Scribd Logo
Upload

Welcome to Scribd!

  • 256 views

    Basement Wall Design Sheet

    Uploaded by

    Suman Resolved Neupane
    The document provides specifications for designing a shear wall, including: 1) Soil properties like height, water table depth, unit weights; 2) Wall properties such as thickness, grade of concrete and steel; 3) Calculations for main reinforcement bar area and spacing to resist the design bending moment of 54.79 kNm. 4) Calculation of distribution bar area and spacing of 300 mm to be provided.

    Copyright:

    © All Rights Reserved
    Download as XLSX, PDF, TXT or read online from Scribd

    Basement Wall Design Sheet

    Uploaded by

    Suman Resolved Neupane
    256 views2 pages
    The document provides specifications for designing a shear wall, including: 1) Soil properties like height, water table depth, unit weights; 2) Wall properties such as thickness, grade of concrete and steel; 3) Calculations for main reinforcement bar area and spacing to resist the design bending moment of 54.79 kNm. 4) Calculation of distribution bar area and spacing of 300 mm to be provided.

    Original Description:

    basement wall design

    Copyright

    © © All Rights Reserved

    Available Formats

    XLSX, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document provides specifications for designing a shear wall, including: 1) Soil properties like height, water table depth, unit weights; 2) Wall properties such as thickness, grade of concrete and steel; 3) Calculations for main reinforcement bar area and spacing to resist the design bending moment of 54.79 kNm. 4) Calculation of distribution bar area and spacing of 300 mm to be provided.

    Copyright:

    © All Rights Reserved
    Download as XLSX, PDF, TXT or read online from Scribd
    Download as xlsx, pdf, or txt
    256 views2 pages

    Basement Wall Design Sheet

    Uploaded by

    Suman Resolved Neupane
    The document provides specifications for designing a shear wall, including: 1) Soil properties like height, water table depth, unit weights; 2) Wall properties such as thickness, grade of concrete and steel; 3) Calculations for main reinforcement bar area and spacing to resist the design bending moment of 54.79 kNm. 4) Calculation of distribution bar area and spacing of 300 mm to be provided.

    Copyright:

    © All Rights Reserved
    Download as XLSX, PDF, TXT or read online from Scribd
    Download as xlsx, pdf, or txt
    of 2

    DESIGN OF SHEAR WALL

    1 Height of soil = 3 m
    2 Height of water table (hw) 2 m assume full saturation
    3 Dry unit weight of soil (re) 18 kN/m3
    4 Submerged unit weight of soil (rsub) 10 kN/m3
    5 Unit weight of water (rw) 9.81 kN/m3
    6 Height of dry soil(h) 1 m
    7 Surcharge 0 kN/m2
    8 Equivalent ht. of surcharge (hs) 0.00 m
    9 Friction angle 30 Degree 0.523599 Rad
    10 Active earth pressure coefficient(ka) 0.33
    11 Span between column 3.00 m
    12 Thickness of wall 175 mm
    14 Grade of concrete 20 M20
    15 Grade of steel 415 Fe 415
    16 Clear cover 15 mm
    Diameter of bar used 16 mm
    Effective depth of 152 mm

    Main Bar calculation


    17 Design moment 54.79 kNm
    18 R=Mu/bd2 2.3713 OK
    19 Pt. required 0.785
    20 Ast. 1192.5013 mm2
    21 Spacing required 168.60521 mm
    Spacing provided 150 mm

    22 Distribution bar
    Distribution bar = 0.12 %
    Ast. = 210 mm2
    Dia. Of bar provided = 10 mm
    Spacing required = 373.99913 mm
    Spacing provided = 300 mm

    You might also like