pr

catoduc
alo t
g

equip your genius

Parallax Inc.
599 Menlo Drive | Rocklin, CA | 95678 | USA

Telephone
All callers, including international
• Office: (916) 624-8333
• Fax: (916) 624-8003

Callers in the United States

• Toll-Free Sales: 888-512-1024
• Toll-Free Tech Support: 888-99-STAMP

Office/Sales/Technical Support hours are Monday through BASIC Stamp, Board

Of Education, Boe-Bot,
Friday from 8:00 a.m. to 5:00 p.m., Pacific Time. Scribbler, and SumoBot
are federally registered
Internet trademarks of Parallax
Inc.
• Main - http://www.parallax.com
• Learn - http://learn.parallax.com Parallax, the Parallax
logo, ActivityBot, ELEV-
• Forums - http://forums.parallax.com 8, HomeWork Board,
• Propeller Object Exchange - PING))), PropScope,
http://obex.parallax.com Scribbler, Spin, Spinner-
et are trademarks of

E-mail
Parallax Inc.

All products and

• [email protected] service names
• [email protected] mentioned herein are
• [email protected] the trademarks of
their respective (and
respected) owners.
Special thanks to: Courtney Jacobs, David Carrier, Emily Kurze, Forrest Bourke,
Jessica Uelmen, Kristina Stewart, Lauren Davis, and Stephanie Lindsay.
 MICROCONTROLLERS
02 Propeller C Learning System
03 Best-selling Propeller boards and kits
04 BASIC Stamp microcontroller
05 Best-selling BASIC Stamp boards and kits
06 Board Of Education Shield (for Arduino)
07 Where is the multicore Propeller used?
ROBOTS
08 Boe-Bot style robots
09 Boe-Bot robot accessories and add-ons
10 Scribbler 2 (S2) and SumoBot robots
11 Resources for educators
12 Robot platforms
13 Made in the USA
14 ELEV-8 multicopter and accessories
15 Motors and motor controllers
SENSORS
16 Sensors
22 Human input devices
ACCESSORIES
24 Wireless communication
27 Ethernet
28 Sound
29 Displays
Note: Since our catalogs are referred to by our
30 Tools
customers for many months, we reserve the right to
change prices without notice. Prices may vary be- 32 Power and solar
tween our ads and our catalogs. Product description,
typographic, pricing, and photographic errors are
unintentional and subject to change.

www.parallax.com | 888-512-1024 01
 Propeller
Multicore Microcontroller
The Propeller chip, which features eight 32-bit processors with a shared system clock and memory,
makes true independent and simultaneous multi-processing possible. The Propeller chip may be
programmed in our object-based Spin language, low-level Assembly, or C/C++. Users appreciate the
overall processing power, I/O capabilities and parallel processing capabilities. For more information on
commercial integration of the Propeller Chip see page 07.

NEW! Propeller Activity Board #32910; $49.99 Program in C with the Propeller Activity Board and the
new Propeller C Learning System. Harnessing the power of the 8-core Propeller microcontroller is now
easier than ever before. The built-in Propeller P8X32A programming system is pre-wired with the most
popular peripherals, making experimenting fast and fun.
Key Features:
• XBee socket
• microSD card holder
• Mini audio/stereo jack
• Six 3-pin headers
• Breadboard
• A/D and D/A converters
• Power via USB or power
supply/battery pack

Ac New
ti
on vityB
p o
08 age t
!

Our Propeller C Learning System of tutorials, example code, development boards, and software make it
easy to learn multicore programming in C.
• Easy Circuit Building The Propeller Activity Board is the primary platform for the new Propeller C
tutorials. Solder-free prototyping board and sockets for peripherals make it quick to build fun projects.
• SimpleIDE Software This free, open-source programming software works with our Propeller C tutorials.
• Simple Libraries These pre-written code libraries make it quick to add a variety of devices to your
project — just click the ‘Add Simple Library’ button. Explore the Simple Library Index, available from the
SimpleIDE Help menu. Each library has documentation you can browse.

02 www.parallax.com | 888-512-1024
online and on pages 22 and 27. P8X32A QuickStart Board #40000; $29.99
Find QuickStart accessory boards This open-source reference design provides
basic Propeller circuitry. The QuickStart is fully
expandable and provides unimpeded access to
all I/O pins through an expansion header and
includes button inputs and LEDs to demonstrate
programming. A great evaluation platform
for developing your commercial Propeller
microcontroller application.

Propeller Project Board USB #32810; $24.99 For dedicated projects. Soldering required.
Propeller Board Of Education #32900; $129.00 Loaded with peripherals and project possibilities.
Propeller Mini #32150; $24.99 Complete prototyping system with a small footprint.
Propeller Professional Development Board #32111; $149.99 Ample breadboard space and peripheral
connectors provide a playground for electronics projects. 40-pin P8X32A DIP chip included.

Propeller Education Kit (40-Pin DIP Version)

#32305; $99.99

This kit features breadboard-friendly versions

of the Propeller chip, EEPROM and other core
components making it easy and inexpensive
for students to experiment while being able to
replace parts as needed. Propeller Education Kit
Labs: Fundamentals book is a comprehensive
series of labs covering Setup and Testing, I/O and
Timing, Methods and Cogs, Objects, and Counter
Modules and Circuit Applications.

This kit is designed for those with previous

microcontroller programming and electronics
experience.

www.parallax.com | 888-512-1024 03
 The original
BASIC Stamp
A BASIC Stamp module is a single-board comput- When might you choose to use the BASIC
er that runs the Parallax PBASIC language. The Stamp? The BASIC Stamp is a good choice when
developer’s code is stored in EEPROM, which a well-documented module with plenty of free
can also be used for data storage. The PBASIC educational tutorials is required. Persons looking
language has easy-to-use commands for basic to learn programming, sensor control, home au-
I/O, like turning devices on or off, interfacing tomation, and robotics will find the BASIC Stamp
with sensors, etc. More advanced commands let to be the perfect tool. Experienced programmers
the BASIC Stamp interface with other integrated also enjoy its simplicity for quick projects.
circuits, communicate with each other, and oper-
ate in networks. The BASIC Stamp is available in
module or interpreter chip format.
BASIC Stamp modules (shown left to right):
Why should you use the BASIC Stamp? For those
• BASIC Stamp 1 (not pictured) #BS1-IC; $29.00
new to electronics, the PBASIC language is very
powerful yet very easy to learn. BASIC Stamp • BASIC Stamp 2 #BS2-IC; $49.00
programming is the perfect entry to technology
literacy. Parallax offers a wealth of free support, • BASIC Stamp 2sx #BS2SX-IC; $59.00
tutorials, and resources for learning how to pro- • BASIC Stamp 2e #BS2E-IC; $54.00
gram and design projects with the BASIC Stamp.
• BASIC Stamp 2p24 #BS2P24; $79.00
Where is the BASIC Stamp used? The BASIC • BASIC Stamp 2p40 (not pictured)
Stamp is used in technology education and as an #BS2P40; $89.00
easy-to-program, quick-to-implement solution in
many industries. Hobbyists and engineers alike are • BASIC Stamp 2pe #BS2PE-IC; $75.00
finding new uses for this powerful microcontroller
• BASIC Stamp 2px #BS2PX24; $79.00
every day.

04 www.parallax.com | 888-512-1024
 BASIC Stamp Board Of Education (BOE)
Serial #28150; $69.99 and USB #28850; $69.99
Originally designed in coordination with our
educational customers to teach microcontroller
programming. Even if you aren’t using our
curriculum, the ease of use and expandability
make the BOE an ideal project board for BASIC
Stamp 2 microcontroller experimentation.

The Board of Education Full Kit (USB) #28803;

$99.00 contains a Board of Education® carrier
board, BASIC Stamp® 2 module, jumper wires, and
USB cable to get you started with the hardware
basics.

Left to right: BASIC Stamp 1 Project Board #28150; $69.99 - BASIC Stamp HomeWork Board (USB) #555-
28188; $39.99 - Super Carrier Board #27130; $19.99 - Professional Development Board #28138; $129.99

B
se e
ll st
er
!

BASIC Stamp Activity Kit (USB) #90005; $79.00 BASIC Stamp Discovery Kit
No experience necessary. Learn circuit-building Serial #27207; $159.99 or USB #27807; $159.99
and programming on a BASIC Stamp HomeWork No experience necessary. Our most complete kit
board. Discover how it all works as you go step-by- for learning circuit building and programming
step through 40 hands-on activities. includes a BS2-IC module and a Board Of
Education.
www.parallax.com | 888-512-1024 05
 Compatible with your
Arduino
Board Of Education Shield (for Arduino)
#35000; $34.99
Plug the Board of Education Shield into your own
Arduino for convenient breadboard prototyping
and servo ports, with no soldering required.
Arduino programmers who appreciate Parallax’s
breadboard-friendly sensors and accessories will
find them even easier to use with this shield.
The Board of Education Shield is designed to be
physically compatible with any Arduino Uno or
Mega form-factor module. Visit learn.parallax.
com/BOEShield to explore the dozens of tutorials
and activities in our online book, Robotics with the
Board of Education Shield for Arduino.

The Board of Education Shield is available alone, or conveniently packaged with the
classic Boe-Bot chassis, servos, electronic components, and additional hardware in
the Robotics Shield Kit (#130-35000; $129.99 - more details on page 08).

Microcontroller KickStarts are basic, no-frills coding

samples, made so you can get started fast and are
available for many sensors and accessories we carry.
Each example takes no more than a few minutes to
set up and try. KickStarts provide working code and
connection diagrams for the Propeller, BASIC Stamp 2,
and Arduino Uno.

Propeller ASC+ #32214; $49.99

Use your Arduino shields with this multicore Pro-
peller microcontroller-driven board an program in
Find them here: http://learn.parallax.com/KickStart
Spin, Propeller assembly, C or C++.

06 www.parallax.com | 888-512-1024
Wher e is the multicor e Pr opeller used?

The multicore Propeller microcontroller is useful in new designs, including the following applications:

• Motor Control
• Human Interface Devices
• Robotics
• Data Acquisition
• Medical Devices
• Defense and Avionics Applications
• Control Systems

The Propeller has proven successful in many advanced technological applications. Customers select the
Propeller for its flexible multicore design, comprehensive support, and quick time to market.

FEATURE BENEFIT
Eight-Core Design Simplifies program architecture and reduces latency through the allocation of
independent I/O tasks to their own core, enabling true concurrent control and
eliminating the need for FPGAs in many applications.
Powerful Hardware Each core contains multiple PLLs and flexible counter modules, as well as a
Peripherals high-speed serializer with video capabilities.
Dynamic Software Multicore design allows dynamic reallocation of cores to perform software-
Peripherals defined tasks.
Flexible I/O Hardware and software peripherals run on any Propeller I/O pin, simplifying
PCB routing and allowing revisions in software instead of hardware.
Deterministic Clock-cycle accuracy and repeatability facilitates timing-sensitive applications.
Control
Online Object Code objects available from the Object Exchange at http://obex.parallax.com
Library provide instant functionality and powerful software peripherals for many
applications.
Field Application Parallax provides FAE assistance to provide quick answers and design
Engineer (FAE) assistance, from concept to manufacturing.
Support
Permissive open- A permissive license allows integration of reference designs into production
source hardware and hardware and software without non-disclosure agreements or derivative
software reference license hassles. Open-source development tools are available for Windows,
designs OS X, and Linux operating systems
Strong Community Customers appreciate the community’s development assistance, support, and
innovative design philosophy.

www.parallax.com | 888-512-1024 07
 Robots
No previous programming or electronics experience? No problem. Our robotics learning kits will show
you how. So are you ready to roll? Parallax has complete robot kits to get you started. Just choose your
microcontroller: Propeller, BASIC Stamp, or Arduino. Then simply build and program.

Why choose a Parallax robot? Our development boards have a breadboard to help you learn the hands-
on basics of circuit-building. This open platform combined with our wealth of support resources allow for
easy expansion with the addition of sensors and accessories.

NE
W
!

Propeller ActivityBot #32500* - This zippy Boe-Bot Robot Kit - Serial (w/USB adapter)
robot pairs the classic Boe-Bot chassis with the #28132; $159.99 and USB #28832; $159.99
multicore Propeller microcontroller. Our original BASIC Stamp-based Boe-Bot robot
is our most popular way to learn robotics
• Versatile Propeller Activity Board (see page 02)
programming. This kit comes with all hardware
perched atop our sturdy aluminum chassis.
and components including the printed Robotics
• High-speed servos go up to 3x faster than the
with the Boe-Bot text to aid in assembly and
classic Boe-Bot continuous rotation servos.
programming in PBASIC.
• Optical encoders and wheels with secure O-ring
tires ensure straight and consistent maneuvers.
Already own an Arduino? Just grab our Robotics
• Full online suite of tutorials.
Shield Kit (for Arduino) #130-35000; $129.99 and
• Includes additional electronic components
get rolling. Arduino microcontroller not included.
including infrared, whisker, light and ultrasonic
Tutorials for this robot kit based on the Robotics
sensors, plus a microSD card for data storage.
with the Boe-Bot lessons are available on our
• The Activity Board’s peripheral sockets and the
Learn site at learn.parallax.com/ShieldRobot.
chassis’ expansion slots allow for customization
with optional accessories.
*New product. See Parallax.com for pricing.
08 www.parallax.com | 888-512-1024
1 2 3

6 5

Note: Robot not included with any of the 5. Boe-Bot Crawler Kit #30055; $29.99 Give your
accessory kits on this page. Boe-Bot legs without modifying your code.

6. PING))) Mounting Bracket Kit #570-28015;

1. Digital Encoder Kit #28107; $39.99 Get wheel $24.99 and PING))) Ultrasonic Distance Sensor
position feedback to improve dead-reckoning, #28015; $29.99 Enable autonomous navigation
solve mazes, and map paths of travel. with a 180° sweep of the surroundings.

2. Boe-Bot Tank Tread Kit #28106; $34.99 Replace

the wheels of your robot with the gears and tread
in this kit to traverse unfriendly terrain.
Boe-Bot Refresher Pack
3. Li-ion Boe-Bot Power-Pack Charger #28988; #572-28132; $9.99
$44.99 Upgrade from the 4-cell AA battery pack Missing a few (or a lot
to provide up to 6 hours of continuous motorized of) Boe-Bot electronic
operation. Recommended for use with our High components? Consider
Capacity Li-ion Cell and 7.5 VDC, 1 Amp Power the Refresher Pack.
Supply (not included). It’s is the same bag of
electronic parts that ships
4. QTI Line Follower AppKit for the Boe-Bot with brand new Boe-Bot
#28108; $29.99 Enhance the line-following capa- Robot Kits. Every sensor, wire,
bility of your robot with this extra set of IR “eyes” capacitor, resistor, LED, phototransistor and piezo-
on the ground. speaker is included in this pack.

www.parallax.com | 888-512-1024 09
 Best for beginners:
Scribbler 2 (S2) Robot
• USB (w/Serial Adapter) #28336; $119.00
• Serial #28136; $109.99
No experience needed. Pre-programmed,
re-programmable, and hackable. The
Scribbler 2 (S2) robot is suitable for a whole
variety of programming skills. The Scribbler
2 robot arrives pre-programmed with eight
demo modes, including light seeking, object
detection, object avoidance, line following,
and art. Place a marker in the pen port and
it will scribble as it drives. Next, use the
Graphical User Interface (S2 GUI) tile-based
programming tools, or modify the Propel-
ler source code in our object based Spin
language. An especially handy download,
‘Robots For Beginners Workshop for the S2’ is
also available on our web site.

Ready to compete?
SumoBot Robot Competition Kit
#27402; $239.99 - Build and program two
SumoBot robots designed to battle in their
own mini-sumo competition ring. Follow
the SumoBot Manual assembly instructions
and test programs to go from basic moves
to one-on-one combat. Once you have your
SumoBot robots up and running, give them
a competitive edge and expand your skills
by following the step-by-step activities in
Applied Robotics with the SumoBot. Activities
in this advanced text include friction analysis,
self-calibrating sensors, memory optimization
with multipurpose variables and a sensor
flags register, and state-machine diagrams for
sensor-based navigation.

Additional purchasing option:

SumoBot Robot Kit #27400; $159.99
Includes electronics and hardware for a sin-
gle SumoBot robot and the SumoBot Manual.

10 www.parallax.com | 888-512-1024
Parallax Education
Worldwide Commitment to Education
For over 15 years Parallax has been committed to
STEM (science, technology, engineering, and math-
ematics) education. Parallax provides teachers,
students, and self-learners the material they need
to learn microcontroller and robotics program-
ming. A variety of educational texts and kits have
been designed for hands-on learning, starting from
circuit design and continuing to advanced robotics.
Schools around the world use Parallax tools and
hardware.

Parallax Education is Different

• Low Cost – Learners can get started with their own robot for around $200.
• Beginner friendly - No programming experience needed.
• Open platforms - Exposed circuitry allows you to learn and create your own electronic circuits.
• Solder free - Experiment with custom circuits on breadboards (no special-brand connectors).
• Texts & Tutorials – Texts and tutorials on Learn.parallax.com provide easy-to-follow tutorials.
• Programming – PBASIC, Spin or C for Propeller are easy to learn and introduce concepts found in most
programming languages.
• Expandable Platforms – Allows for add-on sensors, autonomous navigation, & hardware expansion kits.
• Trainings – Parallax educator trainings based on our kits take place around the world.
• Elementary to University Level – Customize activities and difficulty level. Pick the right hardware for
your level.
• Custom Kits – Combine our parts and make a special kit, just for your students to purchase on our site.
• Samples – Qualified teachers may send a sample kit request to [email protected].
• Forums – A public education forum as well as a private forum just for educators - includes solution
sets and presentations.

BASIC Stamp Multicore http://Learn. Tutorials & Educator

Education Education Parallax.com Translations Training Classes

Circuit building, Propeller C Teacher resourc- Find microcon- Attend a class

PBASIC pro- learning es, tutorials, troller texts and learn about
gramming, and system with applications, and guides teaching with
robotics with circuit building, testimonials, translated in the BASIC Stamp
the BASIC Stamp programming, and contest over 10 different or Propeller mi-
microcontroller. and robotics. ideas. languages! crocontrollers.

www.parallax.com | 888-512-1024 11
 Robot Platform Kits: Assembly Required
18” Round Robot Base #28960* and 18” Round
Upper Deck #28965* A high-quality, 3/8” thick
disc machined in the USA. Ideal for medium-sized
autonomous robotics system development, this
sturdy platform can handle indoor and outdoor
environments quite well. HDPE is a perfect mate-
rial for a robot base because it can be drilled, cut,
modified, and shaved with common wood-work-
ing tools and it’s impervious to water so it won’t
swell, crack, or splinter like wood.

Ready to build your own custom mid-sized

robot? Parallax offers robotic platforms,
wheel kits, development boards, sensors,
components, hardware, and accessories to
bring your robot to life.
*New products. See Parallax.com for pricing.

Wild Thumper Robotics Kit #28192; $350.00 This Dagu Rover 5 Tracked Robot Chassis with
platform is rugged and designed to excel at tra- Encoders #28190; $49.99 This tracked chassis makes
versing rough terrain and steep inclines, making it a great base for building a small tank-like RC vehicle
a great platform for performing tasks in a complex or autonomous robot. The chassis includes a battery
outdoor environment. The unique suspension holder and two DC motors; with an independent
system acts to keep each wheel in contact with drive train and a quadrature encoder for each tread.
the ground to enable maximum traction, even You supply a robot controller and the sensors of your
over rough or bumpy terrain. Includes a Propeller choosing.
Project Board and HB-25 Motor Controllers.

12 www.parallax.com | 888-512-1024
Parallax produces its core products and
knowledge in Rocklin, California, to speed the
prototype to production process while using
the most appropriate manufacturing process
for the product’s design. Learn more about
Motor Mount and Wheel Kit Rev.B with Position
our manufacturing process.
Controller #28962* Precision machined, mechan-
ical drive system designed primarily for mobile
When we use our “Made in robotic platforms. The motors are worm-gear driv-
the USA” sticker en, and the main drive axle (1/2” dia.) is cradled in
a ball-bearing assembly, assuring smooth-rolling
• The core of the product has undergone a performance for your robotic creation.
substantial transformation from raw materi-
als to the finished good Caster Wheel Kit Rev.B
#28961* One of the
• The cost of our labor (manufacturing and highest quality caster
overhead) in relation to the total product’s wheels available; this kit
cost exceeds 75% was designed to work well
with the Motor Mount and
Parallax Manufacturing Wheel Kit with Position
Controller.
Our board production process:
1. Solder Paste Printer adds soldering paste.
2. Pick and Place Machine places
components on board.
3. Reflow oven heats paste and solders
components on board.
4. Boards are visually inspected, tested, and
packaged for sale.
36-Position Quadrature Encoder Set #29321;
$29.99 Provides rotational feedback for the Motor
Mount and Wheel Kit with Position Controller and
other 1/2 inch axle systems.

www.parallax.com | 888-512-1024 13
 ELEV-8

ELEV-8 Quadcopter Kit #80000; $599.00 This fly-

ing robotic platform is lifted and propelled by four
fixed rotors. Aircraft stabilization is electronically
controlled by the HoverFly board with Parallax’s
Propeller multicore microprocessor. Kit includes:
frame, mounting hardware, motors, speed con-
trollers, propellers and the control board for flight
stabilization. The only thing you need to provide is
the RC radio equipment and a battery. We recom-
mend a six channel RC radio.

The ELEV-8 platform is large enough for outdoor

flight and has plenty of room for payload and
attachments (up to 2 lbs).
ELEV-8 Hex Upgrade Kit #80040; $179.00 Add 2
Key Features: more pounds of payload capacity to your copter.
• Open under-body for mounting accessories
• Modular frame allows for fast repairs and parts ELEV-8 Crash Pack #80080;
swapping $44.99 Includes the com-
• High-strength chassis keeps your electronic ponents most commonly
components safe and protected damaged in a crash. Get
• Uses common 4-40 mounting hardware that can back in the air quickly.
be found at most local hardware stores
ELEV-8 Airframe & Hard-
Application Ideas: ware Kit #80090; $179.99
• Land mapping and surveying Use the electronic com-
• Real-estate observations ponents of your choosing,
• Aerial video while beginning with a high
quality airframe as your
This kit is not for beginners, it requires a moderate foundation.
amount of mechanical skill to build and fly. The
kit requires an average of 8 hours to assemble; RC
experience is highly recommended. Visit our web site for more ELEV-8 accessories.

14 www.parallax.com | 888-512-1024
1
Motor Control
2 1. HB-25 Motor Controller #29144; $49.99
Control up to 2 DC motors as simply as you would
servos.

2. Propeller Servo Controller USB #28830; $39.99

Control up to 16 servos.

3 3. Little Step-U #27938; $69.99 Control a unipolar

stepper motor with full step, half step and wave
drive modes.

4. Motor Mind B #27961; $29.99 Provides DC mo-

4 tor speed and directional control. (6 to 30 VDC).

5. Dual Motor Driver MC33926 #28820; $29.99

5 Can supply up to 2.5 A continuous current per
channel to two brushed DC motors at 5 – 28 V.

6. Geared Motor 12 V, 200 RPM #750-90003;

$19.99 Powerful 12 V DC Geared Motor with 200
6 RPM output provides the necessary power to be
the muscle in your next robot.

7. Continuous Rotation Servo #900-00008; $12.99

and Standard Servo (not pictured) #900-00005;
$12.99

8. High Speed Continuous Rotation Servo #900-

7 00025; $16.99 An excellent drive motor for small,
zippy robots this servo has about 3 times the RPM
8 of our original continuous rotation servo. Easily
Ne control bi-directional rotation via simple pulse
w! width modulation.

9. Vibration Motor Flat Coin #28821; $3.99

and Vibration Motor Capsule #28822; $4.99
Use for feedback of handheld devices, touch
screen feedback, emergency alerting, simula-
tions, video gaming, and other operator feedback
applications.

www.parallax.com | 888-512-1024 15
 Sensors
Ping))) Ultrasonic Distance Sensor #28015;
t
es !
$29.99 Provides an easy method of distance mea-
B ler surement. This sensor is perfect for any number of
l
se applications that require you to perform measure-
ments between moving or stationary objects.

Additional accessories:
Ping))) Mounting Bracket Kit #570-28015; $24.99
Ping))) Protector Stand #725-28015; $14.99
and Acrylic Ping))) Stand with Hardware
#725-32008; $8.99

Enhance your project! Parallax sensor modules are designed to be high-quality, easy-to-use and have a
minimal footprint. Many of our sensors are compatible with most 3.3 V and 5 V microcontrollers.

Sensor Sampler #28028; $159.99 Distance sensor, Passive Infrared (PIR) sensor, Col-
This collection of modules pro- orPAL, Piezo Film Vibra Tab, Memsic 2125 Acceler-
vides a wide variety of different ometer, MMA7455 3-Axis Accelerometer Module
sensors for experimentation. The and Sensirion Temperature and Humidity Sensor;
kit includes our most popular sen- which can be used together or independently to
sors, including the Ping))) Ultrasonic create an elaborate project.

16 www.parallax.com | 888-512-1024
Acceleration & Tilt

Gyroscope Module 3-Axis L3G4200D #27911; Memsic 2125 Dual-Axis Accelerometer #28017;
$29.99 Provides orientation data in X, Y, and Z co- $29.99 This dual-axis thermal accelerometer is
ordinates. Raw angular rate and temperature data capable of measuring tilt, acceleration, rotation,
measurements are accessed from the selectable and vibration with a range of ±3 G.
digital I2C or SPI interface.
MMA7455 3-Axis Accelerometer Module #28526;
Compass Module 3-Axis HMC5883L #29133; $29.99 A low power sensor capable of measuring
$29.99 Designed for low-field magnetic sensing acceleration along its X, Y, and Z axes. It offers
with a digital interface. Perfect to give precise several integrated features including an analog to
heading information. digital converter (ADC), digital low-pass filter, and
selectable sensitivity ranges of ±2 G, ±4 G, or ±8 G.
Altimeter Module MS5607 #29124; $29.99
Measures height above sea level using barometric 4-Directional Tilt Sensor #28036; $9.99 Optical
pressure. This high resolution (20 cm) altimeter system provides positional feedback in four direc-
sensor will give extremely accurate altitude, pres- tions. Measures tilt forward, backward, right-side
sure, and temperature readings. and left-side.

Gas
Gas Sensor Board #27983; $24.99 Our updated Gas Sensor Board is socketed, so just grab the gas sensor
component of your choice and plug it in. Board interfaces to a microcontroller with only two I/O pins.

• Carbon Monoxide Gas Sensor #605-00007; $5.99 • Propane Gas Sensor #605-00009; $4.99
• Methane Gas Sensor #605-00008; $4.99 • Alcohol/Benzine Gas Sensor #605-00011; $4.99

www.parallax.com | 888-512-1024 17
 GPS
PMB-648 GPS SiRF Internal Antenna #28500; $39.99 Features 20 parallel satellite-tracking channels for
fast acquisition. Outputs NMEA0183 v2.2 data for robotics navigation, telemetry, or experimentation.
There is a built-in patch antenna, rechargeable battery for memory and RTC backup, cable for power, and
TTL and RS-232 connections. Not compatible with the external antenna.

PMB-688 GPS SiRF Internal/External Antenna #28501; $39.99 Features 20 parallel satellite-tracking chan-
nels for fast acquisition. Outputs NMEA0183 v2.2 data for robotics navigation, telemetry, or experimenta-
tion. There is a built-in patch antenna as well as a connection for an external one, rechargeable battery for
memory and RTC backup, cable for power, and TTL connection. Compatible with the external antenna.

External GPS Antenna (PMB-688) #28502; $9.99 Allow your PMB-688 GPS receiver to lock onto more
satellites, to increase its accuracy.

Wearables
FLORA GPS Starter Pack #28507; $99.95 Looking
for the perfect way to get started with wearable
electronics? Look no further than the FLORA GPS
Starter Kit. Developed by Adafruit Industries,
this kit contains all the components necessary to
complete several fun wearable projects. Robust,
beginner-friendly microcontroller platform for
both sewing and electronics novices. Includes a
variety of sensors able to power a myriad of wear-
able projects. Compatible with Li-Ion/Li-Poly, LiFe,
alkaline or rechargeable NiMh/NiCad batteries of
any size, providing power flexibility. Application
ideas include: location-aware clothing,
night-time jogging attire, and wearable remote
control.

18 www.parallax.com | 888-512-1024
 IR (infrared)
1

1. Si1143 Gesture Sensor #28046; $29.99 Read

non-contact gestures for microcontroller appli-
cations. Detect up, down, left, right and center
select gestures by measuring infrared light levels
from the three onboard IR LEDs.
2
2. QTI Sensor #555-27401; $9.99 An IR emitter/
receiver that is able to differentiate between a
dark surface (low IR reflectivity) and a light surface
(high IR reflectivity). Great for line following, maze
navigation, or sensing the outer rim of a SumoBot
ring. Can be used digitally for fast black/white line
following, or as an analog sensor to detect differ-
ent shades of gray.
3
3. PIR Sensor #555-28027; $10.99 The Passive
Infrared (PIR) Sensor detects motion by measur-
ing changes in heat through the infrared levels
emitted by surrounding objects. When motion is
detected, the PIR sensor outputs a high signal on
its output pin.

4. Pololu IR Beacon Transceiver #28049; $27.99

This beacon and receiver pair can be used to build
4 pairs of robots that interact or chase one another,
or to make a robot that can identify and return to
a home base. Ideal for autonomous robot con-
tests in which robots compete in pairs.
5
5. Sharp IR Sensor #28995; $12.99 Measure dis-
tance using a beam of infrared light reflected off
an object. Using triangulation of the beam of light
to calculate the distance, this sensor provides con-
sistent and reliable readings. The sensor outputs
an analog voltage corresponding to the distance
of the object, and can easily be read using an
6 inexpensive analog to digital converter (ADC) chip.
Easily mount your Sharp IR Sensor to your project
with the (6.) Acrylic IR Stand with Hardware
#725-28995; $8.99

www.parallax.com | 888-512-1024 19
 Laser Rangefinder #28044; $99.99 This sensor uses laser technology to calculate the distance to a target-
ed object. The design uses a Propeller processor, CMOS camera, and laser diode. Distance to a targeted
object is calculated by optical triangulation using simple trigonometry between the centroid of laser light,
camera, and object. Measure up to 8 feet with optimal range of 6-48 inches with <5% accuracy error.

Color & Light

ColorPAL #28380; $19.99 To sense color, the Col- The following two modules plug directly into
orPAL uses its LED to illuminate a sample, one col- the BASIC Stamp-2pe Motherboard (#28300),
or component at a time, along with a broad-spec- Propeller Backpack (#28327), or interface to any
trum light-to-voltage converter to measure the other boards using the optional DB-Expander SIP
light reflected back. The amount of light reflected Converter (#28325).
from the sample under illumination from each
red, green, and blue LED is used to determine the TCS3200-DB Color Sensor #28302; $59.99 A com-
sample’s color. plete color detector, including a TAOS TCS3200
RGB sensor chip, white LEDs, collimator lens, and
TSL235R Light to Frequency Converter standoffs to set the optimum sensing distance.
#604-00084; $2.99 and TSL237 Light to Frequency Able to read small color swatches.
Converter #604-00085; $2.99 A silicon photodiode
and a current-to-frequency converter on a single TSL1401 Linescan Sensor Daughterboard #28317;
integrated circuit. Converter outputs a square $49.99 Provides one-dimensional sight to almost
wave (50% duty cycle) with frequency directly any microcontroller allowing you to recreate an
proportional to light intensity. It is TTL compatible, image from a scan. Includes the TAOS TSL1401R
allowing direct interface to a microcontroller or 128-pixel sensor chip, a 7.9 mm focal length imag-
other logic circuitry. UV-to-visible light range of ing lens, and control electronics to aid in capturing
320 nm to 700 nm and responds to light range of images for evaluation. It produces a clocked ana-
320 nm to 1050 nm. log data output, whose voltage levels correspond
to the light intensity at each pixel.

20 www.parallax.com | 888-512-1024
Temperature & Pressure & Flex
Humidity Flexiforce Sensor Kit (25 lbs.) #30056; $24.99 This
ultra-thin (0.008 in.) flexible sensor can be easily
Sensirion Temperature/Humidity integrated into force measurement applications.
Sensor #28018; $42.99 Humid- With this kit you can: detect and measure a
ity can be difficult to measure, relative change in force or applied load; detect
requiring external circuitry and many and measure the rate of change in force; identify
calculations by most other sensors. With force thresholds and trigger appropriate action; or
our module, all your microcontroller has to do is detect contact and/or touch.
read out the temperature and humidity values
through the two-wire digital serial interface. The
resolution of the sensor is quite remarkable and is
excellent for commercial or home-based projects
that require a high degree of resolution.

HS1101 Humidity Sensor #27920; $8.99 SCP1000 Pressure Sensor Module

Based on a unique capacitive cell, this #29135; $24.99 This absolute pres-
relative humidity sensor component is sure sensor can detect atmospheric
designed for high-volume applications pressure from 30-120 kPa. The
such as office automation, automotive pressure data is internally calibrated and tempera-
cabin air control, home appliances, and ture-compensated. The SCP1000 also provides
industrial process control systems. It is also useful temperature data and has 4 measurement modes
in all applications where humidity compensation as well as standby and power-down
is needed. mode.

LM34 Temperature Sensor #604-00011;

$6.99 The LM34 is a precision Fahrenheit
temperature sensor in a standard TO-92 eTape Liquid Level
package suitable for remote applications or Sensor #29131;
direct PCB mounting. The LM34 has a wide $39.99
operating voltage range of 5 to 30 volts DC
and a temperature range of +32° to +212°F. The eTape Liquid
Level Sensor is a
solid-state sensor. Output
resistance varies depending
on the surface height of the fluid.
It’s primarily designed to be used in
non-corrosive water-based liquids and
dry fluids (powders). It does away with clunky
mechanical floats, and easily interfaces with
electronic control systems. Due to its internal ge-
ometry, the resistance value can change by height
level increments of 1/32 inch (0.79 mm).

www.parallax.com | 888-512-1024 21
 Human Input Devices
Human Interface Board for QuickStart #40003;
$29.99 The Human Interface Board stacks directly
on top of the QuickStart development platform
(see page 03), creating a minimal footprint for
both boards. With multiple audio and video
outputs and keyboard or mouse inputs, as well
as a microSD card socket, the Human Interface
Board can add an interactive interface to any
project. Where applicable, the Human Interface
Board uses the same I/O pin assignments as the
Propeller Demo Board peripherals. Like the Quick-
Start development platform, the Human Interface
Board is an open-source hardware design, so all
design files are available under licenses that allow
free distribution and reuse.

Optical Finger Navigation (OFN) Module #27903;

$19.99 OFN technology is similar to the technolo-
gy used in optical mice, and movement across the
sensor can be read by any microcontroller using
I2C communication. Built-in center select button
and onboard red LED which illuminates when fin-
ger movement is detected. Great for video game
input and user input for computing devices.

Trackball Module #27908; $15.99 Similar to the Piezo Film Vibra Tab #605-00004; $2.50 This
trackball once found on smart phones, this sensor vibration sensor is model LTD0, manufactured
is easily portable and can be used to replace a by Measurement Specialties. Whether used as
mouse in many applications. The Trackball Module a vibration sensor or a flexible switch, piezo film
comes with a built in center select switch and a is an interesting sensor to interface with Parallax
red LED which can be programmed to light up the microcontrollers. For example, it is easy to use
trackball when desired. with the COUNT or PULSIN commands on a BASIC
Stamp.
22 www.parallax.com | 888-512-1024
 1
2 4

1. 2-Axis Joystick #27800; $3.99 Add analog input

to your next project. Contains two independent
potentiometers (one per axis) for reporting the
joystick’s position. The modular form-factor
allows you to plug the 2-Axis Joystick directly into
a breadboard for easy prototyping. The 2-Axis
Joystick includes spring auto return-to-center and
a comfortable cup-type knob.
5
2. 5-Position Switch #27801; $9.99 Perfect for
video game & robot controllers, the 5-Position
Switch is a normally open contact switch. It has a
nice snappy feel and returns to the center position
immediately when released.

3. Incremental Rotary Encoder #27805; $4.99

This encoder provides 16 pulses per revolution
via 2-bit quadrature outputs. 3-pin SIP header
provides easy breadboard connection. This en-
coder rotates continuously through 360 degrees
and provides detent to hold position. Used with a
pushbutton this encoder could provide a complete 5. IR Remote for the Boe-Bot Parts Kit and Text
menu/input system for your microcontroller. #28139; $34.99 This 175-page text focuses on
adding infrared communication and control to
4. Propeller Peripherals Kit #32311; $99.99 Ex- your Boe-Bot robot. You can directly control the
plore the power of the Propeller microcontroller robot, game-controller style, remotely set roaming
with this keyboard, mouse, and display. Driver speed and distance, combine remote control and
objects are provided with our Propeller Tool autonomous roaming functions, and remotely se-
software; use and modify the example objects or lect autonomous roaming modes. Boe-Bot robot
write your own. not included (see page 08).

www.parallax.com | 888-512-1024 23
 Wireless Communication
XBee 802.15.4 Starter Kit #32450; $179.99 XBee
modules provide a versatile RF communication
solution for BASIC Stamp and Propeller microcon-
troller projects. Ready to use for bi-directional,
point-to-point communication in their default
state, XBee modules can also support complex
networking with additional configuration via serial
commands sent from your microcontroller, or
through Digi’s free X-CTU software. The tutorial BASIC Stamp
introduces basic and advanced setups with XBee and/or Propeller
802.15.4 projects you can do on your desktop. It microcontroller
features both BASIC Stamp and Propeller code ex- development
amples, allowing you to see similar code running board not
included.
in both of these Parallax microcontrollers.

PCB Antenna Modules:

• XBee 1 mW PCB Antenna (XB24-API-001) These adapter boards provide an easy
#32404; $21.99 interface to the XBee/XBee Pro modules by
• XBee PRO 60 mW Chip Antenna converting the 2 mm pin spacing to bread-
(XBP24-ACI-001) #32406; $36.99 board-friendly 0.1 inch spacing.
Wire Antenna Modules:
• XBee 1 mW Wire Antenna (XB24-AWI-001)
#32405; $21.99 Adapter Boards (some soldering required):
• XBee PRO 60 mW Wire Antenna • XBee USB Adapter Board #32400; $23.99
(XBP24-AWI-001) #32407; $36.99 • XBee 5V/3.3V Adapter Board #32401; $14.99
• XBee ZigBee PRO S2B 63 mW Wire Antenna • XBee SIP Adapter #32402; $27.99
(XBP24BZ7WIT-004) #32408; $37.99 • XBee Adapter Board #32403; $2.99
• XBee ZigBee 1.25 mW Wire Antenna
(XB24-Z7WIT-004) #32409; $24.99
Not compatible with other modules:
• XBee 900HP Module #32411; $39.00 and
Digi 900 MHz Antenna #32410; $20.00

24 www.parallax.com | 888-512-1024
Our RFID Reader Modules are convenient solutions to read EM 4100 low-frequency (125 kHz) passive
RFID transponder tags. RFID Reader Modules can be used in a wide variety of hobbyist and commercial
applications, including access control, automatic identification, robotics, navigation, inventory tracking,
payment systems, and car immobilization.

U.S. Patent Nos. RE40,145; 5,817,207;

6,036,099; 6,214,155; 6,514,367; and
6,557,766

• RFID Reader Module (Serial) #28140; $42.99 Read-compatible only tags:

• RFID Reader Serial + Tag Sampler RFID 54 x 85 mm Rectangle Tag #28141; $2.50
#32390; $47.99 RFID 50 mm Round Tag #28142; $1.99
Compatible w/most 3.3 and 5 V microcontrollers. RFID Nail Tag #28446; $2.99
RFID Clear Disc Tag #28449; $2.49
• RFID Reader Module (USB) #28340; $42.99 RFID 30 mm Epoxy Disc Tag #28448; $2.49
• RFID Reader USB + Tag Sampler #32395; $47.99 RFID 12.4 mm Round Tag #28445; $2.49
Compatible with most personal computers.

USBg
comoinn!
so
RFID Read/Write Module (Serial) #28440; $49.99
Reads and writes EM4x50 transponder tags. Com-
patible with most 3.3 and 5 V microcontrollers.

Read/write-compatible tags:
R/W 54 x 85 mm Rectangle Tag #28441; $2.89
R/W 20 mm Round Tag #32398; $2.49
R/W 30 mm Round Tag #32399; $2.49

www.parallax.com | 888-512-1024 25
 433 MHz RF Transceiver #27982; $39.99 Send and
receive serial data wirelessly over a radio link be-
tween microcontrollers. Low power consumption
makes it ideal for use in battery-powered applica-
tions. Provides a range of up to 250 feet. Includes
a receive signal strength indicator to determine
when another transceiver is present.

RN-42 Bluetooth Module #30086; $49.99 Remote

control a robot! Communicate wirelessly between
two devices such as a microcontroller, PC, cell
phone, or another module using Bluetooth. This
module can pair-up with devices supporting Blue-
tooth SPP (Serial Port Profile) to establish a serial
interface. Auto-connect/discovery/pairing modes
make connecting to other modules easy. This
module is breadboard friendly and is compatible
with 3.3 and 5 V microcontroller platforms. Low
power consumption for long-lasting battery-pow-
ered projects.

Smart Cards
Smart Card Reader #32320; $9.99 Smart cards are
about the size of a credit card with an embedded
IC for storing data. Our Smart Card Reader can be
used with the compatible smart cards for a variety
of applications such as security systems, data stor-
age, tracking systems, and identity authentication.
Easy to interface to most microcontrollers. Reads
and writes data to standard memory-based smart
cards (not compatible with microprocessor-based
smart cards). Card detect switch allows confirma-
tion of smart card insertion.

IS23SC4442 Smart Card #32321; $0.99

256 x 8-bit memory with 3-byte programmable
security code for write/erase protection

IS24C16A Smart Card #32322; $1.29

2048 x 8-bit memory

IS24C02A Smart Card #32323; $0.99

256 x 8-bit memory, no security code

26 www.parallax.com | 888-512-1024
Ethernet

Spinneret Web Server, Version 1.0 #32203;

$59.99 A stand-alone Ethernet solution. Build your
own embedded networked control system with
this open source Ethernet-based development
board for the Propeller microcontroller. The serial
EEPROM has 32 KB for storing a Propeller program
and 32 KB for non-volatile data storage, inde- WIZnet Ethernet Board for QuickStart (W5200)
pendent of a microSD card. Web page content, #40002; $49.99 Add Ethernet capability to your
files, and logs can be stored on a microSD card. A Propeller QuickStart board (see page 03). An ex-
real-time clock controller can time-stamp files and cellent evaluation tool. Serve data to an Ethernet
events, and the backup capacitor will keep the network or even the Internet. The WIZnet W5200
clock running through extended power outages. chip provides an Ethernet-to-SPI bridge which is
The serial programming header has two auxiliary interfaced with Parallax’s 8-core microcontrol-
I/O connections, one for level-shifted open collec- ler; the Propeller P8X32A. The data served to a
tor communications over a three-pin data/power/ network can be anything you want – web pages,
ground cable, and the other is a 12-pin socket for serial data, email, and more.
direct 3.3 volt I/O connections. The circuit board
contains eight status LEDs, plus two that are
repeated on the Ethernet jack.

WIZNet Chips. Full-featured, single-chip 10/100

Ethernet controllers with built-in TCP/IP stacks
provide a stable high-performance network
connection in a small footprint using minimal mi-
crocontroller resources. IEEE 802.3 10BASE-T and
802.3u 100BASE-TX compliant.

W5100 WIZnet Chip #604-05100;

$5.00 Four sockets and a 16-kilobyte
buffer with a parallel or SPI interface,
WIZ812MJ Ethernet SPI/Bus Module #605-05110; for legacy applications.
$24.95 Add network capabilities to a project, or
develop a design around the WIZNet W5100 net- W5200 WIZnet Chip #605-05200;
work controller. The built-in TCP/IP stack provides $5.00 Eight sockets and a 32 kB buffer
a high-reliability Ethernet connection and requires with a high-speed SPI interface – more
minimal resources from the host microcontroller. throughput using fewer I/O pins.

www.parallax.com | 888-512-1024 27
 Sound/Audio 1

1. Emic 2 Text-to-Speech Module #30016; $59.99

Give your project a voice! Designed by Grand 2
Idea Studio, the Emic 2 Text-to-Speech Module is
a multi-language voice synthesizer that converts
a stream of digital text into natural sounding
speech. Its simple command-based interface
makes it easy to integrate into any embedded
system.
3
2. FM Radio Receiver Module #27984; $14.99 The
RDA5807SS FM stereo radio tuner chip provides
an easy way for your microcontroller to receive lo-
cal FM radio stations. Using the onboard antenna
and headphone jack, you can easily create your
own portable radio.

3. AP-16 Audio Player #31316; $129.99 Play

high-quality, stereo WAV files from a standard
SD card through two, booming 20 W amplifiers
(one per channel). Control is as simple as loading
up your SD card! Advanced features like built-in
randomization, auxiliary inputs, and the ability to
use dry-contact, (optically isolated) 12 to 24 DC, or
a PIR (or compatible) sensor put the AP-16+ in a
class of its own.

4. Sound Impact Sensor #29132; $8.99 Build a

4
noise-activated alarm system. Sensor detects
sound from up to 3 meters away, lending noise-ac-
tivation possibilities to your microcontroller
projects.
5
5. SoundPAL #28825; $14.99 A tiny module that
plays canned and custom sound sequences. In-
cludes a microcontroller for generating the sounds
and a small speaker for producing them. You can
easily interface with a BASIC Stamp and you can
play sounds while the microcontroller is busy with
other tasks. 6

6. Veho 360 Speaker #900-00018; $14.99 Large

audio in a compact package. Has a built in re-
chargeable battery. Great for mobile audio.

28 www.parallax.com | 888-512-1024
 Displays
7. Our serial LCDs (liquid crystal displays) can be
easily connected to and controlled by a microcon-
7 troller using a single I/O pin. The displays provide
basic text wrapping and full control over all of the
advanced LCD features. Visible ASCII characters
Dec 32-127) are supported. In addition, you may
define up to eight of your own custom characters
to display anywhere on the LCD.
• 4 x 20 Serial LCD (Backlit) #27979; $42.99
• 2 x 16 Serial LCD (Non-Backlit) #27976; $27.99
8 • 2 x 16 Serial LCD (Backlit) #27977; $29.99

8. 8 x 8 RGB LED Matrix Display Module #32324;

$39.99 Add 64 brilliant, colorful LEDs to your next
project! Each pixel in the display’s 8 x 8 matrix
can display millions of different colors. Based on
the Propeller P8X32A, the display comes pre-pro-
grammed with feature-rich firmware supported by
a detailed command set. Control the module from
a single microcontroller I/O pin.
9
9. Mini LCD A/V Color Display #603-32000;
$89.99 This 7” LCD TV can receive broadcast and
baseband NTSC and ATSC video signals. It features
a 480 x 234 pixel color screen and built-in speak-
ers. It includes an antenna and a power supply
and has a built-in battery. Conveniently porta-
ble, this product can display NTSC video output
generated by the Propeller chip or any other
device which has an Audio/Composite Video Out
connector.
10
10. Add multimedia and interactivity to your proj-
ect in astounding color! Simple serial connection
to your favorite microcontroller. Use the expand-
able memory space for multimedia files, including
movie clips or sound files. Cable included.
• 3.2” LCD Touch Screen Display with Adapter
and 2 GB micro-SD Card #28080; $106.00
• 3.2” LCD Touch Screen Display #28083; $79.99
• 2.8” LCD Touch Screen Display #28082; $69.99
• Programming Adapter #28072; $19.99

www.parallax.com | 888-512-1024 29
 Tools
1. Our soldering kits include a PanaVise circuit
board holder, soldering iron, diagonal cutters, 1
tip-cleaning sponge, roll of (leaded) solder, a
standoff holder for the solder roll, and mounting
hardware.
• Pro Soldering Tool Kit #700-10018; $199.00
Includes a Hakko #FX888D soldering station, and a
hand-held vacuum solder sucker.
• Basic Soldering Kit (not pictured) #700-10011;
$79.00 Includes a Hakko #508 soldering iron.

2. Make cutting and stripping wires fast and easy.

Flush cut with one end and auto strip with the
other end of this versatile tool.
• 6” Two-in-One Wire Cutter & Stripper
#700-10002; $12.99 2
• 5” Two-in-One Wire Cutter & Stripper
#700-10001; $9.99

3. Propeller Memory Card #40004; $17.99 Add

32 megabits of flash memory, one megabit of
SRAM, and a microSD card socket to a breadboard
project, or plug it directly into a Human Interface
Board (page 22) on a Propeller QuickStart. Not
BASIC Stamp compatible.

4. SD Card Adapter Kit #32313; $14.99 Solder-

ing and assembly required. Allows you to easily
connect an SD Card to your Propeller project. Not 3
BASIC Stamp compatible.

5. microSD Card Adapter #32312; $14.99 Easily

connect a microSD Flash Memory Card to your 4 5
Propeller project. Not BASIC Stamp compatible.
This adapter contains the components required
for an SPI interface between the host micro-
controller and a microSD card, such as the 1 GB
microSD Card #32318; $7.99 (sold separately).

6. Parallax USB to Serial (RS-232) Adapter 6

• Adapter Only #28030; $14.99
• With USB Cable #28031; $17.99

30 www.parallax.com | 888-512-1024
PropScope USB Oscilloscope #32220; $199.99 A two-channel oscilloscope that is capable of reading 25
million samples per second with ten bits of resolution over one, two, ten, or twenty volt peak-to-peak
waveforms. Power is provided through the USB port. A PropScope DAC card is included, providing an
analog trigger, a four-bit digital trigger, an eight-bit digital to analog converter, and a four-bit NTSC/PAL
output. The included software provides a traditional scope interface along with auto measurements and
the ability to store and export waveforms.

Understanding Signals with the PropScope Parts & Text Kit #32225; $229.00 This kit includes the Prop-
Scope USB oscilloscope, electronic components for breadboard circuits, and a printed text that guides you
step-by-step from the basics through advanced electronic measurement techniques.

Logic Analyzer #32314; $149.99 This is a must- Memory Stick Datalogger #27937; $39.99 Con-
have tool for analyzing, evaluating and “seeing” nect a USB mass-storage device to your BASIC
digital serial communication signals. Monitors Stamp or Propeller microcontroller and share the
up to 8 Channels. Saves up to 10 billion samples. files with your PC using simple serial commands.
Supports: Windows, Mac or Linux. This device is ideal for remote logging of large
quantities of data.

www.parallax.com | 888-512-1024 31
 Power and Solar 1

1. 34 Watt Solar Panel Kit #33000; $139.99 A do-

it-yourself system that can produce up to 34 watts
of clean electrical energy. Assembly and soldering
required.

Solar Panels:
2. 18 V, 10 W, 340 x 280 mm #750-00032; $59.99
3. 9 V, 1 W, 135 x 135 mm #750-00031; $9.99
4. 6 V, 1 W, 125 x 63 mm #750-00030; $9.99

5. Li-Ion Power Pack:

• Full Kit (Charger w/2 Cells) #28989; $59.99
2 3 4
• 2-Cell Charger Only #28986; $52.99
• High Capacity Li-Ion Cell #28987; $7.99
An integrated storage cell and charging system on
a single 3 x 4 inch printed circuit board. Compat-
ible with most 18650-size Li-Ion cells. 7.5 VDC, 1
Amp Power Supply recommended (not included).

6. Tenergy TB6B Balance Charger #752-00009; 5

$89.99 An all-in-one charger that supports mul-
tiple battery packs and types for all your applica-
tions. Charge batteries and balance LiFe and LIPO
battery packs to ensure longer cycle and battery 6
life.

7. Light Commander #27109; $29.99 A multi-out-

put user-programmable power controller. Origi-
7
nally designed as a light controller on the ELEV-8
quadcopter, it is also suitable for switching of high
currents under programmable control in other
applications.

Turn lights, fans and other devices on/off while

keeping them isolated from your microcontroller.
8. Single Relay Board #27115; $9.99 Control
high-power devices (up to 10 A) via the on-board
8 9
relay - friendly to servo cables and convenient to
connect to many development boards.
9. Dual Relay Board Kit #27114; $24.99 Control
two high-power devices up to 8 A each via the
included Omron mechanical relays. Soldering and
assembly required.

32 www.parallax.com | 888-512-1024
NEED
IT
NOW?
Parallax microcontrollers, boards, kits,
sensors, and accessories can be found
in your local Fry’s, Micro Center, and
RadioShack stores.
 Parallax Inc. PRESORTED STANDARD
599 Menlo Drive U.S. POSTAGE PAID
Rocklin, CA 95765 ROSEVILLE, CA
USA PERMIT #944

Build the circuit on the cover. It’s easy!

Find out what it does! Go to our Learn site for schematics, directions and sample code.
We show you how.

For Propeller: http://learn.parallax.com/project/propeller-tilt-tones

For BASIC Stamp: http://learn.parallax.com/project/basic-stamp-tilt-tones