,90
0,90
SR305020
SR305050
technical dept. 74 30 50 23 50 1,00 SR305009
74 30 50 23 70 1,00 SR305030
74 30 50 23 120 1,00 SR305040
slightly change according to frequency, added 74 30 50 23 150 1,00 SR305060
weight and environment.
*Separator not to be used in long-stroke

applications LS R H N M N1 M1
2 N
R 50 130 105 230 125 270
70 170 120 290 160 365
35 M H 120 270 175 450 330 800
150 330 205 545 435 1065
LS
LS
2 M1 R
MOVING POINT
H
130
FIXED POINT N1
Length of chain (L)

2
L= LS + M or M1
2
64
®

2
)
SR305
Nylon Cable Chain
in relationship to the weight Type*
10
9
8
7
6
5
4,5
4
3,5
3
3
2,5
2
1,5
Fig. A Fig. B
The chain can be fixed frontally, Chain fixed outside the radius. (Fig B)
1
0 0,5 1 1,5 2 2,5
variations page 31.
2
LS
LS 30 L 30 ø5,5 L 42,5
2
ø9
30
ø5,5 6 65
The red marking in the 6,5
12
15
Chain F Chain F
SR305 C=30 40,5 SR305 C=30 30,5
the area of the diagram SR305 C=50 60,5 SR305 C=50 51,5
Complete Set Assembled Complete Set Assembled Suitable to long travel distance.
Chain End Brackets Chain End Brackets To choose the guide channel
see page 82
Type Set Type Set
SR305 C=30 AN305KM SR305 C=30 AP305KM **
SR305 C=50 AN305KM SR305 C=50 AG305KM **
Type Set Type Set
SR305 C=30 AN305K SR305 C=30 AP305K **
SR305 C=50 AN305K SR305 C=50 AG305K **
** 1=Pos.1; 2=Pos.2; 3=Pos.3
page 31. For further information please
Technical Office
65
SR355A
Nylon Cable Chain
Inner height (D) 31 mm A
C
inner radius. Vertical separators are B Separator
available. Wide frames on outer radius 2 D
Part.no PG355

74 43 45 31 75 1,40 SR355A045
Speed 10 m/s 74 43 45 31 100 1,40 SR355A046
74
74
43
43
45
45
31
31
150
200
1,40
1,40
SR355A047
SR355A048
technical dept. 94 43 65 31 75 1,50 SR355A065
94 43 65 31 100 1,50 SR355A066
94 43 65 31 150 1,50 SR355A067
94 43 65 31 200 1,50 SR355A068
124 43 95 31 75 1,70 SR355A095
124 43 95 31 100 1,70 SR355A096
124 43 95 31 150 1,70 SR355A097
124 43 95 31 200 1,70 SR355A098
LS N R H N M
LS mm mm mm mm
2 R 75 193 140 315
100 243 165 395
40 M H
150 343 215 555
200 443 265 710
Length of chain (L)

2
L= LS + M
2
66
®

2
)
SR355A
Nylon Cable Chain
10
9
8
7
6
5,5
5
4,5
4
3,5
3
3
2,5
2
1,5
Fig. A Fig. B
1 The chain can be fixed frontally, Chain fixed outside the radius. (Fig B)
0 0,5 1 1,5 2 2,5 inner or outer radius. (Fig A) See end brackets mounting
2
LS
LS 55 L 40
L ø5.5
2 18 10
14.5
16
14.5
ø9 ø5.5 65
The red marking in the 6,5 12
15
Chain F Chain F
SR355A C=45 59 SR355A C=45 50
the area of the diagram SR355A C=65 79 SR355A C=65 70
showing self-supporting SR355A C=95 109 SR355A C=95 100
Type Set Type Set
SR355A C=45 AN355KM SR355A C=45 AP355AKM1
SR355A C=65 AN355KM SR355A C=65 AM355AKM1
SR355A C=95 AN355KM SR355A C=95 AG355AKM1 connecting pivots:
Complete Set Unassembled Complete Set Unassembled Part Number PZ010.
Type Set Type Set
SR355A C=45 AN355K SR355A C=45 AP355AK1
SR355A C=65 AN355K SR355A C=65 AM355AK1
SR355A C=95 AN355K SR355A C=95 AG355AK1
Technical Office
67
SR355
Nylon Cable Chain

single-pin. Not openable. Vertical A
separators are available. Due to its C
Separator*
design with double-share lateral side, - Unassembled Part.no S355
the chain is very robust, meanwhile - Assembled Part.no S355MC
offering very low friction. Used with D
B
Pin
2
guide channels, this chain is particularly
Part.no PG355
suitable for long distance travel.

74 45 45 30 75 1,35 SR355045
Speed 10 m/s 74 45 45 30 100 1,35 SR355046
74
74
45
45
45
45
30
30
150
200
1,35
1,35
SR355047
SR355048
94 45 65 30 100 1,45 SR355066
94 45 65 30 150 1,45 SR355067
slightly change according to frequency, added 94 45 65 30 200 1,45 SR355068
weight and environment. 124 45 95 30 75 1,65 SR355095
124 45 95 30 100 1,65 SR355096
*Separator not to be used in long-stroke 124 45 95 30 150 1,65 SR355097
applications
124 45 95 30 200 1,65 SR355098
LS N R H N M N1 M1
LS
2 mm mm mm mm mm mm
R 75 195 140 315 190 420
100 245 165 395 275 640
40 M H
150 345 215 555 450 1075
200 445 265 710 620 1515
LS
LS
2 M1 R
MOVING POINT
H
140
FIXED POINT N1
Length of chain (L)

2
L= LS + M or M1
2
68
®

2
)
SR355
Nylon Cable Chain
in relationship to the weight Type*
10
9
8
7
6
5,5
5
4,5
4
3,5
3
3
2,5
2
1,5
Fig. A Fig. B
0 0,5 1 1,5 2 2,5 inner or outer radius. (Fig A) See end brackets mounting
2
LS
LS 55 L 40
L ø5.5
2 18 10
14.5
16
14.5
ø9 ø5.5 65
The red marking in the 6,5 12

15
Chain F Chain F
SR355 C=45 57 SR355 C=45 50
the area of the diagram SR355 C=65 77 SR355 C=65 70
showing self-supporting SR355 C=95 107 SR355 C=95 100
Complete Set Assembled Complete Set Assembled Suitable to long travel distance.
Chain End Brackets Chain End Brackets To choose the guide channel
see page 82
Type Set Type Set
SR355 C=45 AN355KM SR355 C=45 AP355KM **
SR355 C=65 AN355KM SR355 C=65 AM355KM **
SR355 C=95 AN355KM SR355 C=95 AG355KM ** connecting pivots:
Type Set Type Set
SR355 C=45 AN355K SR355 C=45 AP355K **
SR355 C=65 AN355K SR355 C=65 AM355K **
SR355 C=95 AN355K SR355 C=95 AG355K **
** 1=Pos.1; 2=Pos.2; 3=Pos.3
Technical Office
page 31.
69
SR400
Nylon Cable Chain
Double share singlelink joining A
construction with large anti-friction C
inner radius. Vertical separators are Separator
D B
available. Wide frames on outer radius 2,5
Part.no PG305

62 35 40 25 50 1,10 SR400040
Speed 10 m/s 62 35 40 25 75 1,10 SR400041
62
62
35
35
40
40
25
25
100
150
1,10
1,10
SR400042
SR400043
82 35 60 25 75 1,25 SR400061
82 35 60 25 100 1,25 SR400062
82 35 60 25 150 1,25 SR400063
LS N R H N M
LS mm mm mm mm
2
R 50 135 110 240
40 M H
75 185 135 315
100 235 160 395
150 335 210 555
Length of chain (L)

2
L= LS + M
2
70
®

2
)
SR400
Nylon Cable Chain
10
9
8
7
6
5
4,5
4
3,5
3
3
2,5
2
1,5
Fig. A Fig. B
1
Chain fixed outside/inside the Chain fixed outside the radius. (Fig B)
0 0,5 1 1,5 2 2,5 radius. (Fig A) See end brackets mounting
2
LS 50 50
L
LS 8 17 17 8 L 40
2
ø5,5 ø5,5
ø5,5 ø5,5 6,5
12

15
Chain F Chain F
SR400 C=40 50 SR400 C=40 30
the area of the diagram SR400 C=60 70 SR400 C=60 50
Type Set Type Set
SR400 C=40 AN400KM SR400 C=40 AP400KM1
SR400 C=60 AN400KM SR400 C=60 AG400KM1
Type Set Type Set
SR400 C=40 AN400K SR400 C=40 AP400K1
SR400 C=60 AN400K SR400 C=60 AG400K1
* Available on request in stainless steel

Technical Office
71
SR435MI/SR435ME
Nylon Cable Chain
Sideband & Frame construction with A
large anti-friction single-pin.
(SR435MI ) or from outer radius Separator
(SR435ME). - Unassembled Part.no S4353
Vertical separators are available. 3 D B
This standard 35 mm chain offers very Pin
high load capacities, despite its
C Part.no PG4353
compact construction.

60 49 40 35 060-075-100-125-150-200 1,10 SR435MI(ME)040 *
Speed 10 m/s 70 49 50 35 060-075-100-125-150-200 1,15 SR435MI(ME)050 *
80
96
49
49
60
76
35
35
060-075-100-125-150-200
060-075-100-125-150-200
1,20 SR435MI(ME)060
1,30 SR435MI(ME)076
*
*
technical dept. 117 49 97 35 060-075-100-125-150-200 1,35 SR435MI(ME)097 *
123 49 103 35 060-075-100-125-150-200 1,45 SR435MI(ME)103 *
145 49 125 35 060-075-100-125-150-200 1,55 SR435MI(ME)125 *
slightly change according to frequency, added 170 49 150 35 060-075-100-125-150-200 1,70 SR435MI(ME)150 *
weight and environment. *Complete the code by inserting the value of the radius (R): Ex. SR435MI(ME)040 0 6 0
R H N M N1 M1
mm mm mm mm mm mm
LS N
060 169 135 290 165 345
LS
2 075 199 155 340 190 420
R 100 249 175 415 230 530
125 299 200 495 320 750
50 M H 150 349 230 575 405 970
200 449 275 730 580 1405
LS
MOVING POINT LS
2 M1 R
H
140
FIXED POINT N1
Length of chain (L)

2
L= LS + M or M1
2
72
®

2
)
attached to the equipment. Set complete with tiewrap clamps
available on request.
SR435MI
Type*
SR435ME
Nylon Cable Chain
15
13
10
9
8
7
6
5
4
3
3
2,5
2
Separation System
1,5
Fig. A Fig. B To choose the separators see
1 The chain can be fixed frontally, Chain fixed outside the radius. (Fig B) page. 176
0 0,5 1 1,5 2 2,5 3 inner or outer radius. (Fig A) See end brackets mounting
2
L 65 L 107,5
17
LS
LS 15
2 17
17 7
ø5.5 8,5 24 8,5
6,5 12
The red marking in the F F
Chain F Chain F
Type mm Type mm
SR435MI(ME)040 51 SR435MI(ME)040 30 How to open the cover.
SR435MI(ME)050 61 SR435MI(ME)050 40
and weights not included in SR435MI(ME)060 71 SR435MI(ME)060 50
the area of the diagram SR435MI(ME)076 87 SR435MI(ME)076 66
showing self-supporting SR435MI(ME)097 108 SR435MI(ME)097 87
capacity, verify the possible SR435MI(ME)103 114 SR435MI(ME)103 93
use of support rollers (see SR435MI(ME)125 136 SR435MI(ME)125 115
page 30). SR435MI(ME)150 161 SR435MI(ME)150 140

Part Numbers Type Part Numbers To choose the guide channel
see page 82
Type Set Type Set
SR435... AN435M *KM SR435... A435M KM ** Special tool to remove the
connecting pivots:
Type Set Type Set
SR435... AN435M *K SR435... A435M K **
Tiewrap Clamp *Available on request in stainless steel
** 1=Pos.1; 2=Pos.2; 3=Pos.3
Part Number See end brackets mounting variations
Assembl. CFC435M *KM page 31. For further information please
Unassembl. CFC435M *K consult Brevetti Stendalto’s
* Complete the code by inserting the Technical Office
73
SR445MI/SR445ME
Nylon Cable Chain
Sideband & Frame construction with
Separator
- Unassembled Part.no S445UF
large anti-friction single-pin. A
- Assembled Part.no S445UFMC
(SR445MI) or from outer radius
Strong-hold separator
for C > 200 mm
(SR445ME) . Vertical and horizontal Part.no S445SH
D B
- Unassembled
modular separator system is available. 4
- Assembled Part.no S445SHMC
This standard 45mm chain offers very Pin
high load capacities, despite its
C Part.no PG445
compact construction.

72 64 50 45 075-100-125-150-175-200-250-300 1,64 SR445MI(ME)050 *
Speed 10 m/s 83 64 61 45 075-100-125-150-175-200-250-300 1,64 SR445MI(ME)061 *
97
103
64
64
75
81
45
45
075-100-125-150-175-200-250-300 1,76 SR445MI(ME)075
075-100-125-150-175-200-250-300 1,79 SR445MI(ME)081
*
*
technical dept. 117 64 95 45 075-100-125-150-175-200-250-300 1,86 SR445MI(ME)095 *
122 64 100 45 075-100-125-150-175-200-250-300 1,87 SR445MI(ME)100 *
129 64 107 45 075-100-125-150-175-200-250-300 1,90 SR445MI(ME)107 *
slightly change according to frequency, added 139 64 117 45 075-100-125-150-175-200-250-300 1,93 SR445MI(ME)117 *
weight and environment. 147 64 125 45 075-100-125-150-175-200-250-300 2,01 SR445MI(ME)125 *
158 64 136 45 075-100-125-150-175-200-250-300 2,07 SR445MI(ME)136 *
172 64 150 45 075-100-125-150-175-200-250-300 2,13 SR445MI(ME)150 *
197 64 175 45 075-100-125-150-175-200-250-300 2,25 SR445MI(ME)175 *
LS N 222 64 200 45 075-100-125-150-175-200-250-300 2,39 SR445MI(ME)200 *
LS 233 64 211 45 075-100-125-150-175-200-250-300 2,44 SR445MI(ME)211 *
2 247 64 225 45 075-100-125-150-175-200-250-300 2,52 SR445MI(ME)225 *
R
274 64 252 45 075-100-125-150-175-200-250-300 2,66 SR445MI(ME)252 *
67 H 283 64 261 45 075-100-125-150-175-200-250-300 2,70 SR445MI(ME)261 *
M
334 64 312 45 075-100-125-150-175-200-250-300 2,92 SR445MI(ME)312 *
356 64 334 45 075-100-125-150-175-200-250-300 3,05 SR445MI(ME)334 *
384 64 362 45 075-100-125-150-175-200-250-300 3,18 SR445MI(ME)362 *
LS
*Complete the code by inserting the value of the radius (R): Ex. SR445MI(ME)050 0 7 5
MOVING POINT LS
2 M1 R
H R H N M N1 M1
200
mm mm mm mm mm mm
FIXED POINT N1 075 214 180 370 205 425
100 264 200 450 230 505
Length of chain (L) 125 314 225 530 285 655
Half travel distance ( LS ) 150 364 250 605 375 875
2 175 414 275 685 460 1085
plus length of curve (M) or (M1) 200 464 300 765 550 1310
250 564 350 920 725 1750
L= LS + M or M1 300 664 400 1080 895 2185
2
74
®

2
)
SR445MI
Type*
SR445ME
Nylon Cable Chain
30
20
15
10
8
6
5
4
3
2
1,5
Fig. A
The chain can be fixed frontally,
inner or outer radius. (Fig A)
Fig. B
Separation System
3
1 variations page 31. page. 176
0 1 2 3 4
L 81 L 137
LS Max unsupported length 19,5
2
25
LS 20 10 19,5
ø6.5 10 35 10
LS
2
6,5 12
F F
The red marking in the Chain F Chain F

diagram area considers the Type mm Type mm
difference of weight between SR445MI(ME)050 63 SR445MI(ME)050 28
SR445MI(ME)061 74 SR445MI(ME)061 39
various widths of chain. SR445MI(ME)075 88 SR445MI(ME)075 53
SR445MI(ME)081 94 SR445MI(ME)081 59
SR445MI(ME)095 108 SR445MI(ME)095 73
SR445MI(ME)100 113 SR445MI(ME)100 78
SR445MI(ME)107 120 SR445MI(ME)107 85 How to open the cover.
SR445MI(ME)117 130 SR445MI(ME)117 95
SR445MI(ME)125 138 SR445MI(ME)125 103
SR445MI(ME)136 149 SR445MI(ME)136 114
and weights not included in SR445MI(ME)150 163 SR445MI(ME)150 128
the area of the diagram SR445MI(ME)175 188 SR445MI(ME)175 153
SR445MI(ME)200 213 SR445MI(ME)200 178
showing self-supporting SR445MI(ME)211 224 SR445MI(ME)211 189
SR445MI(ME)225 238 SR445MI(ME)225 203
capacity, verify the possible SR445MI(ME)252 265 SR445MI(ME)252 230
SR445MI(ME)261 274 SR445MI(ME)261 239
use of support rollers (see SR445MI(ME)312 325 SR445MI(ME)312 290
page 30). SR445MI(ME)334 347 SR445MI(ME)334 312
SR445MI(ME)362 375 SR445MI(ME)362 340
Nylon Type Bright Zinc Plated Steel Suitable to long travel distance.
Part Numbers Type Part Numbers see page 160
Type Set Type Set Special tool to remove the
SR445... AN445M *KM SR445... A445M KM ** connecting pivots:
Part Number PZ010.
Type Set Type Set
SR445... AN445M *K SR445... A445M K **
** 1=Pos.1; 2=Pos.2; 3=Pos.3
Part Number See end brackets mounting variations For further information please
Assembled CFC445 *KM page 31. consult Brevetti Stendalto’s
Unassembled CFC445 *K Technical Office
* Complete the code by inserting the
value of the quote C. 75
SR660A
Nylon Cable Chain
Double share Sideband & Frame
Separator
A - Unassembled Part.no S660A
- Assembled Part.no S660AMC
single-pin. Frames openable from inner
radius. As standard the chain comes
for C > 200 mm
with frames every second link, on 5 D B 3
Part.no S660AH
- Unassembled
request with frames every link. - Assembled Part.no S660AHMC
Vertical and horizontal modular Pin
separator system is available.
S660AH Part.no PG660

75 55 50 37 100-150-200-250 1,51 SR660A050 *
Speed 6 m/s 86 55 61 37 100-150-200-250 1,51 SR660A061 *
100
106
55
55
75
81
37
37
100-150-200-250
100-150-200-250
1,59 SR660A075
1,61 SR660A081
*
*
technical dept. 120 55 95 37 100-150-200-250 1,66 SR660A095 *
125 55 100 37 100-150-200-250 1,66 SR660A100 *
132 55 107 37 100-150-200-250 1,69 SR660A107 *
slightly change according to frequency, added 142 55 117 37 100-150-200-250 1,71 SR660A117 *
weight and environment. 150 55 125 37 100-150-200-250 1,76 SR660A125 *
161 55 136 37 100-150-200-250 1,80 SR660A136 *
175 55 150 37 100-150-200-250 1,84 SR660A150 *
200 55 175 37 100-150-200-250 1,93 SR660A175 *
LS N
225 55 200 37 100-150-200-250 2,02 SR660A200 *
LS 236 55 211 37 100-150-200-250 2,06 SR660A211 *
2 250 55 225 37 100-150-200-250 2,11 SR660A225 *
R
277 55 252 37 100-150-200-250 2,21 SR660A252 *
50 M H 286 55 261 37 100-150-200-250 2,24 SR660A261 *
337 55 312 37 100-150-200-250 2,43 SR660A312 *
359 55 334 37 100-150-200-250 2,52 SR660A334 *
387 55 362 37 100-150-200-250 2,61 SR660A362 *
LS
*Complete the code by inserting the value of the radius (R): Ex. SR660A050 1 5 0
MOVING POINT LS Chain equipped with nylon frame every pitch: complete the code by inserting the letter D.
2 M1 R Ex. SR660A050150 D
H R H N M N1 M1
200
mm mm mm mm mm mm
FIXED POINT N1 100 255 180 415 205 470
150 355 230 575 360 855
Length of chain (L) 200 455 280 730 535 1290
2
L= LS + M or M1
2
76 Version with frames mounted on every pitch.

®

2
)
SR660A
Nylon Cable Chain
in relationship to the weight Type* with openable frames
15
13
10
9
8
7
6
5
4
3
3
2,5 Fig. A Fig. B
2 The chain can be fixed frontally, Chain fixed outside the radius. (Fig B) Separation System
1,5 inner or outer radius. (Fig A) See end brackets mounting
See end brackets mounting variations page 31. To choose the separators see
0 0,5 1 1,5 2 2,5 3
L 59,5 L 114
2 20
15
20
LS 17 10
10 32 10
LS ø5.5
2
6.5 12
F F

difference of weight between SR660A050 61 SR660A050 38
SR660A061 72 SR660A061 49
various widths of chains SR660A075 86 SR660A075 63
SR660A081 92 SR660A081 69
assembled with nylon frames SR660A095 106 SR660A095 83
every second pitch. SR660A100 111 SR660A100 88 How to open the cover.
SR660A107 118 SR660A107 95
SR660A117 128 SR660A117 105
SR660A125 136 SR660A125 113
SR660A136 147 SR660A136 124
and weights not included in SR660A150 161 SR660A150 138
SR660A200 211 SR660A200 188
SR660A225 236 SR660A225 213
capacity, verify the possible SR660A252 263 SR660A252 240
SR660A261 272 SR660A261 249
use of support rollers (see SR660A312 323 SR660A312 300
page 30). SR660A334 345 SR660A334 333
SR660A362 373 SR660A362 350
Suitable to long travel distance
Nylon Type Bright Zinc Plated Steel in frame every pitch version.
SR660A... AN660AKM SR660A... A660AKM ** connecting pivots:
Part Number PZ010.
Type Set Type Set
SR660A... AN660AK SR660A... A660AK **
** 1=Pos.1; 2=Pos.2; 3=Pos.3
Chain Tiewrap Clamp
See end brackets mounting variations For further information please
Type Part Number page 31 consult Brevetti Stendalto’s
SR660A... CFC660A * Technical Office
SR770A
Nylon Cable Chain
Separator
A Part.no S770A
- Unassembled
single-pin. Frames openable from inner
radius. As standard the chain comes
for C > 200 mm
with frames every second link, on 7 D B 5
Part.no S770AH
- Unassembled
request with frames every link. - Assembled Part.no S770AHMC
Vertical and horizontal modular Pin
separator system is available. S770AH Part.no PG770

80 78 45 60 130-150-200-250-300 2,25 SR770A045 *
Speed 6 m/s 91 78 56 60 130-150-200-250-300 2,25 SR770A056 *
105
111
78
78
70
76
60
60
130-150-200-250-300
130-150-200-250-300
2,31 SR770A070
2,32 SR770A076
*
*
technical dept. 125 78 90 60 130-150-200-250-300 2,36 SR770A090 *
130 78 95 60 130-150-200-250-300 2,36 SR770A095 *
137 78 102 60 130-150-200-250-300 2,38 SR770A102 *
slightly change according to frequency, added 147 78 112 60 130-150-200-250-300 2,39 SR770A112 *
weight and environment. 155 78 120 60 130-150-200-250-300 2,43 SR770A120 *
166 78 131 60 130-150-200-250-300 2,46 SR770A131 *
180 78 145 60 130-150-200-250-300 2,49 SR770A145 *
205 78 170 60 130-150-200-250-300 2,55 SR770A170 *
230 78 195 60 130-150-200-250-300 2,62 SR770A195 *
LS N
LS 241 78 206 60 130-150-200-250-300 2,65 SR770A206 *
2 R 255 78 220 60 130-150-200-250-300 2,68 SR770A220 *
282 78 247 60 130-150-200-250-300 2,75 SR770A247 *
70 M H 291 78 256 60 130-150-200-250-300 2,77 SR770A256 *
342 78 307 60 130-150-200-250-300 2,88 SR770A307 *
364 78 329 60 130-150-200-250-300 2,94 SR770A329 *
392 78 357 60 130-150-200-250-300 3,01 SR770A357 *
LS
*Complete the code by inserting the value of the radius (R): Ex. SR770A045 1 5 0
MOVING POINT LS Chain equipped with nylon frame every pitch: complete the code by inserting the letter D.
2 M1 R Ex. SR770A045150 D
H R H N M N1 M1
250
mm mm mm mm mm mm
FIXED POINT N1 130 338 240 555 305 685
150 378 260 615 340 785
Length of chain (L) 200 478 310 770 515 1220
2 300 678 410 1085 865 2095
L= LS + M or M1
2

®

2
)
SR770A
Nylon Cable Chain
in relationship to the weight Type* with openable frames
20
15
10
8
7
6
5
4
3,5
3
2,5
2
1,5
Fig. A
Fig. B
variations page 31.
Separation System
3
0 1 2 3 4
L 79 L 167,5
2
26,5
25
26,5
LS 20 15 10 45 10
LS ø6.2
2
F 8.5 15
F

difference of weight between SR770A045 61 SR770A045 19
SR770A056 72 SR770A056 30
various widths of chains SR770A070 86 SR770A070 44
SR770A076 92 SR770A076 50
assembled with nylon frames SR770A090 106 SR770A090 64
every second pitch. SR770A095 111 SR770A095 69 How to open the cover.
SR770A102 118 SR770A102 76
SR770A112 128 SR770A112 86
SR770A120 136 SR770A120 94
SR770A131 147 SR770A131 105
and weights not included in SR770A145 161 SR770A145 119
SR770A195 211 SR770A195 169
SR770A220 236 SR770A220 194
capacity, verify the possible SR770A247 263 SR770A247 221
SR770A256 272 SR770A256 230
use of support rollers (see SR770A307 323 SR770A307 281
page 30). SR770A329 345 SR770A329 303
SR770A357 373 SR770A357 331
Suitable to long travel distance
Nylon Type Bright Zinc Plated Steel in frame every pitch version.
connecting pivots:
SR770A... AN770AKM SR770A... A770AKM ** Part Number PZ010.
Type Set Type Set
SR770A... AN770AK SR770A... A770AK **
** 1=Pos.1; 2=Pos.2; 3=Pos.3
Chain Tiewrap Clamp
Type Part Number page 31 consult Brevetti Stendalto’s
SR770A... CFC770A * Technical Office
SR475MI/SR475ME
Nylon Cable Chain
Separator
A - Unassembled Part.no S309S
- Assembled Part.no S309SMC
Frames are openable from inner radius
(SR475MI ) or from outer radius
for C > 250 mm
(SR475ME) . Part.no S309SH
5 6 - Unassembled
Vertical and horizontal modular D B
separator system is available. Pin
C S309SH Part.no PG475

112 100,5 74 75,5 150-180-200-250-300-350-400 3,70 SR475MI(ME)074 *
Speed 8 m/s 132 100,5 94 75,5 150-180-200-250-300-350-400 3,80 SR475MI(ME)094 *
157
164
100,5
100,5
119
126
75,5
75,5
150-180-200-250-300-350-400 3,85 SR475MI(ME)119
150-180-200-250-300-350-400 3,90 SR475MI(ME)126
*
*
technical dept. 187 100,5 149 75,5 150-180-200-250-300-350-400 3,95 SR475MI(ME)149 *
227 100,5 189 75,5 150-180-200-250-300-350-400 4,05 SR475MI(ME)189 *
262 100,5 224 75,5 150-180-200-250-300-350-400 4,15 SR475MI(ME)224 *
LS N
288 100,5 250 75,5 150-180-200-250-300-350-400 4,25 SR475MI(ME)250 *
LS
2 312 100,5 274 75,5 150-180-200-250-300-350-400 4,30 SR475MI(ME)274 *
R 338 100,5 300 75,5 150-180-200-250-300-350-400 4,37 SR475MI(ME)300 *
362 100,5 324 75,5 150-180-200-250-300-350-400 4,45 SR475MI(ME)324 *
105 M H
388 100,5 350 75,5 150-180-200-250-300-350-400 4,55 SR475MI(ME)350 *
412 100,5 374 75,5 150-180-200-250-300-350-400 4,60 SR475MI(ME)374 *
536 100,5 498 75,5 150-180-200-250-300-350-400 5,00 SR475MI(ME)498 *
Length of chain (L) *Complete the code by inserting the value of the radius (R): Ex. SR475MI(ME)119 1 5 0
Chain equipped with nylon frame every pitch: complete the code by inserting the letter D.
Half travel distance ( LS ) Ex. SR475MI(ME)119150 D
2
L= LS + M
2
R H N M
mm mm mm mm
150 400,5 310 690
180 460,5 335 775
200 500,5 355 840
250 600,5 405 995
300 700,5 460 1155
350 800,5 505 1310
400 900,5 560 1470

®

2
)
two ends of the chain to SR475MI
SR475ME
Nylon Cable Chain
40
30
20
15
10
8
6
5
4
3
2
1,5
Fig. A
Separation System
3
1 See end brackets mounting page. 176
0 1 2 3 4 5 6 7
variations page 31.
2 L 105
LS
LS
2 70
15 40 15
22
11
F A
diagram area considers the 40
difference of weight between Chain F
various widths of chains Type mm
assembled with nylon frames SR475MI(ME)074 35
every second pitch. SR475MI(ME)094 55 How to open the cover.
SR475MI(ME)119 80
For applications with LS2 SR475MI(ME)126 87
and weights not included in SR475MI(ME)149 110
the area of the diagram SR475MI(ME)189 150
showing self-supporting SR475MI(ME)224 185
capacity, verify the possible SR475MI(ME)250 211
use of support rollers (see SR475MI(ME)274 235
page 30). SR475MI(ME)300 261
SR475MI(ME)324 285
SR475MI(ME)350 311
SR475MI(ME)374 335
SR475MI(ME)498 459
Bright Zinc Plated Steel
Type Part Numbers
Chain End Brackets
Type Set
SR475... A475M KM **
Chain End Brackets
Type Set
SR475... A475M K ** For further information please
*Available on request in stainless steel consult Brevetti Stendalto’s
** 1=Pos.1; 2=Pos.2; 3=Pos.3 Technical Office
page 31. 81
Guide Channel
SR305-SR355-SR435MI-SR435ME
Special Channel guide allows the use of
request, in stainless steel

LS
LS LS
2 2
R
A B
A B
LS
LS LS
2 2
R
A A
A A
GUIDE EMPTY SECTION
Channel guide is available in kit

composed by:
joining plates
fixing screws
2000
FIXING PLATE
SIDE WALL
JOINING AND
SUPPORT PLATE
BASE
82
®
Guide Empty Section SR305-SR355-SR435

Section A-A
Part Number
CS305…
How to order
Guide channel
A1=A+4 part number CS305008
96.5
CS355…
How to order
20
A2=A+87
Guide channel
part number CS355045
CS435…
How to order
3
Guide Sliding Plate Section SR305 Guide channel
Section B-B part number CS435050
Part Number
CA305…
How to order
Guide channel
96.5
30
20
A2=A+87

Section B-B
Part Number
CA355…
How to order
Guide channel
96.5
45
20
A2=A+87

Section B-B
Part Number
CA435…
How to order
Guide channel
96.5
48
20
A2=A+87
Technical Office
83
Nylon Cable Chains
Heavy Series
Series SR306SI-SR306SE page 86

Series SR306B page 88
Series SR306F page 90
Series SR310T page 108
Horizontal Separation page 176
Inner surface of chain completely smooth
Steel or nylon end brackets

Wide range of cross pieces
available in the following types:
Open and close, with a
“Snap-Fit” action
Aluminium Rods
With Pre-Drilled Holes
Nylon separator. Cables can be laid

apart from each other
Triple connecting Pivot Pin

which offers high integrity in
high performance applications
85
SR306SI/SR306SE
Nylon Cable Chain
Strong double share Sideband & Frame
Separator
A - Unassembled Part.no S660A
triple-pin. Frames openable from inner
radius (..SI) and outer radius (..SE).
for C > 200 mm
As standard the chain comes with Part.no S660AH
5
- Unassembled
frames every second link, on request D B 3
- Assembled Part.no S660AHMC
with frames every link. Pin
Vertical and horizontal modular
C S660AH Part.no PG307

79 55 43 37 075-107-150-200-250-300 1,61 SR306SI(SE)043 *
Speed 8 m/s 90 55 54 37 075-107-150-200-250-300 1,61 SR306SI(SE)054 *
104
110
55
55
68
74
37
37
075-107-150-200-250-300 1,68 SR306SI(SE)068
075-107-150-200-250-300 1,70 SR306SI(SE)074
*
*
technical dept. 124 55 88 37 075-107-150-200-250-300 1,74 SR306SI(SE)088 *
129 55 93 37 075-107-150-200-250-300 1,74 SR306SI(SE)093 *
136 55 100 37 075-107-150-200-250-300 1,76 SR306SI(SE)100 *
LS N 146 55 110 37 075-107-150-200-250-300 1,77 SR306SI(SE)110 *
LS 154 55 118 37 075-107-150-200-250-300 1,82 SR306SI(SE)118 *
2 R 165 55 129 37 075-107-150-200-250-300 1,85 SR306SI(SE)129 *
65
179 55 143 37 075-107-150-200-250-300 1,89 SR306SI(SE)143 *
M H 204 55 168 37 075-107-150-200-250-300 1,96 SR306SI(SE)168 *
229 55 193 37 075-107-150-200-250-300 2,04 SR306SI(SE)193 *
240 55 204 37 075-107-150-200-250-300 2,07 SR306SI(SE)204 *
Length of chain (L) 254 55 218 37 075-107-150-200-250-300 2,11 SR306SI(SE)218 *
281 55 245 37 075-107-150-200-250-300 2,19 SR306SI(SE)245 *
2 290 55 254 37 075-107-150-200-250-300 2,22 SR306SI(SE)254 *
plus length of curve (M) 341 55 305 37 075-107-150-200-250-300 2,34 SR306SI(SE)305 *
363 55 327 37 075-107-150-200-250-300 2,41 SR306SI(SE)327 *
L= LS + M 391 55 355 37 075-107-150-200-250-300 2,49 SR306SI(SE)355 *
2
*Complete the code by inserting the value of the radius (R): Ex. SR306SI(SE)110 1 5 0
R H N M Ex. SR306SI(SE)110150 D
mm mm mm mm
075 205 170 370
107 269 205 470
150 355 245 605
200 455 295 760
250 555 345 920
300 655 395 1075

®

2
)
SR306SI
Type* SR306SE
Nylon Cable Chain
30
20
15
10
8
6
5
4
Fig. A Fig. B
3
2
1,5
variations page 31.
Separation System
3
1 page. 176
0 1 2 3 L 68 L 63.5
2 16.5
22
16.5
LS
20 12 102
LS
2 10 32 10
ø6.5 12
ø6.5 6.5
F A FA
difference of weight between Chain F Chain F
various widths of chains Type mm Type mm
assembled with nylon frames SR306SI(SE)043 61 SR306SI(SE)043 36 How to open the cover.
every second pitch. SR306SI(SE)054 72 SR306SI(SE)054 47
SR306SI(SE)068 86 SR306SI(SE)068 61
SR306SI(SE)074 92 SR306SI(SE)074 67
SR306SI(SE)088 106 SR306SI(SE)088 81
SR306SI(SE)093 111 SR306SI(SE)093 86
and weights not included in SR306SI(SE)100 118 SR306SI(SE)100 93
the area of the diagram SR306SI(SE)110 128 SR306SI(SE)110 103 Protection version
SR306SI(SE)118 136 SR306SI(SE)118 111
showing self-supporting SR306SI(SE)129 147 SR306SI(SE)129 122
SR306SI(SE)143 161 SR306SI(SE)143 136
capacity, verify the possible SR306SI(SE)168 186 SR306SI(SE)168 161
SR306SI(SE)193 211 SR306SI(SE)193 186
use of support rollers (see SR306SI(SE)204 222 SR306SI(SE)204 197
page 30). SR306SI(SE)218 236 SR306SI(SE)218 211
SR306SI(SE)245 263 SR306SI(SE)245 238
SR306SI(SE)254 272 SR306SI(SE)254 247
SR306SI(SE)305 323 SR306SI(SE)305 298
SR306SI(SE)327 345 SR306SI(SE)327 320
SR306SI(SE)355 373 SR306SI(SE)355 348
Protection version
Nylon Type Bright Zinc Plated Steel see page 126
Type Set Type Set
SR306SI(SE)... AN306KM SR306SI(SE)... A306SKM **
Type Set Type Set
SR306SI(SE)... AN306K SR306SI(SE)... A306SK ** For further information please
page 31. 87
SR306B
Nylon Cable Chain
with un-screwable aluminium rods
Strong double share Sideband &
Frame construction with large
anti-friction triple-pin. Alu-rod frames
are un-screwable from inner and outer A
Separator
radius. As standard the chain comes C
- Unassembled Part.no S2000F
with frames every second link, on - Assembled Part.no S2000FMC
request with frames every link. 4 D B Pin
Vertical and horizontal separator
Part.no PG307
systems are available.

115 55 75 30 075-107-150-200-250-300 1,60 SR306B075 *
Speed 8 m/s 140 55 100 30 075-107-150-200-250-300 1,65 SR306B100 *
190
240
55
55
150
200
30
30
075-107-150-200-250-300
075-107-150-200-250-300
1,80
1,90
SR306B150 *
SR306B200 *
technical dept. 290 55 250 30 075-107-150-200-250-300 2,00 SR306B250 *
340 55 300 30 075-107-150-200-250-300 2,15 SR306B300 *
C+40 55 ..... 30 075-107-150-200-250-300 SR306B **
*Complete the code by inserting the value of the radius (R): Ex. SR306B075 1
Where: 1=075; 2=107; 3=150; 4=200; 5=250; 6=300.
**Complete the code by inserting the value of the quote C and the radius (R): Ex. SR306B 1 2 3 1
Chain equipped with aluminium rods every pitch: complete the code by inserting the letter D.
Ex. SR306B0751 D
LS N
R H N M
LS mm mm mm mm
2 R 075 205 170 370
107 269 205 470
65 M 150 355 245 605
H
200 455 295 760
250 555 345 920
Length of chain (L) 300 655 395 1075

2
L= LS + M
2
88 Version with Alu-rods on every second pitch.

®

2
)
SR306B
Nylon Cable Chain
in relationship to the weight Type* with un-screwable
of the cables and hoses aluminium rods
30
20
15
10
8
6
5
4
3
2
1,5
Fig. A
Fig. B
3
1 inner or outer radius. (Fig A) See end brackets mounting
0 1 2 3 variations page 31.
2
LS L 68 L 63.5
LS 16.5
2 22
16.5
20 12 102
10 32 10

ø6.5 12
diagram area considers the ø6.5 6.5
F A FA
various widths of chains
30
assembled with rods every
second pitch.
Chain F Chain F
For applications with LS Steel laminar cover.
2 Type mm Type mm
SR306B075 96 SR306B075 71
the area of the diagram SR306B100 121 SR306B100 96
showing self-supporting SR306B150 171 SR306B150 146
capacity, verify the possible SR306B200 221 SR306B200 196
use of support rollers (see SR306B250 271 SR306B250 246
page 30). SR306B300 321 SR306B300 296
Special dimension F=A-19 Special dimension F=A-44
Supplementary movable
separators.
Complete Set Assembled Complete Set Assembled Special tool to remove the
Chain End Brackets Chain End Brackets connecting pivots:
SR306B... AN306KM SR306B... A306KM **
Type Set Type Set
SR306B... AN306K SR306B... A306K **
*Available on request in stainless steel For further information please
** 1=Pos.1; 2=Pos.2; 3=Pos.3 consult Brevetti Stendalto’s
See end brackets mounting variations Technical Office
page 31.
89
SR306F
Nylon Cable Chain
with un-screwable split cross pieces with holes
triple-pin. Un-screwable nylon split
cross pieces with different hole
combinations. As standard the chain A
comes with frames every second link, ø ø ø ø ø ø
on request with frames every link.
B Pin
Part.no PG307
Technical characteristics A B N. Ø R Weight/m Chain

when self-supported mm mm holes mm mm kg Part Number
89 55 2 22 075-107-150-200-250-300 1,80 SR306001 *
Speed 8 m/s 155 55 6 17 075-107-150-200-250-300 2,05 SR306002 *
193
214
55
55
6+2 17+20 075-107-150-200-250-300
6 25 075-107-150-200-250-300
2,30
2,55
SR306003
SR306004
*
*
technical dept. 113 55 3 23 075-107-150-200-250-300 1,95 SR306005 *
*Complete the code by inserting the value of the radius (R): Ex. SR306002 1
Where: 1=075; 2=107; 3=150; 4=200; 5=250; 6=300
Ex. SR3060021 D
LS N
R H N M
LS mm mm mm mm
2 R 075 205 170 370
107 269 205 470
65 M 150 355 245 605
H
200 455 295 760
250 555 345 920
Length of chain (L) 300 655 395 1075

2
L= LS + M
2
90 Version with cross pieces on every second pitch.

®

2
)
SR306F
Nylon Cable Chain
of the cables and hoses nylon split cross
contained per linear metre. pieces with holes
30
20
15
10
8
6
5
4
3
2
1,5
Fig. A
Fig. B
3
0 1 2 3 variations page 31.
2
LS L 68 L 63.5
LS 16.5
2 22
16.5
20 12 102
10 32 10

ø6.5 12
diagram area considers the ø6.5 6.5
F A FA
30
assembled with nylon cross
pieces every second pitch.
Steel laminar cover.
Chain F Chain F
Type mm Type mm
SR306001 70 SR306001 45
SR306002 136 SR306002 111
SR306003 174 SR306003 149
SR306004 195 SR306004 170
page 30). SR306005 94 SR306005 69

SR30600... AN306KM SR30600... A306KM **
Type Set Type Set
SR30600... AN306K SR30600... A306K **
page 31.
91
SR307SI/SR307SE
Nylon Cable Chain
Separator
for C > 200 mm
As standard the chain comes with Part.no S307SH
5
- Unassembled
frames every second link, on request D B
C Part.no PG307

80 64 42 47 075-090-120-140-200-250 1,86 SR307SI(SE)042 *
Speed 8 m/s 91 64 53 47 075-090-120-140-200-250 1,86 SR307SI(SE)053 *
105
111
64
64
67
73
47
47
075-090-120-140-200-250 1,92 SR307SI(SE)067
075-090-120-140-200-250 1,94 SR307SI(SE)073
*
*
130 64 92 47 075-090-120-140-200-250 1,97 SR307SI(SE)092 *
137 64 99 47 075-090-120-140-200-250 1,99 SR307SI(SE)099 *
LS N 147 64 109 47 075-090-120-140-200-250 2,00 SR307SI(SE)109 *
LS 155 64 117 47 075-090-120-140-200-250 2,05 SR307SI(SE)117 *
2 R 166 64 128 47 075-090-120-140-200-250 2,07 SR307SI(SE)128 *
70
180 64 142 47 075-090-120-140-200-250 2,10 SR307SI(SE)142 *
M H 205 64 167 47 075-090-120-140-200-250 2,16 SR307SI(SE)167 *
230 64 192 47 075-090-120-140-200-250 2,23 SR307SI(SE)192 *
241 64 203 47 075-090-120-140-200-250 2,26 SR307SI(SE)203 *
282 64 244 47 075-090-120-140-200-250 2,37 SR307SI(SE)244 *
2 291 64 253 47 075-090-120-140-200-250 2,39 SR307SI(SE)253 *
364 64 326 47 075-090-120-140-200-250 2,56 SR307SI(SE)326 *
L= LS + M 392 64 354 47 075-090-120-140-200-250 2,63 SR307SI(SE)354 *
2
mm mm mm mm
075 214 180 375
090 244 195 425
120 304 225 520
140 344 245 580
200 464 305 770
250 564 355 925

®

2
)
SR307SI
Type* SR307SE
Nylon Cable Chain
30
20
15
10
8
6
5
4
Fig. A Fig. B
3
2
1,5
variations page 31.
Separation System
3
1 page. 176
0 1 2 3 4 L 70 72.5
L
2 17.5
30
LS 17.5
LS 20 13 114
2 14 32 14
ø6.5 12
6.5
ø6.5 FA FA
60
assembled with nylon frames SR307SI(SE)042 61 SR307SI(SE)042 31
SR307SI(SE)067 86 SR307SI(SE)067 56 How to open the cover.
SR307SI(SE)073 92 SR307SI(SE)073 62
SR307SI(SE)087 106 SR307SI(SE)087 76
SR307SI(SE)092 111 SR307SI(SE)092 81
the area of the diagram SR307SI(SE)109 128 SR307SI(SE)109 98
SR307SI(SE)117 136 SR307SI(SE)117 106
SR307SI(SE)142 161 SR307SI(SE)142 131
SR307SI(SE)192 211 SR307SI(SE)192 181
SR307SI(SE)244 263 SR307SI(SE)244 233
SR307SI(SE)253 272 SR307SI(SE)253 242
SR307SI(SE)304 323 SR307SI(SE)304 293
SR307SI(SE)326 345 SR307SI(SE)326 315
SR307SI(SE)354 373 SR307SI(SE)354 343

Complete Set Assembled Complete Set Assembled connecting pivots:
Type Set Type Set
Type Set Type Set
SR307SI(SE)... AN307K SR307SI(SE)... A307SK ** For further information please
page 31. 93
SR307B
Nylon Cable Chain
A
are un-screwable from inner and outer C Separator
radius. As standard the chain comes - Unassembled Part.no S307
with frames every second link, on - Assembled Part.no S307MC
request with frames every link. 4 D B Pin
Part.no PG307

117 64 75 40 075-090-120-140-200-250 1,80 SR307B075 *
Speed 8 m/s 142 64 100 40 075-090-120-140-200-250 1,85 SR307B100 *
192
242
64
64
150
200
40
40
075-090-120-140-200-250
075-090-120-140-200-250
1,95
2,05
SR307B150 *
SR307B200 *
342 64 300 40 075-090-120-140-200-250 2,25 SR307B300 *
C+42 64 ..... 40 075-090-120-140-200-250 SR307B **
Where: 0=090; 1=120; 2=140; 3=200; 4=250; 7=075
Ex. SR307B0751 D
LS N
R H N M
LS mm mm mm mm
2 R 075 214 180 375
090 244 195 425
70 M 120 304 225 520
H
140 344 245 580
200 464 305 770
Length of chain (L) 250 564 355 925

2
L= LS + M
2

®

2
)
SR307B
Nylon Cable Chain
30
20
15
10
8
6
5
4
3
2
1,5
Fig. A
Fig. B
3
0 1 2 3 4 variations page 31.
2
LS L 70 72.5
L
LS 17.5
2 30
17.5
20 13 114
14 32 14
diagram area considers the ø6.5 12
6.5
ø6.5 FA FA
35
second pitch.
Chain F Chain F
2 Type mm Type mm
SR307B075 98 SR307B075 68
page 30). SR307B300 323 SR307B300 293
Special dimension F=A-19 Special dimension F=A-49
separators.
SR307B... AN307KM SR307B... A307KM **
Type Set Type Set
SR307B... AN307K SR307B... A307K **
page 31.
95
SR307F
Nylon Cable Chain
combinations. As standard the chain A
comes with frames every second link, ø ø ø ø ø
B Pin
Part.no PG307

126 64 2 34 075-090-120-140-200-250 2,20 SR307001 *
Speed 8 m/s 214 64 6 25 075-090-120-140-200-250 2,50 SR307002 *
242
279
64
64
5
6
34
34
075-090-120-140-200-250
075-090-120-140-200-250
2,70
2,95
SR307003
SR307004
*
*
technical dept. 113 64 3 23 075-090-120-140-200-250 2,10 SR307005 *
Where: 0=090; 1=120; 2=140; 3=200; 4=250; 7=075
Ex. SR3070021 D
LS N
R H N M
LS mm mm mm mm
2 R 075 214 180 375
090 244 195 425
70 M 120 304 225 520
H
140 344 245 580
200 464 305 770

2
L= LS + M
2

®

2
)
SR307F
Nylon Cable Chain
30
20
15
10
8
6
5
4
3
2
1,5
Fig. A
Fig. B
3
0 1 2 3 4 variations page 31.
2
LS L 70 72.5
L
LS 17.5
2 30
17.5
20 13 114
14 32 14
diagram area considers the ø6.5 12
6.5
ø6.5 FA FA
35
Chain F Chain F
Type mm Type mm
SR307001 107 SR307001 77
SR307002 195 SR307002 165
SR307003 223 SR307003 193
SR307004 260 SR307004 230
page 30). SR307005 94 SR307005 64

SR30700... AN307KM SR30700... A307KM **
Type Set Type Set
SR30700... AN307K SR30700... A307K **
page 31.
97
SR308SI/SR308SE
Nylon Cable Chain
Separator
A - Unassembled Part.no S308C
- Assembled Part.no S308CMC
for C > 200 mm
As standard the chain comes with Part.no S308SHF
4 5
- Unassembled
- Assembled Part.no S308SHFMC

82 75 38 57 135-150-180-200-230-280-400 2,46 SR308SI(SE)038 *
Speed 8 m/s 93 75 49 57 135-150-180-200-230-280-400 2,46 SR308SI(SE)049 *
107
113
75
75
63
69
57
57
135-150-180-200-230-280-400 2,51 SR308SI(SE)063
135-150-180-200-230-280-400 2,53 SR308SI(SE)069
*
*
technical dept. 127 75 83 57 135-150-180-200-230-280-400 2,56 SR308SI(SE)083 *
132 75 88 57 135-150-180-200-230-280-400 2,56 SR308SI(SE)088 *
139 75 95 57 135-150-180-200-230-280-400 2,58 SR308SI(SE)095 *
LS N 149 75 105 57 135-150-180-200-230-280-400 2,59 SR308SI(SE)105 *
LS 157 75 113 57 135-150-180-200-230-280-400 2,62 SR308SI(SE)113 *
2 R 168 75 124 57 135-150-180-200-230-280-400 2,65 SR308SI(SE)124 *
80
182 75 138 57 135-150-180-200-230-280-400 2,67 SR308SI(SE)138 *
M H 207 75 163 57 135-150-180-200-230-280-400 2,73 SR308SI(SE)163 *
232 75 188 57 135-150-180-200-230-280-400 2,79 SR308SI(SE)188 *
243 75 199 57 135-150-180-200-230-280-400 2,81 SR308SI(SE)199 *
Length of chain (L) 257 75 213 57 135-150-180-200-230-280-400 2,84 SR308SI(SE)213 *
284 75 240 57 135-150-180-200-230-280-400 2,90 SR308SI(SE)240 *
2 293 75 249 57 135-150-180-200-230-280-400 2,92 SR308SI(SE)249 *
plus length of curve (M) 344 75 300 57 135-150-180-200-230-280-400 3,02 SR308SI(SE)300 *
366 75 322 57 135-150-180-200-230-280-400 3,07 SR308SI(SE)322 *
L= LS + M 394 75 350 57 135-150-180-200-230-280-400 3,13 SR308SI(SE)350 *
2
mm mm mm mm
135 345 255 585
150 375 270 635
180 435 300 725
200 475 320 790
230 535 350 885
280 635 400 1040
400 875 520 1420

®

2
)
SR308SI
Type* SR308SE
Nylon Cable Chain
40
30
20
15
10
8
6
5
Fig. A Fig. A
3
4
3 The chain can be fixed frontally, Chain fixed outside the radius. (Fig A)
2
inner or outer radius. (Fig A) See end brackets mounting Separation System
1,5 variations page 31. To choose the separators see
1 page. 176
0 1 2 3 4 5 L 73 L 78.5
2 26,5
21
LS 26,5
15 125
LS 10 45 10
2
ø6.5
8.5 15
FA F A
65
ø6.5

43
assembled with nylon frames SR308SI(SE)038 62 SR308SI(SE)038 20 How to open the cover.
SR308SI(SE)063 87 SR308SI(SE)063 45
SR308SI(SE)069 93 SR308SI(SE)069 51
SR308SI(SE)083 107 SR308SI(SE)083 65
SR308SI(SE)088 112 SR308SI(SE)088 70
the area of the diagram SR308SI(SE)105 129 SR308SI(SE)105 87 Protection version
SR308SI(SE)113 137 SR308SI(SE)113 95
SR308SI(SE)138 162 SR308SI(SE)138 120
SR308SI(SE)188 212 SR308SI(SE)188 170
SR308SI(SE)240 264 SR308SI(SE)240 222
SR308SI(SE)249 273 SR308SI(SE)249 231
SR308SI(SE)300 324 SR308SI(SE)300 282
SR308SI(SE)322 346 SR308SI(SE)322 304
SR308SI(SE)350 374 SR308SI(SE)350 332
Protection version
Nylon Type Bright Zinc Plated Steel see page 128
Type Set Type Set
SR308SI(SE)... AN308SKM SR308SI(SE)... A308SKM **
Type Set Type Set
SR308SI(SE)... AN308SK SR308SI(SE)... A308SK ** For further information please
page 31. 99
SR308B
Nylon Cable Chain
anti-friction triple-pin. Alu-rod frames A
are un-screwable from inner and outer C Separator
radius. As standard the chain comes - Unassembled Part.no S3000F
with frames every second link, on - Assembled Part.no S3000FMC
request with frames every link. 5 D B
Pin
Part.no PG308

156 75 100 48 150-180-200-230-280-400 2,85 SR308B100 *
Speed 8 m/s 206 75 150 48 150-180-200-230-280-400 3,00 SR308B150 *
256
306
75
75
200
250
48
48
150-180-200-230-280-400
150-180-200-230-280-400
3,15
3,30
SR308B200 *
SR308B250 *
C+56 75 ..... 48 150-180-200-230-280-400 SR308B **
Where: 1=150; 2=180; 3=200; 4=230; 5=280; 6=400
Ex. SR308B2001 D
LS N
R H N M
LS mm mm mm mm
2 R 150 375 270 635
180 435 300 725
80 M 200 475 320 790
H
230 535 350 885
280 635 400 1040
Length of chain (L) 400 875 520 1420

2
L= LS + M
2

®

2
)
SR308B
Nylon Cable Chain
40
30
20
15
10
8
6
3
4
3
2 Fig. A Fig. B
1,5 The chain can be fixed frontally, Chain fixed outside the radius. (Fig B)
0 1 2 3 4 5 variations page 31.
2
LS L 73 L 78.5
LS 26,5
2 21
26,5
15 125
10 45 10

ø6.5
diagram area considers the 8.5 15

FA F A
ø6.5

43
second pitch.
Chain F Chain F
2 Type mm Type mm
SR308B100 135 SR308B100 93
page 30). Special dimension F=A-21 Special dimension F=A-63
separators.
SR308B... AN308KM SR308B... A308KM **
Type Set Type Set
SR308B... AN308K SR308B... A308K **
page 31.
101
SR308F
Nylon Cable Chain
A
combinations. As standard the chain ø ø ø ø ø ø
comes with frames every second link,
B
Pin
Part.no PG308

132 75 2 34 150-180-200-230-280-400 3.05 SR308001 *
Speed 8 m/s 220 75 6 25 150-180-200-230-280-400 3,45 SR308002 *
248
285
75
75
5
6
34
34
150-180-200-230-280-400
150-180-200-230-280-400
3,60
3,80
SR308003
SR308004
*
*
technical dept. 132 75 2+1 28-23 150-180-200-230-280-400 3,05 SR308005 *
Where: 1=150; 2=180; 3=200; 4=230; 5=280; 6=400
Ex. SR3080031 D
LS N
R H N M
LS mm mm mm mm
2 R 150 375 270 635
180 435 300 725
80 M 200 475 320 790
H
230 535 350 885
280 635 400 1040
Length of chain (L) 400 875 520 1420

2
L= LS + M
2

®

2
)
SR308F
Nylon Cable Chain
40
30
20
15
10
8
6
3
4
3
2 Fig. A Fig. B
1,5 The chain can be fixed frontally, Chain fixed outside the radius. (Fig B)
0 1 2 3 4 5 variations page 31.
2
LS L 73 L 78.5
LS 26,5
2 21
26,5
15 125
10 45 10

ø6.5
diagram area considers the 8.5 15

FA F A
ø6.5

43
Chain F Chain F
Type mm Type mm
SR308001 111 SR308001 69
SR308002 199 SR308002 157
SR308003 227 SR308003 185
SR308004 264 SR308004 222
page 30). SR308005 111 SR308005 69

SR30800... AN308KM SR30800... A308KM **
Type Set Type Set
SR30800... AN308K SR30800... A308K **
page 31.
103
SR309SI/SR309SE
Nylon Cable Chain
Separator
for C > 250 mm
As standard the chain comes with Part.no S309SH
5 6 - Unassembled

120 100 64 75,5 200-250-300-350-400-500 4,03 SR309SI(SE)064 *
Speed 8 m/s 140 100 84 75,5 200-250-300-350-400-500 4,09 SR309SI(SE)084 *
165
172
100
100
109
116
75,5
75,5
200-250-300-350-400-500 4,17 SR309SI(SE)109
200-250-300-350-400-500 4,20 SR309SI(SE)116
*
*
technical dept. 195 100 139 75,5 200-250-300-350-400-500 4,27 SR309SI(SE)139 *
235 100 179 75,5 200-250-300-350-400-500 4,40 SR309SI(SE)179 *
270 100 214 75,5 200-250-300-350-400-500 4,51 SR309SI(SE)214 *
LS N 296 100 240 75,5 200-250-300-350-400-500 4,60 SR309SI(SE)240 *
LS 320 100 264 75,5 200-250-300-350-400-500 4,67 SR309SI(SE)264 *
2 R 346 100 290 75,5 200-250-300-350-400-500 4,75 SR309SI(SE)290 *
100 370 100 314 75,5 200-250-300-350-400-500 4,83 SR309SI(SE)314 *
M H
396 100 340 75,5 200-250-300-350-400-500 4,90 SR309SI(SE)340 *
420 100 364 75,5 200-250-300-350-400-500 4,99 SR309SI(SE)364 *
544 100 488 75,5 200-250-300-350-400-500 5,40 SR309SI(SE)488 *
Length of chain (L) *Complete the code by inserting the value of the radius (R): Ex. SR309SI(SE)116 2 5 0
Half travel distance ( LS ) Ex. SR309SI(SE)116250 D
2
R H N M
L= LS + M
2 mm mm mm mm
200 500 350 830
250 600 400 985
300 700 455 1145
350 800 500 1300
400 900 555 1460
500 1100 650 1770

®

2
)
SR309SI
Type* SR309SE
Nylon Cable Chain
40
30
20
15
10
8
6
5
Fig. A Fig. B
4
3
2
1,5
variations page 31.
Separation System
3
1 page. 176
0 1 2 3 4 5 6 7 L 140 L 100
2 27
46
LS 27
50 25,5
LS
2 157
15 50 15
ø10.5 11 22
ø10.5 FA 80 FA
assembled with nylon frames SR309SI(SE)064 92 SR309SI(SE)064 50
SR309SI(SE)109 137 SR309SI(SE)109 95
SR309SI(SE)116 144 SR309SI(SE)116 102
SR309SI(SE)179 207 SR309SI(SE)179 165 Protection version
the area of the diagram SR309SI(SE)214 242 SR309SI(SE)214 200
SR309SI(SE)340 368 SR309SI(SE)340 326
SR309SI(SE)364 392 SR309SI(SE)364 350
SR309SI(SE)488 516 SR309SI(SE)488 474
Nylon Type Bright Zinc Plated Steel Protection version


Type Set Type Set
Type Set Type Set
SR309SI(SE)... AN309K SR309SI(SE)... A309SK **
page 31.
105
SR309B
Nylon Cable Chain
A
C
are un-screwable from inner and outer Separator
radius. As standard the chain comes - Unassembled Part.no S309C
with frames every second link, on - Assembled Part.no S309CMC
D B
request with frames every link. 10
Pin
Part.no PG309

156 100 100 70 200-250-300-350-400-500 4,20 SR309B100 *
Speed 8 m/s 206 100 150 70 200-250-300-350-400-500 4,40 SR309B150 *
256
306
100
100
200
250
70
70
200-250-300-350-400-500
200-250-300-350-400-500
4,55
4,70
SR309B200 *
SR309B250 *
456 100 400 70 200-250-300-350-400-500 5,20 SR309B400 *
C+56 100 ..... 70 200-250-300-350-400-500 SR309B **
Where: 2=200; 3=250; 4=300; 5=350; 6=400; 7=500
Ex. SR309B1502 D
R H N M
LS N
LS
mm mm mm mm
2 R 200 500 350 830
250 600 400 985
100 M 300 700 455 1145
H
350 800 500 1300
400 900 555 1460
Length of chain (L) 500 1100 650 1770

2
L= LS + M
2

®

2
)
SR309B
Nylon Cable Chain
40
30
20
15
10
8
6
5
Fig. A Fig. B
3
4
2
1,5
variations page 31.
1
0 1 2 3 4 5 6
L 140 L 100
2 27
46
LS 27
LS 50 25,5
2 157
15 50 15
ø10.5 11 22
ø10.5 FA FA Supplementary movable
80
The red marking in the separators.
Chain F Chain F
Type mm Type mm Version with aluminium
second pitch.
SR309B100 129 SR309B100 87 draw plates
SR309B150 179 SR309B150 137
and weights not included in SR309B200 229 SR309B200 187
use of support rollers (see Special dimension F=A-27 Special dimension F=A-69
page 30).
On request available with
aluminium draw plates
Nylon Type Bright Zinc Plated Steel Example Part Number:

SR309T * **
Complete Set Assembled Complete Set Assembled * Inner width (C)
Chain End Brackets Chain End Brackets ** Bending radius (R)
Type Set Type Set
SR309B... AN309KM SR309B... A309KM **
Type Set Type Set
SR309B... AN309K SR309B... A309K **
page 31.
107
SR310T
Nylon Cable Chain
with un-screwable aluminium draw plates
Frame construction with three large
anti-friction single-pin/bush.
A
Alu-draw frames are mounted on every C Separator
link and are un-screwable from inner - Unassembled Part.no S310TCF9
and outer radius. - Assembled Part.no S310TCF9MC
Vertical and horizontal separator D B
Pin
10
Part.no B310-PG310

260 150 200 112 200-300-400-500-600-700-750 7,15 SR310T200 *
Speed 4 m/s 360 150 300 112 200-300-400-500-600-700-750 7,60 SR310T300 *
460
560
150
150
400
500
112
112
200-300-400-500-600-700-750 8,05 SR310T400
200-300-400-500-600-700-750 8,50 SR310T500
*
*
technical dept. 660 150 600 112 200-300-400-500-600-700-750 9,00 SR310T600 *
C+60 150 .... 112 200-300-400-500-600-700-750 SR310T **
*Complete the code by inserting the value of the radius (R): Ex. SR310T200 2 0 0
**Complete the code by inserting the value of the quote C and the radius (R): Ex. SR310T 1 2 3 2 0 0
LS N R H N M
LS mm mm mm mm
2 R 200 550 420 920
145 M H
300 750 525 1235
400 950 625 1550
500 1150 720 1860
600 1350 820 2175
Length of chain (L) 700 1550 920 2490
750 1650 970 2650
2
L= LS + M
2
108
®

2
)
SR310T
Nylon Cable Chain
in relationship to the weight with un-screwable
of the cables and hoses aluminium draw
contained per linear metre. plates
100
60
40
20
10
8
3
6
4 Fig. A
3 Chain fixed outside the radius. (Fig A)
2 See end brackets mounting
1
variations page 31.
0 1 2 3 4 5 6 7

2
L 127
LS
LS
2
210
100
20 60 20
difference of weight between 100 F
64
Chain F
2 Type mm
SR310T200 180
the area of the diagram SR310T300 280
showing self-supporting SR310T400 380
capacity, verify the possible SR310T500 480
use of support rollers (see SR310T600 580
page 30). Special dimension F=A-80
separators.
Type Part Numbers
Chain End Brackets
Type Set
SR310T... A310KM **
Chain End Brackets
Type Set
SR310T... A310K **
page 31.
109
Nylon Cable Chains
Protection Series
Series SR325PI page 112 New
Series SR435PI-SR435PE page 114

Series SR445AI-SR445AE page 118
Series SR306CI-SR306CE page 126
Series SR309C page 130

completely smooth
Special End Brackets on

moving end of chain
Completely enclosed
Quickly removable design to protect chain
covers with a contents from steel and
“Snap-Fit” action wood chips, dust, etc.
Nylon separator
cables can be
laid apart from
each other
Connecting Pivot Pin which offers

high integrity in high
performance applications
111
New
SR325PI
Nylon Cable Chain
Vertical separators available. 2,5 D B
Separator
C - Unassembled Part.no S325L
A - Assembled Part.no S325LMC

57 38 40 25 075-100-125-150 1,15 SR325PI040 *
Speed 10 m/s 77 38 60 25 075-100-125-150 1,30 SR325PI060 *
93
120
38
38
76
103
25
25
075-100-125-150
075-100-125-150
1,40
1,70
SR325PI076
SR325PI103
*
*
technical dept. *Complete the code by inserting the value of the radius (R): Ex. SR325PI040 0 7 5

2 075 188 140 325 185 420
R
100 238 165 405 275 635

45 125 288 190 485 360 855
M H
150 338 215 565 445 1075
LS
LS
2 M1 R
MOVING POINT
H
140
FIXED POINT N1
Length of chain (L)

2
L= LS + M o M1
2
112
®

2
)
SR325PI
Nylon Cable Chain
in relationship to the weight Nylon Type Bright Zinc Plated Steel with openable frames
of the cables and hoses Type*
10
9
8
7
6
5
4,5
4
3,5
3
2,5
1,5
1 Separation System
3
0,5 page. 176
0 0,5 1 1,5 2 2,5
LS Max unsupported length Fig. A Fig. B

2 Chain fixed outside/inside the Chain fixed outside the radius. (Fig B)
radius. (Fig A) See end brackets mounting
LS variations page 31.
LS
2 60,5 L 66,5 50 L 50
Ø8,5
14
7
24 38
7 Ø5,2 8 24 8
14
diagram area considers the 40 6,5 F1
F F2
Chain F Chain F2 F1
Type mm Type mm mm
For applications with LS2 SR325PI...040 51 SR325PI...040 20 23,5
and weights not included in SR325PI...060 71 SR325PI...060 40 43,5
the area of the diagram SR325PI...076 87 SR325PI...076 56 59,5
showing self-supporting SR325PI...103 114 SR325PI...103 83 86,5
Type Set Type Set
SR325PI... AN325P *KM SR325PI... A325LK**
Chain End Brackets Disponible aussi pour les
variations page 31.
Type Set longues courses.
Pour le choix du guide, voir
SR325PI... AN325P *K page. 54
Tiewrap Clamp
Part Number
Assembled
CFC325L *KM
Unassembled For further information please
CFC325L *K consult Brevetti Stendalto’s
113
SR435PI/SR435PE
Nylon Protection Cable Chain
with openable covers
Covers are openable from inner radius
(SR435PI ) or from outer radius Separator
(SR435PE). - Unassembled Part.no S4353
Pin
C Part.no PG4353

60 49 40 35 075-100-125-150-200 1,25 SR435PI(PE)040 *
Speed 10 m/s 70 49 50 35 075-100-125-150-200 1,40 SR435PI(PE)050 *
80
96
49
49
60
76
35
35
075-100-125-150-200
075-100-125-150-200
1,45 SR435PI(PE)060
1,60 SR435PI(PE)076
*
*
technical dept. 117 49 97 35 075-100-125-150-200 1,75 SR435PI(PE)097 *
123 49 103 35 075-100-125-150-200 1,90 SR435PI(PE)103 *
LS N
145 49 125 35 075-100-125-150-200 2,10 SR435PI(PE)125 *
LS 170 49 150 35 075-100-125-150-200 2,35 SR435PI(PE)150 *
2
R *Complete the code by inserting the value of the radius (R): Ex. SR435PI(PE)040 0 6 0
50 M H R H N M
mm mm mm mm
075 199 155 340
100 249 175 415
Half travel distance ( LS ) 150 349 230 575
2 200 449 275 730
L= LS + M
2
114
®

2
)
SR435PI
Type*
SR435PE
Nylon Protection Cable
contained per linear metre. Chain
15
13
10
9
8
7
6
5
4
3
3
2,5
2
Separation System
1,5
Fig. A Fig. B To choose the separators see
1 The chain can be fixed frontally, Chain fixed outside the radius. (Fig B) page. 176
0 0,5 1 1,5 2 2,5 3 inner or outer radius. (Fig A) See end brackets mounting
2
L 65 L 107,5
17
LS
LS 15
2 17
17 7
ø5.5 8,5 24 8,5
6,5 12
The red marking in the F F
Chain F Chain F
Type mm Type mm
SR435PI(PE)040 51 SR435PI(PE)040 30 How to open the cover.
SR435PI(PE)050 61 SR435PI(PE)050 40
and weights not included in SR435PI(PE)060 71 SR435PI(PE)060 50
the area of the diagram SR435PI(PE)076 87 SR435PI(PE)076 66
showing self-supporting SR435PI(PE)097 108 SR435PI(PE)097 87
capacity, verify the possible SR435PI(PE)103 114 SR435PI(PE)103 93
use of support rollers (see SR435PI(PE)125 136 SR435PI(PE)125 115
page 30). SR435PI(PE)150 161 SR435PI(PE)150 140

Type Set Type Set
SR435... AN435P *KM SR435... A435P KM ** Special tool to remove the
connecting pivots:
Type Set Type Set
SR435... AN435P *K SR435... A435P K **
** 1=Pos.1; 2=Pos.2; 3=Pos.3
Part Number See end brackets mounting variations
Assembl. CFC435M *KM page 31. For further information please
Unassembl. CFC435M *K consult Brevetti Stendalto’s
115
SR445PI/SR445PE
(SR445PI ) or from outer radius Separator
(SR445PE). - Unassembled Part.no S445UF
Pin
C Part.no PG445

72 64 50 45 100-125-150-175-200-250-300 1,83 SR445PI(PE)050 *
Speed 10 m/s 83 64 61 45 100-125-150-175-200-250-300 1,87 SR445PI(PE)061 *
97
103
64
64
75
81
45
45
100-125-150-175-200-250-300 2,05 SR445PI(PE)075
100-125-150-175-200-250-300 2,10 SR445PI(PE)081
*
*
technical dept. 117 64 95 45 100-125-150-175-200-250-300 2,23 SR445PI(PE)095 *
122 64 100 45 100-125-150-175-200-250-300 2,26 SR445PI(PE)100 *
129 64 107 45 100-125-150-175-200-250-300 2,31 SR445PI(PE)107 *
LS N
139 64 117 45 100-125-150-175-200-250-300 2,38 SR445PI(PE)117 *
LS
2 147 64 125 45 100-125-150-175-200-250-300 2,49 SR445PI(PE)125 *
R 158 64 136 45 100-125-150-175-200-250-300 2,60 SR445PI(PE)136 *
67 172 64 150 45 100-125-150-175-200-250-300 2,71 SR445PI(PE)150 *
M H
197 64 175 45 100-125-150-175-200-250-300 2,93 SR445PI(PE)175 *
222 64 200 45 100-125-150-175-200-250-300 3,17 SR445PI(PE)200 *
233 64 211 45 100-125-150-175-200-250-300 3,26 SR445PI(PE)211 *
Length of chain (L) 247 64 225 45 100-125-150-175-200-250-300 3,39 SR445PI(PE)225 *
274 64 252 45 100-125-150-175-200-250-300 3,64 SR445PI(PE)252 *
2 283 64 261 45 100-125-150-175-200-250-300 3,71 SR445PI(PE)261 *
plus length of curve (M) 334 64 312 45 100-125-150-175-200-250-300 4,13 SR445PI(PE)312 *
356 64 334 45 100-125-150-175-200-250-300 4,35 SR445PI(PE)334 *
L= LS + M 384 64 362 45 100-125-150-175-200-250-300 4,59 SR445PI(PE)362 *
2
*Complete the code by inserting the value of the radius (R): Ex. SR445PI(PE)050 2 0 0
R H N M
mm mm mm mm
100 264 200 450
125 314 225 530
150 364 250 605
175 414 275 685
200 464 300 765
250 564 350 920
300 664 400 1080
116
®

2
)
SR445PI
Type* SR445PE
30
20
15
10
8
6
5
4
3
2
1,5
Fig. A
Fig. B
3
0 1 2 3 4
L 81 L 137 On request available with
LS Max unsupported length 19,5 covers on only internal radius
2
25 or external radius.
LS 20 10 19,5
ø6.5 10 35 10
LS
2
6,5 12
F F

difference of weight between SR445PI(PE)050 63 SR445PI(PE)050 28
SR445PI(PE)061 74 SR445PI(PE)061 39
various widths of chain. SR445PI(PE)075 88 SR445PI(PE)075 53
SR445PI(PE)081 94 SR445PI(PE)081 59
SR445PI(PE)095 108 SR445PI(PE)095 73
SR445PI(PE)100 113 SR445PI(PE)100 78
SR445PI(PE)107 120 SR445PI(PE)107 85
SR445PI(PE)117 130 SR445PI(PE)117 95
SR445PI(PE)125 138 SR445PI(PE)125 103
SR445PI(PE)136 149 SR445PI(PE)136 114
and weights not included in SR445PI(PE)150 163 SR445PI(PE)150 128
the area of the diagram SR445PI(PE)175 188 SR445PI(PE)175 153 How to open the cover.
SR445PI(PE)200 213 SR445PI(PE)200 178
showing self-supporting SR445PI(PE)211 224 SR445PI(PE)211 189
SR445PI(PE)225 238 SR445PI(PE)225 203
capacity, verify the possible SR445PI(PE)252 265 SR445PI(PE)252 230
SR445PI(PE)261 274 SR445PI(PE)261 239
use of support rollers (see SR445PI(PE)312 325 SR445PI(PE)312 290
page 30). SR445PI(PE)334 347 SR445PI(PE)334 312
SR445PI(PE)362 375 SR445PI(PE)362 340 Protection version

Type Set Type Set
SR445... AN445P *KM SR445... A445P KM **
Complete Set Unassembled Complete Set Unassembled Protection version
Chain End Brackets Chain End Brackets see page 118
Type Set Type Set
SR445... AN445P *K SR445... A445P K **
* Complete the code by inserting the *Available on request in stainless steel
value of the quote C. ** 1=Pos.1; 2=Pos.2; 3=Pos.3
page 31.
117
SR445AI/SR445AE
with openable aluminium covers
(SR445AI ) or from outer radius Separator
(SR445AE). - Unassembled Part.no S445UF
Pin
C Part.no PG445

72 64 50 45 100-125-150-175-200-250-300 2,13 SR445AI(AE)050 *
Speed 10 m/s 83 64 61 45 100-125-150-175-200-250-300 2,24 SR445AI(AE)061 *
97
103
64
64
75
81
45
45
100-125-150-175-200-250-300 2,49 SR445AI(AE)075
100-125-150-175-200-250-300 2,59 SR445AI(AE)081
*
*
technical dept. 117 64 95 45 100-125-150-175-200-250-300 2,79 SR445AI(AE)095 *
122 64 100 45 100-125-150-175-200-250-300 2,85 SR445AI(AE)100 *
129 64 107 45 100-125-150-175-200-250-300 2,95 SR445AI(AE)107 *
LS N
139 64 117 45 100-125-150-175-200-250-300 3,08 SR445AI(AE)117 *
LS
2 147 64 125 45 100-125-150-175-200-250-300 3,24 SR445AI(AE)125 *
R 158 64 136 45 100-125-150-175-200-250-300 3,41 SR445AI(AE)136 *
67 172 64 150 45 100-125-150-175-200-250-300 3,61 SR445AI(AE)150 *
M H
197 64 175 45 100-125-150-175-200-250-300 3,97 SR445AI(AE)175 *
222 64 200 45 100-125-150-175-200-250-300 4,35 SR445AI(AE)200 *
233 64 211 45 100-125-150-175-200-250-300 4,51 SR445AI(AE)211 *
Length of chain (L) 247 64 225 45 100-125-150-175-200-250-300 4,73 SR445AI(AE)225 *
274 64 252 45 100-125-150-175-200-250-300 5,13 SR445AI(AE)252 *
2 283 64 261 45 100-125-150-175-200-250-300 5,26 SR445AI(AE)261 *
plus length of curve (M) 334 64 312 45 100-125-150-175-200-250-300 6,00 SR445AI(AE)312 *
356 64 334 45 100-125-150-175-200-250-300 6,33 SR445AI(AE)334 *
L= LS + M 384 64 362 45 100-125-150-175-200-250-300 6,73 SR445AI(AE)362 *
2
*Complete the code by inserting the value of the radius (R): Ex. SR445AI(AE)050 2 0 0
R H N M
mm mm mm mm
100 264 200 450
125 314 225 530
150 364 250 605
175 414 275 685
200 464 300 765
250 564 350 920
300 664 400 1080
118
®

2
)
SR445AI
Type* SR445AE
contained per linear metre. Chain with openable
aluminium covers
30
20
15
10
8
6
5
4
3
2
1,5
Fig. A
Fig. B
3
0 1 2 3 4
L 81 L 137
LS Max unsupported length 19,5
2
25
LS 20 10 19,5
ø6.5 10 35 10
LS
2
6,5 12
F F

difference of weight between SR445AI(AE)050 63 SR445AI(AE)050 28
SR445AI(AE)061 74 SR445AI(AE)061 39
various widths of chain. SR445AI(AE)075 88 SR445AI(AE)075 53
SR445AI(AE)081 94 SR445AI(AE)081 59
SR445AI(AE)095 108 SR445AI(AE)095 73
SR445AI(AE)100 113 SR445AI(AE)100 78
SR445AI(AE)107 120 SR445AI(AE)107 85
SR445AI(AE)117 130 SR445AI(AE)117 95
SR445AI(AE)125 138 SR445AI(AE)125 103
SR445AI(AE)136 149 SR445AI(AE)136 114
and weights not included in SR445AI(AE)150 163 SR445AI(AE)150 128
the area of the diagram SR445AI(AE)175 188 SR445AI(AE)175 153
SR445AI(AE)200 213 SR445AI(AE)200 178
showing self-supporting SR445AI(AE)211 224 SR445AI(AE)211 189
SR445AI(AE)225 238 SR445AI(AE)225 203
capacity, verify the possible SR445AI(AE)252 265 SR445AI(AE)252 230
SR445AI(AE)261 274 SR445AI(AE)261 239
use of support rollers (see SR445AI(AE)312 325 SR445AI(AE)312 290
page 30). SR445AI(AE)334 347 SR445AI(AE)334 312
SR445AI(AE)362 375 SR445AI(AE)362 340

Type Set Type Set
SR445... AN445A *KM SR445... A445A KM **
Type Set Type Set
SR445... AN445A *K SR445... A445A K **
* Complete the code by inserting the *Available on request in stainless steel
value of the quote C. ** 1=Pos.1; 2=Pos.2; 3=Pos.3
page 31. consult Brevetti Stendalto’s
Technical Office
119
SR475PI/SR475PE
(475PI ) or from outer radius (475PE). Separator
Vertical and horizontal modular - Unassembled Part.no S309S
separator system is available. 5 D B
Pin
C Part.no PG475

112 100,5 74 75,5 180-200-250-300-350-400 4,60 SR475PI(PE)074 *
Speed 8 m/s 132 100,5 94 75,5 180-200-250-300-350-400 4,80 SR475PI(PE)094 *
157
164
100,5
100,5
119
126
75,5
75,5
180-200-250-300-350-400
180-200-250-300-350-400
5,10 SR475PI(PE)119
5,15 SR475PI(PE)126
*
*
technical dept. 187 100,5 149 75,5 180-200-250-300-350-400 5,40 SR475PI(PE)149 *
227 100,5 189 75,5 180-200-250-300-350-400 5,80 SR475PI(PE)189 *
262 100,5 224 75,5 180-200-250-300-350-400 6,20 SR475PI(PE)224 *
LS N 288 100,5 250 75,5 180-200-250-300-350-400 6,50 SR475PI(PE)250 *
LS 312 100,5 274 75,5 180-200-250-300-350-400 6,75 SR475PI(PE)274 *
2
R 338 100,5 300 75,5 180-200-250-300-350-400 7,05 SR475PI(PE)300 *
362 100,5 324 75,5 180-200-250-300-350-400 7,30 SR475PI(PE)324 *
105 M H 388 100,5 350 75,5 180-200-250-300-350-400 7,55 SR475PI(PE)350 *
412 100,5 374 75,5 180-200-250-300-350-400 7,85 SR475PI(PE)374 *
536 100,5 498 75,5 180-200-250-300-350-400 9,20 SR475PI(PE)498 *
*Complete the code by inserting the value of the radius (R): Ex. SR475PI(PE)119 1 5 0
Length of chain (L)

Half travel distance ( LS ) R H N M
2 mm mm mm mm
180 460,5 335 775
L= LS + M 200 500,5 355 840
2 250 600,5 405 995
300 700,5 460 1155
350 800,5 505 1310
400 900,5 560 1470
120
®

2
)
two ends of the chain to SR475PI
SR475PE
40
30
20
15
10
8
6
5
4
3
2
1,5
Fig. A
Separation System
3
1 See end brackets mounting page. 176
0 1 2 3 4 5 6 7
variations page 31.
2 L 105
LS
LS
2 70
15 40 15
22
11
F A
difference of weight between Chain F
various widths of chain. Type mm
SR475PI(PE)074 35
SR475PI(PE)094 55
SR475PI(PE)119 80
For applications with LS2 SR475PI(PE)126 87
and weights not included in SR475PI(PE)149 110
the area of the diagram SR475PI(PE)189 150
SR475PI(PE)224 185
SR475PI(PE)250 211
capacity, verify the possible SR475PI(PE)274 235
use of support rollers (see SR475PI(PE)300 261
page 30). SR475PI(PE)324 285
SR475PI(PE)350 311
SR475PI(PE)374 335
SR475PI(PE)498 459

Type Part Numbers
Chain End Brackets
Type Set
SR475... A475P KM **
Chain End Brackets
Type Set
SR475... A475P K **
page 31.
121
SR660
A A
PG660
Inner height (D) 36 mm C C
Double share Sideband & Frame PG600
4 2,5 D B
single-pin. Covers are openable from D B
inner radius.
Min 18
Vertical separators are available.
Separator Separator
- Unassembled Part.no S660 - Unassembled Part.no S600
- Assembled Part.no S660MC - Assembled Part.no S600MC

79 55 50 36 100-150-200-250 1,90 SR660050 *
Speed 6 m/s 129 55 100 36 100-150-200-250 2,40 SR660100 *
179 55 150 36 100-150-200-250 3,00 SR60015 **
technical dept. **Complete the code by inserting the value of the radius (R): Ex. SR60015 1
Where: 0=100; 1=150; 2=200; 3=250
LS N R H N M
LS
2 mm mm mm mm
R
100 255 180 415
50 M H 150 355 230 575
200 455 280 730
250 555 330 885
Length of chain (L)

2
L= LS + M
2
122
®

2
)
SR660
in relationship to the weight Chain
of the cables and hoses with openable covers
15
13
10
9
8
7
6
5
4
3
3
2,5 Fig. A
2
1,5
1
0 0,5 1 1,5 2 2,5 3
59,5 L ø5.5
2
20
15
LS 20
LS
2 10 17
ø5.5

F
Chain F
For applications with LS2 Type mm
SR660 C=50 62
the area of the diagram SR660 C=100 112
showing self-supporting SR600 C=150 162
page 30).
Nylon Type
Part Numbers How to open the cover.

Chain End Brackets
Type Set
SR660 C=50 AN660050KM Special tool to remove the
SR660 C=100 AN660100KM connecting pivots:
SR600 C=150 AL600KM Part Number PZ010.

Chain End Brackets
Type Set
SR660 C=50 AN660050K
SR660 C=100 AN660100K
SR600 C=150 AL600K For further information please
Technical Office
123
SR770
A A
Inner height (D) 51 mm C PG770 C
Double share Sideband & Frame PG700
5 2,5 D B
single-pin. Covers are openable from D B
inner radius.
Min 18
Vertical separators are available.
Separator Separator
- Unassembled Part.no S770 - Unassembled Part.no S700
- Assembled Part.no S770MC - Assembled Part.no S700MC

120 78 85 51 150-200-250-300 3,30 SR770085 *
Speed 6 m/s 135 78 100 51 150-200-250-300 3,90 SR770100 *
185
235
78
78
150
200
51
51
150-200-250-300
150-200-250-300
4,10
4,50
SR770150
SR770200
*
*
technical dept. 285 78 250 51 150-200-250-300 5,00 SR70025 **
**Complete the code by inserting the value of the radius (R): Ex. SR70025 1
Where: 0=150; 1=200; 2=250; 3=300
R H N M
LS N
LS
mm mm mm mm
2 R 150 378 260 615
200 478 310 770
70 M H 250 578 365 930
300 678 410 1085
Length of chain (L)

2
L= LS + M
2
124
®

2
)
SR770
20
15
10
8
7
6
5
4
3,5
3
2,5
2
1,5
Fig. A
3
1
0 1 2 3 4
LS Max unsupported length 79 L ø6.2

2
26,5
25
LS
26,5
LS
2 15 20
ø6.2

F
Chain F
Type mm
For applications with LS2 SR770 C=85 100
and weights not included in SR770 C=100 115
the area of the diagram SR770 C=150 165
showing self-supporting SR770 C=200 215
capacity, verify the possible SR700 C=250 265
page 30).
Nylon Type

Chain End Brackets
Type Set
SR770... AN770 *KM Special tool to remove the
SR700 C=250 AL700KM connecting pivots:
Part Number PZ010.
Chain End Brackets
Type Set
SR770... AN770 *K
SR700 C=250 AL700K
Technical Office
125
SR306CI/SR306CE
A
triple-pin.
Covers are openable from inner radius Separator
(SR306CI ) or from outer radius - Unassembled Part.no S306SM
(SR306CE). 5 D B
- Assembled Part.no S306SMMC
Vertical separators are available. Pin
C Part.no PG307

79 55 43 37 107-150-200-250-300 1,85 SR306CI(CE)043 *
Speed 8 m/s 90 55 54 37 107-150-200-250-300 1,90 SR306CI(CE)054 *
104
110
55
55
68
74
37
37
107-150-200-250-300
107-150-200-250-300
2,04 SR306CI(CE)068
2,09 SR306CI(CE)074
*
*
technical dept. 124 55 88 37 107-150-200-250-300 2,20 SR306CI(CE)088 *
129 55 93 37 107-150-200-250-300 2,22 SR306CI(CE)093 *
136 55 100 37 107-150-200-250-300 2,27 SR306CI(CE)100 *
LS N 146 55 110 37 107-150-200-250-300 2,33 SR306CI(CE)110 *
LS 154 55 118 37 107-150-200-250-300 2,42 SR306CI(CE)118 *
2 R 165 55 129 37 107-150-200-250-300 2,50 SR306CI(CE)129 *
65
179 55 143 37 107-150-200-250-300 2,61 SR306CI(CE)143 *
M H 204 55 168 37 107-150-200-250-300 2,80 SR306CI(CE)168 *
229 55 193 37 107-150-200-250-300 3,00 SR306CI(CE)193 *
240 55 204 37 107-150-200-250-300 3,08 SR306CI(CE)204 *
Length of chain (L) 254 55 218 37 107-150-200-250-300 3,19 SR306CI(CE)218 *
281 55 245 37 107-150-200-250-300 3,40 SR306CI(CE)245 *
2 290 55 254 37 107-150-200-250-300 3,47 SR306CI(CE)254 *
plus length of curve (M) 341 55 305 37 107-150-200-250-300 3,84 SR306CI(CE)305 *
363 55 327 37 107-150-200-250-300 4,01 SR306CI(CE)327 *
L= LS + M 391 55 355 37 107-150-200-250-300 4,22 SR306CI(CE)355 *
2
*Complete the code by inserting the value of the radius (R): Ex. SR306CI(CE)110 1 5 0
R H N M
mm mm mm mm
107 269 205 470
150 355 245 605
200 455 295 760
250 555 345 920
300 655 395 1075
126
®

2
)
SR306CI
Type* SR306CE
aluminium covers
30
20
15
10
8
6
5
4
Fig. A Fig. B
3
2
1,5
variations page 31.
3
1
0 1 2 3 L 68 L 63.5
2 16.5
22
16.5
LS
20 12 102
LS
2 ø6.5 10 32 10
6.5 12
F A FA
assembled with nylon frames SR306CI(CE)043 61 SR306CI(CE)043 36
every second pitch. SR306CI(CE)054 72 SR306CI(CE)054 47
SR306CI(CE)068 86 SR306CI(CE)068 61
SR306CI(CE)074 92 SR306CI(CE)074 67
SR306CI(CE)088 106 SR306CI(CE)088 81
SR306CI(CE)093 111 SR306CI(CE)093 86
and weights not included in SR306CI(CE)100 118 SR306CI(CE)100 93
the area of the diagram SR306CI(CE)110 128 SR306CI(CE)110 103
SR306CI(CE)118 136 SR306CI(CE)118 111
showing self-supporting SR306CI(CE)129 147 SR306CI(CE)129 122
SR306CI(CE)143 161 SR306CI(CE)143 136
capacity, verify the possible SR306CI(CE)168 186 SR306CI(CE)168 161
SR306CI(CE)193 211 SR306CI(CE)193 186
use of support rollers (see SR306CI(CE)204 222 SR306CI(CE)204 197
page 30). SR306CI(CE)218 236 SR306CI(CE)218 211
SR306CI(CE)245 263 SR306CI(CE)245 238
SR306CI(CE)254 272 SR306CI(CE)254 247
SR306CI(CE)305 323 SR306CI(CE)305 298
SR306CI(CE)327 345 SR306CI(CE)327 320
SR306CI(CE)355 373 SR306CI(CE)355 348

Type Set Type Set
SR306 AN306C KM SR306 A306CU KM **
Type Set Type Set
SR306 AN306C K SR306 A306CU K ** For further information please
page 31. 127
SR308CI/SR308CE
A
triple-pin.
(SR308CI ) or from outer radius - Unassembled Part.no S308C
(SR308CE). 4 D B
- Assembled Part.no S308CMC
C Part.no PG308

82 75 38 57 150-180-200-230-280-400 2,90 SR308CI(CE)038 *
Speed 8 m/s 93 75 49 57 150-180-200-230-280-400 3,01 SR308CI(CE)049 *
107
113
75
75
63
69
57
57
150-180-200-230-280-400 3,19 SR308CI(CE)063
150-180-200-230-280-400 3,27 SR308CI(CE)069
*
*
technical dept. 127 75 83 57 150-180-200-230-280-400 3,43 SR308CI(CE)083 *
132 75 88 57 150-180-200-230-280-400 3,48 SR308CI(CE)088 *
139 75 95 57 150-180-200-230-280-400 3,56 SR308CI(CE)095 *
LS N 149 75 105 57 150-180-200-230-280-400 3,67 SR308CI(CE)105 *
LS 157 75 113 57 150-180-200-230-280-400 3,77 SR308CI(CE)113 *
2 R 168 75 124 57 150-180-200-230-280-400 3,91 SR308CI(CE)124 *
80
182 75 138 57 150-180-200-230-280-400 4,06 SR308CI(CE)138 *
M H 207 75 163 57 150-180-200-230-280-400 4,36 SR308CI(CE)163 *
232 75 188 57 150-180-200-230-280-400 4,65 SR308CI(CE)188 *
243 75 199 57 150-180-200-230-280-400 4,78 SR308CI(CE)199 *
Length of chain (L) 257 75 213 57 150-180-200-230-280-400 4,94 SR308CI(CE)213 *
284 75 240 57 150-180-200-230-280-400 5,25 SR308CI(CE)240 *
2 293 75 249 57 150-180-200-230-280-400 5,37 SR308CI(CE)249 *
plus length of curve (M) 344 75 300 57 150-180-200-230-280-400 5,95 SR308CI(CE)300 *
366 75 322 57 150-180-200-230-280-400 6,20 SR308CI(CE)322 *
L= LS + M 394 75 350 57 150-180-200-230-280-400 6,11 SR308CI(CE)350 *
2
*Complete the code by inserting the value of the radius (R): Ex. SR308CI(CE)105 1 8 0
R H N M
mm mm mm mm
150 375 270 635
180 435 300 725
200 475 320 790
230 535 350 885
280 635 400 1040
400 875 520 1420
128
®

2
)
SR308CI
Type* SR308CE
aluminium covers
40
30
20
15
10
8
6
5
Fig. A Fig. A
3
4
3 The chain can be fixed frontally, Chain fixed outside the radius. (Fig A)
2
1,5 variations page 31.
1
0 1 2 3 4 5
L 73 L 78.5
2 26,5
21
LS 26,5
LS 15 125
ø6
2 .5 10 45 10
8.5 15
FA F A
65
SR308CI(CE)063 87 SR308CI(CE)063 45
SR308CI(CE)069 93 SR308CI(CE)069 51
SR308CI(CE)083 107 SR308CI(CE)083 65
SR308CI(CE)088 112 SR308CI(CE)088 70
SR308CI(CE)113 137 SR308CI(CE)113 95
SR308CI(CE)138 162 SR308CI(CE)138 120
SR308CI(CE)188 212 SR308CI(CE)188 170
SR308CI(CE)240 264 SR308CI(CE)240 222
SR308CI(CE)249 273 SR308CI(CE)249 231
SR308CI(CE)300 324 SR308CI(CE)300 282
SR308CI(CE)322 346 SR308CI(CE)322 304
SR308CI(CE)350 374 SR308CI(CE)350 332

Type Set Type Set
Type Set Type Set
SR308 AN308C K SR308 A308CU K ** For further information please
page 31. 129
SR309C
Strong double share Sideband & A
anti-friction triple-pin.
Covers are openable from outer radius Separator
Vertical and horizontal separator - Unassembled Part.no S309PO
systems are available. D B
7 - Assembled Part.no S309POMC
Pin
C Part.no PG309

256 100 200 72 200-250-300-350-400-500 5,7 SR309C200 *
Speed 8 m/s 356 100 300 72 200-250-300-350-400-500 6,8 SR309C300 *
456 100 400 72 200-250-300-350-400-500 7,9 SR309C400
*Complete the code by inserting the value of the radius (R): Ex. SR309C200 2 0 0
*
technical dept.
LS N R H N M
LS mm mm mm mm
2 R 200 500 350 830
250 600 400 985
100 M H 300 700 455 1145
350 800 500 1300
400 900 555 1460
Length of chain (L) 500 1100 650 1770

2
L= LS + M
2
130
®

2
)
SR309C
40
30
20
15
10
8
6
5
4
3
2
1,5
3
1
Fig. A
0 1 2 3 4 5 6 7 The chain can be fixed frontally,
LS Max unsupported length inner or outer radius. (Fig A)
2
L 140
LS
LS 27
2 46
27
50 25,5
ø10.5
ø10.5
difference of weight between F A
Chain F
For applications with LS2 Type mm
SR309C200 229
the area of the diagram SR309C300 329
showing self-supporting SR309C400 429
page 30).
Nylon Type

Chain End Brackets
Type Set
SR309C200 AN309C200KM
SR309C300 AN309C300KM
SR309C400 AN309C400KM
Chain End Brackets
Type Set
SR309C200 AN309C200K
SR309C300 AN309C300K
SR309C400 AN309C400K For further information please
Technical Office
131
SR309CI/SR309CE
A
triple-pin.
(SR309CI ) or from outer radius - Unassembled Part.no S309S
(SR309CE). 5 D B
C Part.no PG309

120 100 64 75,5 200-250-300-350-400-500 4,84 SR309CI(CE)064 *
Speed 8 m/s 140 100 84 75,5 200-250-300-350-400-500 5,12 SR309CI(CE)084 *
165
172
100
100
109
116
75,5
75,5
200-250-300-350-400-500 5,47 SR309CI(CE)109
200-250-300-350-400-500 5,58 SR309CI(CE)116
*
*
technical dept. 195 100 139 75,5 200-250-300-350-400-500 5,90 SR309CI(CE)139 *
235 100 179 75,5 200-250-300-350-400-500 6,47 SR309CI(CE)179 *
270 100 214 75,5 200-250-300-350-400-500 6,97 SR309CI(CE)214 *
LS N 296 100 240 75,5 200-250-300-350-400-500 7,35 SR309CI(CE)240 *
LS 320 100 264 75,5 200-250-300-350-400-500 7,68 SR309CI(CE)264 *
2 R 346 100 290 75,5 200-250-300-350-400-500 8,04 SR309CI(CE)290 *
100 370 100 314 75,5 200-250-300-350-400-500 8,39 SR309CI(CE)314 *
M H
396 100 340 75,5 200-250-300-350-400-500 8,74 SR309CI(CE)340 *
420 100 364 75,5 200-250-300-350-400-500 9,09 SR309CI(CE)364 *
544 100 488 75,5 200-250-300-350-400-500 10,86 SR309CI(CE)488 *
Length of chain (L) *Complete the code by inserting the value of the radius (R): Ex. SR309CI(CE)116 2 5 0
2
R H N M
L= LS + M
2 mm mm mm mm
200 500 350 830
250 600 400 985
300 700 455 1145
350 800 500 1300
400 900 555 1460
500 1100 650 1770
132
®

2
)
SR309CI
Type* SR309CE
aluminium covers
40
30
20
15
10
8
6
5
Fig. A Fig. B
4
3
2
1,5
variations page 31.
3
1
0 1 2 3 4 5 6 7 L 140 L 100
2 27
46
27
LS
50 25,5
LS ø10.5
2 157
ø10.5 15 50 15
11 20
F A 80 FA
SR309CI(CE)109 137 SR309CI(CE)109 95
SR309CI(CE)116 144 SR309CI(CE)116 102
SR309CI(CE)179 207 SR309CI(CE)179 165
SR309CI(CE)340 368 SR309CI(CE)340 326
SR309CI(CE)364 392 SR309CI(CE)364 350
SR309CI(CE)488 516 SR309CI(CE)488 474

Type Set Type Set
Type Set Type Set
SR309 AN309C K SR309 A309CU K **
page 31.
133
Nylon Cable Chains
Sliding Series

Series SR319SE page 148
Series M60PI-M60PE page 156
Series M80PI-M80PE page 158
For Series SR326-SR328-M60 page 160
For Series SR475-SR478-SR319-M80 page 162

completely smooth
Special End Brackets on

moving end of chain
Triple connecting Pivot
Pin which offers high
integrity in high Nylon separator. Cables can be laid
performance applications apart from each other
Wide range of cross pieces

available in the following types:
Open and close, with a
“Snap-Fit” action
Aluminium Rods
With Pre-Drilled Holes
Integrated skids which

permit the chain to slide on
itself. No wearing thanks to
special polymers
135
SR326SI/SR326SE
Nylon Sliding Cable Chain
Strong double share Sideband & Separator
Frame construction with large A - Unassembled Part.no S660A
anti-friction triple-pin. The chain - Assembled Part.no S660AMC
incorporates large sliding-skid surfaces Strong-hold separator
to offer durability, even with high for C > 200 mm
speed/loads. Frames openable from Part.no S660AH
- Unassembled
inner radius (..SI) and outer radius 5 D B 3
(..SE). As standard the chain comes - Assembled Part.no S660AHMC
with frames every second link, on Pin
request with frames every link. Modular C S660AH Part.no PG307
separator systems are available.
A B C D R Weight/m Chain
Technical characteristics mm mm mm mm mm kg Part Number
106 59 61 37 107-150-200-250-300 1,33 SR326SI(SE)061 *
Speed 2 m/s 117 59 72 37 107-150-200-250-300 1,33 SR326SI(SE)072 *
131
137
59
59
86
92
37
37
107-150-200-250-300
107-150-200-250-300
1,40 SR326SI(SE)086
1,41 SR326SI(SE)092
*
*
technical dept. 151 59 106 37 107-150-200-250-300 1,46 SR326SI(SE)106 *
156 59 111 37 107-150-200-250-300 1,46 SR326SI(SE)111 *
163 59 118 37 107-150-200-250-300 1,48 SR326SI(SE)118 *
LS
173 59 128 37 107-150-200-250-300 1,49 SR326SI(SE)128 *
LS 181 59 136 37 107-150-200-250-300 1,54 SR326SI(SE)136 *
2
MOVING POINT
M R 192 59 147 37 107-150-200-250-300 1,57 SR326SI(SE)147 *
H 206 59 161 37 107-150-200-250-300 1,61 SR326SI(SE)161 *
200
231 59 186 37 107-150-200-250-300 1,68 SR326SI(SE)186 *
FIXED POINT 65 N
256 59 211 37 107-150-200-250-300 1,75 SR326SI(SE)211 *
267 59 222 37 107-150-200-250-300 1,79 SR326SI(SE)222 *
Length of chain (L) 281 59 236 37 107-150-200-250-300 1,83 SR326SI(SE)236 *
308 59 263 37 107-150-200-250-300 1,91 SR326SI(SE)263 *
2 317 59 272 37 107-150-200-250-300 1,93 SR326SI(SE)272 *
plus length of curve (M) 368 59 323 37 107-150-200-250-300 2,06 SR326SI(SE)323 *
390 59 345 37 107-150-200-250-300 2,10 SR326SI(SE)345 *
L= LS + M 418 59 373 37 107-150-200-250-300 2,21 SR326SI(SE)373 *
2
mm mm mm mm
107 273 290 650
150 359 440 1025
200 459 610 1460
250 559 785 1900
300 659 955 2340

®
End Brackets
The end brackets set allows the two ends of the chain to be
attached to the equipment. One set comprises two movable
end brackets to install at the moving point and two standard
SR326SI
steel end brackets to install at the fixed point.
Bright Zinc Plated Steel Bright Zinc Plated Steel
SR326SE
Nylon Sliding Cable
Movable Type* Type* Chain
(moving point) (fixed point) with openable frames
MOVING POINT
FIXED POINT
3
Fig. A
L 126 L 63,5
52
10 32 10 52
10 32 10
12
12
6,5 6,5
F F
30 30
Chain F
Type mm
SR326SI(SE)061 58
SR326SI(SE)072 69
SR326SI(SE)086 83
SR326SI(SE)092 89
SR326SI(SE)106 103
SR326SI(SE)111 108
SR326SI(SE)118 115
SR326SI(SE)128 125
SR326SI(SE)136 133
SR326SI(SE)147 144
SR326SI(SE)161 158
SR326SI(SE)186 183
SR326SI(SE)211 208
SR326SI(SE)222 219
SR326SI(SE)236 233
SR326SI(SE)263 260
SR326SI(SE)272 269 How to open the cover.
SR326SI(SE)323 320
SR326SI(SE)345 342
SR326SI(SE)373 370

Type Part Numbers Special tool to remove the
connecting pivots:
Complete Set Assembled Part Number PZ036.
Chain End Brackets
Type Set
SR326SI(SE)... A326KM
Chain End Brackets
Type Set
SR326SI(SE)... A326K
*Available on request in stainless steel Technical Office
137
SR326B
anti-friction triple-pin. The chain
incorporates large sliding-skid surfaces A
to offer durability, even with high C Separator
speed/loads. The Alu-rod frames are - Unassembled Part.no S2000F
un-screwable from inner and outer
radius. As standard the chain comes - Assembled Part.no S2000FMC
4 D B
request with frames every link. Part.no PG307
Separator systems are available.
115 59 75 30 107-150-200-250-300 1,75 SR326B075 *
Speed 2 m/s 140 59 100 30 107-150-200-250-300 1,80 SR326B100 *
190
240
59
59
150
200
30
30
107-150-200-250-300
107-150-200-250-300
1,90 SR326B150
2,05 SR326B200
*
*
technical dept. 290 59 250 30 107-150-200-250-300 2,15 SR326B250 *
340 59 300 30 107-150-200-250-300 2,25 SR326B300 *
C+40 59 ..... 30 107-150-200-250-300 SR326B **
*Complete the code by inserting the value of the radius (R): Ex. SR326B100 1 5 0
**Complete the code by inserting the value of the quote C and the radius (R): Ex. SR326B 1 2 3 1 5 0
Ex. SR326B100150 D
R H N M
LS mm mm mm mm
LS
2
M R
107 273 290 650
MOVING POINT
150 359 440 1025
H
200 200 459 610 1460
FIXED POINT 65 N 250 559 785 1900
300 659 950 2340
Length of chain (L)
2
L= LS + M
2

®
End Brackets
SR326B
Nylon Sliding Cable
steel end brackets to install at the fixed point. Chain
Bright Zinc Plated Steel Bright Zinc Plated Steel with un-screwable
aluminium rods
Movable Type* Type*
(moving point) (fixed point)
MOVING POINT
FIXED POINT
3
Fig. A
L 126 L 63,5
52
10 32 10 52
10 32 10
12
12
6,5 6,5
F F
30 30
separators.
Chain F
Type mm
SR326B075 67
SR326B100 92
SR326B150 142
SR326B200 192
SR326B250 242
SR326B300 292
Special dimension F=A-48

Type Part Numbers
Complete Set Assembled Special tool to remove the
Chain End Brackets connecting pivots:
Type Set Part Number PZ036.
SR326B... A326KM
Chain End Brackets
Type Set
SR326B... A326K
* Available on request in stainless steel
Technical Office
139
SR326F
A
combinations.The chain incorporates
ø ø ø ø ø
large sliding-skid surfaces to offer
durability even, with high speed/loads.
As standard the chain comes with B Pin
frames every link.
Part.no PG307
A B N. Ø R Weight/m Chain
Technical characteristics mm mm holes mm mm kg Part Number
89 59 2 22 107-150-200-250-300 1,95 SR326001 *
Speed 2 m/s 155 59 6 17 107-150-200-250-300 2,20 SR326002 *
193
214
59
59
6+2 17+20
6 25
107-150-200-250-300
107-150-200-250-300
2,45
2,70
SR326003
SR326004
*
*
technical dept. 113 59 3 23 107-150-200-250-300 2,10 SR326005 *
R H N M
LS mm mm mm mm
LS
2
M R
107 273 290 650
MOVING POINT
150 359 440 1025
H
200 200 459 610 1460
FIXED POINT 65 N 250 559 785 1900
300 659 955 2340
Length of chain (L)
2
L= LS + M
2
140
®
End Brackets
SR326F
Nylon Sliding Cable
nylon split cross
Movable Type* Type* pieces with holes
MOVING POINT
FIXED POINT
3
Fig. A
L 126 L 63,5
52
10 32 10 52
10 32 10
12
12
6,5 6,5
F F
30 30
Chain F
Type mm
SR326001 41
SR326002 107
SR326003 145
SR326004 166
SR326005 65

Type Part Numbers
Chain End Brackets Special tool to remove the
Type Set connecting pivots:
Part Number PZ036.
SR32600... A326KM
Chain End Brackets
Type Set
SR32600... A326K
Technical Office
141
SR328SI/SR328SE
Frame construction with large A - Unassembled Part.no S308C
anti-friction triple-pin. The chain - Assembled Part.no S308CMC
speed/loads. Frames openable from Part.no S308SHF
- Unassembled
inner radius (..SI) and outer radius 4 D B 5
(..SE). As standard the chain comes - Assembled Part.no S308SHFMC
request with frames every link. Modular C S308SH Part.no PG328TP
separator systems are available.
119 79 61 57 150-180-200-230-280-400 2,70 SR328SI(SE)061 *
Speed 3,5 m/s 130 79 72 57 150-180-200-230-280-400 2,73 SR328SI(SE)072 *
144
150
79
79
86
92
57
57
150-180-200-230-280-400 2,76 SR328SI(SE)086
150-180-200-230-280-400 2,78 SR328SI(SE)092
*
*
169 79 111 57 150-180-200-230-280-400 2,82 SR328SI(SE)111 *
176 79 118 57 150-180-200-230-280-400 2,82 SR328SI(SE)118 *
LS
186 79 128 57 150-180-200-230-280-400 2,86 SR328SI(SE)128 *
LS 194 79 136 57 150-180-200-230-280-400 2,89 SR328SI(SE)136 *
2
MOVING POINT
M R 205 79 147 57 150-180-200-230-280-400 2,89 SR328SI(SE)147 *
H 219 79 161 57 150-180-200-230-280-400 2,94 SR328SI(SE)161 *
250
244 79 186 57 150-180-200-230-280-400 3,01 SR328SI(SE)186 *
FIXED POINT 80 N
269 79 211 57 150-180-200-230-280-400 3,06 SR328SI(SE)211 *
280 79 222 57 150-180-200-230-280-400 3,08 SR328SI(SE)222 *
321 79 263 57 150-180-200-230-280-400 3,20 SR328SI(SE)263 *
2 330 79 272 57 150-180-200-230-280-400 3,20 SR328SI(SE)272 *
403 79 345 57 150-180-200-230-280-400 3,36 SR328SI(SE)345 *
L= LS + M 431 79 373 57 150-180-200-230-280-400 3,49 SR328SI(SE)373 *
2
mm mm mm mm
150 375 425 955
180 435 530 1220
200 475 600 1395
230 535 700 1655
280 635 875 2095
400 875 1285 3145

®
End Brackets
SR328SI
SR328SE
Nylon Sliding Cable
Movable Type* Type* Chain
(moving point) (fixed point) with openable frames
MOVING POINT
FIXED POINT
3
Fig. A
L 156 L 78.5
65 65
10 45 10 10 45 10
15
15
8.5 8.5
F F
43 43
Chain F
Type mm
SR328SI(SE)061 44
SR328SI(SE)072 55
SR328SI(SE)086 69
SR328SI(SE)092 75
SR328SI(SE)106 89
SR328SI(SE)111 94
SR328SI(SE)118 101
SR328SI(SE)128 111
SR328SI(SE)136 119
SR328SI(SE)147 130
SR328SI(SE)161 144
SR328SI(SE)186 169
SR328SI(SE)211 194
SR328SI(SE)222 205
SR328SI(SE)236 219
SR328SI(SE)263 246
SR328SI(SE)272 255 How to open the cover.
SR328SI(SE)323 306
SR328SI(SE)345 328
SR328SI(SE)373 356

Type Part Numbers Special tool to remove the
connecting pivots:
Complete Set Assembled Part Number PZ038.
Chain End Brackets
Type Set
SR328SI(SE)... A328KM
Chain End Brackets
Type Set
SR328SI(SE)... A328K
143
SR328B
anti-friction triple-pin. The chain
incorporates large sliding-skid surfaces A
to offer durability, even with high C Separator
speed/loads. The Alu-rod frames are - Unassembled Part.no S3000F
radius. As standard the chain comes - Assembled Part.no S3000FMC
5 D B
request with frames every link. Part.no PG328TP
162 79 100 48 150-180-200-230-280-400 2,50 SR328B100 *
Speed 3,5 m/s 212 79 150 48 150-180-200-230-280-400 2,60 SR328B150 *
262
312
79
79
200
250
48
48
150-180-200-230-280-400
150-180-200-230-280-400
2,75 SR328B200
2,90 SR328B250
*
*
C+62 79 ..... 48 150-180-200-230-280-400 SR328B **
*Complete the code by inserting the value of the radius (R): Ex. SR328B100 1 5 0
**Complete the code by inserting the value of the quote C and the radius (R): Ex. SR328B 1 2 3 1 5 0
Ex. SR328B100150 D
R H N M
LS mm mm mm mm
LS
2
M R
150 375 425 955
MOVING POINT
180 435 530 1220
H
250 200 475 600 1395
FIXED POINT 80 N 230 535 700 1655
280 635 875 2095
Length of chain (L) 400 875 1285 3145

2
L= LS + M
2

®
End Brackets
SR328B
Nylon Sliding Cable
aluminium rods
Movable Type* Type*
MOVING POINT
FIXED POINT
3
Fig. A
L 156 L 78.5
65 65
10 45 10 10 45 10
15
15
8.5 8.5
F F
43 43
separators.
Chain F
Type mm
SR328B100 87
SR328B150 137
SR328B200 187
SR328B250 237
SR328B300 287

Type Part Numbers
Part Number PZ038.
SR328B... A328KM
Chain End Brackets
Type Set
SR328B... A328K
Technical Office
145
SR328F
Nylon Cable Chain
cross pieces with different hole A
combinations.The chain incorporates ø ø ø ø ø ø
large sliding-skid surfaces to offer
durability even, with high speed/loads.
As standard the chain comes with B
Pin
frames every link.
Part.no PG328TP
A B N. Ø R Weight/m Chain
Technical characteristics mm mm holes mm mm kg Part Number
139 79 2 34 150-180-200-230-280-400 2,50 SR328001 *
Speed 3,5 m/s 227 79 6 25 150-180-200-230-280-400 2,85 SR328002 *
254
292
79
79
5
6
34
34
150-180-200-230-280-400
150-180-200-230-280-400
3,00
3,10
SR328003
SR328004
*
*
technical dept. 139 79 2+1 28-23 150-180-200-230-280-400 2,50 SR328005 *
R H N M
LS mm mm mm mm
LS
2
M R
150 375 425 955
MOVING POINT
180 435 530 1220
H
250 200 475 600 1395
FIXED POINT 80 N 230 535 700 1655
280 635 875 2095
Length of chain (L) 400 875 1285 3145

2
L= LS + M
2
146
®
End Brackets
SR328F
Nylon Sliding Cable
nylon split cross
Movable Type* Type* pieces with holes
MOVING POINT
FIXED POINT
3
Fig. A
L 156 L 78.5
65 65
10 45 10 10 45 10
15
15
8.5 8.5
F F
43 43
Chain F
Type mm
SR328001 64
SR328002 152
SR328003 179
SR328004 217
SR328005 64

Type Part Numbers
Part Number PZ038.
SR32800... A328KM
Chain End Brackets
Type Set
SR32800... A328K
Technical Office
147
SR319SE
Frame construction with large A - Unassembled Part.no S309S
anti-friction triple-pin. The chain - Assembled Part.no S309SMC
speed/loads. Frames openable from Part.no S309SH
6 - Unassembled
outer radius). As standard the chain 5 D B
comes with frames every second link, - Assembled Part.no S309SHMC
on request with frames every link. Pin
Modular separator systems are C S309SH Part.no PG319
available
128 107 64 75,5 200-250-300-350-400-500 4,47 SR319SE064 *
Speed 4 m/s 148 107 84 75,5 200-250-300-350-400-500 4,53 SR319SE084 *
173
180
107
107
109
116
75,5
75,5
200-250-300-350-400-500 4,61
200-250-300-350-400-500 4,64
SR319SE109
SR319SE116
*
*
technical dept. 203 107 139 75,5 200-250-300-350-400-500 4,71 SR319SE139 *
243 107 179 75,5 200-250-300-350-400-500 4,84 SR319SE179 *
278 107 214 75,5 200-250-300-350-400-500 4,95 SR319SE214 *
304 107 240 75,5 200-250-300-350-400-500 5,04 SR319SE240 *
LS 328 107 264 75,5 200-250-300-350-400-500 5,11 SR319SE264 *
LS
2
M R
354 107 290 75,5 200-250-300-350-400-500 5,19 SR319SE290 *
MOVING POINT
378 107 314 75,5 200-250-300-350-400-500 5,27 SR319SE314 *
H
300 404 107 340 75,5 200-250-300-350-400-500 5,34 SR319SE340 *
FIXED POINT 100 N 428 107 364 75,5 200-250-300-350-400-500 5,43 SR319SE364 *
552 107 488 75,5 200-250-300-350-400-500 5,85 SR319SE488 *
*Complete the code by inserting the value of the radius (R): Ex. SR319SE116 2 5 0
Length of chain (L) Ex. SR319SE116250 D
Half travel distance ( LS ) R H N M
2
plus length of curve (M) mm mm mm mm
200 507 595 1345
L= LS + M 250 607 765 1780
2 300 707 940 2220
350 807 1110 2655
400 907 1280 3095
500 1107 1625 3970

®
End Brackets
SR319SE
Nylon Sliding Cable
Bright Zinc Plated Steel Bright Zinc Plated Steel with openable frames
Movable Type* Type*
MOVING POINT
FIXED POINT
Separation System
3
Fig. A page. 176
L 200 L 100
80 80
15 50 15 15 50 15
22 11 22
11
F F
50 50
Chain F
Type mm
SR319SE064 40
SR319SE084 60
SR319SE109 85
SR319SE116 92 How to open the cover.
SR319SE139 115
SR319SE179 155
SR319SE214 190
SR319SE240 216
SR319SE264 240
SR319SE290 266
SR319SE314 290
SR319SE340 316
SR319SE364 340
SR319SE488 464
Type Part Numbers
Chain End Brackets
Type Set
SR319SE... A319KM
Chain End Brackets
Type Set For further information please
SR319SE... A319K consult Brevetti Stendalto’s
149
SR319B
anti-friction triple-pin. The chain A
incorporates large sliding-skid surfaces C
to offer durability, even with high Separator
speed/loads. The Alu-rod frames are - Unassembled Part.no S309C
radius. As standard the chain comes D B - Assembled Part.no S309CMC
10
request with frames every link. Part.no PG319
164 107 100 70 200-250-300-350-400-500 4,25 SR319PSB100 *
Speed 4 m/s 214 107 150 70 200-250-300-350-400-500 4,45 SR319PSB150 *
264
314
107
107
200
250
70
70
200-250-300-350-400-500
200-250-300-350-400-500
4,60
4,75
SR319PSB200 *
SR319PSB250 *
technical dept. 364 107 300 70 200-250-300-350-400-500 4,90 SR319PSB300 *
464 107 400 70 200-250-300-350-400-500 5,25 SR319PSB400 *
C+64 107 ..... 70 200-250-300-350-400-500 SR319PSB **
*Complete the code by inserting the value of the radius (R): Ex. SR319PSB150 2
Where: 2=200; 3=250; 4=300; 5=350; 6=400; 7=500
**Complete the code by inserting the value of the quote C and the radius (R): Ex. SR319PSB 1 2 3 2
Ex. SR319PSB1502 D
R H N M
LS mm mm mm mm
LS
2
M R
200 507 595 1345
MOVING POINT
250 607 765 1780
H
300 300 707 940 2220
FIXED POINT 100 N 350 807 1110 2655
400 907 1280 3095
Length of chain (L) 500 1107 1625 3970

2
L= LS + M
2

®
End Brackets
SR319B
Nylon Sliding Cable
aluminium rods
Movable Type* Type*
MOVING POINT
FIXED POINT
3
Fig. A
L 200 L 100
80 80
15 50 15 15 50 15
22
11 22
11
F F Supplementary movable
separators.
53 53
Chain F Version with aluminium

Type mm draw plates
SR319PSB100 76
SR319PSB150 126
SR319PSB200 176
SR319PSB250 226
SR319PSB300 276
SR319PSB400 376
On request available with

aluminium draw plates
Bright Zinc Plated Steel Example Part Number:
Type Part Numbers SR319T * **

Chain End Brackets * Inner width (C)
** Bending radius (R)
Type Set
SR319PSB... A319KM
Chain End Brackets
Type Set
SR319PSB... A319K
Technical Office
151
SR478MI/SR478ME
Nylon Cable Chain
Separator
(..MI ) or from outer radius (..ME). As
for C > 250 mm
standard the chain comes with frames Part.no S309SH
5 6 - Unassembled
every second link, on request with fra- D B
mes every link. Modular separator Pin
systems are available
Technical characteristics mm mm mm mm mm kg Part number
112 106,5 74 75,5 180-200-250-300-350-400 3,70 SR478MI(ME)074 *
Speed 3 m/s 132 106,5 94 75,5 180-200-250-300-350-400 3,80 SR478MI(ME)094 *
157
164
106,5
106,5
119
126
75,5
75,5
180-200-250-300-350-400
180-200-250-300-350-400
3,85 SR478MI(ME)119
3,90 SR478MI(ME)126
*
*
technical dept. 187 106,5 149 75,5 180-200-250-300-350-400 3,95 SR478MI(ME)149 *
227 106,5 189 75,5 180-200-250-300-350-400 4,05 SR478MI(ME)189 *
262 106,5 224 75,5 180-200-250-300-350-400 4,15 SR478MI(ME)224 *
288 106,5 250 75,5 180-200-250-300-350-400 4,25 SR478MI(ME)250 *
312 106,5 274 75,5 180-200-250-300-350-400 4,30 SR478MI(ME)274 *
LS
338 106,5 300 75,5 180-200-250-300-350-400 4,37 SR478MI(ME)300 *
MOVING POINT LS
2 362 106,5 324 75,5 180-200-250-300-350-400 4,45 SR478MI(ME)324 *
M R
388 106,5 350 75,5 180-200-250-300-350-400 4,55 SR478MI(ME)350 *
H 412 106,5 374 75,5 180-200-250-300-350-400 4,60 SR478MI(ME)374 *
300
536 106,5 498 75,5 180-200-250-300-350-400 5,00 SR478MI(ME)498 *
105
FIXED POINT N *Complete the code by inserting the value of the radius (R): Ex. SR478MI(ME)119 1 5 0
SR478MI(ME)119150 D
Length of chain (L) R H N M

mm mm mm mm
2 180 466,5 420 960
plus length of curve (M) 200 506,5 495 1135
250 606,5 670 1570
L= LS + M 300 706,5 845 2010
2
350 806,5 1015 2445
400 906,5 1190 2885

®
End Brackets
SR478MI
SR478ME
Nylon Cable Chain
Movable Type* Type* (moving point) with openable frames
(fixed point)
MOVING POINT
FIXED POINT
Separation System
3
Fig. A page. 176
L 105 L 105
70 70
15 40 15 15 40 15
22 22
11 11
F A F A
40 40
Chain F
Type mm
SR478MI(ME)074 35
SR478MI(ME)094 55 How to open the cover.
SR478MI(ME)119 80
SR478MI(ME)126 87
SR478MI(ME)149 110
SR478MI(ME)189 150
SR478MI(ME)224 185
SR478MI(ME)250 211
SR478MI(ME)274 235
SR478MI(ME)300 261
SR478MI(ME)324 285
SR478MI(ME)350 311
SR478MI(ME)374 335
SR478MI(ME)498 459

Type Part Numbers
Chain End Brackets
Type Set
SR478MI/ME A478M *KM
Chain End Brackets
Type Set
SR478MI/ME... A478M *K
Tiewrap Clamp
Part Number
Assembled CFC478 *KM For further information please
Unassembled CFC478 *K consult Brevetti Stendalto’s
153
SR478PI/SR478PE
Nylon Cable Chain
(478PI ) or from outer radius (478PE). Separator
Vertical and horizontal modular - Unassembled Part.no S309S
separator system are available. 5 D B
Pin
C Part.no PG475
112 106,5 74 75,5 180-200-250-300-350-400 4,60 SR478PI(PE)074 *
Speed 3 m/s 132 106,5 94 75,5 180-200-250-300-350-400 4,80 SR478PI(PE)094 *
157
164
106,5
106,5
119
126
75,5
75,5
180-200-250-300-350-400
180-200-250-300-350-400
5,10 SR478PI(PE)119
5,15 SR478PI(PE)126
*
*
technical dept. 187 106,5 149 75,5 180-200-250-300-350-400 5,40 SR478PI(PE)149 *
227 106,5 189 75,5 180-200-250-300-350-400 5,80 SR478PI(PE)189 *
262 106,5 224 75,5 180-200-250-300-350-400 6,20 SR478PI(PE)224 *
288 106,5 250 75,5 180-200-250-300-350-400 6,50 SR478PI(PE)250 *
312 106,5 274 75,5 180-200-250-300-350-400 6,75 SR478PI(PE)274 *
LS
338 106,5 300 75,5 180-200-250-300-350-400 7,05 SR478PI(PE)300 *
MOVING POINT LS
2 362 106,5 324 75,5 180-200-250-300-350-400 7,30 SR478PI(PE)324 *
M R
388 106,5 350 75,5 180-200-250-300-350-400 7,55 SR478PI(PE)350 *
H 412 106,5 374 75,5 180-200-250-300-350-400 7,85 SR478PI(PE)374 *
300
536 106,5 498 75,5 180-200-250-300-350-400 9,20 SR478PI(PE)498 *
105
FIXED POINT N *Complete the code by inserting the value of the radius (R): Ex. SR478PI(PE)119 1 5 0
Length of chain (L) R H N M

mm mm mm mm
2 180 466,5 420 960
plus length of curve (M) 200 506,5 495 1135
250 606,5 670 1570
L= LS + M 300 706,5 845 2010
2
350 806,5 1015 2445
400 906,5 1190 2885
154
®
End Brackets
SR478PI
SR478PE
Nylon Cable Chain
(fixed point)
MOVING POINT
FIXED POINT
Separation System
3
Fig. A page. 176
L 105 L 105
70 70
15 40 15 15 40 15
22 22
11 11
F A F A
40 40
Chain F
Type mm
SR478PI(PE)074 35
SR478PI(PE)094 55 How to open the cover.
SR478PI(PE)119 80
SR478PI(PE)126 87
SR478PI(PE)149 110
SR478PI(PE)189 150
SR478PI(PE)224 185
SR478PI(PE)250 211
SR478PI(PE)274 235
SR478PI(PE)300 261
SR478PI(PE)324 285
SR478PI(PE)350 311
SR478PI(PE)374 335
SR478PI(PE)498 459

Type Part Numbers
Chain End Brackets
Type Set
SR478PI/PE... A478P KM
Chain End Brackets
Type Set
SR478PI/PE... A478P K
Tiewrap Clamp
Codice
Assembled CFC478 *KM For further information please
UnassembledCFC478 *K consult Brevetti Stendalto’s
155
M60PIS/M60PES
Nylon Cable Chain
Sideband & Frame construction with Separator
large anti-friction single-pin. - Unassembled Part.no S60SM
A
Frames openable from inner radius - Assembled Part.no S60SMMC
(..PI) and outer radius (..PE). Strong-hold separator
As standard the chain comes with for C > 250 mm
frames every second link, on request Part.no S60HOFL
5 6 - Unassembled
with frames every link. D B
Vertical separators are available - Assembled Part.no S60HOFLMC
Pin
C Part.no PNE60S-PGI60S
169 96 115 60,5 200-250-300-400 5,37 M60PIS(PES)115 *
Speed 5 m/s 189 96 135 60,5 200-250-300-400 5,46 M60PIS(PES)135 *
214
221
96
96
160
167
60,5
60,5
200-250-300-400
200-250-300-400
5,52
5,54
M60PIS(PES)160
M60PIS(PES)167
*
*
technical dept. 244 96 190 60,5 200-250-300-400 5,61 M60PIS(PES)190 *
284 96 230 60,5 200-250-300-400 5,77 M60PIS(PES)230 *
319 96 265 60,5 200-250-300-400 5,91 M60PIS(PES)265 *
LS
345 96 291 60,5 200-250-300-400 5,99 M60PIS(PES)291 *
LS 369 96 315 60,5 200-250-300-400 6,07 M60PIS(PES)315 *
2
MOVING POINT M R 395 96 341 60,5 200-250-300-400 6,17 M60PIS(PES)341 *
H 419 96 365 60,5 200-250-300-400 6,26 M60PIS(PES)365 *
250
445 96 391 60,5 200-250-300-400 6,34 M60PIS(PES)391 *
FIXED POINT 90 N
469 96 415 60,5 200-250-300-400 6,43 M60PIS(PES)415 *
593 96 539 60,5 200-250-300-400 7,08 M60PIS(PES)539 *
Length of chain (L) *Complete the code by inserting the value of the radius (R): Ex. M60PIS(PES)115 2 5 0
Half travel distance ( LS ) M60PIS(PES)115250 D
2
L= LS + M
2
R H N M
mm mm mm mm
200 490 795 1760
250 590 1130 2505
300 690 1460 3245
400 890 2130 4730

®
End Brackets
M60PIS
M60PES
Nylon Cable Chain
(fixed point) MOVING POINT
FIXED POINT
3
Fig. A
L 115 L 118
20
18
89
49
65
20
10 45 10 8,5
18
8,5
F A+4
43
Chain F
Type mm
M60PIS(PES)115 95
M60PIS(PES)135 115
M60PIS(PES)160 140
M60PIS(PES)167 147 How to open the cover.
M60PIS(PES)190 170
M60PIS(PES)230 210
M60PIS(PES)265 245
M60PIS(PES)291 271
M60PIS(PES)315 295
M60PIS(PES)341 321
M60PIS(PES)365 345
M60PIS(PES)391 371
M60PIS(PES)415 395
M60PIS(PES)539 519

Type Part Numbers
Chain End Brackets
Type Set
M60PIS/PES... A60PKM
Chain End Brackets
M60PIS/PES... A60PK consult Brevetti Stendalto’s
157
M80PI/M80PE
Nylon Cable Chain
Sideband & Frame construction with Separator
large anti-friction single-pin. - Unassembled Part.no S80
A
Frames openable from inner radius - Assembled Part.no S80MC
(..PI) and outer radius (..PE). Strong-hold separator
As standard the chain comes with for C > 250 mm
frames every second link, on request Part.no S80HOL
8 6 - Unassembled
with frames every link. D B
Vertical separators are available - Assembled Part.no S80HOLMC
Pin
C Part.no PGE80-PNI80
195 117 115 80,5 200-250-300-400-500-700 8,60 M80PI(PE)115 *
Speed 5 m/s 215 117 135 80,5 200-250-300-400-500-700 8,67 M80PI(PE)135 *
240
247
117
117
160
167
80,5
80,5
200-250-300-400-500-700
200-250-300-400-500-700
8,73 M80PI(PE)160
8,75 M80PI(PE)167
*
*
technical dept. 270 117 190 80,5 200-250-300-400-500-700 8,80 M80PI(PE)190 *
310 117 230 80,5 200-250-300-400-500-700 8,93 M80PI(PE)230 *
345 117 265 80,5 200-250-300-400-500-700 9,05 M80PI(PE)265 *
371 117 291 80,5 200-250-300-400-500-700 9,11 M80PI(PE)291 *
LS
LS 395 117 315 80,5 200-250-300-400-500-700 9,17 M80PI(PE)315 *
2
MOVING POINT
M R 421 117 341 80,5 200-250-300-400-500-700 9,25 M80PI(PE)341 *
H 445 117 365 80,5 200-250-300-400-500-700 9,33 M80PI(PE)365 *
300
471 117 391 80,5 200-250-300-400-500-700 9,40 M80PI(PE)391 *
FIXED POINT 110 N
495 117 415 80,5 200-250-300-400-500-700 9,47 M80PI(PE)415 *
619 117 539 80,5 200-250-300-400-500-700 10,00 M80PI(PE)539 *
Length of chain (L) *Complete the code by inserting the value of the radius (R): Ex. M80PI(PE)115 2 5 0
Half travel distance ( LS ) M80PI(PE)115250 D
2
L= LS + M
2
R H N M
mm mm mm mm
200 517 790 1730
250 617 1120 2480
300 717 1460 3220
400 917 2120 4700
500 1117 2780 6180
700 1517 4120 9150

®
End Brackets
M80PI
M80PE
Nylon Cable Chain
(fixed point) MOVING POINT
FIXED POINT
3
Fig. A
L 145 L 130
20
70 15
100
80
11
15
20 40 20
21
11 F A+8
6
55
Chain F
Type mm
M80PI(PE)115 92
M80PI(PE)135 112
M80PI(PE)160 137
M80PI(PE)167 144 How to open the cover.
M80PI(PE)190 167
M80PI(PE)230 207
M80PI(PE)265 242
M80PI(PE)291 268
M80PI(PE)315 292
M80PI(PE)341 318
M80PI(PE)365 342
M80PI(PE)391 368
M80PI(PE)415 392
M80PI(PE)539 516

Type Part Numbers
Chain End Brackets
Type Set
M80PI/PE... A80PKM
Chain End Brackets
M80PI/PE... A80PK consult Brevetti Stendalto’s
159
Guide Channel
SR445-SR660A-SR770A-SR326-SR328
2000P-3000P-M60
Special guide channel allows the use of

LS
LS LS
2 2
R
A B 250 250 125
A B
3 GUIDE EMPTY SECTION GUIDE WITH NYLON ROLLERS

LS
LS LS
2 2
R
A A
A A
GUIDE EMPTY SECTION
Channel guide is available in assembling kit

composed by:
joining and support plates
fixing screws
base
sliding device (nylon wheel/steel or plastic plate)
2000
FIXING PLATE
SIDE WALL
JOINING AND
SUPPORT PLATE
BASE
160
®
Empty Guide Section

Section A-A
Part Number Chain H2 H1
CS326… mm mm
How to order SR445 160 64
A1 = A + 4 Chain part number SR326B100150 160 59
SR660A
Guide channel 160 59
part number CS326B100 SR326
H2
SR770A 160 79
SR328 160 79
20
25 x 10 M60 190 90
A2 = A + 87 2000P 160 59
3000P 190 81,5
Guide with Nylon Rollers

Section B-B
Part Number
3
CR326…
How to order
Chain part number SR326B100150
A1 = A + 4
Guide channel
part number CR326B100
H2
H1
20
25 x 10
A2 = A + 87
Guide with Steel Sliding Plate

Section B-B
Part Number
CA326…
How to order
Chain part number SR326B100150
A1 = A + 4
Guide channel
part number CA326B100
H2
H1
25 x 10
20
A2 = A + 87
Guide with Plastic Sliding Plate

Section B-B
Part Number
CP326…
How to order
A1 = A + 4 Chain part number SR326B100150
Guide channel
part number CP326B100
H2
H1
20
25 x 10
A2 = A + 87

Technical Office
161
Guide Channel
SR478-SR319-M80-3500P-3500CP-4000P
Special guide channel allows the use of
the chain for long travel distance

LS
LS LS
2 2
R
A B 250 250 125
A B
3 GUIDE EMPTY SECTION GUIDE WITH NYLON ROLLERS

LS
LS LS
2 2
R
A A
A A
GUIDE EMPTY SECTION
Channel guide is available in assembling kit

composed by:
joining and support plates
fixing screws
base
sliding device (nylon wheel/steel or plastic plate)
2000
FIXING PLATE
SIDE WALL
JOINING AND
SUPPORT PLATE
BASE
162
®
Empty Guide Section

Section A-A
Part Number Chain H2 H1
CS319… mm mm
How to order 250 107
A1 = A + 8 SR319
Chain part number SR319PSB100200 250 117
M80
Guide channel 250 107
part number CS319B100 3500P
H2
3500CP 250 107

4000 325 161,5
SR478 250 107
20
25 x 10
A2 = A + 91
Guide with Nylon Rollers

Section B-B
Part Number
3
CR319…
How to order
A1 = A + 8
Chain part number SR319PSB100200
Guide channel
part number CR319B100
H2
H1
25 x 10
20
A2 = A + 91
Guide with Steel Sliding Plate

Section B-B
Part Number
CA319…
How to order
A1 = A + 8
Guide channel
part number CA319B100
H2
H1
20
25 x 10
A2 = A + 91
Guide with Plastic Sliding Plate

Section B-B
Part Number
CP319…
A1 = A + 8 How to order
Guide channel
part number CP319B100
H2
H1
20
25 x 10
A2 = A + 91

Technical Office
163
Nylon Cable Chains
Robot Series

Series SR510TN page 170
Series SR515TN page 170
Quickly removable
covers for easy
installation of the
cables/hoses
Internal separations
for the subdivisions of
the cables/hoses
Double pin; high strength
in every condition
Support guide for a correct

functioning of the chain
Inner surface without edges
Special end brackets

will ensure a perfect
fitting of the chain
165
SR495
Circular Nylon Cable Chain
A
Inner height (D) 35 mm C
single-pin. D B
Frames removable from inner radius.
0
ø2
Pin
Part.no PG305
A B C D R Weight/pitch Chain
69 45 45 35 100 0,100 SR495
Speed 180°/s
3 Acceleration 180°/s2
For higher requirements please consult our R Di De
De
technical dept. mm mm mm
Di 100 600 755
R Length of Chain
Chain Degrees No
Part Numbers of Rotation of Pitches
SR495 90 13
SR495 180 18
SR495 270 22
SR495 360 26
166
®
Steel End Brackets Support Guide

The end brackets set, containing two steel For correct functioning of the chain it is
plates screwed to the links, allows the two
ends of the chain to be attached to the
necessary that the installation is done in a
specific position.
SR495
Circular Nylon Cable
equipment. The end brackets are installed For this reason Brevetti Stendalto has Chain
in one position offering the possibility of observed and created a support guide which with removable
attaching the chain externally. (Fig. A) can do this. (Fig. B) frames
For particular applications it is possible to
create support guides with attachment plates
and special dimensions.
220˚
3
335
5
6.
00
ø
R3
5
33
R
85
R3
25
2.5
R 28
ø6
45 5
R 305
30
.5
76
R3
4
R 345 100
SUP495
Fig. A Fig. B
For applications with rotations exceeding

Steel End Brackets Part Numbers 200° it is necessary to use the appropriate
accessories for supporting the cable chain.
Complete Set Assembled (see page 28).
Chain End Brackets
Type Set
SR495... A495KM
Chain End Brackets
Type Set
SR495... A495K

Technical Office
167
SR500
Inner height (D) 30 mm A
Double share Sideband & Frame C
single-pin.
Frames removable from inner radius. D B Separator
4
MIN 10 - Assembled Part.no S500MC
Pin
Part.no PG355
93 43 65 30 100 0,135 SR5001
Speed 180°/s 93 43 65 30 150 0,135 SR5002
technical dept. R Di De
De
mm mm mm
Di 100 630 830
150 630 830
Length of Chain
Chain Degrees No
SR5001 90 12
SR5001 180 16
SR5001 270 20
SR5001 360 24
SR5002 90 14
SR5002 180 18
SR5002 270 23
SR5002 360 27
168
®

specific position.
SR500
in one position offering the possibility of observed and created a support guide which with removable
attaching the chain externally. (Fig. A) can do this. (Fig. B) frames
220 ˚
3
H
ø9
0
30
5
37
R.
R.
R. 415
12 R. 278
5
32
5
R.
37
ø1
100
R. 375
0
110
R.
4 R. 325
SUP500
Fig. A Fig. B
Chain H For applications with rotations exceeding

Type 200° it is necessary to use the appropriate
SR5001 330 accessories for supporting the cable chain.
SR5002 410 (see page 28).
Steel End Brackets Part Numbers

Chain End Brackets
Type Set
SR500... A500KM
Chain End Brackets
Type Set
SR500... A500K

Technical Office
169
SR510TN-SR515TN
Double share Sideband & Frame A
twin-pin.
D B Pin SR510TN
4 Part.no PG511
Pin SR515TN
26 27 27 Part.no PG515-B515
132 55 88 46 125 0,200 SR510TN
Speed 180°/s
132 55 88 46 175 0,200 SR515TN
technical dept. De Chain R Di De

Di Part Number mm mm mm
SR510TN 125 940 1220
SR515TN 175 1060 1340
R
Length of Chain
Chain Degrees No
SR510TN 90 13
SR510TN 180 17
SR510TN 270 22
SR510TN 360 27
SR515TN 90 13
SR515TN 180 23
SR515TN 270 29
SR515TN 360 35
SR515TN
SR510TN
170
®

specific position.
SR510TN
equipment. The end brackets are installed
in one position offering the possibility of
For this reason Brevetti Stendalto has
observed and created a support guide which
SR515TN
attaching the chain externally. (Fig. A) can do this. (Fig. B) Chain
For particular applications it is possible to with openable frames
SR510TN
220˚
400 3
ø9
455
25 R. 25
R 5
.
R. 43
0 R. 625
.
0
50
ø1
R. 580 R.
0
20 20 645
58
R. 175
R
. 500
110
20 80 20 R
SUP510
Fig. A Fig. B
SR515TN
220˚
465
ø9
0
R. 68
R . 5 8 5
18
0 R. 520
R. 49
5
10 55 5
R. 555 R . 63
10 20 700 R 165
R.
110
20 R. 635 SUP515
Fig. A Fig. B
Chain End Brackets
Type Set
SR510TN A510TNKM
SR515TN A515TNKM
Chain End Brackets
Type Set
SR510TN A510TNK consult Brevetti Stendalto’s
SR515TN A515TNK Technical Office
171
SR545
construction with large anti-friction A
single-pin.
Frames openable from inner radius. Separator
- Unassembled Part.no S445UF
5 D B
Pin
C Part.no PG545
123 62 100 46 100 0,200 SR545SI100100
Speed 180°/s
De 100 485 760
Di
Length of Chain
R
Chain Degrees No
SR545 90 14
SR545 180 18
SR545 270 22
SR545 360 27
172
®

specific position.
SR545
in one position offering the possibility of observed and created a support guide which with openable frames
attaching the chain externally. (Fig. A) can do this. (Fig. B)
220 ˚
3
320
ø9 6
37
R.
25 0 R. 314
R. 21 R. 232
4
25
ø1
R. 334
4
0
33
15 15
0
0 14
R.
13
40 0
15 80 15 R. 25
4 R.
SUP545
Fig. A Fig. B

Chain End Brackets
Type Set
SR545 A545KM
Chain End Brackets
Type Set
SR545 A545K

Technical Office
173
SR599
with un-screwable aluminium frames
construction with three single-pins in A
steel for high torsion resistance. C
Alu-frames are un-screwable from inner
and outer radius.
D B
5
45 77,5 77,5
272 85 210 59 220 0,900 SR599
Speed 180°/s
De
Di 220 1400 2000
R Length of Chain
Chain Degrees No
SR599 90 14
SR599 180 19
SR599 270 23
SR599 360 28
Version with horizontal separators
174
®

specific position.
SR599
in one position offering the possibility of observed and created a support guide which with un-screwable
attaching the chain externally. (Fig. A) can do this. (Fig. B) aluminium frames
180°
3
610
R. 1
R.
023
937
R
.8
R.
30
73
0
0
Ø10,5 R. 770 R. 77
29 5 0.5
R. 97 ø1
29 R. 975 SUP599
Fig. A Fig. B

Chain End Brackets
Type Set
SR599 A599KM
Chain End Brackets
Type Set
SR599 A599NK

Technical Office
175
Separation System
The Separation System, proposed by Brevetti Stendalto, guarantees the perfect disposal of cables inside the
chain and allows an easy opening of the frame also when the chain is already harnessed.
A wide range of horizontal separators is available in order to obtain many different arrangments.
C Horizontal
X X X
X Separator
2 mm 2
4.5 Part Number
8.5
SO01016 16
SO01025 25
SO01029 29
SO01035 35
SO01041 41 SO01016 + S... + SO01016
Horizontal separator 14.5 SO01050 50 SO01016 + S... + SO01025
Halfway separator SO01059 59 SO01025 + S... + SO01025
Halfway mobile separator SO01066 66 SO01029 + S... + SO01029
Side separator SO01074 74 SO01025 + S... + SO01041
SO01091 91 SO01041 + S... + SO01041
3 SO01108
SO01120
108
120
SO01059 + S... + SO01041
SO01140 140 SO01091 + S... + SO01041
SR445MI/ME/PI/PE
Side separator. Halfway separator. Halfway mobile separator. Horizontal separator.
Up to 4 horizontal separations.
8 8.5
12 12.5
12.5
20.5
28.5
32.5
45
45
4
28.5
8
12.5
12.5
4
8.5
8.5
8.5
5 5
SI4452FPU S4452FPU SI4453FPU S4453FPU
SP4452F SP4453F
SP4452F.1 (SR445PI/PE) SP4453F.1 (SR445PI/PE)
SR660A - SR306SI/SE/CI/CE
16.5
37
4
16.5
3,5
SP3061F S3061F
SI3061F
SR770A
Side separator. Halfway separator. Horizontal separator.
16
28
40
60
4
8
16
16
16
SP770A3F S770A3F
176
®
SR307SI/SE
Side separator. Halfway separator. Horizontal separator.
11.5 6 6 11.5
21.5
31.5
47
4
11.5 6
11.5
SP3073F S3073F
SR308SI/SE/CI/CE
11
26.5
11 11.5 11.5
42
57
11 11.5
4
11
3
3,5
SI3083F S3083F SP3083F
SR309SI/SE/CI/CE - SR475MI/ME/PI/PE - SR478MI/ME/PI/PE

7 13.75
24.75
35.75
46.75
57.75
75.5
7
7
13.75 7
13.75 7
13.75 7
13.75 7
13.75
5
SI309 S3095F SP3095F
SR325L - SR325LI/LE/PI
X
4,5 Horizontal
X
Separator
2,5 Part Number mm
11,3
2,4
25
SO11031 31
11,3
SO11052 52
9
SO11068 68
SI325
SP3251F
SR435MI/ME/PI/PE
Possibili fino a 4 separazioni orizzontali.
X Horizontal
4,5 X
Separator
Part Number mm
2,4
3
8,9
SO11031 31
5 5
35
SO11052 52
8,9
SO11068 68
9
SI4353F consult Brevetti Stendalto’s
SP4353F Technical Office
177
Steel Cable Chains
Steel Series
Series BS2000 page 180

Series BS3500C page 186
Series BS4000C page 190 New
Cable drag chains in steel for long travel distance page 196
Special offshore applications page 197
Completely enclosed design
to protect chain contents from
steel and wood chips, dust, etc.
Openable
and removable
cover frames
Large selection
of chain-frames:
- aluminum draw plates
cut to size;
- aluminum drilled
frames, according
to customer drawings
Special tough construction

with double spring washer,
antifriction plates
and rivet fixing
179
BS2000
Cable Chains in Bright Zinc Plated Steel
W W
Inner height (D) 32 mm 8,5 SL 8,5 8,5 SL 8,5
C
Double share link construction.
Single-rivet fixing and standard large
washer and nylon anti-friction disk to 3 D B B
assure durable smooth movement.
Alu-draw frames (T) or Alu-drilled plates 16,5 10 MIN 4 MAX ø38
(TL) are un-screwable from both sides.
As standard the frames every second Separator
link, on request every link. - Unassembled Part.no S306CO
Vertical and horizontal separator systems
- Assembled Part.no S306COMC
are available.
Also available in Stainless Steel.
Aluminium Draw Plates with Separators in Nylon
Technical characteristics W B C D R Weight/m Chain
112 53 79 32 075-115-150-205-250-305 4,90 2000NT079 *
Speed 0,5 m/s 137 53 104 32 075-115-150-205-250-305 5,00 2000NT104 *
Acceleration 2 m/s2 187 53 154 32 075-115-150-205-250-305 5,30 2000NT154 *
For higher requirements please consult our 237 53 204 32 075-115-150-205-250-305 5,60 2000NT204 *
technical dept. 287 53 254 32 075-115-150-205-250-305 5,80 2000NT254 *
337 53 304 32 075-115-150-205-250-305 6,10 2000NT304 *
C+33 53 .... 32 075-115-150-205-250-305 2000NT **
*Complete the code by inserting the value of the radius (R): Ex. 2000NT154 2 5 0
4 **Complete the code by inserting the value of the quote C and the radius (R): Ex. 2000NT 1 2 3 2 5 0
Chain equipped with aluminium draw plates every pitch: complete the code by inserting the letter D.
Ex. 2000NT154250 D
LS N
LS
2 R Aluminium Split Cross Piece Created by Design
W B R Chain
75 mm mm mm Part Number
M H
SL+17 53 075-115-150-205-250-305 2000NTL ***
***Complete the code by inserting the value SL and the radius (R): Ex. 2000NTL 1 5 0 2 5 0
LS
LS R H* N M N1 M1
2 M1
MOVING POINT R mm mm mm mm mm mm
075 214 180 390 - -
230
115 294 220 515 500 1080
FIXED POINT 75 N1
150 364 255 625 675 1485
205 474 310 795 885 2005
250 564 360 940 1030 2385
Length of chain (L) 305 674 410 1110 1190 2825
2 * The height H should be increased by 10 mm/m
plus length of curve (M) approx. because of preload. In case of limitation to
the available space, refer to the Technical Dptm.
L= LS + M or M1
2
180
®

Capacity Diagram End Brackets
2
)
The end brackets set, containing
four steel plates screwed to the links BS2000
Cable Chain
in relationship to the weight allows the two ends of the chain to in Bright Zinc Plated
of the cables and hoses be attached to the equipment. Steel
200
150
100
60
40
20
10
8
6
4
3
Fig. A
2
1 inner or outer radius. (Fig A)
0 1 2 3 4 5 6 7

2
LS
2
LS 32
4
See page 194
ø10.5
F
The red marking in the 60
= =
various widths of chains 150 75 30
assembled with aluminium
draw plates every second pitch.
For applications with LS2 Chain F
Type mm
the area of the diagram Supplementary movable
BS2000NT079 65 separators.
BS2000NT104 90
BS2000NT154 140
BS2000NT204 190
page 30). BS2000NT254 240
BS2000NT304 290
Special dimension F=W-47

Type Part Numbers
Chain End Brackets
Type Set
BS2000... A2000NKM
Chain End Brackets
BS2000... A2000NK consult Brevetti Stendalto’s
Technical Office
181
BS3000
W W
10 SL 10
C 10 SL 10
4 D B B
washer and nylon anti-friction disk to
Alu-draw frames (T) or Alu-drilled plates 19 12 MIN 4 MAXø58
link, on request every link. - Unassembled Part.no S308CO
- Assembled Part.no S308COMC
are available.
144 74 106 52 150-220-250-305-400-535 7,40 3000NT106 *
Speed 0,5 m/s 194 74 156 52 150-220-250-305-400-535 7,60 3000NT156 *
Acceleration 2 m/s2 244 74 206 52 150-220-250-305-400-535 7,80 3000NT206 *
For higher requirements please consult our 294 74 256 52 150-220-250-305-400-535 8,00 3000NT256 *
technical dept. 344 74 306 52 150-220-250-305-400-535 8,20 3000NT306 *
C+38 74 .... 52 150-220-250-305-400-535 3000NT **
**Complete the code by inserting the value of the quote C and the radius (R): Ex. 3000NT 1 2 3 2 5 0
4 Chain equipped with aluminium draw plates every pitch: complete the code by inserting the letter D.
Ex. 3000NT156250 D
LS N
LS Aluminium Split Cross Piece Created by Design
2 W B R Chain
R
mm mm mm Part Number
95 SL+20 74 150-220-250-305-400-535 3000NTL ***
M H
R H* N M N1 M1
LS
2 M1
MOVING POINT R 150 388 290 670 830 1770
220 528 360 890 1145 2515
250
250 588 385 980 1255 2800
FIXED POINT 95 N1 305 698 440 1150 1450 3285
400 888 540 1450 1740 4065
535 1158 675 1880 2110 5105
Length of chain (L)
* The height H should be increased by 10 mm/m
Half travel distance ( LS ) approx. because of preload. In case of limitation to
2 the available space, refer to the Technical Dptm.
L= LS + M or M1
2
182
®

2
)
Cable Chain
200
150
100
60
40
20
10
8
6
4
3
Fig. A
2
0 1 2 3 4 5 6 7

2
LS
2
LS 44
4
See page 194
11 22
diagram area considers the 90 F
difference of weight between 15 60 15
assembled with aluminium 190 95 45
Type mm
BS3000NT156 138
BS3000NT206 188
BS3000NT256 238
page 30). BS3000NT306 288

Type Part Numbers
Chain End Brackets
Type Set
BS3000... A3000NKM
Chain End Brackets
Technical Office
183
BS3500
W W
Inner height (D) 65 mm 11,5 SL 11,5 11,5 SL 11,5
Double share link construction. C
washer and nylon anti-friction disk to 6 D B B
Alu-draw frames (T) or Alu-drilled plates
24,5 15 MIN 5 MAX ø70
link, on request every link. - Unassembled Part.no ST3500F
- Assembled Part.no ST3500FMC
are available.
153 95 104 65 200-250-300-350-400-450-500-600 12,00 3500NT104 *
Speed 0,5 m/s 203 95 154 65 200-250-300-350-400-450-500-600 12,30 3500NT154 *
Acceleration 2 m/s2 253 95 204 65 200-250-300-350-400-450-500-600 12,70 3500NT204 *
For higher requirements please consult our 303 95 254 65 200-250-300-350-400-450-500-600 13,00 3500NT254 *
technical dept. 353 95 304 65 200-250-300-350-400-450-500-600 13,30 3500NT304 *
453 95 404 65 200-250-300-350-400-450-500-600 14,00 3500NT404 *
C+49 95 .... 65 200-250-300-350-400-450-500-600 3500NT **
4 **Complete the code by inserting the value of the quote C and the radius (R): Ex. 3500NT 1 2 3 2 5 0
Chain equipped with aluminium draw plates every pitch: complete the code by inserting the letter D.
Ex. 3500NT154250 D
LS N
LS
2 R
Aluminium Split Cross Piece Created by Design
W B R Chain
125 mm mm mm Part Number
M H
SL+23 95 200-250-300-350-400-450-500-600 3500NTL ***
LS
LS R H* N M N1 M1
2 M1
MOVING POINT R mm mm mm mm mm mm
300
200 512 375 880 1100 2360
250 612 425 1040 1310 2870
FIXED POINT 125 N1
300 712 480 1200 1495 3335
350 812 525 1350 1670 3775
400 912 575 1510 1825 4190
Length of chain (L) 450 1012 625 1670 1975 4595
2
600 1312 775 2140 2390 5750
L= LS + M or M1 approx. because of preload. In case of limitation to
184
®

2
)
Cable Chain
200
150
100
60
40
20
10
8
6
4
3
Fig. A
2
0 1 2 3 4 5 6 7 8 9 10 11

2
LS
2
LS
56 4
30

See page 195
15
The red marking in the 130 F
25 80 25
250 125 65
Type mm
BS3500NT154 130
BS3500NT204 180
BS3500NT254 230
page 30). BS3500NT304 280
BS3500NT404 380

Type Part Numbers
Chain End Brackets
Type Set
BS3500... A3500NKM
Chain End Brackets
Technical Office
185
BS3500C
W
Inner height (D) 65 mm 11,5 SL 11,5
Double share link construction. C
washer and nylon anti-friction disk to 6 D B
assure smooth and durable movement.
The strong Alu-covers are un-screwable
24,5
from both sides. Separator
Vertical and horizontal separator systems - Unassembled Part.no ST3500F
are available. - Assembled Part.no ST3500FMC

153 95 104 65 200-250-300-350-400-450-500-600 13,80 3500NC104 *
Speed 0,5 m/s 203 95 154 65 200-250-300-350-400-450-500-600 14,80 3500NC154 *
Acceleration 2 m/s2 253 95 204 65 200-250-300-350-400-450-500-600 15,80 3500NC204 *
For higher requirements please consult our 303 95 254 65 200-250-300-350-400-450-500-600 16,80 3500NC254 *
technical dept. 353 95 304 65 200-250-300-350-400-450-500-600 17,80 3500NC304 *
453 95 404 65 200-250-300-350-400-450-500-600 19,80 3500NC404 *
C+49 95 .... 65 200-250-300-350-400-450-500-600 3500NC **
*Complete the code by inserting the value of the radius (R): Ex. 3500NC154 2 5 0
4 **Complete the code by inserting the value of the quote C and the radius (R): Ex. 3500NC 1 2 3 2 5 0
LS N
LS R H* N M N1 M1
2 R mm mm mm mm mm mm
125 200 512 375 880 1100 2360
M H
250 612 425 1040 1310 2870
300 712 480 1200 1495 3335
350 812 525 1350 1670 3775
LS 400 912 575 1510 1825 4190
LS 450 1012 625 1670 1975 4595
2 M1
MOVING POINT R 500 1112 675 1825 2120 4985
300
600 1312 775 2140 2390 5750
FIXED POINT 125 N1 * The height H should be increased by 10 mm/m

approx. because of preload. In case of limitation to
the available space, refer to the Technical Dptm.
Length of chain (L)

2
L= LS + M or M1
2
186
®

2
)
four steel plates screwed to the links BS3500C
Cable Chain
200
150
100
60
40
20
10
8
6
4
3
Fig. A
2
1
0 1 2 3 4 5 6 7 8 9 10 11

2
LS
4
56
LS
2
See page 195
30

F
125 110

Chain F
and weights not included in Type mm
the area of the diagram BS3500NC104 80
showing self-supporting BS3500NC154 130
capacity, verify the possible BS3500NC204 180
use of support rollers (see BS3500NC254 230
page 30). BS3500NC304 280
BS3500NC404 380

Type Part Numbers
Chain End Brackets
Type Set
BS3500C... A3500NCKM **
Chain End Brackets
Type Set
BS3500C... A3500NCK
** 1=Pos.1; 2=Pos.2; 3=Pos.3 For further information please
See end brackets mounting variations consult Brevetti Stendalto’s
page 31. Technical Office
187
BS4000
W
W
15 SL 15
15 SL 15
C
Triple-rivet fixing and standard large
washer and nylon anti-friction disk to D B B
10
Un-screwable Alu-draw frames (T) are
33 30 MIN 5 MAX 115
standard mounted and every link.
Alu-drilled plates (TL) are mounted every Separator
second link with an Alu-draw frames - Unassembled Part.no S310TCF9
every other link.
- Assembled Part.no S310TCF9MC
Separator systems available.
216 145 150 112,5 250-300-350-400-450-500-550-600-700-750-850-1000 20,60 4000T150 *
Speed 0,5 m/s 266 145 200 112,5 250-300-350-400-450-500-550-600-700-750-850-1000 21,70 4000T200 *
Acceleration 2 m/s2 316 145 250 112,5 250-300-350-400-450-500-550-600-700-750-850-1000 23,10 4000T250 *
For higher requirements please consult our 366 145 300 112,5 250-300-350-400-450-500-550-600-700-750-850-1000 24,40 4000T300 *
technical dept. 466 145 400 112,5 250-300-350-400-450-500-550-600-700-750-850-1000 27,20 4000T400 *
566 145 500 112,5 250-300-350-400-450-500-550-600-700-750-850-1000 29,90 4000T500 *
C+66 145 .... 112,5 250-300-350-400-450-500-550-600-700-750-850-1000 4000T **
*Complete the code by inserting the value of the radius (R): Ex. 4000T150 2 5 0
4 **Complete the code by inserting the value of the quote C and the radius (R): Ex. 4000T 1 2 3 2 5 0
LS N Aluminium Split Cross Piece Created by Design

LS W B R Chain
2
R mm mm mm Part Number
SL+30 145 250-300-350-400-450-500-550-600-700-750-850-1000 4000TL ***
180 M H ***Complete the code by inserting the value SL and the radius (R): Ex. 4000TL 1 5 0 2 5 0
R H* N M N1 M1
mm mm mm mm mm mm
LS
LS
250 670 510 1150 1545 3285
2 M1 300 770 555 1305 1755 3790
MOVING POINT R
350 870 605 1460 1950 4265
350
400 970 655 1620 2125 4715
450 1070 710 1780 2295 5150
FIXED POINT 180 N1 500 1170 755 1930 2455 5570
550 1270 805 2090 2605 5975
600 1370 855 2245 2755 6375
Length of chain (L) 700 1570 955 2560 3035 7155
750 1670 1010 2720 3170 7535
2
1000 2170 1255 3500 - -
L= LS + M or M1 approx. because of preload. In case of limitation to
188
®

2
)
Cable Chain
200
150
100
60
40
20
10
8
6
4
3
Fig. A
2
0 1 2 3 4 5 6 7 8 9 10 11 variations page 31.
2
LS
LS
4
85
2
30
See page 195
15
The red marking in the 140 F
diagram area considers the 25 90 25
various widths of chains 360 180
Chain F
the area of the diagram BS4000T150 136 Supplementary movable
showing self-supporting BS4000T200 186 separators.
capacity, verify the possible BS4000T250 236
use of support rollers (see BS4000T300 286
page 30). BS4000T400 386
BS4000T500 486

Type Part Numbers
Chain End Brackets
Type Set
BS4000... A4000KM **
Chain End Brackets
Type Set
BS4000... A4000K
189
New
BS4000C
W
15 SL 15
C
washer and nylon anti-friction disk to D B
10
The strong Alu-covers are un-screwable
33
from both sides.
Separator systems available. Separator
Also available in Stainless Steel. - Unassembled Part.no S310TCF9
- Assembled Part.no S310TCF9MC

216 145 150 104 250-300-350-400-450-500-550-600-700-750-850-1000 24,70 4000C150 *
Speed 0,5 m/s 266 145 200 104 250-300-350-400-450-500-550-600-700-750-850-1000 26,00 4000C200 *
Acceleration 2 m/s2 316 145 250 104 250-300-350-400-450-500-550-600-700-750-850-1000 27,40 4000C250 *
For higher requirements please consult our 366 145 300 104 250-300-350-400-450-500-550-600-700-750-850-1000 28,70 4000C300 *
technical dept. 466 145 400 104 250-300-350-400-450-500-550-600-700-750-850-1000 31,40 4000C400 *
566 145 500 104 250-300-350-400-450-500-550-600-700-750-850-1000 34,10 4000C500 *
C+66 145 .... 104 250-300-350-400-450-500-550-600-700-750-850-1000 4000C **
*Complete the code by inserting the value of the radius (R): Ex. 4000C150 2 5 0
4 **Complete the code by inserting the value of the quote C and the radius (R): Ex. 4000C 1 2 3 2 5 0
LS N
R H* N M N1 M1
LS
2 mm mm mm mm mm mm
R 250 670 510 1150 1545 3285
180
300 770 555 1305 1755 3790
M H 350 870 605 1460 1950 4265
400 970 655 1620 2125 4715
450 1070 710 1780 2295 5150
500 1170 755 1930 2455 5570
LS 550 1270 805 2090 2605 5975
LS 600 1370 855 2245 2755 6375
2 M1
MOVING POINT R 700 1570 955 2560 3035 7155
750 1670 1010 2720 3170 7535
350 850 1870 1105 3030 3430 8280
180 N1
1000 2170 1255 3500 - -
FIXED POINT
approx. because of preload. In case of limitation to
Length of chain (L) the available space, refer to the Technical Dptm.

2
L= LS + M or M1
2
190
®

2
)
four steel plates screwed to the links BS4000C
Cable Chain
200
150
100
60
40
20
10
8
6
4
3
Fig. A
2
0 1 2 3 4 5 6 7 8 9 10 11
variations page 31.
2
LS
4
85
LS
2
30
See page 195
15
The red marking in the F
difference of weight between 90 25
assembled with aluminium 180
Chain F
the area of the diagram BS4000C150 136 Supplementary movable
showing self-supporting BS4000C200 186 separators.
capacity, verify the possible BS4000C250 236
use of support rollers (see BS4000C300 286
page 30). BS4000C400 386
BS4000C500 486

Type Part Numbers
Chain End Brackets
Type Set
BS4000... A4000CKM **
Chain End Brackets
Type Set
BS4000... A4000CK
191
BS4500
W W
23,5 23,5 23,5 SL 23,5
Inner height (D) 182 mm SL
C
12
washer and nylon anti-friction disk to D B B
Un-screwable Alu-draw frames (T) are MIN 6
45 20 MAX 180
standard mounted and every link.
Alu-drilled plates (TL) are mounted every Separator
second link with an Alu-draw frames - Unassembled Part.no ST4500C
every other link.
- Assembled Part.no ST4500CMC
390 220 300 182 400-600-800-1000-1250-1500 46,5 4500T300 *
Speed 0,5 m/s 440 220 350 182 400-600-800-1000-1250-1500 47,5 4500T350 *
Acceleration 2 m/s2 490 220 400 182 400-600-800-1000-1250-1500 48,5 4500T400 *
For higher requirements please consult our 540 220 450 182 400-600-800-1000-1250-1500 49,0 4500T450 *
technical dept. 590 220 500 182 400-600-800-1000-1250-1500 49,5 4500T500 *
690 220 600 182 400-600-800-1000-1250-1500 51,0 4500T600 *
C+90 220 .... 182 400-600-800-1000-1250-1500 4500T **
*Complete the code by inserting the value of the radius (R): Ex. 4500T300 4 0 0
4 **Complete the code by inserting the value of the quote C and the radius (R): Ex. 4500T 1 2 3 4 0 0

W B R Chain
SL+47 220 400-600-800-1000-1250-1500 4500TL ***
***Complete the code by inserting the value SL and the radius (R): Ex. 4500TL 3 1 5 4 0 0
LS N R H* N M
LS mm mm mm mm
2 R 400 1060 770 1760
600 1460 970 2390
250 M 800 1860 1170 3020
H
1000 2260 1370 3650
1250 2760 1620 4430
Length of chain (L) 1500 3260 1870 5220
* The height H should be increased by 10
Half travel distance ( LS ) mm/m approx. because of preload. In case of
2 limitation to the available space, refer to the
plus length of curve (M) Technical Dptm.
L= LS + M
2
192
®

2
)
Cable Chain
500
400
300
200
150
60
40
20
10
8
6
4
3
2
1
Fig. A
0 1 2 3 4 5 6 7 8 9 10 11 12 13 Chain fixed outside the radius. (Fig A)
LS
2
LS
4
130
13
200
diagram area considers the F
25 7575 25
various widths of chains Supplementary movable
separators.
assembled with aluminium 500 P = 250 100
Chain F
the area of the diagram BS4500T300 285
showing self-supporting BS4500T350 335
capacity, verify the possible BS4500T400 385
use of support rollers (see BS4500T450 435
page 30). BS4500T500 485
BS4500T600 585
Special dimension F=W-105 Steel laminar cover.

Type Part Numbers
Chain End Brackets
Type Set
BS4500... A4500KM **
Chain End Brackets
Type Set
BS4500... A4500K
193
Sliding Cable Chains
in Bright Zinc Plated Steel
Sliding low-friction skids fastened to the links allow chains running on
themselves, all the while granting them to get more longer strokes.
Un-screwable Alu-draw frames (T) are standard mounted and every link.
Alu-drilled plates (TL) are mounted every second link with an Alu-draw
frames every other link.
Technical characteristics
W W
Speed 2 m/s 12,5 SL 12,5 12,5 SL 12,5
C
Acceleration 2 m/s2
For higher requirements please consult our 3 D B B
technical dept.
20,5 10 MIN 4 MAX ø38

BS2000PT W B C D R Weight/m Chain
mm mm mm mm mm kg Part Number
120 58,5 079 32 115-150-205-250-305 5,55 2000PT079 *
4 145
195
245
58,5
58,5
58,5
104
154
204
32
32
32
115-150-205-250-305
115-150-205-250-305
115-150-205-250-305
5,65
5,95
6,25
2000PT104
2000PT154
2000PT204
*
*
*
295 58,5 254 32 115-150-205-250-305 6,45 2000PT254 *
345 58,5 304 32 115-150-205-250-305 6,75 2000PT304 *
C+41 58,5 .... 32 115-150-205-250-305 2000PT **

W B R Chain
SL+25 58,5 115-150-205-250-305 2000PTL ***
*Complete the code by inserting the value of the radius (R): Ex. 2000PT154 2 5 0
**Complete the code by inserting the value of the quote C and the radius (R): Ex. 2000PT 1 2 3 2 5 0
***Complete the code by inserting the value of the quote SL and the radius (R): Ex. 2000PTL 1 5 0 2 5 0
W W
13,5 SL 13,5
C 13,5 SL 13,5
4 D B B
22,5 12 MIN 4 MAXø58

BS3000PT W B C D R Weight/m Chain
151 81,5 106 52 150-220-250-305-400-535 8,10 3000PT106 *
201 81,5 156 52 150-220-250-305-400-535 8,30 3000PT156 *
251 81,5 206 52 150-220-250-305-400-535 8,50 3000PT206 *
301 81,5 256 52 150-220-250-305-400-535 8,70 3000PT256 *
351 81,5 306 52 150-220-250-305-400-535 8,90 3000PT306 *
C+45 81,5 .... 52 150-220-250-305-400-535 3000PT **
W B R Chain
SL+27 81,5 150-220-250-305-400-535 3000PTL ***
194 ***Complete the code by inserting the value of the quote SL and the radius (R): Ex. 3000PTL 1 5 0 2 5 0
®
BS3500PT/PC
Aluminium Draw Plates with Separators in Nylon W
W B C D R Weight/m Chain 19 SL 19
C
168 107 104 65 200-250-300-350-400-450-500-600 13,10 3500PT104 * 6 D B
218 107 154 65 200-250-300-350-400-450-500-600 13,40 3500PT154 *
32
268 107 204 65 200-250-300-350-400-450-500-600 13,80 3500PT204 *
318 107 254 65 200-250-300-350-400-450-500-600 14,10 3500PT254 * W
368 107 304 65 200-250-300-350-400-450-500-600 14,40 3500PT304 * 19 SL 19
468 107 404 65 200-250-300-350-400-450-500-600 15,10 3500PT404 *

C+64 107 .... 65 200-250-300-350-400-450-500-600 3500PT ** B

15 MIN 5 MAX ø70
W B R Chain
SL+38 107 200-250-300-350-400-450-500-600 3500PTL ***

W B C D R Weight/m Chain
168 107 104 65 200-250-300-350-400-450-500-600 14,90 3500PC104 *
218 107 154 65 200-250-300-350-400-450-500-600 15,90 3500PC154 *
268 107 204 65 200-250-300-350-400-450-500-600 16,90 3500PC204 *
318 107 254 65 200-250-300-350-400-450-500-600 17,90 3500PC254 *
368 107 304 65 200-250-300-350-400-450-500-600 18,90 3500PC304 *
468 107 404 65 200-250-300-350-400-450-500-600 20,90 3500PC404 *
C+64 107 .... 65 200-250-300-350-400-450-500-600 3500PC
*Complete the code by inserting the value of the radius (R): Ex. 3500PC154 2 5 0
**
**Complete the code by inserting the value of the quote C and the radius (R): Ex. 3500PC 1 2 3 2 5 0
4
BS4000PT/PC
Aluminium Draw Plates with Separators in Nylon W
W B C D R Weight/m Chain 21 SL 21
C
228 161,5 150 112,5 250-300-350-400-450-500-550-600-700-750-850 22,30 4000PT150 * B
10 D
278 161,5 200 112,5 250-300-350-400-450-500-550-600-700-750-850 23,40 4000PT200 *
328 161,5 250 112,5 250-300-350-400-450-500-550-600-700-750-850 24,80 4000PT250 *
39
378 161,5 300 112,5 250-300-350-400-450-500-550-600-700-750-850 26,10 4000PT300 *
478 161,5 400 112,5 250-300-350-400-450-500-550-600-700-750-850 28,90 4000PT400 * W
21 SL 21
578 161,5 500 112,5 250-300-350-400-450-500-550-600-700-750-850 31,60 4000PT500 *
C+78 161,5 .... 112,5 250-300-350-400-450-500-550-600-700-750-850 4000PT **
B
W B R Chain 36 MIN 5 MAX 115
SL+42 161,5 250-300-350-400-450-500-550-600-700-750-850 4000PTL ***

W B C D R Weight/m Chain
228 161,5 150 104 250-300-350-400-450-500-550-600-700-750-850 26,10 4000PC150 *
278 161,5 200 104 250-300-350-400-450-500-550-600-700-750-850 27,50 4000PC200 *
328 161,5 250 104 250-300-350-400-450-500-550-600-700-750-850 28,80 4000PC250 *
378 161,5 300 104 250-300-350-400-450-500-550-600-700-750-850 30,20 4000PC300 *
478 161,5 400 104 250-300-350-400-450-500-550-600-700-750-850 32,90 4000PC400 *
578 161,5 500 104 250-300-350-400-450-500-550-600-700-750-850 35,60 4000PC500 *
C+78 161,5 .... 104 250-300-350-400-450-500-550-600-700-750-850 4000PC **
*Complete the code by inserting the value of the radius (R): Ex. 4000PC150 3 5 0
**Complete the code by inserting the value of the quote C and the radius (R): Ex. 4000PC 1 2 3 3 5 0
consult Brevetti Stendalto’s 195
Technical Office
Cable Drag Chains in Steel
for Long Travel Distance
The use of cable chains in applications with a fixed bracket and a movable towing bracket.
particularly long travel distances offers many A secondary similar closed loop, made of steel
benefits .The possibilities of the combined tran- wire rope, drives the supporting frame along
sportation of high power cables, signal cables the entire travel at a suitable speed, thus
and hydraulic hoses, together with ease of use ensuring a continuous support to relieve all
and no need for maintenance, are the unque- stresses. In addition to this a trough is arranged
stionable advantages of the system. to contain and guide the chain system along
Specific applications, characterised by the total travel. The chains are fitted with
particularly aggressive conditions in the wheels on ball bearings, to keep to a minimum
environment, require cable chains in steel. the friction on the supporting frame. The
Brevetti Stendalto has offered for many years, supporting frame can be made both in
with positive results their own system based on galvanised steel, or if requested, in stainless
the use of two steel drag chains and a travelling steel.
internal supporting frame. The chains are
arranged in a closed loop configuration, having
BS3500 chains with

supporting frame applied
to De Icing equipment at
München airport
(Germany).
The length of the travel
distance is 90m and it’s
velocity is 90m per minute.
196
Special off-shore
Applications
The Brevetti Stendalto steel cable chains have On request cable chains of special dimensions
been used in Off-shore applications for many which have been personalised according to the
years. The high standard of quality required and clients needs are being used.
the special materials needed are characteristics .
in these kinds of applications.
Platform “Oseberg”
A
A: BS4500 chain in
stainless steel 316L
B: BS4500 chain in
stainless steel 316L for rota-
tions of ± 180°
B
4
Platform “Tiffany”
Specially designed chains in
stainless steel 316L
Length of travel
distance: 27m
Total weight of the chains:
13 Ton.
197
Flexible Cables
for Cable Chains
Characteristics
Brevetti Stendalto, aware of the continuous

development of the high technology production
processes, offers a number of flexible and high
flexible cables, constructed according to the
most recent technologies. These high flexible
cables enable a continuous operation for
multi-shift-work under conditions of extreme
bending stress (1), for example industrial robots,
machine tools and for the working of wood,
automation systems etc.
The protection control according to the DIN
VDE rules, gives a certificate showing the high
standard of quality of the Brevetti Stendalto
cables.
The wide choice of products composed of
different types of cables, allows us to answer
to the growing demand from all parts of the
technical department.
(1)
The Brevetti Stendalto
cables have been tested
with accelerations
exceeding 20 m/s 2 and
speed of 6 m/s.
199
Flexible Cables
Installation
For correct installation of cables in the cable (Fig. 2) It is important, when having high
chain, it is important to follow the guidelines velocities and accelerations, to avoid the
listed below: superimposing of the cables. Avoid
contact between the different cables and
1- The cables have to be installed and unrolled hoses internally in the chain.
from the drum carefully to avoid damage. It
is therefore important to follow the 4- The cables/hoses must be placed and
indications in Fig.1. The coil should not be installed in such a way so that they can
unrolled from the centre, but it should be move freely side ways during the movement
placed on a support or on a turning plane of the chain and also so that in the bending
and then be unrolled starting from the curve they do not cause any tension or
external ends. traction on the cable chain.
2- Check the minimum allowed bending radius 5- The cables/hoses must be installed and
of the chosen cable and compare it with the fixed using the appropriate accessories (see
bending radius of the chain. For a correct pages 202/203), at both extremities of the
installation, the last mentioned should be chain.
larger compared to the bending radius of the
cable. 6- Verify the installation of the cables in the
chains with Brevetti Stendalto’s technical
3- There must be at least 10%-20% free space office or request a personalised project by
between the cable diameters and the filling in the appropriate module (page 205).
internal dimensions of the chain. Install the
cables/hoses symmetrically in the chain with
the larger and heavier towards the
outside and the smaller and lighter in the
centre. Further, it is necessary to separate
5 the cables using the separators, available for

all the chains, or the split cross pieces with
holes done in the appropriate sizes accor-
ding to the external diameter of the cable.
Fig. 1 Fig. 2
MIN 10% MIN 20%
D D
200
Ready to Install Chains with
Electrical Cables
On request chain ready to be used with
cables and plugs connected.
Please contact our sales departments for
further information.
With Hydraulic Hoses

On request chain ready to be used with
hydraulic hoses.
Please contact our sales departments for
further information.
5
Custom-Built Packaging
For very large chains, example offshore packaging, for save transport and facilitated
applications, harbour cranes, steel mills, Brevetti assembling on-site.
Stendalto offers on request custom-built
201
Flexible Cables
Tiewrap Clamp in Nylon
To allow easy fixing of the cables at the chain’s

end brackets, Brevetti Stendalto offers strong
nylon tiewrap clamps.
The tiewrap is mounted on to a steel profile to
assure a strong support.
This fixing system is available for our Heavy,
Sliding and Protection series.
Order code:
Chain type: SR306SE168107
Tiewrap code for steel
end brackets: SFC306SE168
Tiewrap code
for nylon end brackets: CFC306SE168
Steel Cable Clamps
The steel cable clamps connect the cable to the

extremities of the chain.
The plastic counter pressure cradle with the
5 integrated screw tighten and fix the cable.
The smooth surface and the design of the
cradles guarantee high stability and avoid any
damage to the cables.
Special versions are available on request.
Fixing set is composed by the following parts:
• steel clamps with pressure cradle
• counter pressure cradle
• doublesided cradle for double and triple
clamps
• steel mounting rails
Fig. A
202
®
11
C-profile rail
Part.no Length mm 10
6000001 Standard 800 mm; 1
available on request with different length 25

Single clamp in galvanised steel with 1 plastic pressure cradle
and 1 counter pressure cradle
Part.no Diameter mm L H
6000614C 06-14 18 62
6001418C 14-18 22 66 PRESSURE
CRADLE
6001822C 18-22 26 70 COUNTER
PRESSURE CRADLE
6002226C 22-26 30 74 H
6002630C 26-30 34 78
6003034C 30-34 38 82 L
6003438C 34-38 42 86
6003842C 38-42 46 90
Double clamp in galvanised steel set complete with 1 plastic pressure cradle,
1 double sided cradle and 1 counter pressure cradle
Part.no Diameter mm L H
6020614C 06-14 18 78 PRESSURE
CRADLE
6021418C 14-18 22 86 DOUBLE SIDED
6021822C 18-22 26 94 CRADLE
6022226C 22-26 30 103 H

COUNTER
PRESSURE
6022630C 26-30 34 112 CRADLE
6023034C 30-34 38 120

6023438C 34-38 42 129 L
6023842C 38-42 46 138

Triple clamp in galvanised steel set complete with 1 plastic pressure cradle,
2 double sided cradles and 1 counter pressure cradle
Part.no Diameter mm L H PRESSURE
CRADLE
6031012C 10-12 16 87
6031214C 12-14 18 93
6031416C
6031618C
6031820C
6032022C
14-16
16-18
18-20
20-22
20
22
24
26
99
105
111
117
H
DOUBLE SIDED
CRADLE
COUNTER
PRESSURE
CRADLE
5
6032224C 22-24 28 123
6032426C 24-26 30 129 L
6032628C 26-28 34 135

6032830C 28-30 38 141
Counter pressure cradle

Part.no Diameter mm
6100612 06-12
6101214 12-14
6101618 16-18
6101822 18-22
6102226 22-26
6102630 26-30
6103034 30-34
6103438 34-38
6103842 38-42
Doublesided cradle
Part.no Diameter mm
6201012 10-12
6201214 12-14
6201416 14-16
6201618 16-18
6202022 20-22
6202224 22-24
6202426 24-26
6202830 28-30
6203034 30-34
6203438 34-38
6203842 38-42
Technical Office
203
Order Form
Date Fax: +39 039 834250
e-mail [email protected]
To: Sender:
Brevetti Stendalto S.p.a.

viale Stucchi 66/8
20052 Monza (MI)
Order no.:
Page of Page
Price/
item no. Part number Description Unit Q.ty unit
Signature/stamp
Delivery time:
Please copy this page and send it fax to: +39 039 834250 or e-mail to: [email protected]
204
Enquiry Form
Date Fax: +39 039 834250
e-mail [email protected]
To: Sender:
Brevetti Stendalto S.p.a.

viale Stucchi 66/8
20052 Monza (MI)
Ø outer
X Ø inner
LS
LS LS
2 2
Øo
R ute
r
Ø inner
Horizontal movement Vertical movement circular movement with 1 chain circular movement with 2 chains
Travel distance (LS) mm Rotation degrees

Bending radius (R) mm Inner Ø mm
Speed m/s Outer Ø mm
Acceleration m/s 2 Movable point Inner Ø Outer Ø
Travel frequency Mov./h day/year Movement with housing
Environment towing arm
Humidity Speed m/s
Temperature Acceleration m/s 2
Installation in/outside Travel frequency Mov./h day/year
Clean/dirty Environment
Humidity
Remarks: Temperature
Installation in/outside
Clean/dirty 6
Remarks
Suggested chain Suggested chain
CABLES/HOSES CABLES/HOSES
N° outer diameter weight per meter min. bending radius N° outer diameter weight per meter min. bending radius
mm Kg/m mm mm Kg/m mm
Request for quotation Request for technical drawing
Please copy this page and send it fax to: +39 039 834250 or e-mail to: [email protected]
205
Overview of Products Range
Inner Inner External External Pitch Bending

width height width height radius
from to from to from to from to

page mm mm
mm mm mm mm mm mm mm mm
40 SR200 12 35 12 - 18 41 15 17 18 40
42 SR250 15 - 18 - 23 - 22 30 40 -
44 SR30090/91/92 18 38 18,5 - 29 49 23,5 30 33 100
46 SR325LI/LE 40 103 25 - 57 120 38 45 50 150
48 SR325L 40 103 25 - 57 120 38 45 50 150
50 SR339 40 76 39 - 60 96 50 35 50 100
58 SR300A 15 75 18 - 27 87 23 30 40 120
60 SR300 14 36 18 - 30 52 23 30 40 120
62 SR305A 30 50 24 - 54 74 30 35 50 150
64 SR305 30 50 20 - 52 72 30 35 50 150
66 SR355A 45 95 31 - 74 124 43 40 75 200
68 SR355 45 95 30 - 74 124 45 40 75 200
70 SR400 40 60 25 - 62 82 35 40 50 150
72 SR435MI/ME 40 150 35 - 60 170 49 50 60 200
74 SR445MI/ME 50 362 45 - 72 384 64 67 75 300
76 SR660A 50 362 37 - 75 387 55 50 100 250
78 SR770A 45 357 60 - 80 392 78 70 150 300
80 SR475MI/ME 74 498 75,5 - 112 536 100,5 105 150 400
86 SR306 43 355 30 37 79 391 55 65 75 300
92 SR307 42 354 40 47 80 392 64 70 75 250
98 SR308 38 350 48 57 82 394 75 80 150 400
104 SR309 64 400 70 75,5 120 456 100 100 200 500
108 SR310 200 600 112 - 260 660 150 145 200 750
112 SR325PI 10 103 25 - 57 120 38 45 75 150

114 SR435PI/PE 40 150 35 - 60 170 48 50 75 200
116 SR445PI/PE 50 362 45 - 72 384 64 67 100 300
118 SR445AI/AE 50 362 45 - 72 384 64 67 100 300
120 SR475PI/PE 74 374 75,5 - 110 410 100,5 105 180 400
122 SR660 50 150 36 - 79 179 55 50 100 250
124 SR770 85 250 51 - 120 285 78 70 150 300
126 SR306CI/CE 43 355 37 - 79 391 55 65 107 300
128 SR308CI/CE 38 350 57 - 82 394 75 80 180 400
130 SR309C 200 400 72 - 256 456 100 100 200 500
132 SR309CI/CE 64 488 75,5 - 120 544 100 100 200 500
136 SR326 61 373 30 37 89 416 59 65 107 300
142 SR328 61 373 48 57 116 428 79 80 150 400
148 SR319 64 400 70 75,5 128 464 107 100 200 500
7
152 SR478MI/ME 74 498 75,5 - 112 536 106,5 105 150 400
154 SR478PI/PE 74 498 75,5 - 112 536 106,5 105 150 400
156 M60 115 539 60,5 - 165 589 90 90 150 400
158 M80 115 539 80,5 - 195 619 117 110 200 700
166 SR495 45 - 35 - 69 - 45 - 100 -
168 SR500 65 - 30 - 93 - 43 - 100 150
170 SR510TN 88 - 46 - 132 - 55-77 - 125 -
170 SR515TN 88 - 46 - 132 - 55-77 - 175 -
172 SR545 62 - 46 - 123 - 62 - 100 -
174 SR599 210 - 59 - 272 - 85 - 220 -
180 BS2000 79 304 32 38 112 337 53 75 75 305

182 BS3000 106 306 52 58 142 342 74 95 150 535
184 BS3500 104 404 65 70 153 453 95 125 200 600
186 BS3500C 104 404 65 - 153 453 95 125 200 600
188 BS4000 150 500 112,5 115 216 566 145 180 250 1000
190 BS4000C 150 500 104 - 216 566 145 180 250 1000
192 BS4500 300 600 182 180 390 690 220 250 400 1500
•= standard; O= on request
206
Self supported Max. travel Snap open Enclosed Vertical Horizontal Ver./horiz. Drilled Diameter
length length cover design separator separator separator frame
est.
int.
int. est. int. est.

max m kg
radius radius mm mm
0,90 0,1 - - - - - - - - - -
1,30 0,1 - - - - - - - - - -
1,45 0,1 o - - - - - - - - -
1,90 0,5 o • • - o - - - - -
1,90 0,5 o - - - o - - - - -
2,20 1 o - - - o - - - - -
1,70 0,1 - • - - - - - - - -
1,55 0,1 o - - - - - - - - -
1,40 1 - • - - o - - - - -
1,90 1 o - - - o - - - - -
2,30 1 - • - - o - - - - -
2,30 1 o - - - o - - - - -
1,60 1 - • - - o - - - - -
2,20 1 o • • - o - - - - -
3,70 1 o • • - o o o - - -
2,45 1 o • - - o o o - - -
3,80 1 o • - - o o o - - -
4,75 1 o • • - o o o - - -
3,10 1 - • • o o o o o - -
3,90 1 - • • o o o o o - -
4,95 1 - • • o o o o o - -
6,50 1 - • • o o o o o - -
7,00 1 - • • o o o o o - -
1,70 0,5 - • - • o o o - - -
2,10 1 - • • • o o o - - -
3,35 1 - • • • o o o - - -
3,35 1 - • • • o o o - - -
4,45 1 - • • • o o o - - -
2,30 1 - • - • o o o - - -
3,45 1 - • - • o o o - - -
2,70 1 - • • • o o o - - -
4,00 1 - • • • o o o - - -
5,80 1 - - • • o o o - - -
6,00 1 - • • • o o o - - -
- - • • • o o o o o - -
- - • • • o o o o o - -
- - • • • - o o o o - -
7
- - • • • - o o o - - -
- - • • • • o o o - - -
- - • • • - o o o - - -
- - • • • - o o o - - -
- - - • - - - - - - 600 755
- - - • - - o - - - 630 830
- - - • - - • - - - 940 1220
- - - • - - • - - - 1060 1340
- - - • - - • o o - 485 760
- - - • • - • o o - 1400 2000
5,40 1 - - - o o o o • - -
6,20 1 - - - o o o o • - -
9,10 1 - - - o o o o • - -
8,90 1 - - - • o o o - - -
10,50 1 - - - o o o o • - -
9,70 1 - - - • o o o - - -
13,00 1 - - - o o o o • - -
207
All rights reserved. No part of this publication may be reproduced, translated or transmitted in any form or by any means.
All informations contained in this publication should be taken only as a guide for the use of Brevetti Stendalto products; no responsability can be
accepted for any error or omission. Brevetti Stendalto S.p.A. reserved the rights, without notice, to change design and construction of any products.
Printed in May 2009
208
www.brevettistendalto.com
Your local distributor
Brevetti Stendalto S.p.A.

Viale G.B. Stucchi 66/8 - 20052 Monza (Milan) Italy - Tel. +39 039 204901 - Fax +39 039 834250
Internet: www.brevettistendalto.com - E-mail: [email protected]

Brevetti - Esteiras Catalogo Cat E 22

Uploaded by

Copyright:

Available Formats

Brevetti - Esteiras Catalogo Cat E 22

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Brevetti - Esteiras Catalogo Cat E 22

Uploaded by

Copyright:

Available Formats

Cable Chains

Nylon Cable Chains 3

Steel Cable Chains 4

Cable Chain Cables 5

Enquiry and Order Form 6

Overview of Products Range 7

Brevetti Stendalto is the name of the

At that time, Mr.Giovanni Mauri (President

Looking beyond, he got off more than a new

The constant evolution of the Company is

The latter, in particular, is necessary to meet

We in Brevetti believe that some special

We always keep in mind that our customers

So, let’s keep on growing together, still going

Chain complete with cables

Each aspect of production, whether it be the

Nylon cable chains

Steel cable chains

Cable chain cables

Completely automated assembly

Production moulds are

In Brevetti Stendalto the quality is a result of our activities.

1 diversify its proposals. Today, thanks to products

Welding robot equipped Steel chain BS 3000.

SR 318 for long travel distance on

Machine tools equipped with Circular nylon chains on

BS 3500 steel chains with

SR310 plastic chains and

Each Client is important to Brevetti Stendalto

Brevetti Stendalto’s technical

To offer a rapid and always updated commercial

Brevetti Stendalto is always

Necessary data to determine the type of cable chain page 12

The choice of cable chain should not only be

Thanks to thirty years of experience in this

The dimensions of the cable chain in relationship to the

Determining the radius of curvature of the cable chain in

Verifying the self-supporting capacity of the cable chain in

To guarantee that cable chain functions

MIN 10% MIN 20%

For further information on how to install cables/hoses A BS3000 chain in steel

Chains Placed Horizontally

2 technical department. They are at you disposal

Combination of both vertical and horizontal movement. Superimposed chains.

Chain making a ring configuration. Long horizontal - 2 chains

Horizontal with chain mounted on its side

Chains Placed Vertically

Vertical with curve above

SR355 vertical with curve

ROBOT type chain for circular motion.

Robot for welding with chains

Narrowest chain version

Nylon chain, type SR310, in

Fixed point at the centre of total travel.

Fixed point not positioned at the centre of total travel.

Vertical Applications The use of standard cable chains for vertical

Horizontal Applications on Their

For this kind of application, it is recommended to discuss

Particular attention should be drawn to determine the section

In these applications, the