The document provides specifications for several L6D load cell models with capacities ranging from 2.5 kg to 50 kg. The load cells are made of aluminum alloy, have an IP65 rating, and are suitable for scales and benches. Key specifications include accuracy classes, output sensitivity, number of intervals, terminal resistance, temperature range, and dimensions.
The document provides specifications for several L6D load cell models with capacities ranging from 2.5 kg to 50 kg. The load cells are made of aluminum alloy, have an IP65 rating, and are suitable for scales and benches. Key specifications include accuracy classes, output sensitivity, number of intervals, terminal resistance, temperature range, and dimensions.
The document provides specifications for several L6D load cell models with capacities ranging from 2.5 kg to 50 kg. The load cells are made of aluminum alloy, have an IP65 rating, and are suitable for scales and benches. Key specifications include accuracy classes, output sensitivity, number of intervals, terminal resistance, temperature range, and dimensions.
The document provides specifications for several L6D load cell models with capacities ranging from 2.5 kg to 50 kg. The load cells are made of aluminum alloy, have an IP65 rating, and are suitable for scales and benches. Key specifications include accuracy classes, output sensitivity, number of intervals, terminal resistance, temperature range, and dimensions.
2.5 kg C3D1 L6D-C3D-2.5kg-0.40B (-R12) 3 kg C3 L6D-C3-3kg-0.40B (-R12) 5 kg C3 L6D-C3-5kg-0.40B (-R12) 6 kg C3 L6D-C3-6kg-0.40B (-R12) 8 kg C3 L6D-C3-8kg-0.40B (-R12) 10 kg C3 L6D-C3-10kg-0.40B (-R12) 15 kg C3 L6D-C3-15kg-0.40B (-R12) Aluminium-Alloy IP65 single point load cell. 20 kg C3 L6D-C3-20kg-0.40B (-R12) Colourless anodized 30 kg C3 L6D-C3-30kg-0.40B (-R12) 35 kg C3 L6D-C3-35kg-0.40B (-R12) Suitable for pricing scales, bench scales, etc. 40 kg C3 L6D-C3-40kg-0.40B (-R1 ) 2 Maximum platform size: 250 x 350 mm 50 kg C3 L6D-C3-50kg-0.40B (-R12)
Specifications: 2 Accuracy class OIML R60 C3 C3D / C3G Output sensitivity mV/V 2.0 ± 0.2 1 Maximum capacity ( Emax ) kg 2.5 , 3, 5, 6, 8, 10, 15, 20, 30, 40, 50, 75 Maximum number of load cell intervals ( nLC ) 3000 2500 / 4000 3 3 Ratio of minimum LC verification interval Y = Emax / vmin 5000, 6000 or 7000 5000 / 11000 Combined Error %FS ± 0.0200 0.0280 / 0.0127 Minimum dead load kg 0 Safe overload of Emax 150 % Ultimate overload of Emax 300 % Zero balance of FS < ± 2.0 % Excitation, recommended voltage V 5 ~ 12 Excitation maximum V 18 Terminal resistance, input Ω 409 ± 6 1065 ± 15 Terminal resistance, output Ω 350 ± 3 1000 ± 10 Insulation impedance MΩ ≥5000 ( at 50VDC ) Temperature range, compensated °C -10 ~+40 Temperature range, operating °C -35 ~ +65 Element material Aluminium Recommended torque on fixation bolts Nm <30kg: 6 ≥30kg:10 Ingress Protection (according to EN 60529) IP65 Note 1: 2.5kg is not OIML approved Note 2: Applies only for type R1 ( =1000 Ω) Note 3: Y-value is shown on the load cell label
