ACI library at San Jose State University

SP - Publications
SP-1 Concrete Primer

SP-2(07) ACI Manual of Concrete Inspection

SP-4 Formwork for Concrete, Seventh Edition

SP-15(72) Specification for Structural Concrete for buildings, ACI 301-72

(Field Reference Manual)

SP-15(72) Specification for Structural Concrete for Buildings, ACI 301-72

(Field Reference Manual)

SP-15(73) Specification for Structural Concrete for Buildings, ACI 301-72

(Revised 1973) (Field Reference Manual)

SP-15(75) Specification for Structural Concrete for Buildings, ACI 301-72

(Revised 1975) (Field Reference Manual)

SP-15(88) Specification for Structural Concrete for Buildings, ACI 301-84

(Revised 1988) (Field Reference Manual)

SP-15(89) Specification for Structural Concrete for Buildings, ACI 301-89

(Field Reference Manual)

SP-15(10) Specifications for Structural Concrete ACI 301-10

(Field Reference Manual)

SP-17(09) Design Handbook (Design of Structural Reinforced Concrete Elements in Accordance

With ACI 318-05)

SP-17(73) Design Handbook, Volume 1

(In Accordance with the Strength Design Method of ACI 318-27)

SP-17(73) Design Handbook, Volume 1

(In Accordance with the Strength Design Method of ACI 318-27)

SP-17(73) Design Handbook, Volume 1

(In Accordance with the Strength Design Method of ACI 318-71)

SP-17(73) (S) Slab Design, Supplement to Design Handbook Volume 1

(In Accordance with ACI 318-77)

Created by Rushikesh Mahale

 ACI library at San Jose State University
SP-17(81) Design Handbook, Volume 1; Beams, Slabs, Brackets, Footings, and Pile
Caps. (In Accordance with ACI 318-77)

SP-17(84) Design Handbook, Volume 1; Beams, Slabs, Brackets, Footings, and Pile
Caps. (In Accordance with ACI 318-83)

SP-17(84)(S) Design Of Two-Way Slabs, Supplement To Design Handbook Volume 1

(In Accordance with Strength Design Method of ACI 318-83)

SP-17A(78) Design Handbook, Volume 2; Columns

(In Accordance with ACI 318-77)

SP-17A(85) Design Handbook, Volume 2; Columns

(In Accordance with ACI 318-83)

SP-27 Designing for Effects of Creep and Shrinkage Temperature In Concrete

Structures

SP-28 Concrete Thin Shells

SP-30 Cracking, Deflection, and Ultimate Load of Concrete Slab Systems

SP-32 Menzel Symposium on High Pressure Steam Curing

SP-33 Impact of Computers on the Practice of Structural Engineering In Concrete

SP-35 Analysis of Structural Systems for Torsion

SP-39 Behavior of Concrete Under Temperature Extremes

SP-48 Industrialization in Concrete Building Construction

SP-55 Douglas McHenry International Symposium on Concrete and Concrete

Structures

SP-58 Polymers in Concrete, International Symposium

SP-59 Concrete Design: U.S. and European Practices

(ACI-CEB-PCI-FIP Symposium)

SP-63 Reinforced Concrete Structures Subjected To Wind and Earthquake Forces

SP-66 ACI Detailing Manual – 1980

Created by Rushikesh Mahale

 ACI library at San Jose State University

SP 66(04) ACI Detailing Manual _ 2004

SP-66(88) ACI Detailing Manual – 1988

SP-69 Applications of Polymer Concrete

SP-70 Joint Sealing and Bearing Systems for Concrete Structures, Volume 1

SP-70 Joint Sealing and Bearing Systems for Concrete Structures, Volume 2

SP-71(02) ASTM STANDARDS IN ACI 318

SP-71(05) ASTM STANDARDS IN ACI 301 and 318

SP-71(84) ASTM STANDARDS IN ACI 301, 318, AND 349

SP-72 Significant Developments in Engineering Practice and Research,

A Tribute to Chester P. Siess

SP-73 Dynamic Modeling of Concrete Structures

SP-74 Monolithic Refractories

SP-79 Fly Ash, Silica Fume, Slag and Other Mineral By-Products in Concrete,
Volume 2

SP-84 Earthquake Effects on Reinforced Concrete Structures US – Japan Research

SP-86 Deflections of Concrete Structures

SP-90 Forming Economical Concrete Buildings

Proceedings of the Second International Conference

SP-93 Concrete in Transportation

SP-95 Properties of Concrete at Early Ages

SP-97 Analysis and Design of High Rise Concrete Buildings

SP-103 Anchorage to Concrete

SP-110 Hyperbolic Paraboloid Shells State-of-the-Art

Created by Rushikesh Mahale

 ACI library at San Jose State University

SP-113 Cracking in Prestressed Concrete Structures

SP-115(89) Specifications for Masonry Structures

SP-115(92) Specifications for Masonry Structures, ACI 530.1-92/ASCE 6-92/TMS 602-92

(Reference Manual with ASTM References

SP-116 Polymers in Concrete: Advances and Applications

SP-120 External Prestressing in Bridges

SP-123 Design of Beam-Column Joints for Seismic Resistance

SP-124 Thin-Section Fiber Reinforces Concrete and Ferrocement

SP-127 Earthquake-Resistant Concrete Structures, Inelastic Response and Design

SP-130 Anchors in Concrete – Design and Behavior

SP-131 Durability of Concrete G.M. Idorn International Symposium

SP-133 Designing Concrete Structures for Serviceability and Safety

SP-134 Concrete Design Based on Fracture Mechanics

SP-160 Seismic Rehabilitation of Concrete Structures

SP-162 Mete A. Sozen Symposium – A Tribute from His Students

SP-182 Structural Applications of Fiber Reinforced Concrete

SP-183 The Design of Two-Way Slabs

SP-196 Composite and Hybrid Systems

SP-197 Behavior and Design of concrete streets for Seismic Performance (New)

SP-199 Seventh Canment/ACI Fly Ash, Silica Fume, Slag and Natural Pozzolans in Concrete,
2001 Volume 1

SP-199 Seventh Canment/ACI Fly Ash, Silica Fume, Slag and Natural Pozzolans in Concrete,
2001 Volume 2

Created by Rushikesh Mahale

 ACI library at San Jose State University

SP-200 Fifth Canment/ACI International Conference on Recent Advances in Concrete

Technology

SP-201 Fracture Mechanics for Concrete Materials: Testing and Applications

SP-202 Third Canment/ACI International Symposium on Sustainable Development of

Cement and Concrete

SP- 203 Code Provisions for Deflection Control in concrete structures

SP-204 Design and Construction Practice to Mitigate Cracking

SP-205 Finite Element Analysis of Reinforced Concrete Structures

SP-206 Concrete Material Science to Application

SP- 207 High Performance Concrete

SP-208 Examples for the Design of Structural Concrete with Strut and Tie Models (2 copies)

SP- 209 Innovations in Design with Emphasis on Seismic, wind, and Environmental Loading;
Quality Control and Innovations in Materials/Hot-Weather Concretin

SP-210 Deflection Control for the future

SP- 211 Large-Scale Structural Testing

SP- 212 Sixth Canmet/ACI International Conference on Durability of Concrete

SP-213 The Art and Science of Structural Concrete Design

SP-214 Polymers in Concrete: The First Thirty Years

SP-215 Field Applications of FRP Reinforcement: Case Studies

SP-216 Innovations in Fiber-Reinforced Concrete for Value

SP-217 Seventh Canmet/ACI

SP-218 High Performance Structural Lightweight Concrete

SP-219 Recycling Concrete and Other Materials for Sustainable Development

Created by Rushikesh Mahale

 ACI library at San Jose State University
SP-220 Autogenous Deformation of Concrete

SP-221 2004 Eighth Canmet: Flyash, Silica Fume, Slag, and Natural Pozzolans in Concrete

SP-222 2004 Seventh Canmet/ ACI Recent Advances in Concrete Technology

SP-223 Investigating Concrete: Selected works of Bryant and Katherine Mather

SP-224 Thin Reinforcement Cement-Based Products and Construction Systems

SP-225 Serviceability of Concrete, A Symposium Honoring Dr. Edward G. Nawy

SP-226 Autoclaved Aerated Concrete-Properties and Structural Design

SP-227 Shrinkage and Creep of Concrete

SP-228 Seventh International Symposium on the Utilization of High-Strength/High-

Performance Concrete (Volume I)
SP-228 Seventh International Symposium on the Utilization of High-Strength/High-
Performance Concrete (Volume II)

SP-231 Historic Innovations in Prestressed Concrete

SP-249 Landmark Papers on Concrete Materials Research

SP-250 Textile-Reinforced Concrete (CD)

SP-251 Design and Applications of Textile Reinforced Concrete (CD)

SP-252 Health Monitoring Systems and Sensors for Assessing Concrete (CD)

SP-253 Fifth ACI/CANMET/IBRACON: International Conference on High-Performance

Concrete Structures and Materials (CD)

SP-255 Designing Concrete Structures for Fire Safety (CD)

SP-257 FRP Stay-in-Place Forms for Concrete Structures (CD)

SP-258 Seismic Strengthening of Concrete Buildings using FRP Composites (CD)

SP-259 Transition from Fluid to Solid: Re-examining the behavior of Concrete at (CD)
Early Ages (CD)

Created by Rushikesh Mahale

 ACI library at San Jose State University

SP-260 Fabrication Technologies for Thin Cementitious Products (CD)

SP-261 Recent Advances in Concrete Technology and Sustainability Issues

SP-262 Superplasticizers and other Chemical Admixtures in Concrete

SP-263 Slag Cement Concrete (CD)

SP-264 Serviceability of Concrete Members Reinforced with Internal/External FRP

Reinforcement (CD)

SP-265 Thomas T.C. Hsu Symposium – Shear and Torsion in Concrete Structures (CD)

SP-266 Modeling as a Solution to Concrete Problems (CD)

SP-267 Nanotechnology of Concrete: The Next Big Thing Is Small (CD)

SP-268 Fiber-Reinforced Concrete in Practice (CD)

SP-269 Concrete: The Sustainable Material Choice (CD)

SP-270 Advances in the Material Science of Concrete (CD)

SP-271 Structural Concrete in Performance-Based Seismic Design of Bridges (CD)

SP-273 Further Examples for the Design of Structural Concrete with Strut-and-Tie Models

SP-275 Fiber-Reinforced Polymer Reinforcement for Concrete Structures

SP-276 Durability Enhancements in Concrete with Fiber Reinforcement

SP-277 Recent Advances in Maintenance and Repair of Concrete Bridges

SP-278 Frontiers in the Use of Polymers in Concrete

SP-279 Innovations in Fire Design of Concrete Structures

SP-285 Concrete Construction and Structural Evaluation

SP-286 A Fracture Approach for FRP-Concrete Structures

SP-287 Recent Development in Reinforced Slab Analysis, Design, and Serviceability

Created by Rushikesh Mahale

 ACI library at San Jose State University
ACI - Publications
ACI 104-71 Preparation of Notation for Concrete (ACI 104-71) (Revised 1982)

ACI 104-71 Preparation of Notation for Concrete (ACI 104-71) (Revised 1982)

ACI 117-06 Specification for Tolerances for Concrete Construction and Materials and
Commentary

ACI 117-10 Specification for Tolerances for Concrete Construction and Materials (ACI
117-10) and Commentary (An ACI Standard)

ACI 117-81 Standard Tolerances for Concrete Construction and Materials

(ACI 117-81)

ACI 117-90 Standard Tolerances for Concrete Construction and Materials

(ACI 117-90) and Commentary (ACI 117R-90)

ACI 121R-04 Quality Management System for Concrete Construction

ACI 121R-08 Guide for Concrete Construction Quality Systems in Conformance with ISO
9001

ACI 121R-98 Quality Management System for Concrete Construction

ACI 122R-02 Guide to Thermal Properties of Concrete and Masonry Systems

ACI 201 Guide to Durable Concrete

ACI 201.1R-08 Guide for Conducting a Visual Inspection of Concrete in Service

ACI 201.2R-92 Guide to Durable Concrete

ACI 201.2R-01 Guide to Durable Concrete

ACI 201.3R-86 Guide for Making a Condition Survey of Concrete Pavements

ACI 207.1R-05 guide to mass concrete

ACI 207.1R-87 Mass Concrete

ACI 207.5R-11 Report on Roller-Compacted Mass Concrete

ACI 209R-92 Prediction of Creep, Shrinkage and Temperature Effects in Concrete

Created by Rushikesh Mahale

 ACI library at San Jose State University
Structures

ACI 209.1R-05 Report on Factors Affecting Shrinkage and Creep of Hardened Concrete

ACI 211.1-74 Recommended Practice for Selecting Proportions for Normal and
Heavyweight Concrete (ACI 211.1-74)

ACI 211.1-74 Recommended Practice for Selecting Proportions for Normal and
Heavyweight Concrete (ACI 211.1-74) (Revised 1975)

ACI 211.1-77 Recommended Practice for Selecting Proportions for Normal and
Heavyweight Concrete (ACI 211.1-77)

ACI 211.1-81 Standard Practice for Selecting Proportions for Normal, Heavyweight

and Mass Concrete (ACI 211.1-81)

ACI 211.2-69 Recommended Practice for Selecting Proportions for Structural

Lightweight Concrete (ACI 211.2-69) (Revised 1977)

ACI 211.2-81 Standard Practice for Selecting Proportions for Structural Lightweight
Concrete (ACI 211.2-81)
ACI 211.3-75 Standard Practice for Selecting Proportions for No-Slump Concrete
(ACI 211.3-75) (Revised 1987) (Reapproved 1992)

ACI 211.3R-02 Guide for Selecting Proportions for No-Slump Concrete

ACI 211.4R-08 Guide for Selecting Proportions for High-Strength Concrete Using Portland
Cement and Other Cementitious Materials

ACI 211.5R-01 Guide for Submittal of Concrete Proportions

ACI 212.1R-81 Admixtures for Concrete and Guide for Use of Admixtures in Concrete
ACI 212.2R-81

ACI 212.3R-04 Chemical Admixtures for Concrete

ACI 212.3R-91 Chemical Admixtures for Concrete

ACI212.4R-04 Guide for the Use of High-Range Water-Reducing admixtures

(Superplasticizers) in Concrete

ACI 213R-03 Guide for Structural Lightweight-Aggregate Concrete

Created by Rushikesh Mahale

 ACI library at San Jose State University

ACI 213R-79 Guide for Lightweight Aggregate Concrete

ACI 214-77 Recommended Practice for Evaluation of Strength Test Results of

Concrete (ACI 214-77)

ACI 214R-02 Evaluation of Strength Test Results of Concrete

ACI 214.4R-03 Guide for Obtaining Cores and Interpreting Compressive Strength Results

ACI 214R-11 Guide to Evaluation of Strength Test Results of Concrete

ACI 214.4R-10 Guide for Obtaining Cores and Interpreting Compressive Strength Results

ACI 215R-74 Considerations for Design of Concrete Structures Subjected to Fatigue

Loading

ACI 216R-81 Guide for Determining the Fire Endurance of Concrete Elements

ACI 221.1R-98 State-of-the-Art Report on Alkali – Aggregate Reactivity

ACI 222R-01 Protection of Metals in Concrete Against Corrosion

ACI 222.2R-01 Corrosion of Prestressing Steels

ACI 222.3R-03 Design and Construction Practice to Mitigate Corrosion of Reinforcement in

Concrete Structures

ACI 222.3R-11 Guide to Design and Construction Practices to Mitigate Corrosion of

Reinforcement in Concrete Structures

ACI 223-77 Recommended Practice for the Use of Shrinkage-Compensating

Concrete (ACI 223-77)

ACI 223-83 Standard Practice for the Use of Shrinkage-Compensating Concrete

(ACI 223-83)

ACI 223-90 Standard Practice for the Use of Shrinkage-Compensating Concrete

(ACI 223-90)

ACI 223-98 Standard Practice for the Use of Shrinkage-Compensating Concrete

ACI 224R-01 Control of Cracking in Concrete Structures

Created by Rushikesh Mahale

 ACI library at San Jose State University
ACI 224R-80 Control of Cracking in Concrete Structures

ACI 224.1R-07 Causes, Evaluation, and Repair of Cracks in Concrete Structures

ACI 224.2R-92 Cracking of Concrete Members in Direct Tension

ACI 225R-85 Guide to the Selection and Use of Hydraulic Cements

ACI 226.1R-87 Ground Granulated Blast-Furnace Slag as a Cementitious Constituent

in Concrete

ACI 226.3R-87 Use of Fly Ash in Concrete

ACI 228.1R-03 In-Place Methods to Estimate Concrete Strength

ACI 228.1R-89 In-Place Methods for Determination of Strength of Concrete

ACI 230.1R-90 State-of-the-Art Report on Soil Cement

ACI 230.1R-09 Report on Soil Cement

ACI 231R-10 Report on Early-Age Cracking: Causes, Measurement, and Mitigation

ACI 232.2R-03 Use of Flyash in Concrete

ACI 233R-03 Slag Cement in Concrete and Mortar

ACI 234R-96 Guide for the Use of Silica Fume in Concrete

ACI 238.1R-08 Report on Measurements of Workability and Rheology of Fresh Concrete

ACI 301-05 Specifications for Structural Concrete (An ACI Standards)

ACI 301-72 Specifications for Structural Concrete for Buildings (ACI 301-72)
(Revised 1973)

ACI 301-72 Specifications for Structural Concrete for Buildings (ACI 301-72)
(Revised 1973)

ACI 301-72 Specifications for Structural Concrete for Buildings (ACI 301-72)
(Revised 1981)

ACI 301-84 Specifications for Structural Concrete for Buildings (ACI 301-84)

Created by Rushikesh Mahale

 ACI library at San Jose State University
ACI 301-84 Specifications for Structural Concrete for Buildings (ACI 301-84)
(Revised 1988)

ACI 301-89 Specifications for Structural Concrete for Buildings (ACI 301-89)

ACI 301-99 Specifications for Structural Concrete for Buildings (ACI 301-99)

ACI 302-69 Recommended Practice for Concrete Floor and Slab Construction

ACI 302.1R-04 Guide for Concrete Floor and Slab Construction

ACI 302.1R-96 Guide for Concrete floor and Slab Construction

ACI 303R-04 Guide to Cast-in-Place Architectural Concrete Practice

ACI 303R-12 Guide to Cast-in-Place Architectural Concrete Practice

ACI 303R-91 Guide to Cast-in-Place Architectural Concrete Practice

ACI 303R-91 Guide to Cast-in-Place Architectural Concrete Practice

ACI 304.1R-92 Guide for the Use of Preplaced Aggregate Concrete for Structural and
Mass Concrete Applications

ACI 304.6R-09 Guide for Use of Volumetric-Measuring and Continuous-Mixing Concrete

Equipment

ACI 305 Hot Weather Concreting

ACI 350R-10 Guide to Hot Weather Concreting

ACI 305R-89 Hot Weather Concreting

ACI 305.1-06 Specification for Hot Weather Concreting.

ACI 306 Cold Weather Concreting

ACI 306R-88 Cold Weather Concreting

ACI 306.1-87 Standard Specification for Cold Weather Concreting (ACI 306.1-87)

ACI 306.1-90 Standard Specification for Cold Weather Concreting (ACI 306.1-90)

Created by Rushikesh Mahale

 ACI library at San Jose State University
ACI 307-08 Code Requirements for Reinforced Concrete Chimneys (ACI 307-08) and
Commentary

ACI 307-79 Specification for the Design and Construction of Reinforced Concrete
Chimneys (ACI 307-79)

ACI 307-98 Design and Construction of Reinforced concrete Chimneys

ACI 307R-98 (ACI 307-98) and Commentary (ACI 307R-98)

ACI 308-71 Recommended Practice for Curing Concrete (ACI 308-71)

ACI 308-81 Standard Practice for Curing Concrete (ACI 308-81) (Revised 1986)

ACI 308-92 Standard Practice for Curing Concrete (ACI 308-92)

ACI 308R-01 Guide to Curing Concrete

ACI 308.1-11 Specifications for Curing Concrete

ACI 309-72 Standard Practice for Consolidation of Concrete (ACI 309-72)

(Revised 1982)

ACI 309R-05 Guide for Consolidation of Concrete

ACI 309.1R-08 Report on Behavior of Fresh Concrete During Vibration

ACI 309.1R-93 Behavior of Fresh Concrete During Vibration

ACI 309.2R-82 Identification and Control of Consolidation-Related Surface Defects in

Formed Concrete

ACI 309.2R-98 Identification and Control of Visible Effects of Consolidation on

Formed Concrete Surfaces

ACI 309.2R-98 Identification and Control of Visible Effects of Consolidation on

Formed Concrete Surfaces

ACI 311.4R-00 Guide for Concrete Inspection

ACI 311.5-04 Guide for Concrete Plant Inspection and Testing of Ready-Mixed Concrete

ACI 311.5R-02 Guide for Concrete Plant Inspection and Testing or Ready-Mixed Concrete

ACI 311.5R-97 Guide for concrete Plant Inspection and Field Testing of Ready-Mixed

Created by Rushikesh Mahale

 ACI library at San Jose State University

ACI 311.6-09 Specification for Ready Mixed Concrete Testing Services

(An ACI Standard)

ACI 313-77 Recommended Practice for Design and Construction of Concrete Bins,
Silos and Bunkers for Storing Granular Materials (ACI 313-77) and
Commentary

ACI 313-77 Recommended Practice for Design and Construction of Concrete Bins,
ACI 313R-77 Silos, and Bunkers for Storing Granular Materials (ACI 313-77)
(Revised 1983) and Commentary (ACI 313R-77)

ACI 313-91 Recommended Practice for Design and Construction of Concrete Bins,
ACI 313R-91 Silos, and Bunkers for Storing Granular Materials (ACI 313-91)
and Commentary (ACI 313R-91)

ACI 316-74 Recommended Practice for Construction of Concrete Pavements and

Concrete Bases (ACI 316-74) (Revised 1975)

ACI 316R-82 Recommendations for Construction of Concrete Pavements and

Concrete Bases

ACI 318-02 Seminar Notes on ACI 318-02 Code Revisions

ACI 318-11 Building Code Requirements for Structural Concrete

ACI 318-71 Step-by-Step Design Procedures in Accordance with the Strength

Design Method of ACI 318-71

ACI 318-71 Proceedings of the PCA-ACI Teleconference on ACI 318-71 Building Code
Requirements

ACI 318-77 Building Code Requirements for Reinforced Concrete (ACI 318-77)

ACI 318-83 Building Code Requirements for Reinforced Concrete (ACI 318-83)

ACI 318-83 Building Code Requirements for Reinforced Concrete (ACI 318-83)
(Revised 1986)

ACI 318R-83 Commentary on Building Code Requirements for Reinforced Concrete

(ACI 318-83)

ACI 318-83 1986 Supplement to: Building Code Requirements for Reinforced

Created by Rushikesh Mahale

 ACI library at San Jose State University
ACI 318M-83 Concrete (ACI 318-83) and Commentary (ACI 318 M-83)

ACI 318.1-83 Building Code Requirements for Structural Plain Concrete

ACI 318.1R-83 (ACI 318.1-83) and Commentary (ACI 318.1R-83)

ACI 318.1-89 Building Code Requirements for Structural Plain

ACI 318.1R-89 Concrete (ACI 318.1-89) and Commentary (ACI 318.1R-89)

ACI 318.1-89 Building Code Requirements for Structural Plain Concrete

ACI 318.1R-89 (ACI 318.1-89) (Revised 1992) and Commentary (ACI 318.1R-89)

ACI 318-99 Notes on (ACI 318-99) Building Code Requirements for Structural Concrete

ACI 318-99 Seminar Notes on ACI 318-99 Code Revisions

ACI 318-99 Building Code Requirements for Structural Concrete (ACI 318-99)
ACI 318R-99 and Commentary (318R-99)

ACI 318-99 Notes on ACI 318-99 Building Code Requirements for Structural Concrete
with design applications

ACI 318M-02 Building Concrete Requirement for Structural Concrete

ACI 318 RM-02 ACI 318M-02& commentary (ACI 318 RM-02)

ACI 318-02 Building Code Requirements

ACI 318-02 Building Code Requirements for Structural Concrete (ACI 318-99)
ACI 318R-02 and Commentary (ACI 318R-02)

ACI 318-02 Building Code Requirements for Structural Concrete (ACI 318-99)
ACI 318R-02 and Commentary (ACI 318R-02)

ACI 318R-02 Seminar Notes on ACI 318-02 Code Revisions

ACI 318-02 Notes on ACI 318-02 Building Code Requirements for Structural Concrete (2
copies)

ACI 318-11 Building Code Requirements for Structural Concrete (ACI 318-11)
and Commentary

ACI 325.6R-88 Texturing Concrete Pavements

ACI 325.9R-91 Guide to Construction of Concrete Pavements and Concrete Bases

Created by Rushikesh Mahale

 ACI library at San Jose State University

ACI 325.12R-02 Guide for Design of Jointed Concrete Pavements for Stress and Local Roads

ACI 330R-87 Guide for Design and Construction of Concrete Parking Lots

ACI 330R-92 Guide for Design and Construction of Concrete Parking Lots

ACI 330R-01 Guide for Design and Construction of Concrete Parking Lots

ACI 330.1-03 Specifications for Unreinforced Concrete Parking lots

ACI 332-04 Requirements for Residential Concrete Construction and Commentary

ACI 332-10 Residential Code Requirements for Structural Concrete (ACI 332-10)
and Commentary

ACI 332.1R-06 Guide to Residential Concrete Construction

ACI 332R-84 Guide to Residential Cast-in-Place Concrete Construction

ACI 334.1R-92 Concrete Shell Structures Practice and Commentary

ACI 336.1 Reinforced Specifications for the Construction of Drilled Piers

ACI 336.1R-98 ACI 336.1R-98 (ACI 336.1) and Commentary (ACI 336.1R-98)

ACI 336.1-01 Specification for the Construction of Drilled Pier

ACI 336.1-79 Standard Specifications for the Construction of End Bearing Drilled Piers
(ACI 336.1-79)

ACI 336.1-79 Standard Specifications for the Construction of End (ACI 349-76)

ACI 336.3R-93 Design and Construction of Drilled Piers

ACI 341.3R-07 Seismic Evaluation and Retrofit Techniques for Concrete Bridges

ACI 343R-88 Analysis and Design of Reinforced Concrete Bridge Structures

ACI 345-74 Recommended Practice for Concrete Highway Bridge Deck

Construction (ACI 345-74)

ACI 345-82 Standard Practice for Concrete Highway Bridge Deck Construction
(ACI 345-82)

Created by Rushikesh Mahale

 ACI library at San Jose State University
ACI 345.1R-83 Routine Maintenance of Concrete Bridges

ACI 345.1R-92 Routine Maintenance of Concrete Bridges

ACI 345.2R-98 Guide for Widening Highway Bridges

ACI 345R-11 Guide for Concrete Highway Bridge Deck Construction

ACI 346-01 Specification for Cast-in-Place Concrete Pipe

ACI 346-09 Specification for Cast-in-Place Concrete Pipe (An ACI Standard)

ACI 346-81 Specifications for Cast-in-Place Non-reinforced Concrete Pipe

ACI 346R-81 (ACI 346-81) and Recommendations for Cast-in-Place
Non-reinforced Pipe (ACI 346R-81)

ACI 346-90 Specifications for Cast-in-Place Non-reinforced Concrete Pipe ACI

ACI 346R-90 (ACI 346-90) and Recommendations for Cast-in-Place Non-reinforced
Pipe (ACI 346R-90)

ACI 347-01 Guide to Formwork for Concrete

ACI 347-04 Guide to Formwork for Concrete

ACI 347-68 Recommended Practice for Concrete Formwork (ACI 347-68)

ACI 347-78 Recommended Practice for Concrete Formwork (ACI 347-78)

ACI 347R-88 Guide to Formwork for Concrete

ACI 347R-03 Guide to Formwork for Concrete

ACI 347.2R-05 Guide for Shoring/Reshoring of Concrete Multistory Buildings

ACI 349-80 1984 Supplement to: Code Requirements for Nuclear Safety Related
Concrete Structures (ACI 349-80) and Commentary (ACI 349-80)

ACI 349-01 Code Requirements for Nuclear Safety Related Concrete Structures
ACI 349R-01 (ACI 349-01) and Commentary (ACI 349R-01)

ACI 349.1R-80 Reinforced Concrete for Thermal Effects on Nuclear Power Plant
Structures
ACI 349.2R-07 Guide to the Concrete Capacity Design (CCD) Method-Embedment Design
Examples

Created by Rushikesh Mahale

 ACI library at San Jose State University

ACI 349.3 R-02 Evaluation of Existing Nuclear Safety Related Concrete Structure

ACI 349-76 1978 Supplement to: Code Requirements for Nuclear Safety Related
Concrete Structures (ACI 349-76) and Commentary

ACI 350 Concrete Sanitary Engineering Structures Bearing Drilled

Piers (ACI 336.1-79) (Revised 1985)

ACI 350.3-06 Seismic Design of Liquid Containing Concrete Structures and Commentary

ACI 350.3-06 Seismic Design of Liquid Containing Concrete Structures and Commentary

ACI 350R-89 Environmental Engineering Concrete Structures

ACI 350-01 Code Requirements for Environmental Engineering Concrete

ACI 350R-01 Structures (ACI 350-01) and commentary (ACI 350R-01)

ACI 350.1-01 Tightness Testing of Environmental Engineering Concrete Structures

ACI 350.1R-01 (ACI 350.1-01) and Commentary (ACI 350. 1R-01)

ACI 350.2R-04 Concrete Structures for Containment of Hazardous Materials

ACI 350.3-01 Seismic Design of Liquid-Containing Concrete Structures (ACI 350.3-01) and
ACI 350.3R-01 Commentary (ACI 350.3R-01)

ACI 350.3-06 Seismic Design of Liquid-Containing Concrete Structures and Commentary

ACI 350.4R-04 Design Considerations for Environmental Engineering Concrete Structures

ACI 351.1R-93 Grouting for Support of Equipment and Machinery

ACI 351.2R-10 Report on Foundations for Static Equipment

ACI 351.3R-04 Foundations for Dynamics Equipment

ACI 352R-02 Recommendations for Design of Beam-Column Connection in Monolithic

Reinforced Concrete Structures

ACI 352.1R-11 Guide for Design of Slab-Column Connections in Monolithic Concrete

Structures

ACI 355.1R-91 State-of-the-Art Report of Anchorage to Concrete

Created by Rushikesh Mahale

 ACI library at San Jose State University
ACI 355.2-00 Evaluating the Performance of Post-Installed Mechanical Anchors in
ACI 355.2R-00 Concrete (ACI 355.2-00) and Commentary (ACI 355.2R-00)

ACI 355.2-01 Evaluating the Performance f Post-Installed Mechanical Anchors in

ACI 355.2R-01 Concrete (ACI355.2-01) and Commentary (ACI 355.2R-01)

ACI 355.3R-11 Guide for Design of Anchorage to Concrete: Examples Using ACI 318
Appendix D

ACI 355.3R-11 Guide for Design of Anchorage to Concrete: Examples Using ACI 318
Appendix D

ACI 357R-78 Guide for the Design and Construction of Fixed Offshore Concrete
Structures

ACI 357R-84 Guide for the Design and Construction of Fixed Offshore Concrete
Structures

ACI 357.1R-85 State-of-the-Art Report on Offshore Concrete Structures for the Arctic

ACI 357.2R-10 Report on Floating and Float-In Concrete Structures

ACI 357.2R-88 State-of-the-Art Report on Barge-Like Concrete Structures

ACI 358.1R-92 Analysis and Design of Reinforced and Prestressed-Concrete Guideway

Structures

ACI 360R-06 Design of Slabs on Ground

ACI 360R-06 Design of Slabs on Ground

ACI 360R-10 Guide to Design of Slabs-on-Ground

ACI 362R-85 State-of-the-Art Report on Parking Structures

ACI 363R-10 Report on High-Strength Concrete

ACI 363.2R-98 Guide to Quality Control and Testing of High-Strength Concrete

ACI 363.2R-11 Guide to Quality Control and Assurance of High-Strength Concrete

ACI 364.3R-09 Guide for Cementitious Repair Material Data Sheet

Created by Rushikesh Mahale

 ACI library at San Jose State University

ACI 369R-11 Guide for Seismic Rehabilitation of Existing Concrete Frame Buildings and
Commentary

ACI 371R-08 Guide for the Analysis, Design, and Construction of Elevated Concrete and
Composite Steel-Concrete Water Storage Tanks

ACI 371R-98 Guide for the Analysis, Design, and Construction of Concrete-Pedestal
Water Towers
ACI 372R-03 Design and Construction of Circular Wire- and Strand-Wrapped Prestressed
Concrete Structures

ACI 374.1-05 Acceptance Criteria for Moment Frames Based on Structural Testing
and Commentary

ACI 408R-03 Bond and Development of Straight Reinforcing Bars in Tension

ACI 408.2R-92 State-of-the-Art Report on Bond Under Cyclic Loads

ACI 408.3-01 Splice and Development Length of High Relative Rib Area Reinforcing
ACI 408.3R-01 Bars in Tension (408.3-01) and Commentary (408.3R-01)

ACI 408.3R-09 Guide for Lap Splice and Development Length of High Relative Rib Area
Reinforcing Bars in Tension and Commentary

ACI 421.2R-07 Seismic Design of Punching Shear Reinforcement in Flat Plates

ACI 421.2R-10 Guide to Seismic Design of Punching Shear Reinforcement in Flat Plates

ACI 423.3R-96 Recommendations for Concrete Members Prestressed with Unbonded

Tendons

ACI 423.3R-05 Recommendations for Concrete Members Prestressed with Unbonded

Tendons

ACI 423.4R-98 Corrosion and Repair of Unbonded Single Strand Tendons

ACI 423.6-01 Specification for Unbonded Single-Strand Tendons and Commentary

ACI423.6R-01

ACI-ASCE Committee 426: Suggested Revisions to Shear Provisions for Building Codes

ACI 423.9M-10 Test method for Bleed Stability of Cementitious Post-Tensioning Tendon
(metric) Grout (An ACI standard)

Created by Rushikesh Mahale

 ACI library at San Jose State University

ACI 435.9R-91 State-of-the-Art Report on Control of Two-Way Slab Deflections

ACI 437R-03 Strength Evaluation of Existing Concrete Buildings

ACI 437R-91 Strength Evaluation of Existing Concrete Buildings

ACI 437.1R-07 Load Tests of Concrete Structures: Methods, Magnitude, Protocols, and
Acceptance Criteria

ACI 439.3R-07 Types of Mechanical Splices for Reinforcing Bars

ACI 439.4R-09 Report on Steel Reinforcement-Material Properties and U.S. Availability

ACI 440.5-08 Specification for Construction with Fiber-Reinforced Polymer Reinforcing

Bars

ACI 440.6-08 Specification for Carbon and Glass Fiber-Reinforced Polymer Bar Materials
for Concrete Reinforcement (An ACI Standard)

ACI 440.1R-01 Guide for the Design and Construction of Concrete Reinforced with FRP Bars

ACI 440.1R-03 Guide for the Design & Construction of Concrete Reinforced with FRP Bars

ACI 440.2R-02 Guide for the Design and Construction of Externally Bonded FRP Systems for
Strengthening Concrete Structures

ACI 440.2R-08 Guide for the Design and Construction of Externally Bonded FRP Systems for
Strengthening Concrete Structures

ACI 440.3R-04 Guide Test Methods for Fiber-Reinforced Polymers (FRPs) For Reinforcing
or Strengthening Concrete Structures

ACI 440.4R-04 Prestressing Concrete Structures with FRP Tendons

ACI 440.7R-10 Guide for the Design and Construction of Externally Bonded Fiber-
Reinforced Polymer Systems for Strengthening Unreinforced Masonry
Structures

ACI 442R-88 Response of Concrete Buildings to Lateral Forces

ACI 446.1R-91 Fracture Mechanics of Concrete: Concepts, Models, and

Determination of Material Properties

Created by Rushikesh Mahale

 ACI library at San Jose State University
ACI 446.4R-04 Report on Dynamic Fracture of Concrete

ACI 503R-80 Use of Epoxy Compounds with Concrete

ACI 503R-80 Use of Epoxy Compounds with Concrete (Revised 1984)

ACI 503R-89 Use of Epoxy Compounds with Concrete

ACI Standards 503.1-79

503.2-79
503.3-79
503.4-79

ACI Standards 503.1-92

503.2-92
503.3-92
503.4-92

ACI 504 Guide to Joint Sealants for Concrete Structures

ACI 506.1R-08 Guide to Fiber-Reinforced Shotcrete

ACI 506.1R-98 Committee Report on Fiber Reinforced Shotcrete

ACI 506.2-77 Specifications for Materials Proportioning and Application of Shotcrete

(ACI 506.2-77)

ACI 506.5R-09 Guide for Specifying Underground Shotcrete

ACI 515.1R-79 A Guide to the Use of Waterproofing, Dampproofing, Protective, and

Decorative Barrier Systems for Concrete

ACI 522.1-08 Specification for Pervious Concrete Pavement (An ACI Standard)

ACI 522R-10 Report on Pervious Concrete

ACI 523.1R-06 Guide for Cast-in-Place Low-Density Cellular Concrete

ACI 523.1R-06 Guide for Cast-in-Place Low-Density Cellular Concrete

ACI 523.1R-92 Guide for Cast-in-Place Low-Density Concrete

ACI 523.4R-09 Guide for Design and Construction with Autoclaved Aerated Concrete panels

Created by Rushikesh Mahale

 ACI library at San Jose State University
ACI 524R-04 Guide to Portland Cement-Based Plaster

ACI 524R-08 Guide to Portland Cement-Based Plaster

ACI 524R-93 Guide to Portland Cement Plastering

ACI 530.1-88/ASCE 6-88 (Reference Manual)

ACI 530.1-88 Specifications for Masonry Structures (ACI 530.1-88/ASCE 6-88)

ACI 530-88 Building Code Requirements for Masonry Structures

(ACI 530-88/ASCE 5-88) and Specifications for Masonry Structures
(ACI 530.1-88/ASCE 6-88)

ACI 530-88 Building Code Requirements for Masonry Structures

(ACI 530-88/ASCE 5-88) and Specifications for Masonry Structures
(ACI 530.1-88/ASCE 6-88)

ACI 530-92/ASCE 5-92/TMS 402-92 Building Code Requirements for Masonry Structures
ACI 530-92/ASCE 5-92/TMS 402-92 Commentary on Building Code Requirements for
Masonry Structures
ACI 530.1-92/ASCE 6-92/TMS 402-92 Specifications for Masonry Structures
ACI 530.1-92/ASCE 6-92/TMS 602-92 Commentary on Specifications for Masonry
Structures

ACI 530-99/ASCE 5-99/TMS 402-99 Building Code Requirements for Masonry Structures
ACI 530.1-99/ASCE 6-99/TMS 602-99 Specification for Masonry Structures
ACI 530-99/ASCE 5-99/TMS 402-99 Commentary on Building Code Requirements for
Masonry Structures
ACI 530.1-99/ASCE 6-99/TMS 602-99 Commentary on Specification for Masonry Structures

ACI 530-02/ASCE 5-02/TMS 402-02 Building Code Requirements for Masonry Structures
ACI 530.1-02/ASCE 6-02/TMS 602-02 Specification for Masonry Structures
ACI 530-02/ASCE 5-02/TMS 402-02 Commentary on Building Code Requirements for
Masonry Structure
ACI 530.1-02/ASCE 6-02/TMS 602-02 Commentary on Specification for Masonry Structures

ACI 530-05/ASCE 5-05/TMS 402-05 Building Code Requirements for Masonry Structures
ACI 530.1-05/ASCE 6-05/TMS 602-05 Specifications for Masonry Structures
ACI 530-05/ASCE 5-05/TMS 402-05 Commentary on Building Code Requirements for
Masonry Structures
ACI 530.1-05/ASCE 6-05/TMS 605-05 Commentary on Specification for Masonry Structures

ACI 530-11/ASCE 5-11/TMS 402-11 Building Code Requirements for Masonry Structures

Created by Rushikesh Mahale

 ACI library at San Jose State University
ACI 530.1-11/ASCE 6-11/TMS 602-11 Specifications for Masonry Structures and Companion
Commentaries

ACI 530-08/ASCE 5-08/TMS 402-08 Building Code Requirements and Specification for
Masonry Structures
ACI 530.1-08/ASCE 6-08/TMS 602-08 Specifications for Masonry Structures \

ACI 531.1-76 Specification for Concrete Masonry Construction (ACI 531.1-76)(Revised

1981)

ACI 531-79 Building Code Requirements for Concrete Masonry Structures

ACI 531R-79 (ACI 531-79) and Commentary (ACI 531R-79)

ACI 531-79 Building Code Requirements for Concrete Masonry Structures

ACI 531R-79 (ACI 531-79) and Commentary (ACI 531R-79) (Revised 1983)

ACI 533.1R-02 Design Responsibility for Architectural Precast-Concrete Projects

ACI 544.3R-08 Guide for Specifying, Proportioning, and Production of Fiber-Reinforced

Concrete

ACI 544.5R-10 Report on the Physical Properties and Durability of Fiber-Reinforced

Concrete

ACI 546R-04 Concrete Repair Guide

ACI 546.2R-10 Guide to Underwater Repair of Concrete

ACI 546.2R-98 Guide to Underwater Repair of Concrete

ACI 548 Polymers in Concrete

ACI 548.1R-92 Guide for the Use of Polymers in Concrete

ACI 548.3R-03 Polymer-Modified Concrete

ACI 548.3R-09 Report on Polymer-Modified Concrete

ACI 548.3R-91 State-of-the-Art Report on Polymer-Modified Concrete

ACI 548.4-11 Specification for Latex-Modified Concrete Overlays

ACI 548.6R-96 Polymer Concrete – Structural Applications – State-of-the-Art Report

Created by Rushikesh Mahale

 ACI library at San Jose State University

ACI 548.8-07 Specification for Type EM (Epoxy Multi-Layer) Polymer Overlay for
Bridge and Parking Garage Decks

ACI 548.9-08 Specification for Type ES (Epoxy Slurry) Polymer Overlay for Bridge and
Parking Garage Decks (An ACI Standard)

ACI 548.10-10 Specification for Type MMS (Methyl Methacrylate Slurry) Ploymer Overlays
for Bridge and Parking Garage Decks

ACI 549.1R-88 Guide for the Design, Construction, and Repair of Ferrocement

ACI 549.2R-04 Report on Thin Reinforced Cementitious Products

ACI 549.3R-09 Report on Glass Fiber-Reinforced Concrete Premix

ACI 550R-93 Design Recommendations for Precast Concrete Structures

ACI 550.1R-01 Emulating Cast-in-Place Detailing in Precast Concrete Structures

ACI 550.1R-09 Guide to Emulating Cast-in-Place Detailing for Seismic Design of Precast
Concrete Structures

ACI 551.1R-05 Tilt-Up Concrete Construction Guide

ACI 551.2R-10 Design Guide for Tilt-Up Concrete Panels

ACI 555R-01 Removal and Reuse of Hardened Concrete

Created by Rushikesh Mahale

 ACI library at San Jose State University

ACI Bibliography No. 11 Foundations for Equipment and Machinery (Annotated)

ACI Bibliography No. 12 Torsion in Concrete (Annotated)

ACI Bibliography No. 14 History of Concrete, 30 BC to 1926 AD (Annotated)

ACI Educational Bulletin No. E1-78 Aggregates for Concrete

ACI Educational Bulletin No. E2-78 Reinforcing Steel – Its Use and Benefits in
Concrete

ACI Educational Bulletin No. E3-83 Hydraulic Cements for Concrete

ACI, Information for Members

ACI – SC 02-88 Silica Fume, Fly Ash, and Slags: Their Role in Making Better
Concrete (Annual Concrete Lecture- 1988)

ASTM: Cement, Concrete, and Aggregates, Vol. 1, No.2, 1979

ASTM: Cement, Concrete, and Aggregates, Vol. 2, No. 1, 1980

Aesthetics in Concrete Bridge Design: MP-1

Compilation 2 Concrete Construction

Compilation 16, ACI Quality Assurance in Concrete Construction

Compilation 20, ACI Repair and Rehabilitation II

Compilation 22, ACI Mineral Admixtures

Compilation 23, ACI Chemical Admixtures

Concrete Masonry Handbook; for Architects, Engineers, Builders

FAA- Standard Specifications for Construction of Airports (1968)

Guide to the Design of Anchor Bolts and Other Steel Embedments

(Authorized Reprint from Concrete International Design and Construction, July 1981 Vol.3
No. 7)

Journal of the American Concrete Institute Proceedings V. 76, No. 9, September 1979

Created by Rushikesh Mahale

 ACI library at San Jose State University

Journal of the American Concrete Institute Proceedings V. 76, No. 11, November 1979

Masonry Designers Guide

Nycon Inc., Nylon 6 Secondary Concrete Reinforcement

PCC Pavements for Low-Volume Roads and City Streets

(National Cooperative Highway Research Program, Synthesis of Highway Practice 27)

Problems for Mechanics (Preliminary Edition)

Standard Specifications for Public Works Construction (1969 Edition)

Created by Rushikesh Mahale

 ACI library at San Jose State University
ACI Manuals
(1) Manual of Concrete Practice, 1974 Part 1
Materials and Properties of Concrete Construction Practices and Inspection of
Pavements and Slabs

(2) ACI Manual of Concrete Practice, 1990 Part 1

Materials and General Properties of Concrete

(3) ACI Manual of Concrete Practice, 1990 Part 2

Construction Practices and Inspection Pavements

(4) ACI Manual of Concrete Practice, 1990 Part 3

Use of Concrete in Buildings – Design, Specifications, and Related Topics

(5) ACI Manual of Concrete Practice, 1990 Part 4

Bridges, Substructures, Sanitary, and Other Special Structures Structural Properties

(6) ACI Manual of Concrete Practice, 1990 Part 5

Masonry, Precast Concrete Special Processes

(7) Manual of Concrete Practice, 1992 Part 4

Bridges, Substructures, Sanitary, and Other Special Structures; Structural Properties

(8) Manual of Concrete Practice, 1992 Part 5

Masonry, Precast concrete, Special Processes

(9) Manual of Concrete Practice, 1999 Part 2

Construction Practices and Inspection of Pavements

(10) Manual of Concrete Practice, 1999 Part 3

Use of Concrete in Buildings – Design, Specifications, and Related Topics

(11) Manual of Concrete Practice, 1999 Part 4

Bridges, Substructures, Sanitary, and Other Special Structures; Structural Properties

(12) Manual of Concrete Practice, 1999 Part 5

Masonry, Precast Concrete, Special Processes

(13) Manual of Concrete Practice, 2001 Part 1

Materials and General Properties of Concrete

(14) Manual of Concrete Practice, 2001 Part 2

Construction Practices and Inspection of Pavements

Created by Rushikesh Mahale

 ACI library at San Jose State University

(15) Manual of Concrete Practice, 2001 Part 3

Use of Concrete in Buildings – Design, Specifications, and Related Topics

(16) Manual of Concrete Practice, 2001 Part 4

Bridges, Substructures, Sanitary, and Other Special Structures; Structural Properties

(17) Manual of Concrete Practice, 2001 Part 5

Masonry, Precast Concrete, Special Processes

(18) Manual of Concrete Estimating

(19) Manual of Concrete Inspection

(20) ACI Manual of Concrete Practice 2002 INDEX

(21) Manual of Concrete Practice, 2002 PART 1 ACI 104-71 (97) to ACI 223-98

(22) Manual of Concrete Practice, 2002 Part 2 ACI 224R-01 to ACI 313R-97

(23) Manual of Concrete Practice, 2002 Part 3 ACI 315-99 to ACI 343R-95

(24) Manual of Concrete Practice, 2002 Part 4 ACI 345R-91(97) to ACI 355.2/355.2R-01

(25) Manual of Concrete Practice, 2002 Part 5 ACI 357R-84(97) to ACI 503.6R-97

(26) Manual of Concrete Practice, 2002 Part 6 ACI 504R-90(97) to ACI T1.1/T1.1R-01

(27) ACI Manual of Concrete Practice 2003 Index

(28) ACI Manual of Concrete Practice, 2003Part 1 ACI 104-71(97) to ACI 223-98

(29) ACI Manual of Concrete Practice, 2003 Part2 ACI 224R-01 to ACI 313R-97

(30) ACI Manual of Concrete Practice, 2003 Part 3 ACI 315-99 to ACI 343R-95

(31) ACI Manual of Concrete Practice, 2003 Part 4 ACI 345R-91(97) to ACI 355.2/355.2R-01

(32) ACI Manual of Concrete Practice, 2003 Part 5 ACI 503.6R-97 to ACI 503.6R-97

(33) ACI Manual of Concrete Practice, 2003 Part 6 ACI 504R-90(97) to ACI T1.1-01/T1.1R-01

(34) ACI Manual of Concrete Practice 2004 Index

Created by Rushikesh Mahale

 ACI library at San Jose State University
(35) ACI Manual of Concrete Practice, 2004 Part 1 ACI 104-71(97) to ACI 223-98

(36) ACI Manual of Concrete Practice, 2004 Part 2 ACI 224R-01 to ACI 313R-97

(37) ACI Manual of Concrete Practice, 2004 Part 3 ACI 315-99 to ACI 343-95

(38) ACI Manual of Concrete Practice, 2004 Part 4 ACI 345R-91 to ACI 355.2/355.2R-01

(39) ACI Manual of Concrete Practice, 2004 Part 5 ACI 357-84(97) to ACI 503.6R-97(03)

(40) ACI Manual of Concrete Practice, 2004 Part 6 ACI 504R-90(97) to ACI T1.2-03/T1.2R-03

(41) ACI Manual of Concrete Practice 2005 Part 1

(42) ACI Manual of Concrete Practice, 2005 Part 1 Index

(43) ACI Manual of Concrete Practice, 2005 Part 1 ACI 104-71(97) to ACI 22.3-98

(44) ACI Manual of Concrete Practice, 2005 Part 2 ACI 224-01to ACI 313R-97

(45) ACI Manual of Concrete Practice, 2005 Part 3 ACI 315-99 to ACI 343R-05

(46) ACI Manual of Concrete Practice, 2005 Part 4 ACI 345R-91(97) to ACI 355.2/355.2R-04

(47) ACI Manual of Concrete Practice, 2005 Part 5 ACI 357R-84(97) to ACI 503.6R-97(03)

(48) ACI Manual of Concrete Practice, 2005 Part 6 ACI 504R-90(97) to ACI ITG-3-040..

(49) ACI Manual of Concrete Practice, 2009 Part 1 ACI 117-06 to ACI 224.3R-95(08)

(50) ACI Manual of Concrete Practice, 2009 Part 2 ACI 225R-99(05) to ACI 315-99

(51) ACI Manual of Concrete Practice, 2009 Part 3 ACI 318-08 to ACI 347.2R-05

(52) ACI Manual of Concrete Practice, 2009 Part 4 ACI 349-06 to ACI 360R-06

(53) ACI Manual of Concrete Practice, 2009 Part 5 ACI 362.1R-97(02) to ACI 503.7-07

(54) ACI Manual of Concrete Practice, 2009 Part 6 ACI 506R-05 to ACI ITG-5.1-07

(55) ACI Manual of Concrete Practice, 2009 Index

Created by Rushikesh Mahale