Scribd
Upload
256 views

Communication Systems Tutorial

This document provides problems related to amplitude modulation (AM) communication systems. It includes problems analyzing the spectrum and time domain expressions of double sideband suppressed carrier (DSB-SC) and AM signals for various message signals. It also includes a problem analyzing the envelope detector used to demodulate an AM signal.

Uploaded by

Shyam Shankar
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
256 views

Communication Systems Tutorial

This document provides problems related to amplitude modulation (AM) communication systems. It includes problems analyzing the spectrum and time domain expressions of double sideband suppressed carrier (DSB-SC) and AM signals for various message signals. It also includes a problem analyzing the envelope detector used to demodulate an AM signal.

Uploaded by

Shyam Shankar
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

EE3005: Communication Systems

Problem Set 4: Amplitude Modulation

π

1. Consider a message signal m(t) = 2 cos 2πt + 4 .
(a) Sketch the spectrum Up (f ) of the DSB-SC signal up (t) = 8m(t) cos 400πt. What is the power of
up ?
(b) Carefully sketch the output of an ideal envelope detector with input up . On the same plot, sketch
the message signal m(t).
(c) Let vp (t) denote the waveform obtained by high-pass filtering the signal u(t) so as to let through
only frequencies above 200 Hz. Find vc (t) and vs (t) such that we can write

vp (t) = vc (t) cos 400πt − vs (t) sin 400πt

and sketch the envelope of vp .

2. A message to be transmitted using AM is given by

m(t) = 3 cos 2πt + 4 sin 6πt

where the unit of time is milliseconds. It is to be sent using a carrier frequency of 600 KHz.

(a) What is the message bandwidth? Sketch its magnitude spectrum, clearly specifying the units
used on the frequency axis.
(b) Find an expression for the normalized message mn (t).
(c) For a modulation index of 50%, write an explicit time domain expression for the AM signal.
(d) What is the power efficiency of the AM signal?
(e) Sketch the magnitude spectrum for the AM signal, again clearly specifying the units used on the
frequency axis.
(f) The AM signal is to be detected using an envelope detector (as shown in Figure 4.1), with R = 50
ohms. What is a good range of choices for the capacitance C?
3. Consider a message signal m(t) = cos(2πfm t + φ), and a corresponding DSB-SC signal up (t) =
Am(t) cos 2πfc t, where fc > fm .
(a) Sketch the spectra of the corresponding LSB and USB signals (if the spectrum is complex- valued,
sketch the real and imaginary parts separately).
(b) Find explicit time domain expressions for the LSB and USB signals.

4-1
4-2 Tutorial 4: Amplitude Modulation

+ +

Passband Envelope detector


vin (t) R C vout (t)
AM signal output

− −

Figure 4.1: Envelope detector demodulation of AM, used in problem 2.

You might also like