Scribd
Upload
702 views1 page

Welder Performance Qualification (WPQ) According To ASME IX Hassan Hussien

1) This document qualifies welder Hassan Hussien to perform welds according to procedure SAILO-01/2017 for the Sokhna Fertilizer Complex project in Egypt. 2) The welder was qualified using the shielded metal arc welding (SMAW) process in the 2G, 3G welding positions with a filler metal E7018 on steel plates of grade S 355JR with a minimum thickness of 15mm. 3) The welder passed visual and bend tests to be qualified for unlimited thickness welds in all positions on plate and pipe over 24 inches in diameter.

Uploaded by

Mahmoud shawky
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
702 views1 page

Welder Performance Qualification (WPQ) According To ASME IX Hassan Hussien

1) This document qualifies welder Hassan Hussien to perform welds according to procedure SAILO-01/2017 for the Sokhna Fertilizer Complex project in Egypt. 2) The welder was qualified using the shielded metal arc welding (SMAW) process in the 2G, 3G welding positions with a filler metal E7018 on steel plates of grade S 355JR with a minimum thickness of 15mm. 3) The welder passed visual and bend tests to be qualified for unlimited thickness welds in all positions on plate and pipe over 24 inches in diameter.

Uploaded by

Mahmoud shawky
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 1

Welder Performance Qualification (WPQ)

CONTRACTOR: INTECSA INDUSTRIAL/HASSAN ALLAM OWNER: EL-NASR CO. FOR INTERMEDIATE CHEMICALS (NCIC)
PROJECT: FERTILIZER COMPLEX IN SOKHNA (FCS) LOCATION: AIN-SOKHNA, SUEZ, EGYPT
DOC NO: : NCIC-FCS-4G000-CHO-PQC-0008-0003 REV: 01 PAGE: 1 of 1

Welder Performance Qualification (WPQ) According to ASME IX


Welders Name Hassan Hussien Identification No. WR.5
Test Description
Identification of WPS followed SAILO-01/2017 Test Coupon Production weld

Specification and type/grade or UNS number of base metal(s) EN 10025-2/ S 355JR Thickness: 15mm

Testing Conditions and Qualification Limits


Welding Variables (QW-350) Actual values Range qualified
Welding process (es) SMAW SMAW
Type (i.e., manual, semi-automatic) used Manual Manual
Backing (with/without) With With
Ø Flat Groove≥73mm,
Plate Pipe (enter diameter, if pipe or tube) Not Applicable Ø Overhead Groove >610mm,
FW: All Ø
Base metal P-Number to P- Number P1 to P1 P1 - P15F/ P34 and P 41- P49
Filler metal or electrode specification(s) (SFA) (info only) SFA 5.1/ E7018 SFA 5.1/ E7018
Filler metal or electrode classification(s) (info only) AWS A5.1/ E7018 AWS A5.1/ E7018
Filler metal F-Number(s) FN°4 FN°1 to FN°4
Consumable insert (GTAW or PAW) Not Applicable Not Applicable
Filler Metal Product Form (solid/metal or flux cored/powder (GTAW or PAW) Not Applicable Not Applicable
Deposit thickness for each process
Process 1: SMAW 3 layers minimum Yes No 15 Unlimited
Process 2: 3 layers minimum Yes No Not Applicable Not Applicable
Plate+Pipe>24" All
Welding Position (s) 2G,3G
Pipe 2 7/8"<24"F&H
Vertical progression (uphill or downhill) Uphill Uphill
Type of fuel gas (OFW) Not Applicable Not Applicable
Inert gas backing (GTAW, PAW, GMAW) Not Applicable Not Applicable
Transfer mode (spray/globular or pulse to short circuit –GMAW) Not Applicable Not Applicable
GTAW current type/polarity (AC, DCEP, DCEN) Not Applicable Not Applicable
RESULTS

Visual Examination of Completed Weld (QW-302.4) Satisfactory

Transverse face and root bends [QW-462.3 (a)]; Longitudinal bends [QW-462.3 (b)]; Side bends (QW-462.2)
Pipe bend specimen, corrosion-resistant weld metal overlay [QW-462.5(c)]
Plate bend specimen, corrosion-resistant weld metal overlay [QW-462.5 (d)];
Pipe specimen macro test for fusion [QW-462.5 (b)]; Plate specimen macro test for fusion [QW-462.5 (e)];

Type Result Type Result Type Result

Alternative Ultrasonic examination results (QW-191) RT UT (check one)


Fillet weld -- Fracture test (QW- Length and percent of defects
181.2)
Fillet welds in plate [QW-462.4(b)] Fillet welds in pipe [QW-462.4(c)
Macro examination (QW-184) Fillet size (in.): X Concavity/convexity
(in.):
Other tests
Film or specimens evaluated by: EL-Sayed Metwally Company GAC

Mechanical tests conducted by: Laboratory Test Number


Welding supervised by Mahmoud shawky

We certify that the statements in this record are correct and that the test coupons were prepared welded and tested in accordance with the requirements of
Section IX of the ASME Code.
NILCON QC: Mahmoud shawky INTECSA: Contractor: Date : 31/10/2017

You might also like