Automatic Sheet Metal Feeding and Cutting Machine

Download as doc, pdf, or txt
Download as doc, pdf, or txt
You are on page 1of 5

AUTOMATIC SHEET METAL FEEDING AND CUTTING

MACHINE

SYNOPSIS

The sheet metal cutting process is a main part of the all industries. Normally the

sheet metal cutting machine is manually hand operated one for medium and small scale

industries. In our project is “AUTOMATIC SHEET METAL FEEDING AND

CUTTING MACHINE”.

Automation in the modern world is inevitable. Any automatic machine aimed at

the economical use of man, machine, and material worth the most. In our project is

solenoid valve is used for automation.

The sheet metal cutting machine works with the help of pneumatic double acting

cylinder. The piston is connected to the moving cutting tool. It is used to cut the small

size of sheet metal. The machine is portable in size, so easy transportable.

INTRODUCTION

This is an era of automation where it is broadly defined as replacement of manual

effort by mechanical power in all degrees of automation. The operation remains an

essential part of the system although with changing demands on physical input as the

degree of mechanization is increased.

Degrees of automation are of two types, viz.

Full automation.

Semi automation.
In semi automation a combination of manual effort and mechanical power is required

whereas in full automation human participation is very negligible.

Need For Automation

Automation can be achieved through computers, hydraulics, pneumatics, robotics,

etc., of these sources, pneumatics form an attractive medium for low cost automation.

The main advantages of all pneumatic systems are economy and simplicity. Automation

plays an important role in mass production.

 Reduction of lab our and material cost

 Reduction of overall cost

 Increased production

 Increased storage capacity

 Increased safety

 Reduction in fatigue

 Improved personnel comfort

WORKING PRINCIPLE

The compressed air from the compressor is used as the force medium for this

operation. There are pneumatic double acting cylinders, solenoid valve; flow control

valve and timer unit used .The arm from the compressor enters to the flow control Valve.

The controlled air from the flow control valve enters to the solenoid valve. The function
of solenoid valves all of air correct time interval. The 5/2 solenoid valve is used. In one

position air enter to the cylinder and pusses the piston, so that the cutting stroke is

obtained. The next position air enters to the other side of cylinder and pusses the piston

return back, so that the releasing stroke is obtained. The speed of the cutting and releasing

stroke is varied by the timer control unit circuit.

APPLICATIONS

This machine is very useful for small scale industries

This machine is used to cut the roller sheet metal

All Industrial Application

DISADVANTAGES

 While working, the compressed air produces noise therefore a silencer may

be used.

 High torque can not be obtained

 Load carrying capacity of this unit is not very high.(<50 N)

ADVANTAGES

 The pneumatic is more efficient in the technical field

 Quick response is achieved

 Simple in construction

 Easy to maintain and repair


 Cost of the unit is less when compared to other machine

 No fire hazard problem due to over loading

 Comparatively the operation cost is less

 The operation of cutting is faster because the medium used to operate is air

 Continuous operation is possible without stopping

You might also like