Scribd
Upload
67 views1 page

It Should Combines Mechanism(s) With Power Input

The document outlines minimum requirements for a mechanism design that includes a CAD drawing marking the point of interest and inputs, a kinematic analysis of motion and forces, and materials and sizing of components based on a real application load along with calculations of required power input.

Uploaded by

litrakhan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
67 views1 page

It Should Combines Mechanism(s) With Power Input

The document outlines minimum requirements for a mechanism design that includes a CAD drawing marking the point of interest and inputs, a kinematic analysis of motion and forces, and materials and sizing of components based on a real application load along with calculations of required power input.

Uploaded by

litrakhan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 1

It should combines mechanism(s) with power input.

Minimum requirements:

 CAD drawing. One of the drawings should clearly mark the point of interest, load, input
force/torque etc.
 Kinematic analysis (motion, velocity, acceleration, jerk for cam if a cam is involved).
 Materials and sizing of components (force analysis will be needed). Calculation of needed
force/torque power input.
 The above design/calculation is based on real application load/size.

You might also like