Scribd Logo
Upload

Welcome to Scribd!

  • 14 views

    Color: GE Power & Water Water & Process Technologies

    Uploaded by

    teena6506763
    This document provides instructions for using a DR3900 spectrophotometer to test the color of water samples in platinum-cobalt (PtCo) units. It outlines the 3 step process: 1) select the color program, 2) prepare a distilled water blank and zero the instrument, 3) insert the water sample and take a reading, with results displayed in PtCo units. Notes emphasize zeroing the instrument with distilled water for accurate results when testing multiple samples. No reagents are required for this color test.

    Copyright:

    © All Rights Reserved
    Download as DOC, PDF, TXT or read online from Scribd

    Color: GE Power & Water Water & Process Technologies

    Uploaded by

    teena6506763
    14 views1 page
    This document provides instructions for using a DR3900 spectrophotometer to test the color of water samples in platinum-cobalt (PtCo) units. It outlines the 3 step process: 1) select the color program, 2) prepare a distilled water blank and zero the instrument, 3) insert the water sample and take a reading, with results displayed in PtCo units. Notes emphasize zeroing the instrument with distilled water for accurate results when testing multiple samples. No reagents are required for this color test.

    Original Description:

    Color Measurement Water Treatment Sample

    Original Title

    Color Updated

    Copyright

    © © All Rights Reserved

    Available Formats

    DOC, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides instructions for using a DR3900 spectrophotometer to test the color of water samples in platinum-cobalt (PtCo) units. It outlines the 3 step process: 1) select the color program, 2) prepare a distilled water blank and zero the instrument, 3) insert the water sample and take a reading, with results displayed in PtCo units. Notes emphasize zeroing the instrument with distilled water for accurate results when testing multiple samples. No reagents are required for this color test.

    Copyright:

    © All Rights Reserved
    Download as DOC, PDF, TXT or read online from Scribd
    Download as doc, pdf, or txt
    14 views1 page

    Color: GE Power & Water Water & Process Technologies

    Uploaded by

    teena6506763
    This document provides instructions for using a DR3900 spectrophotometer to test the color of water samples in platinum-cobalt (PtCo) units. It outlines the 3 step process: 1) select the color program, 2) prepare a distilled water blank and zero the instrument, 3) insert the water sample and take a reading, with results displayed in PtCo units. Notes emphasize zeroing the instrument with distilled water for accurate results when testing multiple samples. No reagents are required for this color test.

    Copyright:

    © All Rights Reserved
    Download as DOC, PDF, TXT or read online from Scribd
    Download as doc, pdf, or txt
    of 1

    GE Power & Water

    Water & Process


    Technologies

    Color

    Range: as PtCo (unit)


    Method: DR 3900 (Spectrophotometric)
    Testing Time: 5 min

    1. Select the Program Color using the DR3900.

    Blank Preparation

    2. Fill 50mm cell with distilled water sample. This will be the Blank.

    Reading

    3. Wipe then Insert the blank into the cell holder and press Zero.

    4. Fill 50mm cell with “Water sample”. Wipe it and insert it into the cell holder and
    press Read.

    5. Results are in PtCo units.

    Notes:

     Always use the distilled water and Press Zero, before taking sample readings,
    especially in case of multiple samples to insure the accurate results.

    Reagents Required

    No Reagents needed to perform this test.

    You might also like