S355J2
S355J2
S355J2
S355J2 All
General Information
Similar designations
ASt 52, A52 FP, Q420q-D, 1501 Gr.224-460, A52 RBII
Chemical composition
Variant Cast Weldability C% Si % Mn % P% S% V%
CEV 0.5max Min - - - - - -
S355J2(M) CC
Pcm 0.3max Max 0.20 0.55 1.60 0.035 0.040 0.150
Mechanical Properties
Variant Condition Format Dimension [mm] Yield strength min [MPa] Tensile strength [MPa] Elongation A5 [%] Hardness Impact (ISO-V) strengthmin
Flat bar < 16 355** 490-630 22 150-190 HB -20 °C 27 J (long)
Flat bar 17 < 40 345** 490-630 22 150-190 HB -20 °C 27 J (long)
S355J2(M) +AR
Flat bar 41 < 63 335** 490-630 21 150-190 HB -20 °C 27 J (long)
64 < 80 325** 490-630 30 150-190 HB -20 °C 27 J (long)
Rp0.2 * Reh, ** Rel
Transformation temperatures
Temperature °C
MS 400
AC1 720
AC3 815
Contact us
Would you like to know more about our offers? Don´t hesitate to contact us:
Via e-mail: info@ovako.com
Via telephone: +46 8 622 1300
For more detailed information please visit http://www.ovako.com/en/Contact-Ovako/
Disclaimer
The information in this document is for illustrative purposes only. The data and examples are only general recommendations and not a warranty or a guarantee.
The suitability of a product for a specific application can be confirmed only by Ovako once given the actual conditions.The purchaser of an Ovako product has
the responsibility to ascertain and control the applicability of the products before using them. Continuous development may necessitate changes in technical
data without notice. This document is only valid for Ovako material. Other material, covering the same international specifications, does not necessarily comply
with the properties presented in this document.