Scribd
Upload
140 views2 pages

Straight&Cross-over Cable Connection

This document discusses straight and crossover cable connections for Ethernet networking. It provides objectives and instructions for making straight and crossover cables, including the different color combinations used for the wire connections for each type of cable. It also discusses tools used for cable crimping and testing cables. The document contains tasks for making straight and crossover cables, along with evaluation criteria for assessing cable connections.

Uploaded by

Michael M. Aguilar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
140 views2 pages

Straight&Cross-over Cable Connection

This document discusses straight and crossover cable connections for Ethernet networking. It provides objectives and instructions for making straight and crossover cables, including the different color combinations used for the wire connections for each type of cable. It also discusses tools used for cable crimping and testing cables. The document contains tasks for making straight and crossover cables, along with evaluation criteria for assessing cable connections.

Uploaded by

Michael M. Aguilar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 2

Straight&Cross-over cable connection

1. 1. Straight and Cross-over Cable Connection Prepared by: Horacio N. Aceveda Jr.
2. 2. Checking of Attendance
3. 3. Review:- Ethernet Cable
4. 4. Objectives: At the end of the session you should be able to: 1. Give the uses of straight
and cross-over cable connection. 2. Identify the color combination of straight and cross-over
cable. 3. Demonstrate the straight and cross-over cable connection. 4. Make a straight and
cross-over cable connection. 5. Appreciate the straight and cross-over cable connection.
5. 5. 1. What are the different tools and materials used in ethernet cabling? Crimping tool, LAN
tester, UTP cable,RJ45,marker, and connector case. 2. What kind of connection presented in
the video? Straight connection 3. How many conductors and colors used in UTP cable? 8
conductors or 4-pairs twist wirings of color combination
6. 6. Pre-Assessment Skills in Electronics(css) Not Much A Little A Lot 1. I know how to use
LAN tester. 2. I can strip/skin the UTP cables. 3. I can crimp RJ45 in UTP cables. 4. I can
apply occupational health and safety precautions while working. 5. I know how to use
crimping tools. 6. I know the color combination for straight and cross-over cable. 7. I know
how to make straight and cross-over cable connection.
7. 7. Pre-Test
8. 8. Pre-Test
9. 9. TASK #1- MAKE A STRAIGHT CABLE CONNECTION 1. Cut the one end of the cable. 2.
Strip/skin the outer sleeve of UTP cable. 3. Arrange the colour combination (see T568B
below). 4. Cut straight the conductors. 5. Insert the wires to RJ45. 6. Insert the RJ45 to crimp
the cables. 7. Test the straight cable.
10. 10. TASK #2- MAKE A CROSS-OVER CABLE CONNECTION 1. Cut the one end of the
cable. 2. Strip/skin the outer sleeve of UTP cable. 3. Arrange the colour combination (see
T568A below). 4. Cut straight the conductors. 5. Insert the wires to RJ45. 6. Insert the RJ45
to crimp the cables. 7. Test the cross-over cable.
11. 11. Unshielded Twisted Pair(UTP) Cable It is composed of 4-pair twist wirings. Orange
Green Blue Brown
12. 12. Color Pin (TIA/EIA 568B) White/Orange 1 Orange 2 White/Green 3 Blue 4 White/Blue 5
Green 6 White/Brown 7 Brown 8 Straight Through Cable A cable used in different devices for
networking like PC to Router.
13. 13. Cross-over cable A cable connection used in the same devices like PC to PC
14. 14. How to wire….. Step 1: Strip back the outer sleeve.
15. 15. How to wire….. Step 2: Arrange in particular Design..
16. 16. How to wire….. Step 2: Cont…. Side A Side B
17. 17. How to wire….. Step 3: Cut every wire in straight line….
18. 18. How to wire….. Step 3: Cont….
19. 19. How to wire….. Step 4: Now Insert Wires into RJ45
20. 20. How to wire….. Step 5: Crimp the RJ45 plug with the crimping tool.
21. 21. How to wire….. Step 6: Verify the order of the wires is correct and all the wires are
correctly making good contact with the metal contacts in the RJ45 plug.
22. 22. How to wire….. Step 7: Cut the cable into suitable length and repeat all the steps for the
other side. And test it…….
23. 23. 1.What is the difference between straight and cross-over cable? 2.What are the proper
sequence of color coded wires in straight cable connection? 3.What are the proper sequence
of color code wires in cross-over cable connection? 4.How do we use the crimping tool and
LAN tester?
24. 24. Application Practicum Make a Cross-over cable connection
25. 25. Evaluation Rubrics of assessment Criteria 20 15 10 5 ACCURACY 20 Shows accurate
performance cable Shows 95% performance cable Shows 90% performance cable Shows
85% performance cable WORKMANSHIP 20 Cables run neatly and tested 2 mistakes are
identified 4 mistakes are identified More than 4 mistakes Identified SPEED 20 Was able
finish the output 10 minutes before the allotted time Was able to finish the output 5 minutes
before the allotted time Was able to finish the output within the time Was not able to finish
the output within the allotted time PROPER HANDLING OF TOOLS 20 Appropriate tools and
equipment were orderly and properly used at all times Was observed not using appropriate
tools and equipment once (scattered) Was observed not using appropriate tools and
equipment twice (scattered) Was observed not using appropriate tools and equipment
thrice/more (scattered) WORK ATTITUDE 20 Observed safety practices at all times
Observed safety practices but were once noted not using appropriate protective gears
Observed safety practices but were twice noted not using appropriate protective gears
Observed safety practices but were thrice/more noted not using appropriate protective gears
TOTAL 100
26. 26. ASSIGNMENT: 1. What is a rollover and loopback cable connection? 2. How do you
make a rollover and loopback cable? 3. What is the use of rollover and loopback cable?
Reference: Internet:www.FreeNetworkPlus.com
27. 27. Reference Wikipedia http://en.wikipedia.org/wiki/Category_5_cable Cat5e Cable
http://www.cat5ecable.co.uk/ How to wire Ethernet Cables
http://www.ertyu.org/steven_nikkel/ethernetcables.html http://www.petri.co.il

You might also like