In-line Weld Testing &
Ambient Isolation Services
Hydratight's qualified and professional technicians provide a safe,
reliable and cost-effective means for the localised pressure testing of
piping. Localised pressure testing is a means of verifying the integrity
of a welded or formed joint or flange installation/weld which has been
made on a piping system. Typically these are made as a repair or
modification of part of a process piping system which is undertaken
during plant shutdown activities.
Hydratight carries tools that, once set in position, provide a verified
vapour barrier allowing hot work activities to take place safely on-site.
Hydratight provides certified
Hydraulic and experienced
Test medium
technicians to perform
activation pump
the job safely and provides operators vent a full turnkey testing package,
delivering a first-class maintenance solution for facility assets.
Features and Benefits:
• Reduces system downtime andVapour increases worksite safety by
monitor Safety
minimising pressure test volume lanyard
• Saves time and reduces cost by limiting the test area to only the new
weld or welded component
• Production levels remain optimal due to shortened system downtimes
• Simple, straightforward installation and operation of in-line weld test
tools; installed and activated in a matter of minutes
• Large, high quality, high performance elastomer seals ensure
a leak tight seal, even in pitted pipework; and provide excellent
radial expansion and relaxation properties, even after many
operating cycles
• Designed
Tangye with generous
Test manifold radial clearance
Chart
recorder
to cope with typical internal
test pump
obstructions such as weld beads, ovality, etc.
• Suitable for use with most test mediums (liquid or gas); no
requirement to flood and de-water gas systems
• No requirement for full system pressurisation; beneficial to ‘mature’
systems by decreasing potential for spading, leakage, etc.
• Suitable for installation in horizontal, vertical and inclined piping
• Robust construction ensures years of trouble-free operation even in
the harshest environments
• Rental-only option available, complete with full ancillary equipment
This service is delivered by fully certified and competent
Hydratight personnel.
In-line Weld Testing & Ambient Isolation Services
Example of typical set-up: horizontal application
Localized Pressure Test
In-Line weld test tool located across the weld to
enable localized butt weld strength and leak test
Test medium
vent
Test pump Test manifold Chart Vapour Hydraulic
recorder monitor activation pump
Max.* Test
Standard*
Type of Tool Image Operation Method Pressure
Hydraulic Size Range
activation pump Test medium (psi)
vent
Hydraulic pressure forces inner
Lightweight, Hydraulic- cylinders out toward end of plug to
101.6mm–406.4mm 2,437
style Weld Testing Tool expand seals. Easy to handle. Quick.
Self centering installation.
Vapour
monitor Safety
lanyard
Hydraulic pressure forces inner cylinders
Steel Hydraulic-style Weld
out toward end of plug to expand seals. 101.6mm–609.6mm 10,000
Testing Tool
Quick. Self centering installation.
Lightweight, Mechanical- Seals in pipe by applying torque to a
19.1mm–609.6mm 2,500
style Weld Testing Tool fastener. Easy to handle.
Tangye Test manifold Chart
test pump recorder
Mechanical installation—installed and
Steel Mechanical-style removed, even where there is severe
19.1mm–914.4mm 2,250
Flange Tester weld protrusion. Allows adjustment of
seal installation depth.
*Larger sizes and higher test pressures available upon request and prior notice
Further details can be obtained from your local Hydratight
representative or via the website hydratight.com. HT_FL_022_0415_UK
