AISC MEMBER DIMENSIONS AND PROPERTIES VIEWER

W, S, M, HP Shapes C, MC Shapes WT, ST, MT Shapes Single Angles

Y Y
k1=0.8125 Y Y
k=1.12 tf=0.62 tf=0.436
bf=5.75 t=0.375
y=1.07 x=2.4
x(bar)=0.634 tf=0.36 d=8 t=1.125
d=10.1 T X d=10 X X
d=5.09 X y=2.4
tw=0.35 tw=0.24 tw=0.24 b=8

bf=8.02 bf=2.6

W10x45 C10x15.3 WT5x11 L8x8x1-1/8

A= 13.30 in.^2 A= 4.48 in.^2 A= 3.24 in.^2 d= 8 in. d=
d= 10.100 in. d= 10.000 in. d= 5.090 in. b= 8 in. b=
tw = 0.350 in. tw = 0.240 in. tw = 0.240 in. t= 1.125 in. t=
bf = 8.020 in. bf = 2.600 in. bf = 5.750 in. k= 1.7500 in. k=
tf = 0.620 in. tf = 0.436 in. tf = 0.360 in. wt./ft. = 57.20 plf. wt./ft. =
T= 7-1/2 in. T= 8 in. k= 0.6600 in. A= 16.80 in.^2 A=
k= 1.1200 in. k= 1.0000 in. Ix = 6.88 in.^4 Ix = 98.10 in.^4 Ix =
k1 = 0.8125 in. gage = 1-1/2 in. Sx = 1.72 in.^3 Sx = 17.50 in.^3 Sx =
gage = 5-1/2 in. x(bar) = 0.634 in. rx = 1.460 in. rx = 2.410 in. rx =
rt = 2.180 in. eo = 0.796 in. y= 1.070 in. y= 2.400 in. y=
d/Af = 2.03 d/Af = 8.81 Iy = 5.71 in.^4 Iy = 98.10 in.^4 ry(0) =
Ix = 248.00 in.^4 Ix = 67.30 in.^4 Sy = 1.99 in.^3 Sy = 17.50 in.^3 ry(3/8) =
Sx = 49.10 in.^3 Sx = 13.50 in.^3 ry = 1.330 in. ry = 2.410 in. ry(3/4) =
rx = 4.320 in. rx = 3.870 in. J= 0.119 in.^4 x= 2.400 in. ro(bar) =
Iy = 53.40 in.^4 Iy = 2.27 in.^4 Cw = 0.107 in.^6 rz = 1.560 in. H=
Sy = 13.30 in.^3 Sy = 1.15 in.^3 a= 1.53 in. TAN(a) = 1.000
ry = 2.010 in. ry = 0.711 in. ro(bar) = 2.16 in. J= 7.13 in.^4
Zx = 54.90 in.^3 J= 0.21 in.^4 H= 0.830 Cw = 32.5 in.^6
 Zy = 20.30 in.^3 Cw = 45.5 in.^6 a= 3.44 in.
J= 1.51 in.^4 a= 23.74 in. ro(bar) = 4.29 in.
Cw = 1200 in.^6 ro(bar) = 4.19 in. H= 0.633 X
a= 45.36 in. H= 0.884
Wno = 19.00 in.^2
Sw = 23.60 in.^4 t=
Qf = 11.30 in.^3 b=
Qw = 27.00 in.^3 wt./ft. =
Reference:
The shapes contained in this database are a A=
compilation of those listed in the current AISC Ix =
"Shapes Database" CD-ROM Version 3.0 (June, Sx =
2001), as well as those listed in the AISC 9th rx =
Edition Manual of Steel Construction (1989). Iy =
Sy =
ry =
J=
NOMENCLATURE FOR AISC MEMBER PROPERTIES AND DIMENSIONS:

A = Cross-sectional area of member (in.^2)

d = Overall depth of member, parallel to X-axis (in.)
tw = Thickness of web of member (in.)
bf = Width of flange of member (in.)
tf = Thickness of flange of member (in.)
T = Distance between fillets for wide-flange or channel shape (in.) = d-(2*k)
k = Distance from outer face of flange to web toe of fillet (in.)
k1 = Distance from web centerline to flange toe of fillet (in.)
gage = Standard gage (bolt spacing) for member (in.) (Note: gages for angles are available by viewing comment box at cell K18.)
rt = Radius of gyration of compression flange plus 1/3 of compression web area, taken about an axis in plane of web (in.)
d/Af = Ratio of of total depth of member to area of compression flange of member = d/(b f*tf)
Ix = Moment of inertia of member taken about X-axis (in.^4)
Sx = Elastic section modulus of member taken about X-axis (in.^3)
rx = Radius of gyration of member taken about X-axis (in.) = SQRT(I x/A)
Iy = Moment of inertia of member taken about Y-axis (in.^4)
Sy = Elastic section modulus of member taken about Y-axis (in.^3)
ry = Radius of gyration of member taken about Y-axis (in.) = SQRT(I y/A)
Zx = Plastic section modulus of member taken about X-axis (in.^3)
Zy = Plastic section modulus of member taken about Y-axis (in.^3)
J = Torsional constant of member (in.^4)
Cw = Warping constant (in.^6)
a = Torsional property, a = SQRT(E*Cw/G*J)
E = Modulus of elasticity of steel = 29,000 ksi
G = Shear modulus of elasticity of steel = 11,200 ksi
Wno = Normalized warping function at a point at the flange edge (in.^2)
Sw = Warping statical moment at a point on the cross section (in.^4)
Qf = Statical moment for a point in the flange directly above the vertical edge of the web (in.^3)
Qw = Statical moment at the mid-depth of the section (in.^3)
x(bar) = Distance from outside face of web of channel shape to Y-axis (in.)
 eo = Horizontal distance from the outer edge of a channel web to its shear center (in.) = (approx.) t f*(d-tf)^2*(bf-tw/2)^2/(4*Ix)-tw/2
xo = x-coordinate of shear center with respect to the centroid of the section (in.)
yo = y-coordinate of shear center with respect to the centroid of the section (in.)
ro(bar) = Polar radius of gyration about the shear center (in.) = SQRT(x o^2+yo^2+(Ix+Iy)/A)
H = Flexural constant, H = 1-(xo^2+yo^2)/ro(bar)^2)
LLBB = Long legs back-to-back for double angles
SLBB = Short legs back-to-back for double angles
STD = Standard weight (Schedule 40) pipe section
XS = Extra strong (Schedule 80) pipe section
XXS = Double-extra strong pipe section
RTIES VIEWER
Double Angles Rectangular HSS

Y
Y
b=5 t=0.349
t=0.375

X
d=3.5 H=8 X

(0, 3/8, or 3/4

gap) B=6

2L5x3-1/2x3/8SLBB HSS8x6x3/8
3.5 in. d= 8 in.
5 in. b= 6 in.
0.375 in. t= 0.349 in.
0.8125 in. wt./ft. = 32.50 plf.
20.80 plf. A= 8.97 in.^2
6.10 in.^2 Ix = 79.10 in.^4
6.31 in.^4 Sx = 19.80 in.^3
2.38 in.^3 rx = 2.970 in.
1.020 in. Iy = 50.60 in.^4
0.854 in. Sy = 16.90 in.^3
2.260 in. ry = 2.380 in.
2.390 in. Zx = 24.10 in.^3
2.540 in. Zy = 19.80 in.^3
2.56 in. J= 100.00 in.^4
0.933
Round HSS & Pipes
Y
Plates t=0.322
 Y
t=0.375
O.D.=8.63 X
b=12
I.D.=7.98
3/ 8 in.
12 in. PIPE8STD
15.31 plf. O.D. = 8.63 in.
4.500 in.^2 I.D. = 7.98 in.
0.053 in.^4 t= 0.322 in.
0.281 in.^3 wt./ft. = 28.60 plf.
0.108 in. A= 8.40 in.^2
54.000 in.^4 I= 72.50 in.^4
9.000 in.^3 S= 16.80 in.^3
3.464 in. r= 2.940 in.
54.053 in.^4 J= 145.00 in.^4